Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
COPS-CLIENT-MIB DEFINITIONS ::= BEGIN
-- -------------------------------------------------------------
-- -------------------------------------------------------------
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
Unsigned32, mib-2
FROM SNMPv2-SMI
TimeStamp, TimeInterval, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
-- REFERENCE
-- "The COPS (Common Open Policy Service) Protocol RFC 2748
copsClientMIB MODULE-IDENTITY
LAST-UPDATED "200009280000Z"
ORGANIZATION "IETF RSVP Admission Policy Working Group"
CONTACT-INFO
" Andrew Smith (WG co-chair)
Phone: +1 408 579 2821
Email: ah_smith@pacbell.net
Mark Stevens (WG co-chair)
Phone: +1 978 287 9102
Email: markstevens@lucent.com
Editor: Andrew Smith
Phone: +1 408 579 2821
Email: ah_smith@pacbell.net
Editor: David Partain
Phone: +46 13 28 41 44
Email: David.Partain@ericsson.com
Editor: John Seligson
Phone: +1 408 495 2992
Email: jseligso@nortelnetworks.com"
DESCRIPTION
"The COPS Client MIB module"
REVISION "200009280000Z"
DESCRIPTION "This version published as RFC 2940"
::= { mib-2 89 }
copsClientMIBObjects OBJECT IDENTIFIER ::= { copsClientMIB 1 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
CopsClientState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value indicating the state of a COPS client."
SYNTAX INTEGER {
copsClientInvalid(1), -- default state.
copsClientTcpconnected(2), -- TCP connection up but COPS
-- not yet open.
copsClientAuthenticating(3), -- TCP connection up but still
-- authenticating.
copsClientSecAccepted(4), -- connection authenticated.
copsClientAccepted(5), -- COPS server accepted client.
copsClientTimingout(6) -- Keepalive timer has expired,
-- client is in process of
-- tearing down connection.
}
CopsServerEntryType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value indicating how a COPS server entry came into existence."
SYNTAX INTEGER {
copsServerStatic(1), -- configured by manager
copsServerRedirect(2) -- notified by COPS server
}
CopsErrorCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value describing a COPS protocol error. Codes are identical
to those used by the COPS protocol itself."
SYNTAX INTEGER {
errorOther(0), -- none of the below
errorBadHandle(1),
errorInvalidHandleReference(2),
errorBadMessageFormat(3),
errorUnableToProcess(4),
errorMandatoryClientSiMissing(5),
errorUnsupportedClientType(6),
errorMandatoryCopsObjectMissing(7),
errorClientFailure(8),
errorCommunicationFailure(9),
errorUnspecified(10), -- client-type specific subcode
errorShuttingDown(11),
errorRedirectToPreferredServer(12),
errorUnknownCopsObject(13),
errorAuthenticationFailure(14),
errorAuthenticationMissing(15)
}
-- REFERENCE
-- "RFC 2748 section 2.2.8"
CopsTcpPort ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value indicating a TCP protocol port number."
SYNTAX INTEGER (0..65535)
CopsAuthType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value indicating a type of security authentication mechanism."
SYNTAX INTEGER {
authNone(0),
authOther(1),
authIpSecAh(2),
authIpSecEsp(3),
authTls(4),
authCopsIntegrity(5)
}
-- -------------------------------------------------------------
copsClientCapabilitiesGroup OBJECT IDENTIFIER
::= { copsClientMIBObjects 1 }
-- -------------------------------------------------------------
--
-- Capabilities of the COPS client to connect to a COPS server:
--
copsClientCapabilities OBJECT-TYPE
SYNTAX BITS {
copsClientVersion1(0), -- supports version1 of COPS protocol
copsClientAuthIpSecAh(1) , -- supports IP-SEC Authentication
copsClientAuthIpSecEsp(2), -- supports IP-SEC Encryption
copsClientAuthTls(3), -- supports Transport-Layer Security
copsClientAuthInteg(4) -- supports COPS Integrity
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the optional capabilities that this COPS client
supports."
::= { copsClientCapabilitiesGroup 1 }
-- -------------------------------------------------------------
copsClientStatusGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 2 }
-- -------------------------------------------------------------
--
-- Current status of COPS server connections, all read-only.
