Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
DIFFSERV-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, Counter64, MODULE-IDENTITY, OBJECT-TYPE,
OBJECT-IDENTITY, zeroDotZero, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, RowPointer,
StorageType, AutonomousType
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength,
InetPortNumber
FROM INET-ADDRESS-MIB
BurstSize
FROM INTEGRATED-SERVICES-MIB
Dscp, DscpOrAny
FROM DIFFSERV-DSCP-TC;
diffServMib MODULE-IDENTITY
LAST-UPDATED "200202070000Z"
ORGANIZATION "IETF Differentiated Services WG"
CONTACT-INFO
" Fred Baker
Cisco Systems
1121 Via Del Rey
Santa Barbara, CA 93117, USA
E-mail: fred@cisco.com
Kwok Ho Chan
Nortel Networks
600 Technology Park Drive
Billerica, MA 01821, USA
E-mail: khchan@nortelnetworks.com
Andrew Smith
Harbour Networks
Jiuling Building
21 North Xisanhuan Ave.
Beijing, 100089, PRC
E-mail: ah_smith@acm.org
Differentiated Services Working Group:
diffserv@ietf.org"
DESCRIPTION
"This MIB defines the objects necessary to manage a device that
uses the Differentiated Services Architecture described in RFC
2475. The Conceptual Model of a Differentiated Services Router
provides supporting information on how such a router is modeled."
REVISION "200202070000Z"
DESCRIPTION
"Initial version, published as RFC 3289."
::= { mib-2 97 }
diffServMIBObjects OBJECT IDENTIFIER ::= { diffServMib 1 }
diffServMIBConformance OBJECT IDENTIFIER ::= { diffServMib 2 }
diffServMIBAdmin OBJECT IDENTIFIER ::= { diffServMib 3 }
IndexInteger ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An integer which may be used as a table index."
SYNTAX Unsigned32 (1..4294967295)
IndexIntegerNextFree ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An integer which may be used as a new Index in a table.
The special value of 0 indicates that no more new entries can be
created in the relevant table.
When a MIB is used for configuration, an object with this SYNTAX
always contains a legal value (if non-zero) for an index that is
not currently used in the relevant table. The Command Generator
(Network Management Application) reads this variable and uses the
(non-zero) value read when creating a new row with an SNMP SET.
When the SET is performed, the Command Responder (agent) must
determine whether the value is indeed still unused; Two Network
Management Applications may attempt to create a row
(configuration entry) simultaneously and use the same value. If
it is currently unused, the SET succeeds and the Command
Responder (agent) changes the value of this object, according to
an implementation-specific algorithm. If the value is in use,
however, the SET fails. The Network Management Application must
then re-read this variable to obtain a new usable value.
An OBJECT-TYPE definition using this SYNTAX MUST specify the
relevant table for which the object is providing this
functionality."
SYNTAX Unsigned32 (0..4294967295)
IfDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IfDirection specifies a direction of data travel on an
interface. 'inbound' traffic is operated on during reception from
the interface, while 'outbound' traffic is operated on prior to
transmission on the interface."
SYNTAX INTEGER {
inbound(1), -- ingress interface
outbound(2) -- egress interface
}
--
-- Data Path
--
diffServDataPath OBJECT IDENTIFIER ::= { diffServMIBObjects 1 }
--
-- Data Path Table
--
-- The Data Path Table enumerates the Differentiated Services
-- Functional Data Paths within this device. Each entry in this table
-- is indexed by ifIndex and ifDirection. Each entry provides the
-- first Differentiated Services Functional Data Path Element to
-- process data flowing along specific data path. This table should
-- have at most two entries for each interface capable of
-- Differentiated Services processing on this device: ingress and
-- egress.
-- Note that Differentiated Services Functional Data Path Elements
-- linked together using their individual next pointers and anchored by
-- an entry of the diffServDataPathTable constitute a functional data
-- path.
--
diffServDataPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServDataPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The data path table contains RowPointers indicating the start of
the functional data path for each interface and traffic direction
in this device. These may merge, or be separated into parallel
data paths."
::= { diffServDataPath 1 }
diffServDataPathEntry OBJECT-TYPE
SYNTAX DiffServDataPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the data path table indicates the start of a single
Differentiated Services Functional Data Path in this device.
These are associated with individual interfaces, logical or
physical, and therefore are instantiated by ifIndex. Therefore,
the interface index must have been assigned, according to the
procedures applicable to that, before it can be meaningfully
used. Generally, this means that the interface must exist.
When diffServDataPathStorage is of type nonVolatile, however,
this may reflect the configuration for an interface whose ifIndex
has been assigned but for which the supporting implementation is
not currently present."
INDEX { ifIndex, diffServDataPathIfDirection }
::= { diffServDataPathTable 1 }
DiffServDataPathEntry ::= SEQUENCE {
diffServDataPathIfDirection IfDirection,
diffServDataPathStart RowPointer,
diffServDataPathStorage StorageType,
diffServDataPathStatus RowStatus
}
diffServDataPathIfDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfDirection specifies whether the reception or transmission path
for this interface is in view."
::= { diffServDataPathEntry 1 }
diffServDataPathStart OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This selects the first Differentiated Services Functional Data
Path Element to handle traffic for this data path. This
RowPointer should point to an instance of one of:
diffServClfrEntry
diffServMeterEntry
diffServActionEntry
diffServAlgDropEntry
diffServQEntry
A value of zeroDotZero in this attribute indicates that no
Differentiated Services treatment is performed on traffic of this
data path. A pointer with the value zeroDotZero normally
terminates a functional data path.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServDataPathEntry 2 }
diffServDataPathStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServDataPathEntry 3 }
diffServDataPathStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time."
::= { diffServDataPathEntry 4 }
--
-- Classifiers
--
diffServClassifier OBJECT IDENTIFIER ::= { diffServMIBObjects 2 }
--
-- Classifier Table
--
-- The Classifier Table allows multiple classifier elements, of same or
-- different types, to be used together. A classifier must completely
-- classify all packets presented to it. This means that all traffic
-- presented to a classifier must match at least one classifier element
-- within the classifier, with the classifier element parameters
-- specified by a filter.
-- If there is ambiguity between classifier elements of different
-- classifier, classifier linkage order indicates their precedence; the
-- first classifier in the link is applied to the traffic first.
-- Entries in the classifier element table serves as the anchor for
-- each classification pattern, defined in filter table entries. Each
-- classifier element table entry also specifies the subsequent
-- downstream Differentiated Services Functional Data Path Element when
-- the classification pattern is satisfied. Each entry in the
-- classifier element table describes one branch of the fan-out
-- characteristic of a classifier indicated in the Informal
-- Differentiated Services Model section 4.1. A classifier is composed
-- of one or more classifier elements.
diffServClfrNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServClfrId, or a
zero to indicate that none exist."
::= { diffServClassifier 1 }
diffServClfrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates all the diffserv classifier functional
data path elements of this device. The actual classification
definitions are defined in diffServClfrElementTable entries
belonging to each classifier.
An entry in this table, pointed to by a RowPointer specifying an
instance of diffServClfrStatus, is frequently used as the name
for a set of classifier elements, which all use the index
diffServClfrId. Per the semantics of the classifier element
table, these entries constitute one or more unordered sets of
tests which may be simultaneously applied to a message to
classify it.
The primary function of this table is to ensure that the value of
diffServClfrId is unique before attempting to use it in creating
a diffServClfrElementEntry. Therefore, the diffServClfrEntry must
be created on the same SET as the diffServClfrElementEntry, or
before the diffServClfrElementEntry is created."
::= { diffServClassifier 2 }
diffServClfrEntry OBJECT-TYPE
SYNTAX DiffServClfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the classifier table describes a single classifier.
All classifier elements belonging to the same classifier use the
classifier's diffServClfrId as part of their index."
INDEX { diffServClfrId }
::= { diffServClfrTable 1 }
DiffServClfrEntry ::= SEQUENCE {
diffServClfrId IndexInteger,
diffServClfrStorage StorageType,
diffServClfrStatus RowStatus
}
diffServClfrId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the classifier entries. Managers
should obtain new values for row creation in this table by
reading diffServClfrNextFree."
::= { diffServClfrEntry 1 }
diffServClfrStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServClfrEntry 2 }
diffServClfrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServClfrEntry 3 }
--
-- Classifier Element Table
--
diffServClfrElementNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServClfrElementId,
or a zero to indicate that none exist."
::= { diffServClassifier 3 }
diffServClfrElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClfrElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The classifier element table enumerates the relationship between
classification patterns and subsequent downstream Differentiated
Services Functional Data Path elements.
diffServClfrElementSpecific points to a filter that specifies the
classification parameters. A classifier may use filter tables of
different types together.
One example of a filter table defined in this MIB is
diffServMultiFieldClfrTable, for IP Multi-Field Classifiers
(MFCs). Such an entry might identify anything from a single
micro-flow (an identifiable sub-session packet stream directed
from one sending transport to the receiving transport or
transports), or aggregates of those such as the traffic from a
host, traffic for an application, or traffic between two hosts
using an application and a given DSCP. The standard Behavior
Aggregate used in the Differentiated Services Architecture is
encoded as a degenerate case of such an aggregate - the traffic
using a particular DSCP value.
