Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory :  /usr/local/lib64/perl5/Moose/Manual/

Upload File : current_dir [ Writeable ] document_root [ Writeable ]

# PODNAME: Moose::Manual::Roles
# ABSTRACT: Roles, an alternative to deep hierarchies and base classes

__END__

=pod

=encoding UTF-8

=head1 NAME

Moose::Manual::Roles - Roles, an alternative to deep hierarchies and base classes

=head1 VERSION

version 2.2206

=head1 WHAT IS A ROLE?

A role encapsulates some piece of behavior or state that can be shared between
classes. It is something that classes I<do>. It is important to understand that
I<roles are not classes>. You cannot inherit from a role, and a role cannot be
instantiated. We sometimes say that roles are I<consumed>, either by classes
or other roles.

Instead, a role is I<composed> into a class. In practical terms, this
means that all of the methods, method modifiers, and attributes defined in a role are
added directly to (we sometimes say "flattened into") the class that
consumes the role. These attributes and methods then appear as if they
were defined in the class itself. A subclass of the consuming class
will inherit all of these methods and attributes.

Moose roles are similar to mixins or interfaces in other languages and are
based on the L<original concept of Traits|http://scg.unibe.ch/research/traits/>
for the Smalltalk-80 dialect Squeak.

Besides defining their own methods and attributes, roles can also
require that the consuming class define certain methods of its
own. You could have a role that consisted only of a list of required
methods, in which case the role would be very much like a Java
interface.

Note that attribute accessors also count as methods for the
purposes of satisfying the requirements of a role.

=head1 A SIMPLE ROLE

Creating a role looks a lot like creating a Moose class:

  package Breakable;

  use Moose::Role;

  has 'is_broken' => (
      is  => 'rw',
      isa => 'Bool',
  );

  sub break {
      my $self = shift;

      print "I broke\n";

      $self->is_broken(1);
  }

Except for our use of L<Moose::Role>, this looks just like a class
definition with Moose. However, this is not a class, and it cannot be
instantiated.

Instead, its attributes and methods will be composed into classes
which use the role:

  package Car;

  use Moose;

  with 'Breakable';

  has 'engine' => (
      is  => 'ro',
      isa => 'Engine',
  );

The C<with> function composes roles into a class. Once that is done,
the C<Car> class has an C<is_broken> attribute and a C<break>
method. The C<Car> class also C<does('Breakable')>:

  my $car = Car->new( engine => Engine->new );

  print $car->is_broken ? 'Busted' : 'Still working';
  $car->break;
  print $car->is_broken ? 'Busted' : 'Still working';

  $car->does('Breakable'); # true

This prints:

  Still working
  I broke
  Busted

We could use this same role in a C<Bone> class:

  package Bone;

  use Moose;

  with 'Breakable';

  has 'marrow' => (
      is  => 'ro',
      isa => 'Marrow',
  );

See also L<Moose::Cookbook::Roles::Comparable_CodeReuse> for an example.

It's possible to compose existing roles into new roles. For example, we can
have a C<HandleWithCare> class which applies both the C<Breakable> and
C<Package> roles to any class which consumes it:

  package HandleWithCare;

  use Moose::Role;

  with 'Breakable', 'Package';

=head1 REQUIRED METHODS

As mentioned previously, a role can require that consuming classes
provide one or more methods. Using our C<Breakable> example, let's
make it require that consuming classes implement their own C<break>
methods:

  package Breakable;

  use Moose::Role;

  requires 'break';

  has 'is_broken' => (
      is  => 'rw',
      isa => 'Bool',
  );

  after 'break' => sub {
      my $self = shift;

      $self->is_broken(1);
  };

If we try to consume this role in a class that does not have a
C<break> method, we will get an exception.

You can see that we added a method modifier on C<break>. We want
classes that consume this role to implement their own logic for
breaking, but we make sure that the C<is_broken> attribute is always
set to true when C<break> is called.

  package Car

  use Moose;

  with 'Breakable';

  has 'engine' => (
      is  => 'ro',
      isa => 'Engine',
  );

  sub break {
      my $self = shift;

      if ( $self->is_moving ) {
          $self->stop;
      }
  }

=head2 Roles Versus Abstract Base Classes

If you are familiar with the concept of abstract base classes in other
languages, you may be tempted to use roles in the same way.

You I<can> define an "interface-only" role, one that contains I<just>
a list of required methods.

However, any class which consumes this role must implement all of the
required methods, either directly or through inheritance from a
parent. You cannot delay the method requirement check so that they can
be implemented by future subclasses.

