Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
DOCS-IETF-BPI2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32,
Unsigned32,
Counter32,
mib-2
FROM SNMPv2-SMI -- [RFC2578]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
TEXTUAL-CONVENTION,
MacAddress,
RowStatus,
TruthValue,
DateAndTime,
StorageType
FROM SNMPv2-TC -- [RFC2579]
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF -- [RFC2580]
ifIndex
FROM IF-MIB -- [RFC2863]
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB; -- [RFC4001]
docsBpi2MIB MODULE-IDENTITY
LAST-UPDATED "200507200000Z" -- July 20, 2005
ORGANIZATION "IETF IP over Cable Data Network (IPCDN)
Working Group"
CONTACT-INFO "---------------------------------------
Stuart M. Green
E-mail: rubbersoul3@yahoo.com
---------------------------------------
Kaz Ozawa
Automotive Systems Development Center
TOSHIBA CORPORATION
1-1, Shibaura 1-Chome
Minato-ku, Tokyo 105-8001
Japan
Phone: +81-3-3457-8569
Fax: +81-3-5444-9325
E-mail: Kazuyoshi.Ozawa@toshiba.co.jp
---------------------------------------
Alexander Katsnelson
Postal:
Tel: +1-303-680-3924
E-mail: katsnelson6@peoplepc.com
---------------------------------------
Eduardo Cardona
Postal:
Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, CO 80027- 9750
U.S.A.
Tel: +1 303 661 9100
Fax: +1 303 661 9199
E-mail: e.cardona@cablelabs.com
---------------------------------------
IETF IPCDN Working Group
General Discussion: ipcdn@ietf.org
Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn.
Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn.
Co-chairs: Richard Woundy, rwoundy@cisco.com
Jean-Francois Mule, jfm@cablelabs.com"
DESCRIPTION
"This is the MIB module for the DOCSIS Baseline
Privacy Plus Interface (BPI+) at cable modems (CMs)
and cable modem termination systems (CMTSs).
Copyright (C) The Internet Society (2005). This
version of this MIB module is part of RFC 4131; see
the RFC itself for full legal notices."
REVISION "200507200000Z" -- July 20, 2005
DESCRIPTION
"Initial version of the IETF BPI+ MIB module.
This version published as RFC 4131."
::= { mib-2 126 }
-- Textual conventions
DocsX509ASN1DEREncodedCertificate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An X509 digital certificate encoded as an ASN.1 DER
object."
SYNTAX OCTET STRING (SIZE (0..4096))
DocsSAId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Security Association identifier (SAID)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface
specification, Section 2.1.3, BPI+ Security
Associations"
SYNTAX Integer32 (1..16383)
DocsSAIdOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Security Association identifier (SAID). The value
zero indicates that the SAID is yet to be determined."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface
specification, Section 2.1.3, BPI+ Security
Associations"
SYNTAX Unsigned32 (0 | 1..16383)
DocsBpkmSAType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of security association (SA).
The values of the named-numbers are associated
with the BPKM SA-Type attributes:
'primary' corresponds to code '1', 'static' to code '2',
and 'dynamic' to code '3'.
The 'none' value must only be used if the SA type has yet
to be determined."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface
specification, Section 4.2.2.24"
SYNTAX INTEGER {
none(0),
primary(1),
static(2),
dynamic(3)
}
DocsBpkmDataEncryptAlg ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The list of data encryption algorithms defined for
the DOCSIS interface in the BPKM cryptographic-suite
parameter. The value 'none' indicates that the SAID
being referenced has no data encryption."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
SYNTAX INTEGER {
none(0),
des56CbcMode(1),
des40CbcMode(2),
t3Des128CbcMode(3),
aes128CbcMode(4),
aes256CbcMode(5)
}
DocsBpkmDataAuthentAlg ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The list of data integrity algorithms defined for the
DOCSIS interface in the BPKM cryptographic-suite parameter.