Filter tables for other filter types may be defined elsewhere."
::= { diffServClassifier 4 }
diffServClfrElementEntry OBJECT-TYPE
SYNTAX DiffServClfrElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the classifier element table describes a single
element of the classifier."
INDEX { diffServClfrId, diffServClfrElementId }
::= { diffServClfrElementTable 1 }
DiffServClfrElementEntry ::= SEQUENCE {
diffServClfrElementId IndexInteger,
diffServClfrElementPrecedence Unsigned32,
diffServClfrElementNext RowPointer,
diffServClfrElementSpecific RowPointer,
diffServClfrElementStorage StorageType,
diffServClfrElementStatus RowStatus
}
diffServClfrElementId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Classifier Element entries.
Managers obtain new values for row creation in this table by
reading diffServClfrElementNextFree."
::= { diffServClfrElementEntry 1 }
diffServClfrElementPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The relative order in which classifier elements are applied:
higher numbers represent classifier element with higher
precedence. Classifier elements with the same order must be
unambiguous i.e. they must define non-overlapping patterns, and
are considered to be applied simultaneously to the traffic
stream. Classifier elements with different order may overlap in
their filters: the classifier element with the highest order
that matches is taken.
On a given interface, there must be a complete classifier in
place at all times in the ingress direction. This means one or
more filters must match any possible pattern. There is no such
requirement in the egress direction."
::= { diffServClfrElementEntry 2 }
diffServClfrElementNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute provides one branch of the fan-out functionality
of a classifier described in the Informal Differentiated Services
Model section 4.1.
This selects the next Differentiated Services Functional Data
Path Element to handle traffic for this data path. This
RowPointer should point to an instance of one of:
diffServClfrEntry
diffServMeterEntry
diffServActionEntry
diffServAlgDropEntry
diffServQEntry
A value of zeroDotZero in this attribute indicates no further
Differentiated Services treatment is performed on traffic of this
data path. The use of zeroDotZero is the normal usage for the
last functional data path element of the current data path.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServClfrElementEntry 3 }
diffServClfrElementSpecific OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A pointer to a valid entry in another table, filter table, that
describes the applicable classification parameters, e.g. an entry
in diffServMultiFieldClfrTable.
The value zeroDotZero is interpreted to match anything not
matched by another classifier element - only one such entry may
exist for each classifier.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the element is ignored."
::= { diffServClfrElementEntry 4 }
diffServClfrElementStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServClfrElementEntry 5 }
diffServClfrElementStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServClfrElementEntry 6 }
--
-- IP Multi-field Classification Table
--
-- Classification based on six different fields in the IP header.
-- Functional Data Paths may share definitions by using the same entry.
--
diffServMultiFieldClfrNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for
diffServMultiFieldClfrId, or a zero to indicate that none exist."
::= { diffServClassifier 5 }
diffServMultiFieldClfrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMultiFieldClfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Multi-field Classifier filter entries that a
system may use to identify IP traffic."
::= { diffServClassifier 6 }
diffServMultiFieldClfrEntry OBJECT-TYPE
SYNTAX DiffServMultiFieldClfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP Multi-field Classifier entry describes a single filter."
INDEX { diffServMultiFieldClfrId }
::= { diffServMultiFieldClfrTable 1 }
DiffServMultiFieldClfrEntry ::= SEQUENCE {
diffServMultiFieldClfrId IndexInteger,
diffServMultiFieldClfrAddrType InetAddressType,
diffServMultiFieldClfrDstAddr InetAddress,
diffServMultiFieldClfrDstPrefixLength InetAddressPrefixLength,
diffServMultiFieldClfrSrcAddr InetAddress,
diffServMultiFieldClfrSrcPrefixLength InetAddressPrefixLength,
diffServMultiFieldClfrDscp DscpOrAny,
diffServMultiFieldClfrFlowId Unsigned32,
diffServMultiFieldClfrProtocol Unsigned32,
diffServMultiFieldClfrDstL4PortMin InetPortNumber,
diffServMultiFieldClfrDstL4PortMax InetPortNumber,
diffServMultiFieldClfrSrcL4PortMin InetPortNumber,
diffServMultiFieldClfrSrcL4PortMax InetPortNumber,
diffServMultiFieldClfrStorage StorageType,
diffServMultiFieldClfrStatus RowStatus
}
diffServMultiFieldClfrId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the MultiField Classifier filter
entries. Managers obtain new values for row creation in this
table by reading diffServMultiFieldClfrNextFree."
::= { diffServMultiFieldClfrEntry 1 }
diffServMultiFieldClfrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP address used by this classifier entry. While
other types of addresses are defined in the InetAddressType
textual convention, and DNS names, a classifier can only look at
packets on the wire. Therefore, this object is limited to IPv4
and IPv6 addresses."
::= { diffServMultiFieldClfrEntry 2 }
diffServMultiFieldClfrDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's destination IP
address. This may not be a DNS name, but may be an IPv4 or IPv6
prefix. diffServMultiFieldClfrDstPrefixLength indicates the
number of bits that are relevant."
::= { diffServMultiFieldClfrEntry 3 }
diffServMultiFieldClfrDstPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0
indicates a match of any address; a length of 32 indicates a
match of a single host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is similar, except that
prefix lengths range from 0..128."
DEFVAL { 0 }
::= { diffServMultiFieldClfrEntry 4 }
diffServMultiFieldClfrSrcAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's source IP address.
This may not be a DNS name, but may be an IPv4 or IPv6 prefix.
diffServMultiFieldClfrSrcPrefixLength indicates the number of
bits that are relevant."
::= { diffServMultiFieldClfrEntry 5 }
diffServMultiFieldClfrSrcPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0
indicates a match of any address; a length of 32 indicates a
match of a single host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is similar, except that
prefix lengths range from 0..128."
DEFVAL { 0 }
::= { diffServMultiFieldClfrEntry 6 }
diffServMultiFieldClfrDscp OBJECT-TYPE
SYNTAX DscpOrAny
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value that the DSCP in the packet must have to match this
entry. A value of -1 indicates that a specific DSCP value has not
been defined and thus all DSCP values are considered a match."
DEFVAL { -1 }
::= { diffServMultiFieldClfrEntry 7 }
diffServMultiFieldClfrFlowId OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flow identifier in an IPv6 header."
::= { diffServMultiFieldClfrEntry 8 }
diffServMultiFieldClfrProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP protocol to match against the IPv4 protocol number or the
IPv6 Next- Header number in the packet. A value of 255 means
match all. Note the protocol number of 255 is reserved by IANA,
and Next-Header number of 0 is used in IPv6."
DEFVAL { 255 }
::= { diffServMultiFieldClfrEntry 9 }
diffServMultiFieldClfrDstL4PortMin OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the layer-4 destination port number in
the packet must have in order to match this classifier entry."
DEFVAL { 0 }
::= { diffServMultiFieldClfrEntry 10 }
diffServMultiFieldClfrDstL4PortMax OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the layer-4 destination port number in
the packet must have in order to match this classifier entry.
This value must be equal to or greater than the value specified
for this entry in diffServMultiFieldClfrDstL4PortMin."
DEFVAL { 65535 }
::= { diffServMultiFieldClfrEntry 11 }
diffServMultiFieldClfrSrcL4PortMin OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the layer-4 source port number in the
packet must have in order to match this classifier entry."
DEFVAL { 0 }
::= { diffServMultiFieldClfrEntry 12 }
diffServMultiFieldClfrSrcL4PortMax OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the layer-4 source port number in the
packet must have in order to match this classifier entry. This
value must be equal to or greater than the value specified for
this entry in diffServMultiFieldClfrSrcL4PortMin."
DEFVAL { 65535 }
::= { diffServMultiFieldClfrEntry 13 }
diffServMultiFieldClfrStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServMultiFieldClfrEntry 14 }
diffServMultiFieldClfrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServMultiFieldClfrEntry 15 }
--
-- Meters
--
diffServMeter OBJECT IDENTIFIER ::= { diffServMIBObjects 3 }
--
-- This MIB supports a variety of Meters. It includes a specific
-- definition for Token Bucket Meter, which are but one type of
-- specification. Other metering parameter sets can be defined in other
-- MIBs.
-- Multiple meter elements may be logically cascaded using their
-- diffServMeterSucceedNext and diffServMeterFailNext pointers if
-- required. One example of this might be for an AF PHB implementation
-- that uses multiple level conformance meters.
-- Cascading of individual meter elements in the MIB is intended to be
-- functionally equivalent to multiple level conformance determination
-- of a packet. The sequential nature of the representation is merely
-- a notational convenience for this MIB.
-- srTCM meters (RFC 2697) can be specified using two sets of
-- diffServMeterEntry and diffServTBParamEntry. The first set specifies
-- the Committed Information Rate and Committed Burst Size
-- token-bucket. The second set specifies the Excess Burst Size
-- token-bucket.
-- trTCM meters (RFC 2698) can be specified using two sets of
-- diffServMeterEntry and diffServTBParamEntry. The first set specifies
-- the Committed Information Rate and Committed Burst Size
-- token-bucket. The second set specifies the Peak Information Rate
-- and Peak Burst Size token-bucket.