--
copsClientServerCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CopsClientServerCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding COPS servers as seen from the
point of view of a COPS client. This table contains entries
for both statically-configured and dynamically-learned servers
(from a PDP Redirect operation). One entry exists in this table
for each COPS Client-Type served by the COPS server. In addition,
an entry will exist with copsClientServerClientType 0 (zero)
representing information about the underlying connection itself:
this is consistent with the COPS specification which reserves
this value for this purpose."
::= { copsClientStatusGroup 1 }
copsClientServerCurrentEntry OBJECT-TYPE
SYNTAX CopsClientServerCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of information regarding a single COPS server serving
a single COPS Client-Type from the point of view of a COPS
client."
INDEX { copsClientServerAddressType, copsClientServerAddress,
copsClientServerClientType }
::= { copsClientServerCurrentTable 1 }
CopsClientServerCurrentEntry ::=
SEQUENCE {
copsClientServerAddressType InetAddressType,
copsClientServerAddress InetAddress,
copsClientServerClientType INTEGER,
copsClientServerTcpPort CopsTcpPort,
copsClientServerType CopsServerEntryType,
copsClientServerAuthType CopsAuthType,
copsClientServerLastConnAttempt TimeStamp,
copsClientState CopsClientState,
copsClientServerKeepaliveTime TimeInterval,
copsClientServerAccountingTime TimeInterval,
copsClientInPkts Counter32,
copsClientOutPkts Counter32,
copsClientInErrs Counter32,
copsClientLastError CopsErrorCode,
copsClientTcpConnectAttempts Counter32,
copsClientTcpConnectFailures Counter32,
copsClientOpenAttempts Counter32,
copsClientOpenFailures Counter32,
copsClientErrUnsupportClienttype Counter32,
copsClientErrUnsupportedVersion Counter32,
copsClientErrLengthMismatch Counter32,
copsClientErrUnknownOpcode Counter32,
copsClientErrUnknownCnum Counter32,
copsClientErrBadCtype Counter32,
copsClientErrBadSends Counter32,
copsClientErrWrongObjects Counter32,
copsClientErrWrongOpcode Counter32,
copsClientKaTimedoutClients Counter32,
copsClientErrAuthFailures Counter32,
copsClientErrAuthMissing Counter32
}
copsClientServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of address in copsClientServerAddress."
::= { copsClientServerCurrentEntry 1 }
copsClientServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv4, IPv6 or DNS address of a COPS Server. Note that,
since this is an index to the table, the DNS name must be
short enough to fit into the maximum length of indices allowed
by the management protocol in use."
REFERENCE
"RFC 2748 section 2.3"
::= { copsClientServerCurrentEntry 2 }
copsClientServerClientType OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COPS protocol Client-Type for which this entry
applies. Multiple Client-Types can be served by a single
COPS server. The value 0 (zero) indicates that this
entry contains information about the underlying connection
itself."
REFERENCE
"RFC 2748 section 6, IANA"
::= { copsClientServerCurrentEntry 3 }
copsClientServerTcpPort OBJECT-TYPE
SYNTAX CopsTcpPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number on the COPS server to which the
client should connect/is connected."
::= { copsClientServerCurrentEntry 4 }
copsClientServerType OBJECT-TYPE
SYNTAX CopsServerEntryType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicator of the source of this COPS server information.
COPS servers may be configured by network management
into copsClientServerConfigTable and appear in this entry
with type copsServerStatic(1). Alternatively, the may be
notified from another COPS server by means of the COPS
PDP-Redirect mechanism and appear as copsServerRedirect(2)."
::= { copsClientServerCurrentEntry 5 }
copsClientServerAuthType OBJECT-TYPE
SYNTAX CopsAuthType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicator of the current security mode in use between
client and this COPS server."
::= { copsClientServerCurrentEntry 6 }
copsClientServerLastConnAttempt OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last time that this client attempted to
connect to this COPS server."
::= { copsClientServerCurrentEntry 7 }
copsClientState OBJECT-TYPE
SYNTAX CopsClientState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the connection and COPS protocol with respect
to this COPS server."