The value 'none' indicates that no data integrity is used for
the SAID being referenced."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
SYNTAX INTEGER {
none(0),
hmacSha196(1)
}
docsBpi2MIBObjects OBJECT IDENTIFIER ::= { docsBpi2MIB 1 }
-- Cable Modem Group
docsBpi2CmObjects OBJECT IDENTIFIER ::= { docsBpi2MIBObjects 1 }
--
-- The BPI+ base and authorization table for CMs,
-- indexed by ifIndex
--
docsBpi2CmBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the basic and authorization-
related Baseline Privacy Plus attributes of each CM MAC
interface."
::= { docsBpi2CmObjects 1 }
docsBpi2CmBaseEntry OBJECT-TYPE
SYNTAX DocsBpi2CmBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one CM MAC interface. An entry in this table exists for
each ifEntry with an ifType of docsCableMaclayer(127)."
INDEX { ifIndex }
::= { docsBpi2CmBaseTable 1 }
DocsBpi2CmBaseEntry ::= SEQUENCE {
docsBpi2CmPrivacyEnable TruthValue,
docsBpi2CmPublicKey OCTET STRING,
docsBpi2CmAuthState INTEGER,
docsBpi2CmAuthKeySequenceNumber Integer32,
docsBpi2CmAuthExpiresOld DateAndTime,
docsBpi2CmAuthExpiresNew DateAndTime,
docsBpi2CmAuthReset TruthValue,
docsBpi2CmAuthGraceTime Integer32,
docsBpi2CmTEKGraceTime Integer32,
docsBpi2CmAuthWaitTimeout Integer32,
docsBpi2CmReauthWaitTimeout Integer32,
docsBpi2CmOpWaitTimeout Integer32,
docsBpi2CmRekeyWaitTimeout Integer32,
docsBpi2CmAuthRejectWaitTimeout Integer32,
docsBpi2CmSAMapWaitTimeout Integer32,
docsBpi2CmSAMapMaxRetries Integer32,
docsBpi2CmAuthentInfos Counter32,
docsBpi2CmAuthRequests Counter32,
docsBpi2CmAuthReplies Counter32,
docsBpi2CmAuthRejects Counter32,
docsBpi2CmAuthInvalids Counter32,
docsBpi2CmAuthRejectErrorCode INTEGER,
docsBpi2CmAuthRejectErrorString SnmpAdminString,
docsBpi2CmAuthInvalidErrorCode INTEGER,
docsBpi2CmAuthInvalidErrorString SnmpAdminString
}
docsBpi2CmPrivacyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether this CM is
provisioned to run Baseline Privacy Plus."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1."
::= { docsBpi2CmBaseEntry 1 }
docsBpi2CmPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..524))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is a DER-encoded
RSAPublicKey ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1), corresponding to the
public key of the CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.4."
::= { docsBpi2CmBaseEntry 2 }
docsBpi2CmAuthState OBJECT-TYPE
SYNTAX INTEGER {
start(1),
authWait(2),
authorized(3),
reauthWait(4),
authRejectWait(5),
silent(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the state of the CM
authorization FSM. The start state indicates that FSM is
in its initial state."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.2.1."
::= { docsBpi2CmBaseEntry 3 }
docsBpi2CmAuthKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent
authorization key sequence number for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.10."
::= { docsBpi2CmBaseEntry 4 }
docsBpi2CmAuthExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the immediate predecessor of the most recent
authorization key for this FSM. If this FSM has only one
authorization key, then the value is the time of activation
of this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmBaseEntry 5 }
docsBpi2CmAuthExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the most recent authorization key for this
FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmBaseEntry 6 }
docsBpi2CmAuthReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'true' generates a Reauthorize
event in the authorization FSM. Reading this object always
returns FALSE.
This object is for testing purposes only, and therefore it
is not required to be associated with a last reset
object."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.2.3.4."