-- tswTCM meters (RFC 2859) can be specified using two sets of
-- diffServMeterEntry and diffServTBParamEntry. The first set specifies
-- the Committed Target Rate token-bucket. The second set specifies
-- the Peak Target Rate token-bucket. diffServTBParamInterval in each
-- token bucket reflects the Average Interval.
--
diffServMeterNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServMeterId, or a
zero to indicate that none exist."
::= { diffServMeter 1 }
diffServMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates specific meters that a system may use to
police a stream of traffic. The traffic stream to be metered is
determined by the Differentiated Services Functional Data Path
Element(s) upstream of the meter i.e. by the object(s) that point
to each entry in this table. This may include all traffic on an
interface.
Specific meter details are to be found in table entry referenced
by diffServMeterSpecific."
::= { diffServMeter 2 }
diffServMeterEntry OBJECT-TYPE
SYNTAX DiffServMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the meter table describes a single conformance level
of a meter."
INDEX { diffServMeterId }
::= { diffServMeterTable 1 }
DiffServMeterEntry ::= SEQUENCE {
diffServMeterId IndexInteger,
diffServMeterSucceedNext RowPointer,
diffServMeterFailNext RowPointer,
diffServMeterSpecific RowPointer,
diffServMeterStorage StorageType,
diffServMeterStatus RowStatus
}
diffServMeterId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Meter entries. Managers obtain new
values for row creation in this table by reading
diffServMeterNextFree."
::= { diffServMeterEntry 1 }
diffServMeterSucceedNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the traffic does conform, this selects the next
Differentiated Services Functional Data Path element to handle
traffic for this data path. This RowPointer should point to an
instance of one of:
diffServClfrEntry
diffServMeterEntry
diffServActionEntry
diffServAlgDropEntry
diffServQEntry
A value of zeroDotZero in this attribute indicates that no
further Differentiated Services treatment is performed on traffic
of this data path. The use of zeroDotZero is the normal usage for
the last functional data path element of the current data path.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
DEFVAL { zeroDotZero }
::= { diffServMeterEntry 2 }
diffServMeterFailNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the traffic does not conform, this selects the next
Differentiated Services Functional Data Path element to handle
traffic for this data path. This RowPointer should point to an
instance of one of:
diffServClfrEntry
diffServMeterEntry
diffServActionEntry
diffServAlgDropEntry
diffServQEntry
A value of zeroDotZero in this attribute indicates no further
Differentiated Services treatment is performed on traffic of this
data path. The use of zeroDotZero is the normal usage for the
last functional data path element of the current data path.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
DEFVAL { zeroDotZero }
::= { diffServMeterEntry 3 }
diffServMeterSpecific OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the behavior of the meter by pointing to an entry
containing detailed parameters. Note that entries in that
specific table must be managed explicitly.
For example, diffServMeterSpecific may point to an entry in
diffServTBParamTable, which contains an instance of a single set
of Token Bucket parameters.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the meter always succeeds."
::= { diffServMeterEntry 4 }
diffServMeterStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServMeterEntry 5 }
diffServMeterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServMeterEntry 6 }
--
-- Token Bucket Parameter Table
--
diffServTBParam OBJECT IDENTIFIER ::= { diffServMIBObjects 4 }
-- Each entry in the Token Bucket Parameter Table parameterize a single
-- token bucket. Multiple token buckets can be used together to
-- parameterize multiple levels of conformance.
-- Note that an entry in the Token Bucket Parameter Table can be shared
-- by multiple diffServMeterTable entries.
--
diffServTBParamNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServTBParamId, or a
zero to indicate that none exist."
::= { diffServTBParam 1 }
diffServTBParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServTBParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates a single set of token bucket meter
parameters that a system may use to police a stream of traffic.
Such meters are modeled here as having a single rate and a single
burst size. Multiple entries are used when multiple rates/burst
sizes are needed."
::= { diffServTBParam 2 }
diffServTBParamEntry OBJECT-TYPE
SYNTAX DiffServTBParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry that describes a single set of token bucket
parameters."
INDEX { diffServTBParamId }
::= { diffServTBParamTable 1 }
DiffServTBParamEntry ::= SEQUENCE {
diffServTBParamId IndexInteger,
diffServTBParamType AutonomousType,
diffServTBParamRate Unsigned32,
diffServTBParamBurstSize BurstSize,
diffServTBParamInterval Unsigned32,
diffServTBParamStorage StorageType,
diffServTBParamStatus RowStatus
}
diffServTBParamId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Token Bucket Parameter entries.
Managers obtain new values for row creation in this table by
reading diffServTBParamNextFree."
::= { diffServTBParamEntry 1 }
diffServTBParamType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Metering algorithm associated with the Token Bucket
parameters. zeroDotZero indicates this is unknown.
Standard values for generic algorithms:
diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate,
diffServTBParamSrTCMBlind, diffServTBParamSrTCMAware,
diffServTBParamTrTCMBlind, diffServTBParamTrTCMAware, and
diffServTBParamTswTCM are specified in this MIB as OBJECT-
IDENTITYs; additional values may be further specified in other
MIBs."
::= { diffServTBParamEntry 2 }
diffServTBParamRate OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The token-bucket rate, in kilobits per second (kbps). This
attribute is used for:
1. CIR in RFC 2697 for srTCM
2. CIR and PIR in RFC 2698 for trTCM
3. CTR and PTR in RFC 2859 for TSWTCM
4. AverageRate in RFC 3290."
::= { diffServTBParamEntry 3 }
diffServTBParamBurstSize OBJECT-TYPE
SYNTAX BurstSize
UNITS "Bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of bytes in a single transmission burst. This
attribute is used for:
1. CBS and EBS in RFC 2697 for srTCM
2. CBS and PBS in RFC 2698 for trTCM
3. Burst Size in RFC 3290."
::= { diffServTBParamEntry 4 }
diffServTBParamInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval used with the token bucket. For:
1. Average Rate Meter, the Informal Differentiated Services Model
section 5.2.1, - Delta.
2. Simple Token Bucket Meter, the Informal Differentiated
Services Model section 5.1, - time interval t.
3. RFC 2859 TSWTCM, - AVG_INTERVAL.
4. RFC 2697 srTCM, RFC 2698 trTCM, - token bucket update time
interval."
::= { diffServTBParamEntry 5 }
diffServTBParamStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServTBParamEntry 6 }
diffServTBParamStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServTBParamEntry 7 }
--
-- OIDs for diffServTBParamType definitions.
--
diffServTBMeters OBJECT IDENTIFIER ::= { diffServMIBAdmin 1 }
diffServTBParamSimpleTokenBucket OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Two Parameter Token Bucket Meter as described in the Informal
Differentiated Services Model section 5.2.3."
::= { diffServTBMeters 1 }
diffServTBParamAvgRate OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Average Rate Meter as described in the Informal Differentiated
Services Model section 5.2.1."
::= { diffServTBMeters 2 }
diffServTBParamSrTCMBlind OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Single Rate Three Color Marker Metering as defined by RFC 2697,
in the `Color Blind' mode as described by the RFC."
REFERENCE
"RFC 2697"
::= { diffServTBMeters 3 }
diffServTBParamSrTCMAware OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Single Rate Three Color Marker Metering as defined by RFC 2697,
in the `Color Aware' mode as described by the RFC."
REFERENCE
"RFC 2697"
::= { diffServTBMeters 4 }
diffServTBParamTrTCMBlind OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Two Rate Three Color Marker Metering as defined by RFC 2698, in
the `Color Blind' mode as described by the RFC."
REFERENCE
"RFC 2698"
::= { diffServTBMeters 5 }
diffServTBParamTrTCMAware OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Two Rate Three Color Marker Metering as defined by RFC 2698, in
the `Color Aware' mode as described by the RFC."
REFERENCE
"RFC 2698"
::= { diffServTBMeters 6 }
diffServTBParamTswTCM OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Time Sliding Window Three Color Marker Metering as defined by
RFC 2859."
REFERENCE
"RFC 2859"
::= { diffServTBMeters 7 }
--
-- Actions
--
diffServAction OBJECT IDENTIFIER ::= { diffServMIBObjects 5 }
--
-- The Action Table allows enumeration of the different types of
-- actions to be applied to a traffic flow.
--
diffServActionNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServActionId, or a
zero to indicate that none exist."
::= { diffServAction 1 }
diffServActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Action Table enumerates actions that can be performed to a
stream of traffic. Multiple actions can be concatenated. For
example, traffic exiting from a meter may be counted, marked, and
potentially dropped before entering a queue.
Specific actions are indicated by diffServActionSpecific which
points to an entry of a specific action type parameterizing the
action in detail."
::= { diffServAction 2 }
diffServActionEntry OBJECT-TYPE
SYNTAX DiffServActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the action table allows description of one
specific action to be applied to traffic."
INDEX { diffServActionId }
::= { diffServActionTable 1 }
DiffServActionEntry ::= SEQUENCE {
diffServActionId IndexInteger,
diffServActionInterface InterfaceIndexOrZero,
diffServActionNext RowPointer,
diffServActionSpecific RowPointer,
diffServActionStorage StorageType,
diffServActionStatus RowStatus
}
diffServActionId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Action entries. Managers obtain
new values for row creation in this table by reading
diffServActionNextFree."