::= { copsClientServerCurrentEntry 8 }
copsClientServerKeepaliveTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the COPS protocol Keepalive timeout, in
centiseconds, currently in use by this client, as
specified by this COPS server in the Client-Accept operation.
A value of zero indicates no keepalive activity is expected."
REFERENCE
"RFC 2748 section 3.7, 4.4"
::= { copsClientServerCurrentEntry 9 }
copsClientServerAccountingTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the COPS protocol Accounting timeout, in
centiseconds, currently in use by this client, as specified
by the COPS server in the Client-Accept operation. A value
of zero indicates no accounting activity is to be performed."
REFERENCE
"RFC 2748 section 3.7"
::= { copsClientServerCurrentEntry 10 }
copsClientInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from this COPS server marked for this Client-Type.
This value is cumulative since agent restart and is not zeroed
on new connections."
::= { copsClientServerCurrentEntry 11 }
copsClientOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has sent to this COPS server marked for this Client-Type. This
value is cumulative since agent restart and is not zeroed on new
connections."
::= { copsClientServerCurrentEntry 12 }
copsClientInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from this COPS server marked for this Client-Type
that contained errors in syntax. This value is cumulative since
agent restart and is not zeroed on new connections."
::= { copsClientServerCurrentEntry 13 }
copsClientLastError OBJECT-TYPE
SYNTAX CopsErrorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The code contained in the last COPS protocol Error Object
received by this client from this COPS server marked for this
Client-Type. This value is not zeroed on COPS Client-Open
operations."
REFERENCE
"RFC 2748 section 2.2.8"
::= { copsClientServerCurrentEntry 14 }
copsClientTcpConnectAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times that this COPS client has tried
(successfully or otherwise) to open an TCP connection to a COPS
server. This value is cumulative since agent restart and is not
zeroed on new connections. This value is not incremented for
entries representing a non-zero Client-Type."
::= { copsClientServerCurrentEntry 15 }
copsClientTcpConnectFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times that this COPS client has failed
to open an TCP connection to a COPS server. This value is
cumulative since agent restart and is not zeroed on new
connections. This value is not incremented for
entries representing a non-zero Client-Type."
::= { copsClientServerCurrentEntry 16 }
copsClientOpenAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times that this COPS client has tried
to perform a COPS Client-Open to a COPS server for this
Client-Type. This value is cumulative since agent restart and is
not zeroed on new connections."
::= { copsClientServerCurrentEntry 17 }
copsClientOpenFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times that this COPS client has failed
to perform a COPS Client-Open to a COPS server for this
Client-Type. This value is cumulative since agent restart and is
not zeroed on new connections."
::= { copsClientServerCurrentEntry 18 }
copsClientErrUnsupportClienttype OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers that referred to Client-Types
that are unsupported by this client. This value is cumulative
since agent restart and is not zeroed on new connections. This
value is not incremented for entries representing a non-zero
Client-Type."
::= { copsClientServerCurrentEntry 19 }
copsClientErrUnsupportedVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
had a COPS protocol Version number that is unsupported by this
client. This value is cumulative since agent restart and is not
zeroed on new connections."
::= { copsClientServerCurrentEntry 20 }
copsClientErrLengthMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
had a COPS protocol Message Length that did not match the actual
received message. This value is cumulative since agent restart
and is not zeroed on new connections."
::= { copsClientServerCurrentEntry 21 }
copsClientErrUnknownOpcode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
had a COPS protocol Op Code that was unrecognised by this
client. This value is cumulative since agent restart and is not
zeroed on new connections."
::= { copsClientServerCurrentEntry 22 }
copsClientErrUnknownCnum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
contained a COPS protocol object C-Num that was unrecognised by
this client. This value is cumulative since agent restart and is
not zeroed on new connections."
::= { copsClientServerCurrentEntry 23 }
copsClientErrBadCtype OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
contained a COPS protocol object C-Type that was not defined for
the C-Nums known by this client. This value is cumulative since
agent restart and is not zeroed on new connections."