::= { docsBpi2CmBaseEntry 7 }
docsBpi2CmAuthGraceTime OBJECT-TYPE
SYNTAX Integer32 (1..6047999)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the grace time for an
authorization key in seconds. A CM is expected to start
trying to get a new authorization key beginning
AuthGraceTime seconds before the most recent authorization
key actually expires."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.3."
::= { docsBpi2CmBaseEntry 8 }
docsBpi2CmTEKGraceTime OBJECT-TYPE
SYNTAX Integer32 (1..302399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the grace time for
the TEK in seconds. The CM is expected to start trying to
acquire a new TEK beginning TEK GraceTime seconds before
the expiration of the most recent TEK."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.6."
::= { docsBpi2CmBaseEntry 9 }
docsBpi2CmAuthWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Authorize Wait
Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.1."
::= { docsBpi2CmBaseEntry 10 }
docsBpi2CmReauthWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Reauthorize Wait
Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.2."
::= { docsBpi2CmBaseEntry 11 }
docsBpi2CmOpWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Operational Wait
Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.4."
::= { docsBpi2CmBaseEntry 12 }
docsBpi2CmRekeyWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Rekey Wait Timeout
in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.5."
::= { docsBpi2CmBaseEntry 13 }
docsBpi2CmAuthRejectWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Authorization Reject
Wait Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.7."
::= { docsBpi2CmBaseEntry 14 }
docsBpi2CmSAMapWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the retransmission
interval, in seconds, of SA Map Requests from the MAP Wait
state."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.8."
::= { docsBpi2CmBaseEntry 15 }
docsBpi2CmSAMapMaxRetries OBJECT-TYPE
SYNTAX Integer32 (0..10)
UNITS "count"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the maximum number of
Map Request retries allowed."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.9."
::= { docsBpi2CmBaseEntry 16 }
docsBpi2CmAuthentInfos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times
the CM has transmitted an Authentication Information
message. Discontinuities in the value of this counter can
occur at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.9."
::= { docsBpi2CmBaseEntry 17 }
docsBpi2CmAuthRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has transmitted an Authorization Request message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.1."
::= { docsBpi2CmBaseEntry 18 }
docsBpi2CmAuthReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has received an Authorization Reply message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2."
::= { docsBpi2CmBaseEntry 19 }
docsBpi2CmAuthRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has received an Authorization Reject message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.3."
::= { docsBpi2CmBaseEntry 20 }
docsBpi2CmAuthInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received an Authorization Invalid message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.7."
::= { docsBpi2CmBaseEntry 21 }
docsBpi2CmAuthRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unauthorizedSaid(4),
permanentAuthorizationFailure(8),
timeOfDayNotAcquired(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent
Authorization Reject message received by the CM. This has
the value unknown(2) if the last Error-Code value was 0 and
none(1) if no Authorization Reject message has been received
since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.15."
::= { docsBpi2CmBaseEntry 22 }
docsBpi2CmAuthRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in the
most recent Authorization Reject message received by the
CM. This is a zero length string if no Authorization
Reject message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.6."
::= { docsBpi2CmBaseEntry 23 }
docsBpi2CmAuthInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unsolicited(5),
invalidKeySequence(6),
keyRequestAuthenticationFailure(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent
Authorization Invalid message received by the CM. This has
the value unknown(2) if the last Error-Code value was 0 and
none(1) if no Authorization Invalid message has been received
since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.15."
::= { docsBpi2CmBaseEntry 24 }
docsBpi2CmAuthInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in the
most recent Authorization Invalid message received by the
CM. This is a zero length string if no Authorization
Invalid message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.6."
::= { docsBpi2CmBaseEntry 25 }
--
-- The CM TEK Table, indexed by ifIndex and SAID
--
docsBpi2CmTEKTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of each CM
Traffic Encryption Key (TEK) association. The CM maintains
(no more than) one TEK association per SAID per CM MAC
interface."