Because the role defines the required methods directly, adding a base
class to the mix would not achieve anything. We recommend that you
simply consume the interface role in each class which implements that
interface.

=head1 CONSUMING ROLES

Roles are consumed using the C<with> function.

Most of the time, you should only use one C<with>, even if you are consuming
multiple roles. If you consume roles using multiple C<with> statements Moose
cannot detect method conflicts between those roles.

Roles can be consumed by classes or by other roles. When a class consumes a
role which in turn consumes other roles, the class gets all of the roles
applied at once.

=head2 Required Methods Provided by Attributes

As mentioned before, a role's required method may also be satisfied by an
attribute accessor. However, the call to C<has> which defines an attribute
happens at runtime. This means that you must define the attribute I<before>
consuming the role, or else the role will not see the generated accessor.
These attributes are L<Moose Attributes|Moose::Manual::Attributes>.

  package Breakable;

  use Moose::Role;

  requires 'stress';

  ########

  package Car;

  use Moose;

  has 'stress' => (
      is  => 'ro',
      isa => 'Int',
  );

  with 'Breakable';

In general, we recommend that you always consume roles I<after> declaring all
your attributes.

It may also be the case that a class wants to consume two roles where one role
has an attribute providing a required method for another. For example:

  package Breakable;

  use Moose::Role;

  requires 'stress';

  ########

  package Stressable;

  use Moose::Role;

  has 'stress' => (
      is  => 'ro',
      isa => 'Int',
  );

  ########

  package Car;

  use Moose;

  # XXX - this will not work
  with 'Breakable', 'Stressable';

However, this won't work. The problem is that the accessor methods created for
the C<stress> attribute won't be present in the class when the required method
checks are done.

There are two possible workarounds. The recommended one is to use "stub"
subroutine(s) in the role providing the accessor(s):

  package Stressable;

  use Moose::Role;

  sub stress;
  has 'stress' => (
      is  => 'ro',
      isa => 'Int',
  );

The C<sub stress;> line is called a "forward" declaration in the Perl
documentation. It creates what is called a "stub" subroutine, a declaration
without a body. This is good enough to satisfy the required method checks done
by Moose. The stub will not interfere with the creation of a real subroutine
later.

The other alternative is to use two separate calls to C<with> in the consuming
class:

  package Car;

  use Moose;

  # Not recommended
  with 'Stressable';
  with 'Breakable';

Each C<with> is run as it is seen. The first call will consume just the
C<Stressable> role, which will add the C<stress> attribute to the C<Car>
package, which in turn will create an accessor method named C<stress>. Then
when the C<Breakable> role is consumed, the method it requires already exists.

However, as mentioned earlier, multiple C<with> declarations are not
recommended, because method conflicts between the roles cannot be seen. In the
example above, if both C<Stressable> and C<Breakable> contained methods of the
same name, what would happen is that the version in C<Stressable> would
I<silently> override the one in C<Breakable>.

=head1 USING METHOD MODIFIERS

Method modifiers and roles are a very powerful combination.  Often, a
role will combine method modifiers and required methods. We already
saw one example with our C<Breakable> example.

Method modifiers increase the complexity of roles, because they make
the role application order relevant. If a class uses multiple roles,
each of which modify the same method, those modifiers will be applied
in the same order as the roles are used:

  package MovieCar;

  use Moose;

  extends 'Car';

  with 'Breakable', 'ExplodesOnBreakage';

Assuming that the new C<ExplodesOnBreakage> role I<also> has an
C<after> modifier on C<break>, the C<after> modifiers will run one
after the other. The modifier from C<Breakable> will run first, then
the one from C<ExplodesOnBreakage>.

=head1 METHOD CONFLICTS

If a class composes multiple roles, and those roles have methods of
the same name, we will have a conflict. In that case, the composing
class is required to provide its I<own> method of the same name.

  package Breakdancer;

  use Moose::Role;

  sub break {

  }

If we compose both C<Breakable> and C<Breakdancer> in a class, we must
provide our own C<break> method:

  package FragileDancer;

  use Moose;

  with 'Breakable', 'Breakdancer';

  sub break { ... }

A role can be a collection of other roles:

  package Break::Bundle;

  use Moose::Role;

  with ('Breakable', 'Breakdancer');

When a role consumes another a role, the I<consuming> role's methods silently
win in any conflict, and the consumed role's methods are simply ignored.