::= { diffServActionEntry 1 }
diffServActionInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface index (value of ifIndex) that this action occurs
on. This may be derived from the diffServDataPathStartEntry's
index by extension through the various RowPointers. However, as
this may be difficult for a network management station, it is
placed here as well. If this is indeterminate, the value is
zero.
This is of especial relevance when reporting the counters which
may apply to traffic crossing an interface:
diffServCountActOctets,
diffServCountActPkts,
diffServAlgDropOctets,
diffServAlgDropPkts,
diffServAlgRandomDropOctets, and
diffServAlgRandomDropPkts.
It is also especially relevant to the queue and scheduler which
may be subsequently applied."
::= { diffServActionEntry 2 }
diffServActionNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This selects the next Differentiated Services Functional Data
Path Element to handle traffic for this data path. This
RowPointer should point to an instance of one of:
diffServClfrEntry
diffServMeterEntry
diffServActionEntry
diffServAlgDropEntry
diffServQEntry
A value of zeroDotZero in this attribute indicates no further
Differentiated Services treatment is performed on traffic of this
data path. The use of zeroDotZero is the normal usage for the
last functional data path element of the current data path.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
DEFVAL { zeroDotZero }
::= { diffServActionEntry 3 }
diffServActionSpecific OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A pointer to an object instance providing additional information
for the type of action indicated by this action table entry.
For the standard actions defined by this MIB module, this should
point to either a diffServDscpMarkActEntry or a
diffServCountActEntry. For other actions, it may point to an
object instance defined in some other MIB.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the Meter should be treated as
if it were not present. This may lead to incorrect policy
behavior."
::= { diffServActionEntry 4 }
diffServActionStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServActionEntry 5 }
diffServActionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServActionEntry 6 }
-- DSCP Mark Action Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the DSCP Mark action.
--
-- A single entry in this table can be shared by multiple
-- diffServActionTable entries.
--
diffServDscpMarkActTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServDscpMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates specific DSCPs used for marking or
remarking the DSCP field of IP packets. The entries of this table
may be referenced by a diffServActionSpecific attribute."
::= { diffServAction 3 }
diffServDscpMarkActEntry OBJECT-TYPE
SYNTAX DiffServDscpMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSCP mark action table that describes a single
DSCP used for marking."
INDEX { diffServDscpMarkActDscp }
::= { diffServDscpMarkActTable 1 }
DiffServDscpMarkActEntry ::= SEQUENCE {
diffServDscpMarkActDscp Dscp
}
diffServDscpMarkActDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP that this Action will store into the DSCP field of the
subject. It is quite possible that the only packets subject to
this Action are already marked with this DSCP. Note also that
Differentiated Services processing may result in packet being
marked on both ingress to a network and on egress from it, and
that ingress and egress can occur in the same router."
::= { diffServDscpMarkActEntry 1 }
--
-- Count Action Table
--
-- Because the MIB structure allows multiple cascading
-- diffServActionEntry be used to describe multiple actions for a data
-- path, the counter became an optional action type. In normal
-- implementation, either a data path has counters or it does not, as
-- opposed to being configurable. The management entity may choose to
-- read the counter or not. Hence it is recommended for implementation
-- that have counters to always configure the count action as the first
-- of multiple actions.
--
diffServCountActNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for
diffServCountActId, or a zero to indicate that none exist."
::= { diffServAction 4 }
diffServCountActTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServCountActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains counters for all the traffic passing through
an action element."
::= { diffServAction 5 }
diffServCountActEntry OBJECT-TYPE
SYNTAX DiffServCountActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the count action table describes a single set of
traffic counters."
INDEX { diffServCountActId }
::= { diffServCountActTable 1 }
DiffServCountActEntry ::= SEQUENCE {
diffServCountActId IndexInteger,
diffServCountActOctets Counter64,
diffServCountActPkts Counter64,
diffServCountActStorage StorageType,
diffServCountActStatus RowStatus
}
diffServCountActId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Count Action entries. Managers
obtain new values for row creation in this table by reading
diffServCountActNextFree."
::= { diffServCountActEntry 1 }
diffServCountActOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets at the Action data path element.
Discontinuities in the value of this counter can occur at re-
initialization of the management system and at other times as
indicated by the value of ifCounterDiscontinuityTime on the
relevant interface."
::= { diffServCountActEntry 2 }
diffServCountActPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets at the Action data path element.
Discontinuities in the value of this counter can occur at re-
initialization of the management system and at other times as
indicated by the value of ifCounterDiscontinuityTime on the
relevant interface."
::= { diffServCountActEntry 3 }
diffServCountActStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServCountActEntry 4 }
diffServCountActStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServCountActEntry 5 }
--
-- Algorithmic Drop Table
--
diffServAlgDrop OBJECT IDENTIFIER ::= { diffServMIBObjects 6 }
diffServAlgDropNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServAlgDropId, or a
zero to indicate that none exist."
::= { diffServAlgDrop 1 }
diffServAlgDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServAlgDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The algorithmic drop table contains entries describing an
element that drops packets according to some algorithm."
::= { diffServAlgDrop 2 }
diffServAlgDropEntry OBJECT-TYPE
SYNTAX DiffServAlgDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describes a process that drops packets according to
some algorithm. Further details of the algorithm type are to be
found in diffServAlgDropType and with more detail parameter entry
pointed to by diffServAlgDropSpecific when necessary."
INDEX { diffServAlgDropId }
::= { diffServAlgDropTable 1 }
DiffServAlgDropEntry ::= SEQUENCE {
diffServAlgDropId IndexInteger,
diffServAlgDropType INTEGER,
diffServAlgDropNext RowPointer,
diffServAlgDropQMeasure RowPointer,
diffServAlgDropQThreshold Unsigned32,
diffServAlgDropSpecific RowPointer,
diffServAlgDropOctets Counter64,
diffServAlgDropPkts Counter64,
diffServAlgRandomDropOctets Counter64,
diffServAlgRandomDropPkts Counter64,
diffServAlgDropStorage StorageType,
diffServAlgDropStatus RowStatus
}
diffServAlgDropId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Algorithmic Dropper entries.
Managers obtain new values for row creation in this table by
reading diffServAlgDropNextFree."
::= { diffServAlgDropEntry 1 }
diffServAlgDropType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
tailDrop(2),
headDrop(3),
randomDrop(4),
alwaysDrop(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of algorithm used by this dropper. The value other(1)
requires further specification in some other MIB module.
In the tailDrop(2) algorithm, diffServAlgDropQThreshold
represents the maximum depth of the queue, pointed to by
diffServAlgDropQMeasure, beyond which all newly arriving packets
will be dropped.
In the headDrop(3) algorithm, if a packet arrives when the
current depth of the queue, pointed to by
diffServAlgDropQMeasure, is at diffServAlgDropQThreshold, packets
currently at the head of the queue are dropped to make room for
the new packet to be enqueued at the tail of the queue.
In the randomDrop(4) algorithm, on packet arrival, an Active
Queue Management algorithm is executed which may randomly drop a
packet. This algorithm may be proprietary, and it may drop either
the arriving packet or another packet in the queue.
diffServAlgDropSpecific points to a diffServRandomDropEntry that
describes the algorithm. For this algorithm,
diffServAlgDropQThreshold is understood to be the absolute
maximum size of the queue and additional parameters are described
in diffServRandomDropTable.
The alwaysDrop(5) algorithm is as its name specifies; always
drop. In this case, the other configuration values in this Entry
are not meaningful; There is no useful 'next' processing step,
there is no queue, and parameters describing the queue are not
useful. Therefore, diffServAlgDropNext, diffServAlgDropMeasure,
and diffServAlgDropSpecific are all zeroDotZero."
::= { diffServAlgDropEntry 2 }
diffServAlgDropNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This selects the next Differentiated Services Functional Data
Path Element to handle traffic for this data path. This
RowPointer should point to an instance of one of:
diffServClfrEntry
diffServMeterEntry
diffServActionEntry
diffServQEntry
A value of zeroDotZero in this attribute indicates no further
Differentiated Services treatment is performed on traffic of this
data path. The use of zeroDotZero is the normal usage for the
last functional data path element of the current data path.
When diffServAlgDropType is alwaysDrop(5), this object is
ignored.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServAlgDropEntry 3 }
diffServAlgDropQMeasure OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Points to an entry in the diffServQTable to indicate the queue
that a drop algorithm is to monitor when deciding whether to drop
a packet. If the row pointed to does not exist, the algorithmic
dropper element is considered inactive.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServAlgDropEntry 4 }
diffServAlgDropQThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "Bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold on the depth in bytes of the queue being measured at
which a trigger is generated to the dropping algorithm, unless
diffServAlgDropType is alwaysDrop(5) where this object is
ignored.
For the tailDrop(2) or headDrop(3) algorithms, this represents
the depth of the queue, pointed to by diffServAlgDropQMeasure, at
which the drop action will take place. Other algorithms will need
to define their own semantics for this threshold."
::= { diffServAlgDropEntry 5 }
diffServAlgDropSpecific OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Points to a table entry that provides further detail regarding a
drop algorithm.
Entries with diffServAlgDropType equal to other(1) may have this
point to a table defined in another MIB module.
Entries with diffServAlgDropType equal to randomDrop(4) must have
this point to an entry in diffServRandomDropTable.