::= { copsClientServerCurrentEntry 24 }
copsClientErrBadSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
attempted to send to COPS servers marked for this Client-Type
that resulted in a transmit error. This value is cumulative
since agent restart and is not zeroed on new connections."
::= { copsClientServerCurrentEntry 25 }
copsClientErrWrongObjects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
did not contain a permitted set of COPS protocol objects. This
value is cumulative since agent restart and is not zeroed on new
connections."
::= { copsClientServerCurrentEntry 26 }
copsClientErrWrongOpcode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of COPS messages that this client
has received from COPS servers marked for this Client-Type that
had a COPS protocol Op Code that should not have been sent to a
COPS client e.g. Open-Requests. This value is cumulative since
agent restart and is not zeroed on new connections."
::= { copsClientServerCurrentEntry 27 }
copsClientKaTimedoutClients OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of times that this client has
been shut down for this Client-Type by COPS servers that had
detected a COPS protocol Keepalive timeout. This value is
cumulative since agent restart and is not zeroed on new
connections."
::= { copsClientServerCurrentEntry 28 }
copsClientErrAuthFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of times that this client has
received a COPS message marked for this Client-Type which
could not be authenticated using the authentication mechanism
used by this client."
::= { copsClientServerCurrentEntry 29 }
copsClientErrAuthMissing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of times that this client has
received a COPS message marked for this Client-Type which did not
contain authentication information."
::= { copsClientServerCurrentEntry 30 }
-- -------------------------------------------------------------
copsClientConfigGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 3 }
-- -------------------------------------------------------------
copsClientServerConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CopsClientServerConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of possible COPS servers to try to connect to in order
of copsClientServerConfigPriority. There may be multiple
entries in this table for the same server and client-type which
specify different security mechanisms: these mechanisms will
be attempted by the client in the priority order given. Note
that a server learned by means of PDPRedirect always takes
priority over any of these configured entries."
::= { copsClientConfigGroup 1 }
copsClientServerConfigEntry OBJECT-TYPE
SYNTAX CopsClientServerConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of configuration information regarding a single
COPS server from the point of view of a COPS client."
INDEX { copsClientServerConfigAddrType,
copsClientServerConfigAddress,
copsClientServerConfigClientType,
copsClientServerConfigAuthType }
::= { copsClientServerConfigTable 1 }
CopsClientServerConfigEntry ::=
SEQUENCE {
copsClientServerConfigAddrType InetAddressType,
copsClientServerConfigAddress InetAddress,
copsClientServerConfigClientType INTEGER,
copsClientServerConfigAuthType CopsAuthType,
copsClientServerConfigTcpPort CopsTcpPort,
copsClientServerConfigPriority Integer32,
copsClientServerConfigRowStatus RowStatus
}
copsClientServerConfigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of address in copsClientServerConfigAddress."
::= { copsClientServerConfigEntry 1 }
copsClientServerConfigAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv4, IPv6 or DNS address of a COPS Server. Note that,
since this is an index to the table, the DNS name must be
short enough to fit into the maximum length of indices allowed
by the management protocol in use."
REFERENCE
"RFC 2748 section 2.3"
::= { copsClientServerConfigEntry 2 }
copsClientServerConfigClientType OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COPS protocol Client-Type for which this entry
applies and for which this COPS server is capable
of serving. Multiple Client-Types can be served by a
single COPS server."
REFERENCE
"RFC 2748 section 6, IANA"
::= { copsClientServerConfigEntry 3 }
copsClientServerConfigAuthType OBJECT-TYPE
SYNTAX CopsAuthType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of authentication mechanism for this COPS client
to request when negotiating security at the start of a
connection to a COPS server."
REFERENCE
"RFC 2748 section 4."
::= { copsClientServerConfigEntry 4 }
copsClientServerConfigTcpPort OBJECT-TYPE
SYNTAX CopsTcpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TCP port number on the COPS server to which the
client should connect."
::= { copsClientServerConfigEntry 5 }
copsClientServerConfigPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this entry relative to other entries.
COPS client will attempt to contact COPS servers for the
appropriate Client-Type. Higher numbers are tried first. The
order to be used amongst server entries with the same priority
is undefined. COPS servers that are notified to the client using
the COPS protocol PDP-Redirect mechanism are always used in
preference to any entries in this table."