=head1 METHOD EXCLUSION AND ALIASING

If we want our C<FragileDancer> class to be able to call the methods
from both its roles, we can alias the methods:

  package FragileDancer;

  use Moose;

  with 'Breakable'   => { -alias => { break => 'break_bone' } },
       'Breakdancer' => { -alias => { break => 'break_dance' } };

However, aliasing a method simply makes a I<copy> of the method with
the new name. We also need to exclude the original name:

  with 'Breakable' => {
      -alias    => { break => 'break_bone' },
      -excludes => 'break',
      },
      'Breakdancer' => {
      -alias    => { break => 'break_dance' },
      -excludes => 'break',
      };

The excludes parameter prevents the C<break> method from being composed
into the C<FragileDancer> class, so we don't have a conflict. This
means that C<FragileDancer> does not need to implement its own
C<break> method.

This is useful, but it's worth noting that this breaks the contract
implicit in consuming a role. Our C<FragileDancer> class does both the
C<Breakable> and C<BreakDancer>, but does not provide a C<break>
method. If some API expects an object that does one of those roles, it
probably expects it to implement that method.

In some use cases we might alias and exclude methods from roles, but
then provide a method of the same name in the class itself.

Also see L<Moose::Cookbook::Roles::Restartable_AdvancedComposition> for an example.

=head1 OVERLOADING

When a Moose role uses overloading, that overloading is composed into any
classes that consume the role. This includes the setting of the C<fallback>
value for that role's overloading. Just as with methods and attributes, when a
role consumes another role, that other role's overloading settings are applied
to the role.

Just as with methods, there can be conflicts with overloading implementations
between multiple roles when they are all consumed by a class. If two roles
both provide different overloading implementations for a given operator, that
is a conflict. If two roles both implement overloading and have different
C<fallback> values, that is also considered a conflict. These conflicts are
detected when multiple roles are being composed into a class together.

When a role consumes another role, the consuming role's overloading fallback
and operator implementations silently "win" the conflict.

=head1 ROLE EXCLUSION

A role can say that it cannot be combined with some other role. This
should be used with great caution, since it limits the re-usability of
the role.

  package Breakable;

  use Moose::Role;

  excludes 'BreakDancer';

=head1 ADDING A ROLE TO AN OBJECT INSTANCE

You may want to add a role to an object instance, rather than to a class. For
example, you may want to add debug tracing to one instance of an object while
debugging a particular bug. Another use case might be to dynamically change
objects based on a user's configuration, as a plugin system.

The best way to do this is to use the C<apply_all_roles()> function from
L<Moose::Util>:

  use Moose::Util qw( apply_all_roles );

  my $car = Car->new;
  apply_all_roles( $car, 'Breakable' );

This function can apply more than one role at a time, and will do so using the
normal Moose role combination system. We recommend using this function to
apply roles to an object. This is what Moose uses internally when you call
C<with>.

=head2 Handling required attributes for roles.

Application of some roles will require additional parameters being specified to
satisfy them, for example:

    {
        package Car;
        use Moose;
    }
    {
        package Breakable;
        use Moose::Role;

        has 'breakable_parts' => ( is => 'ro', required => 1 );
    }

    my $car = Car->new;

    # next line dies with: Attribute (breakable_parts) is required
    apply_all_roles( $car, 'Breakable' );

This will require passing the additional parameters at application time as
follows:

    apply_all_roles( $car, 'Breakable' => {
            rebless_params => {
                # Parameters to 'Breakable'
                breakable_parts => [qw( tires wheels windscreen )],
            }
    });

Obviously, this interface is better simplified as a method on C<Car>:

    sub make_breakable {
        my ( $self, %params ) = @_;
        apply_all_roles($self, 'Breakable', { rebless_params => \%params });
    }

    my $car = Car->new();
    $car->make_breakable( breakable_parts => [qw( tires wheels windscreen )] );

=head1 AUTHORS

=over 4

=item *

Stevan Little <stevan@cpan.org>

=item *

Dave Rolsky <autarch@urth.org>

=item *

Jesse Luehrs <doy@cpan.org>

=item *

Shawn M Moore <sartak@cpan.org>

=item *

יובל קוג'מן (Yuval Kogman) <nothingmuch@woobling.org>

=item *

Karen Etheridge <ether@cpan.org>

=item *

Florian Ragwitz <rafl@debian.org>

=item *

Hans Dieter Pearcey <hdp@cpan.org>

=item *

Chris Prather <chris@prather.org>

=item *

Matt S Trout <mstrout@cpan.org>

=back

=head1 COPYRIGHT AND LICENSE

This software is copyright (c) 2006 by Infinity Interactive, Inc.

This is free software; you can redistribute it and/or modify it under
the same terms as the Perl 5 programming language system itself.

=cut