For all other algorithms specified in this MIB, this should take
the value zeroDotZero.
The diffServAlgDropType is authoritative for the type of the drop
algorithm and the specific parameters for the drop algorithm
needs to be evaluated based on the diffServAlgDropType.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServAlgDropEntry 6 }
diffServAlgDropOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that have been deterministically dropped by
this drop process.
Discontinuities in the value of this counter can occur at re-
initialization of the management system and at other times as
indicated by the value of ifCounterDiscontinuityTime on the
relevant interface."
::= { diffServAlgDropEntry 7 }
diffServAlgDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that have been deterministically dropped
by this drop process.
Discontinuities in the value of this counter can occur at re-
initialization of the management system and at other times as
indicated by the value of ifCounterDiscontinuityTime on the
relevant interface."
::= { diffServAlgDropEntry 8 }
diffServAlgRandomDropOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that have been randomly dropped by this
drop process. This counter applies, therefore, only to random
droppers.
Discontinuities in the value of this counter can occur at re-
initialization of the management system and at other times as
indicated by the value of ifCounterDiscontinuityTime on the
relevant interface."
::= { diffServAlgDropEntry 9 }
diffServAlgRandomDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that have been randomly dropped by this
drop process. This counter applies, therefore, only to random
droppers.
Discontinuities in the value of this counter can occur at re-
initialization of the management system and at other times as
indicated by the value of ifCounterDiscontinuityTime on the
relevant interface."
::= { diffServAlgDropEntry 10 }
diffServAlgDropStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServAlgDropEntry 11 }
diffServAlgDropStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServAlgDropEntry 12 }
--
-- Random Drop Table
--
diffServRandomDropNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServRandomDropId,
or a zero to indicate that none exist."
::= { diffServAlgDrop 3 }
diffServRandomDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServRandomDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The random drop table contains entries describing a process that
drops packets randomly. Entries in this table are pointed to by
diffServAlgDropSpecific."
::= { diffServAlgDrop 4 }
diffServRandomDropEntry OBJECT-TYPE
SYNTAX DiffServRandomDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describes a process that drops packets according to a
random algorithm."
INDEX { diffServRandomDropId }
::= { diffServRandomDropTable 1 }
DiffServRandomDropEntry ::= SEQUENCE {
diffServRandomDropId IndexInteger,
diffServRandomDropMinThreshBytes Unsigned32,
diffServRandomDropMinThreshPkts Unsigned32,
diffServRandomDropMaxThreshBytes Unsigned32,
diffServRandomDropMaxThreshPkts Unsigned32,
diffServRandomDropProbMax Unsigned32,
diffServRandomDropWeight Unsigned32,
diffServRandomDropSamplingRate Unsigned32,
diffServRandomDropStorage StorageType,
diffServRandomDropStatus RowStatus
}
diffServRandomDropId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Random Drop entries. Managers
obtain new values for row creation in this table by reading
diffServRandomDropNextFree."
::= { diffServRandomDropEntry 1 }
diffServRandomDropMinThreshBytes OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The average queue depth in bytes, beyond which traffic has a
non-zero probability of being dropped. Changes in this variable
may or may not be reflected in the reported value of
diffServRandomDropMinThreshPkts."
::= { diffServRandomDropEntry 2 }
diffServRandomDropMinThreshPkts OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "packets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The average queue depth in packets, beyond which traffic has a
non-zero probability of being dropped. Changes in this variable
may or may not be reflected in the reported value of
diffServRandomDropMinThreshBytes."
::= { diffServRandomDropEntry 3 }
diffServRandomDropMaxThreshBytes OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The average queue depth beyond which traffic has a probability
indicated by diffServRandomDropProbMax of being dropped or
marked. Note that this differs from the physical queue limit,
which is stored in diffServAlgDropQThreshold. Changes in this
variable may or may not be reflected in the reported value of
diffServRandomDropMaxThreshPkts."
::= { diffServRandomDropEntry 4 }
diffServRandomDropMaxThreshPkts OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "packets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The average queue depth beyond which traffic has a probability
indicated by diffServRandomDropProbMax of being dropped or
marked. Note that this differs from the physical queue limit,
which is stored in diffServAlgDropQThreshold. Changes in this
variable may or may not be reflected in the reported value of
diffServRandomDropMaxThreshBytes."
::= { diffServRandomDropEntry 5 }
diffServRandomDropProbMax OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The worst case random drop probability, expressed in drops per
thousand packets.
For example, if in the worst case every arriving packet may be
dropped (100%) for a period, this has the value 1000.
Alternatively, if in the worst case only one percent (1%) of
traffic may be dropped, it has the value 10."
::= { diffServRandomDropEntry 6 }
diffServRandomDropWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weighting of past history in affecting the Exponentially
Weighted Moving Average function that calculates the current
average queue depth. The equation uses
diffServRandomDropWeight/65536 as the coefficient for the new
sample in the equation, and (65536 -
diffServRandomDropWeight)/65536 as the coefficient of the old
value.
Implementations may limit the values of diffServRandomDropWeight
to a subset of the possible range of values, such as powers of
two. Doing this would facilitate implementation of the
Exponentially Weighted Moving Average using shift instructions or
registers."
::= { diffServRandomDropEntry 7 }
diffServRandomDropSamplingRate OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of times per second the queue is sampled for queue
average calculation. A value of zero is used to mean that the
queue is sampled approximately each time a packet is enqueued (or
dequeued)."
::= { diffServRandomDropEntry 8 }
diffServRandomDropStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServRandomDropEntry 9 }
diffServRandomDropStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServRandomDropEntry 10 }
--
-- Queue Table
--
diffServQueue OBJECT IDENTIFIER ::= { diffServMIBObjects 7 }
--
-- An entry of diffServQTable represents a FIFO queue Differentiated
-- Services Functional Data Path element as described in the Informal
-- Differentiated Services Model section 7.1.1. Note that the
-- specification of scheduling parameters for a queue as part of the
-- input to a scheduler functional data path element as described in
-- the Informal Differentiated Services Model section 7.1.2. This
-- allows building of hierarchical queuing/scheduling. A queue
-- therefore has these attributes:
--
-- 1. Which scheduler will service this queue, diffServQNext.
-- 2. How the scheduler will service this queue, with respect
-- to all the other queues the same scheduler needs to service,
-- diffServQMinRate.
--
-- Note that upstream Differentiated Services Functional Data Path
-- elements may point to a shared diffServQTable entry as described
-- in the Informal Differentiated Services Model section 7.1.1.
--
diffServQNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServQId, or a zero
to indicate that none exist."
::= { diffServQueue 1 }
diffServQTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Queue Table enumerates the individual queues. Note that the
MIB models queuing systems as composed of individual queues, one
per class of traffic, even though they may in fact be structured
as classes of traffic scheduled using a common calendar queue, or
in other ways."
::= { diffServQueue 2 }
diffServQEntry OBJECT-TYPE
SYNTAX DiffServQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Queue Table describes a single queue or class of
traffic."
INDEX { diffServQId }
::= { diffServQTable 1 }
DiffServQEntry ::= SEQUENCE {
diffServQId IndexInteger,
diffServQNext RowPointer,
diffServQMinRate RowPointer,
diffServQMaxRate RowPointer,
diffServQStorage StorageType,
diffServQStatus RowStatus
}
diffServQId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Queue entries. Managers obtain new
values for row creation in this table by reading
diffServQNextFree."
::= { diffServQEntry 1 }
diffServQNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This selects the next Differentiated Services Scheduler. The
RowPointer must point to a diffServSchedulerEntry.
A value of zeroDotZero in this attribute indicates an incomplete
diffServQEntry instance. In such a case, the entry has no
operational effect, since it has no parameters to give it
meaning.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServQEntry 2 }
diffServQMinRate OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowPointer indicates the diffServMinRateEntry that the
scheduler, pointed to by diffServQNext, should use to service
this queue.
If the row pointed to is zeroDotZero, the minimum rate and
priority is unspecified.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServQEntry 3 }
diffServQMaxRate OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowPointer indicates the diffServMaxRateEntry that the
scheduler, pointed to by diffServQNext, should use to service
this queue.
If the row pointed to is zeroDotZero, the maximum rate is the
line speed of the interface.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
::= { diffServQEntry 4 }
diffServQStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServQEntry 5 }
diffServQStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServQEntry 6 }
--
-- Scheduler Table
--
diffServScheduler OBJECT IDENTIFIER ::= { diffServMIBObjects 8 }
--
-- A Scheduler Entry represents a packet scheduler, such as a priority
-- scheduler or a WFQ scheduler. It provides flexibility for multiple
-- scheduling algorithms, each servicing multiple queues, to be used on
-- the same logical/physical interface.
--
-- Note that upstream queues or schedulers specify several of the
-- scheduler's parameters. These must be properly specified if the
-- scheduler is to behave as expected.
--
-- The diffServSchedulerMaxRate attribute specifies the parameters when
-- a scheduler's output is sent to another scheduler. This is used in
-- building hierarchical queues or schedulers.
--
-- More discussion of the scheduler functional data path element is in
-- the Informal Differentiated Services Model section 7.1.2.
--
diffServSchedulerNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServSchedulerId, or
a zero to indicate that none exist."