::= { copsClientServerConfigEntry 6 }
copsClientServerConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of this entry in the table."
::= { copsClientServerConfigEntry 7 }
copsClientServerConfigRetryAlgrm OBJECT-TYPE
SYNTAX INTEGER {
other(1),
sequential(2),
roundRobin(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The algorithm by which the client should retry when it
fails to connect to a COPS server."
DEFVAL { sequential }
::= { copsClientConfigGroup 2 }
copsClientServerConfigRetryCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A retry count for use by the retry algorithm. Each retry
algorithm needs to specify how it uses this value.
For the 'sequential(2)' algorithm, this value is the
number of times the client should retry to connect
to one COPS server before moving on to another.
For the 'roundRobin(3)' algorithm, this value is not used."
DEFVAL { 1 }
::= { copsClientConfigGroup 3 }
copsClientServerConfigRetryIntvl OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A retry interval for use by the retry algorithm. Each retry
algorithm needs to specify how it uses this value.
For the 'sequential(2)' algorithm, this value is the time to
wait between retries of a connection to the same COPS server.
For the 'roundRobin(3)' algorithm, the client always attempts
to connect to each Server in turn, until one succeeds or they
all fail; if they all fail, then the client waits for the value
of this interval before restarting the algorithm."
DEFVAL { 1000 }
::= { copsClientConfigGroup 4 }
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------
copsClientConformance OBJECT IDENTIFIER ::= { copsClientMIB 2 }
copsClientGroups OBJECT IDENTIFIER ::= { copsClientConformance 1 }
copsClientCompliances OBJECT IDENTIFIER ::= { copsClientConformance 2 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
copsDeviceStatusGroup OBJECT-GROUP
OBJECTS {
copsClientCapabilities,
copsClientServerTcpPort, copsClientServerType,
copsClientServerAuthType, copsClientServerLastConnAttempt,
copsClientState, copsClientServerKeepaliveTime,
copsClientServerAccountingTime, copsClientInPkts,
copsClientOutPkts, copsClientInErrs, copsClientLastError,
copsClientTcpConnectAttempts, copsClientTcpConnectFailures,
copsClientOpenAttempts, copsClientOpenFailures,
copsClientErrUnsupportClienttype,
copsClientErrUnsupportedVersion, copsClientErrLengthMismatch,
copsClientErrUnknownOpcode, copsClientErrUnknownCnum,
copsClientErrBadCtype, copsClientErrBadSends,
copsClientErrWrongObjects, copsClientErrWrongOpcode,
copsClientKaTimedoutClients, copsClientErrAuthFailures,
copsClientErrAuthMissing
}
STATUS current
DESCRIPTION
"A collection of objects for monitoring the status of
connections to COPS servers and statistics for a COPS client."
::= { copsClientGroups 1 }
copsDeviceConfigGroup OBJECT-GROUP
OBJECTS {
copsClientServerConfigTcpPort, copsClientServerConfigPriority,
copsClientServerConfigRowStatus,
copsClientServerConfigRetryAlgrm,
copsClientServerConfigRetryCount,
copsClientServerConfigRetryIntvl
}
STATUS current
DESCRIPTION
"A collection of objects for configuring COPS server
information."
::= { copsClientGroups 2 }
-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------
copsClientCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of
management of the COPS client."
MODULE
MANDATORY-GROUPS {
copsDeviceStatusGroup, copsDeviceConfigGroup
}
OBJECT copsClientServerConfigTcpPort
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the device supports the
configuration of COPS server information."
OBJECT copsClientServerConfigPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the device supports the
configuration of COPS server information."
OBJECT copsClientServerConfigRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the device supports the
configuration of COPS server information."
OBJECT copsClientServerConfigRetryAlgrm
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the device supports the
configuration of COPS server information."
OBJECT copsClientServerConfigRetryCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the device supports the
configuration of COPS server information."
OBJECT copsClientServerConfigRetryIntvl
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the device supports the
configuration of COPS server information."
::= { copsClientCompliances 1 }
END