::= { diffServScheduler 1 }
diffServSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Scheduler Table enumerates packet schedulers. Multiple
scheduling algorithms can be used on a given data path, with each
algorithm described by one diffServSchedulerEntry."
::= { diffServScheduler 2 }
diffServSchedulerEntry OBJECT-TYPE
SYNTAX DiffServSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Scheduler Table describing a single instance of
a scheduling algorithm."
INDEX { diffServSchedulerId }
::= { diffServSchedulerTable 1 }
DiffServSchedulerEntry ::= SEQUENCE {
diffServSchedulerId IndexInteger,
diffServSchedulerNext RowPointer,
diffServSchedulerMethod AutonomousType,
diffServSchedulerMinRate RowPointer,
diffServSchedulerMaxRate RowPointer,
diffServSchedulerStorage StorageType,
diffServSchedulerStatus RowStatus
}
diffServSchedulerId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Scheduler entries. Managers obtain
new values for row creation in this table by reading
diffServSchedulerNextFree."
::= { diffServSchedulerEntry 1 }
diffServSchedulerNext OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This selects the next Differentiated Services Functional Data
Path Element to handle traffic for this data path. This normally
is null (zeroDotZero), or points to a diffServSchedulerEntry or a
diffServQEntry.
However, this RowPointer may also point to an instance of:
diffServClfrEntry,
diffServMeterEntry,
diffServActionEntry,
diffServAlgDropEntry.
It would point another diffServSchedulerEntry when implementing
multiple scheduler methods for the same data path, such as having
one set of queues scheduled by WRR and that group participating
in a priority scheduling system in which other queues compete
with it in that way. It might also point to a second scheduler
in a hierarchical scheduling system.
If the row pointed to is zeroDotZero, no further Differentiated
Services treatment is performed on traffic of this data path.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
DEFVAL { zeroDotZero }
::= { diffServSchedulerEntry 2 }
diffServSchedulerMethod OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The scheduling algorithm used by this Scheduler. zeroDotZero
indicates that this is unknown. Standard values for generic
algorithms: diffServSchedulerPriority, diffServSchedulerWRR, and
diffServSchedulerWFQ are specified in this MIB; additional values
may be further specified in other MIBs."
::= { diffServSchedulerEntry 3 }
diffServSchedulerMinRate OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowPointer indicates the entry in diffServMinRateTable
which indicates the priority or minimum output rate from this
scheduler. This attribute is used only when there is more than
one level of scheduler.
When it has the value zeroDotZero, it indicates that no minimum
rate or priority is imposed.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
DEFVAL { zeroDotZero }
::= { diffServSchedulerEntry 4 }
diffServSchedulerMaxRate OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowPointer indicates the entry in diffServMaxRateTable
which indicates the maximum output rate from this scheduler.
When more than one maximum rate applies (eg, when a multi-rate
shaper is in view), it points to the first of those rate entries.
This attribute is used only when there is more than one level of
scheduler.
When it has the value zeroDotZero, it indicates that no maximum
rate is imposed.
Setting this to point to a target that does not exist results in
an inconsistentValue error. If the row pointed to is removed or
becomes inactive by other means, the treatment is as if this
attribute contains a value of zeroDotZero."
DEFVAL { zeroDotZero }
::= { diffServSchedulerEntry 5 }
diffServSchedulerStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServSchedulerEntry 6 }
diffServSchedulerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServSchedulerEntry 7 }
--
-- OIDs for diffServTBParamType definitions.
--
diffServSchedulers OBJECT IDENTIFIER ::= { diffServMIBAdmin 2 }
diffServSchedulerPriority OBJECT-IDENTITY
STATUS current
DESCRIPTION
"For use with diffServSchedulerMethod to indicate the Priority
scheduling method. This is defined as an algorithm in which the
presence of data in a queue or set of queues absolutely precludes
dequeue from another queue or set of queues of lower priority.
Note that attributes from diffServMinRateEntry of the
queues/schedulers feeding this scheduler are used when
determining the next packet to schedule."
::= { diffServSchedulers 1 }
diffServSchedulerWRR OBJECT-IDENTITY
STATUS current
DESCRIPTION
"For use with diffServSchedulerMethod to indicate the Weighted
Round Robin scheduling method, defined as any algorithm in which
a set of queues are visited in a fixed order, and varying amounts
of traffic are removed from each queue in turn to implement an
average output rate by class. Notice attributes from
diffServMinRateEntry of the queues/schedulers feeding this
scheduler are used when determining the next packet to schedule."
::= { diffServSchedulers 2 }
diffServSchedulerWFQ OBJECT-IDENTITY
STATUS current
DESCRIPTION
"For use with diffServSchedulerMethod to indicate the Weighted
Fair Queuing scheduling method, defined as any algorithm in which
a set of queues are conceptually visited in some order, to
implement an average output rate by class. Notice attributes from
diffServMinRateEntry of the queues/schedulers feeding this
scheduler are used when determining the next packet to schedule."
::= { diffServSchedulers 3 }
--
-- Minimum Rate Parameters Table
--
-- The parameters used by a scheduler for its inputs or outputs are
-- maintained separately from the Queue or Scheduler table entries for
-- reusability reasons and so that they may be used by both queues and
-- schedulers. This follows the approach for separation of data path
-- elements from parameterization that is used throughout this MIB.
-- Use of these Minimum Rate Parameter Table entries by Queues and
-- Schedulers allows the modeling of hierarchical scheduling systems.
--
-- Specifically, a Scheduler has one or more inputs and one output.
-- Any queue feeding a scheduler, or any scheduler which feeds a second
-- scheduler, might specify a minimum transfer rate by pointing to an
-- Minimum Rate Parameter Table entry.
--
-- The diffServMinRatePriority/Abs/Rel attributes are used as
-- parameters to the work-conserving portion of a scheduler:
-- "work-conserving" implies that the scheduler can continue to emit
-- data as long as there is data available at its input(s). This has
-- the effect of guaranteeing a certain priority relative to other
-- scheduler inputs and/or a certain minimum proportion of the
-- available output bandwidth. Properly configured, this means a
-- certain minimum rate, which may be exceeded should traffic be
-- available should there be spare bandwidth after all other classes
-- have had opportunities to consume their own minimum rates.
--
diffServMinRateNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServMinRateId, or a
zero to indicate that none exist."
::= { diffServScheduler 3 }
diffServMinRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMinRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Minimum Rate Parameters Table enumerates individual sets of
scheduling parameter that can be used/reused by Queues and
Schedulers."
::= { diffServScheduler 4 }
diffServMinRateEntry OBJECT-TYPE
SYNTAX DiffServMinRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Minimum Rate Parameters Table describes a single
set of scheduling parameters for use by one or more queues or
schedulers."
INDEX { diffServMinRateId }
::= { diffServMinRateTable 1 }
DiffServMinRateEntry ::= SEQUENCE {
diffServMinRateId IndexInteger,
diffServMinRatePriority Unsigned32,
diffServMinRateAbsolute Unsigned32,
diffServMinRateRelative Unsigned32,
diffServMinRateStorage StorageType,
diffServMinRateStatus RowStatus
}
diffServMinRateId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Scheduler Parameter entries.
Managers obtain new values for row creation in this table by
reading diffServMinRateNextFree."
::= { diffServMinRateEntry 1 }
diffServMinRatePriority OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this input to the associated scheduler, relative
to the scheduler's other inputs. A queue or scheduler with a
larger numeric value will be served before another with a smaller
numeric value."
::= { diffServMinRateEntry 2 }
diffServMinRateAbsolute OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum absolute rate, in kilobits/sec, that a downstream
scheduler element should allocate to this queue. If the value is
zero, then there is effectively no minimum rate guarantee. If the
value is non-zero, the scheduler will assure the servicing of
this queue to at least this rate.
Note that this attribute value and that of
diffServMinRateRelative are coupled: changes to one will affect
the value of the other. They are linked by the following
equation, in that setting one will change the other:
diffServMinRateRelative =
(diffServMinRateAbsolute*1000000)/ifSpeed
or, if appropriate:
diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed"
REFERENCE
"ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
::= { diffServMinRateEntry 3 }
diffServMinRateRelative OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum rate that a downstream scheduler element should
allocate to this queue, relative to the maximum rate of the
interface as reported by ifSpeed or ifHighSpeed, in units of
1/1000 of 1. If the value is zero, then there is effectively no
minimum rate guarantee. If the value is non-zero, the scheduler
will assure the servicing of this queue to at least this rate.
Note that this attribute value and that of
diffServMinRateAbsolute are coupled: changes to one will affect
the value of the other. They are linked by the following
equation, in that setting one will change the other:
diffServMinRateRelative =
(diffServMinRateAbsolute*1000000)/ifSpeed
or, if appropriate:
diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed"
REFERENCE
"ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
::= { diffServMinRateEntry 4 }
diffServMinRateStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServMinRateEntry 5 }
diffServMinRateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServMinRateEntry 6 }
--
-- Maximum Rate Parameter Table
--
-- The parameters used by a scheduler for its inputs or outputs are
-- maintained separately from the Queue or Scheduler table entries for
-- reusability reasons and so that they may be used by both queues and
-- schedulers. This follows the approach for separation of data path
-- elements from parameterization that is used throughout this MIB.
-- Use of these Maximum Rate Parameter Table entries by Queues and
-- Schedulers allows the modeling of hierarchical scheduling systems.
--
-- Specifically, a Scheduler has one or more inputs and one output.
-- Any queue feeding a scheduler, or any scheduler which feeds a second
-- scheduler, might specify a maximum transfer rate by pointing to a
-- Maximum Rate Parameter Table entry. Multi-rate shapers, such as a
-- Dual Leaky Bucket algorithm, specify their rates using multiple
-- Maximum Rate Parameter Entries with the same diffServMaxRateId but
-- different diffServMaxRateLevels.
--
-- The diffServMaxRateLevel/Abs/Rel attributes are used as
-- parameters to the non-work-conserving portion of a scheduler:
-- non-work-conserving implies that the scheduler may sometimes not
-- emit a packet, even if there is data available at its input(s).
-- This has the effect of limiting the servicing of the queue/scheduler
-- input or output, in effect performing shaping of the packet stream
-- passing through the queue/scheduler, as described in the Informal
-- Differentiated Services Model section 7.2.
--
diffServMaxRateNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for diffServMaxRateId, or a
zero to indicate that none exist."
::= { diffServScheduler 5 }
diffServMaxRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMaxRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maximum Rate Parameter Table enumerates individual sets of
scheduling parameter that can be used/reused by Queues and
Schedulers."
::= { diffServScheduler 6 }
diffServMaxRateEntry OBJECT-TYPE
SYNTAX DiffServMaxRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Maximum Rate Parameter Table describes a single
set of scheduling parameters for use by one or more queues or
schedulers."
INDEX { diffServMaxRateId, diffServMaxRateLevel }
::= { diffServMaxRateTable 1 }
DiffServMaxRateEntry ::= SEQUENCE {
diffServMaxRateId IndexInteger,
diffServMaxRateLevel Unsigned32,
diffServMaxRateAbsolute Unsigned32,
diffServMaxRateRelative Unsigned32,
diffServMaxRateThreshold BurstSize,
diffServMaxRateStorage StorageType,
diffServMaxRateStatus RowStatus
}
diffServMaxRateId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Maximum Rate Parameter entries.
Managers obtain new values for row creation in this table by
reading diffServMaxRateNextFree."
::= { diffServMaxRateEntry 1 }
diffServMaxRateLevel OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that indicates which level of a multi-rate shaper is
being given its parameters. A multi-rate shaper has some number
of rate levels. Frame Relay's dual rate specification refers to a
'committed' and an 'excess' rate; ATM's dual rate specification
refers to a 'mean' and a 'peak' rate. This table is generalized
to support an arbitrary number of rates. The committed or mean
rate is level 1, the peak rate (if any) is the highest level rate
configured, and if there are other rates they are distributed in
monotonically increasing order between them."
::= { diffServMaxRateEntry 2 }
diffServMaxRateAbsolute OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum rate in kilobits/sec that a downstream scheduler
element should allocate to this queue. If the value is zero, then
there is effectively no maximum rate limit and that the scheduler
should attempt to be work conserving for this queue. If the value
is non-zero, the scheduler will limit the servicing of this queue
to, at most, this rate in a non-work-conserving manner.
Note that this attribute value and that of
diffServMaxRateRelative are coupled: changes to one will affect
the value of the other. They are linked by the following
equation, in that setting one will change the other:
diffServMaxRateRelative =
(diffServMaxRateAbsolute*1000000)/ifSpeed
or, if appropriate:
diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed"
REFERENCE
"ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
::= { diffServMaxRateEntry 3 }
diffServMaxRateRelative OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum rate that a downstream scheduler element should
allocate to this queue, relative to the maximum rate of the
interface as reported by ifSpeed or ifHighSpeed, in units of
1/1000 of 1. If the value is zero, then there is effectively no
maximum rate limit and the scheduler should attempt to be work
conserving for this queue. If the value is non-zero, the
scheduler will limit the servicing of this queue to, at most,
this rate in a non-work-conserving manner.
Note that this attribute value and that of
diffServMaxRateAbsolute are coupled: changes to one will affect
the value of the other. They are linked by the following
equation, in that setting one will change the other:
diffServMaxRateRelative =
(diffServMaxRateAbsolute*1000000)/ifSpeed
or, if appropriate:
diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed"
REFERENCE
"ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
::= { diffServMaxRateEntry 4 }
diffServMaxRateThreshold OBJECT-TYPE
SYNTAX BurstSize
UNITS "Bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of bytes of queue depth at which the rate of a
multi-rate scheduler will increase to the next output rate. In
the last conceptual row for such a shaper, this threshold is
ignored and by convention is zero."
REFERENCE
"Adaptive rate Shaper, RFC 2963"
::= { diffServMaxRateEntry 5 }
diffServMaxRateStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { diffServMaxRateEntry 6 }
diffServMaxRateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { diffServMaxRateEntry 7 }
--
-- MIB Compliance statements.
--
diffServMIBCompliances OBJECT IDENTIFIER ::=
{ diffServMIBConformance 1 }
diffServMIBGroups OBJECT IDENTIFIER ::=
{ diffServMIBConformance 2 }
diffServMIBFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"When this MIB is implemented with support for read-create, then
such an implementation can claim full compliance. Such devices
can then be both monitored and configured with this MIB."
MODULE IF-MIB -- The interfaces MIB, RFC2863
MANDATORY-GROUPS {
ifCounterDiscontinuityGroup
}
MODULE -- This Module
MANDATORY-GROUPS {
diffServMIBDataPathGroup, diffServMIBClfrGroup,
diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup,
diffServMIBActionGroup, diffServMIBAlgDropGroup,
diffServMIBQGroup, diffServMIBSchedulerGroup,
diffServMIBMaxRateGroup, diffServMIBMinRateGroup,
diffServMIBCounterGroup
}
GROUP diffServMIBMeterGroup
DESCRIPTION
"This group is mandatory for devices that implement metering
functions."
GROUP diffServMIBTBParamGroup
DESCRIPTION
"This group is mandatory for devices that implement token-bucket
metering functions."
GROUP diffServMIBDscpMarkActGroup
DESCRIPTION
"This group is mandatory for devices that implement DSCP-Marking
functions."
GROUP diffServMIBRandomDropGroup
DESCRIPTION
"This group is mandatory for devices that implement Random Drop
functions."
OBJECT diffServDataPathStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServClfrStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServClfrElementStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServMultiFieldClfrAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv4 and IPv6
addresses."
OBJECT diffServMultiFieldClfrDstAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION
"An implementation is only required to support IPv4 and globally
unique IPv6 addresses."
OBJECT diffServAlgDropStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServRandomDropStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServQStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServSchedulerStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServMinRateStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServMaxRateStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
::= { diffServMIBCompliances 1 }
--
-- Read-Only Compliance
--
diffServMIBReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"When this MIB is implemented without support for read-create
(i.e. in read-only mode), then such an implementation can claim
read-only compliance. Such a device can then be monitored but can
not be configured with this MIB."
MODULE IF-MIB -- The interfaces MIB, RFC2863
MANDATORY-GROUPS {
ifCounterDiscontinuityGroup
}
MODULE -- This Module
MANDATORY-GROUPS {
diffServMIBDataPathGroup, diffServMIBClfrGroup,
diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup,
diffServMIBActionGroup, diffServMIBAlgDropGroup,
diffServMIBQGroup, diffServMIBSchedulerGroup,
diffServMIBMaxRateGroup, diffServMIBMinRateGroup,
diffServMIBCounterGroup
}
GROUP diffServMIBMeterGroup
DESCRIPTION
"This group is mandatory for devices that implement metering
functions."
GROUP diffServMIBTBParamGroup
DESCRIPTION
"This group is mandatory for devices that implement token-bucket
metering functions."
GROUP diffServMIBDscpMarkActGroup
DESCRIPTION
"This group is mandatory for devices that implement DSCP-Marking
functions."
GROUP diffServMIBRandomDropGroup
DESCRIPTION
"This group is mandatory for devices that implement Random Drop
functions."
OBJECT diffServDataPathStart
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServDataPathStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServDataPathStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServClfrNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object not needed when diffServClfrTable is implemented read-
only"
OBJECT diffServClfrStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServClfrStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServClfrElementNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object not needed when diffServClfrelementTable is implemented
read-only"
OBJECT diffServClfrElementPrecedence
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServClfrElementNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServClfrElementSpecific
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServClfrElementStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServClfrElementStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServMultiFieldClfrNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServMultiFieldClfrTable is
implemented in read-only mode."
OBJECT diffServMultiFieldClfrAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only required
to support IPv4 and IPv6 addresses."
OBJECT diffServMultiFieldClfrDstAddr
SYNTAX InetAddress (SIZE(0|4|16))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only required
to support IPv4 and globally unique IPv6 addresses."
OBJECT diffServMultiFieldClfrDstPrefixLength
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrSrcAddr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only required
to support IPv4 and globally unique IPv6 addresses."
OBJECT diffServMultiFieldClfrSrcPrefixLength
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrDscp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrFlowId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrDstL4PortMin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrDstL4PortMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrSrcL4PortMin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrSrcL4PortMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMultiFieldClfrStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, createAndWait and notInService
support is not required."
OBJECT diffServMeterNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServMultiFieldClfrTable is
implemented in read-only mode."
OBJECT diffServMeterSucceedNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMeterFailNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMeterSpecific
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMeterStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMeterStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServTBParamNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServTBParamTable is implemented in
read-only mode."
OBJECT diffServTBParamType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServTBParamRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServTBParamBurstSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServTBParamInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServTBParamStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServTBParamStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServActionNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServActionTable is implemented in
read-only mode."
OBJECT diffServActionInterface
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServActionNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServActionSpecific
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServActionStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServActionStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServCountActNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServCountActTable is implemented
in read-only mode."
OBJECT diffServCountActStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServCountActStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServAlgDropNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServAlgDropTable is implemented in
read-only mode."
OBJECT diffServAlgDropType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServAlgDropNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServAlgDropQMeasure
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServAlgDropQThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServAlgDropSpecific
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServAlgDropStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServAlgDropStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServRandomDropNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServRandomDropTable is implemented
in read-only mode."
OBJECT diffServRandomDropMinThreshBytes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropMinThreshPkts
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropMaxThreshBytes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropMaxThreshPkts
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropProbMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropWeight
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropSamplingRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServRandomDropStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServQNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServQTable is implemented in
read-only mode."
OBJECT diffServQNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServQMinRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServQMaxRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServQStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServQStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServSchedulerNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServSchedulerTable is implemented
in read-only mode."
OBJECT diffServSchedulerNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServSchedulerMethod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServSchedulerMinRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServSchedulerMaxRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServSchedulerStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServSchedulerStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServMinRateNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServMinRateTable is implemented in
read-only mode."
OBJECT diffServMinRatePriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMinRateAbsolute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMinRateRelative
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMinRateStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMinRateStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
OBJECT diffServMaxRateNextFree
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when diffServMaxrateTable is implemented in
read-only mode."
OBJECT diffServMaxRateAbsolute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMaxRateRelative
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMaxRateThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMaxRateStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT diffServMaxRateStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only status that
needs to be supported."
::= { diffServMIBCompliances 2 }
diffServMIBDataPathGroup OBJECT-GROUP
OBJECTS {
diffServDataPathStart, diffServDataPathStorage,
diffServDataPathStatus
}
STATUS current
DESCRIPTION
"The Data Path Group defines the MIB Objects that describe a
functional data path."
::= { diffServMIBGroups 1 }
diffServMIBClfrGroup OBJECT-GROUP
OBJECTS {
diffServClfrNextFree, diffServClfrStorage,
diffServClfrStatus
}
STATUS current
DESCRIPTION
"The Classifier Group defines the MIB Objects that describe the
list the starts of individual classifiers."
::= { diffServMIBGroups 2 }
diffServMIBClfrElementGroup OBJECT-GROUP
OBJECTS {
diffServClfrElementNextFree,
diffServClfrElementPrecedence, diffServClfrElementNext,
diffServClfrElementSpecific, diffServClfrElementStorage,
diffServClfrElementStatus
}
STATUS current
DESCRIPTION
"The Classifier Element Group defines the MIB Objects that
describe the classifier elements that make up a generic
classifier."
::= { diffServMIBGroups 3 }
diffServMIBMultiFieldClfrGroup OBJECT-GROUP
OBJECTS {
diffServMultiFieldClfrNextFree,
diffServMultiFieldClfrAddrType,
diffServMultiFieldClfrDstAddr,
diffServMultiFieldClfrDstPrefixLength,
diffServMultiFieldClfrFlowId,
diffServMultiFieldClfrSrcAddr,
diffServMultiFieldClfrSrcPrefixLength,
diffServMultiFieldClfrDscp,
diffServMultiFieldClfrProtocol,
diffServMultiFieldClfrDstL4PortMin,
diffServMultiFieldClfrDstL4PortMax,
diffServMultiFieldClfrSrcL4PortMin,
diffServMultiFieldClfrSrcL4PortMax,
diffServMultiFieldClfrStorage,
diffServMultiFieldClfrStatus
}
STATUS current
DESCRIPTION
"The Multi-field Classifier Group defines the MIB Objects that
describe a classifier element for matching on various fields of
an IP and upper-layer protocol header."
::= { diffServMIBGroups 4 }
diffServMIBMeterGroup OBJECT-GROUP
OBJECTS {
diffServMeterNextFree, diffServMeterSucceedNext,
diffServMeterFailNext, diffServMeterSpecific,
diffServMeterStorage, diffServMeterStatus
}
STATUS current
DESCRIPTION
"The Meter Group defines the objects used in describing a generic
meter element."
::= { diffServMIBGroups 5 }
diffServMIBTBParamGroup OBJECT-GROUP
OBJECTS {
diffServTBParamNextFree, diffServTBParamType,
diffServTBParamRate, diffServTBParamBurstSize,
diffServTBParamInterval, diffServTBParamStorage,
diffServTBParamStatus
}
STATUS current
DESCRIPTION
"The Token-Bucket Meter Group defines the objects used in
describing a token bucket meter element."
::= { diffServMIBGroups 6 }
diffServMIBActionGroup OBJECT-GROUP
OBJECTS {
diffServActionNextFree, diffServActionNext,
diffServActionSpecific, diffServActionStorage,
diffServActionInterface, diffServActionStatus
}
STATUS current
DESCRIPTION
"The Action Group defines the objects used in describing a
generic action element."
::= { diffServMIBGroups 7 }
diffServMIBDscpMarkActGroup OBJECT-GROUP
OBJECTS {
diffServDscpMarkActDscp
}
STATUS current
DESCRIPTION
"The DSCP Mark Action Group defines the objects used in
describing a DSCP Marking Action element."
::= { diffServMIBGroups 8 }
diffServMIBCounterGroup OBJECT-GROUP
OBJECTS {
diffServCountActOctets, diffServCountActPkts,
diffServAlgDropOctets, diffServAlgDropPkts,
diffServAlgRandomDropOctets, diffServAlgRandomDropPkts,
diffServCountActStorage, diffServCountActStatus,
diffServCountActNextFree
}
STATUS current
DESCRIPTION
"A collection of objects providing information specific to
packet-oriented network interfaces."
::= { diffServMIBGroups 9 }
diffServMIBAlgDropGroup OBJECT-GROUP
OBJECTS {
diffServAlgDropNextFree, diffServAlgDropType,
diffServAlgDropNext, diffServAlgDropQMeasure,
diffServAlgDropQThreshold, diffServAlgDropSpecific,
diffServAlgDropStorage, diffServAlgDropStatus
}
STATUS current
DESCRIPTION
"The Algorithmic Drop Group contains the objects that describe
algorithmic dropper operation and configuration."
::= { diffServMIBGroups 10 }
diffServMIBRandomDropGroup OBJECT-GROUP
OBJECTS {
diffServRandomDropNextFree,
diffServRandomDropMinThreshBytes,
diffServRandomDropMinThreshPkts,
diffServRandomDropMaxThreshBytes,
diffServRandomDropMaxThreshPkts,
diffServRandomDropProbMax,
diffServRandomDropWeight,
diffServRandomDropSamplingRate,
diffServRandomDropStorage,
diffServRandomDropStatus
}
STATUS current
DESCRIPTION
"The Random Drop Group augments the Algorithmic Drop Group for
random dropper operation and configuration."
::= { diffServMIBGroups 11 }
diffServMIBQGroup OBJECT-GROUP
OBJECTS {
diffServQNextFree, diffServQNext, diffServQMinRate,
diffServQMaxRate, diffServQStorage, diffServQStatus
}
STATUS current
DESCRIPTION
"The Queue Group contains the objects that describe an
interface's queues."
::= { diffServMIBGroups 12 }
diffServMIBSchedulerGroup OBJECT-GROUP
OBJECTS {
diffServSchedulerNextFree, diffServSchedulerNext,
diffServSchedulerMethod, diffServSchedulerMinRate,
diffServSchedulerMaxRate, diffServSchedulerStorage,
diffServSchedulerStatus
}
STATUS current
DESCRIPTION
"The Scheduler Group contains the objects that describe packet
schedulers on interfaces."
::= { diffServMIBGroups 13 }
diffServMIBMinRateGroup OBJECT-GROUP
OBJECTS {
diffServMinRateNextFree, diffServMinRatePriority,
diffServMinRateAbsolute, diffServMinRateRelative,
diffServMinRateStorage, diffServMinRateStatus
}
STATUS current
DESCRIPTION
"The Minimum Rate Parameter Group contains the objects that
describe packet schedulers' minimum rate or priority guarantees."
::= { diffServMIBGroups 14 }
diffServMIBMaxRateGroup OBJECT-GROUP
OBJECTS {
diffServMaxRateNextFree, diffServMaxRateAbsolute,
diffServMaxRateRelative, diffServMaxRateThreshold,
diffServMaxRateStorage, diffServMaxRateStatus
}
STATUS current
DESCRIPTION
"The Maximum Rate Parameter Group contains the objects that
describe packet schedulers' maximum rate guarantees."
::= { diffServMIBGroups 15 }
END