::= { docsBpi2CmObjects 2 }
docsBpi2CmTEKEntry OBJECT-TYPE
SYNTAX DocsBpi2CmTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the TEK
association attributes of one SAID. The CM MUST create one
entry per SAID, regardless of whether the SAID was obtained
from a Registration Response message, from an Authorization
Reply message, or from any dynamic SAID establishment
mechanisms."
INDEX { ifIndex, docsBpi2CmTEKSAId }
::= { docsBpi2CmTEKTable 1 }
DocsBpi2CmTEKEntry ::= SEQUENCE {
docsBpi2CmTEKSAId DocsSAId,
docsBpi2CmTEKSAType DocsBpkmSAType,
docsBpi2CmTEKDataEncryptAlg DocsBpkmDataEncryptAlg,
docsBpi2CmTEKDataAuthentAlg DocsBpkmDataAuthentAlg,
docsBpi2CmTEKState INTEGER,
docsBpi2CmTEKKeySequenceNumber Integer32,
docsBpi2CmTEKExpiresOld DateAndTime,
docsBpi2CmTEKExpiresNew DateAndTime,
docsBpi2CmTEKKeyRequests Counter32,
docsBpi2CmTEKKeyReplies Counter32,
docsBpi2CmTEKKeyRejects Counter32,
docsBpi2CmTEKInvalids Counter32,
docsBpi2CmTEKAuthPends Counter32,
docsBpi2CmTEKKeyRejectErrorCode INTEGER,
docsBpi2CmTEKKeyRejectErrorString SnmpAdminString,
docsBpi2CmTEKInvalidErrorCode INTEGER,
docsBpi2CmTEKInvalidErrorString SnmpAdminString
}
docsBpi2CmTEKSAId OBJECT-TYPE
SYNTAX DocsSAId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is the DOCSIS Security
Association ID (SAID)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.12."
::= { docsBpi2CmTEKEntry 1 }
docsBpi2CmTEKSAType OBJECT-TYPE
SYNTAX DocsBpkmSAType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the type of security
association."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmTEKEntry 2 }
docsBpi2CmTEKDataEncryptAlg OBJECT-TYPE
SYNTAX DocsBpkmDataEncryptAlg
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm for this SAID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmTEKEntry 3 }
docsBpi2CmTEKDataAuthentAlg OBJECT-TYPE
SYNTAX DocsBpkmDataAuthentAlg
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm for this SAID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmTEKEntry 4 }
docsBpi2CmTEKState OBJECT-TYPE
SYNTAX INTEGER {
start(1),
opWait(2),
opReauthWait(3),
operational(4),
rekeyWait(5),
rekeyReauthWait(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the state of the
indicated TEK FSM. The start(1) state indicates that the
FSM is in its initial state."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.3.1."
::= { docsBpi2CmTEKEntry 5 }
docsBpi2CmTEKKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent TEK
key sequence number for this TEK FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.2.10 and 4.2.2.13."
::= { docsBpi2CmTEKEntry 6 }
docsBpi2CmTEKExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the immediate predecessor of the most recent
TEK for this FSM. If this FSM has only one TEK, then the
value is the time of activation of this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmTEKEntry 7 }
docsBpi2CmTEKExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the most recent TEK for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmTEKEntry 8 }
docsBpi2CmTEKKeyRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has transmitted a Key Request message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.4."
::= { docsBpi2CmTEKEntry 9 }
docsBpi2CmTEKKeyReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has received a Key Reply message, including a message whose
authentication failed.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.5."
::= { docsBpi2CmTEKEntry 10 }
docsBpi2CmTEKKeyRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has received a Key Reject message, including a message
whose authentication failed.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.6."
::= { docsBpi2CmTEKEntry 11 }
docsBpi2CmTEKInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the CM
has received a TEK Invalid message, including a message
whose authentication failed.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.8."
::= { docsBpi2CmTEKEntry 12 }
docsBpi2CmTEKAuthPends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times an
Authorization Pending (Auth Pend) event occurred in this
FSM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.3.3.3."
::= { docsBpi2CmTEKEntry 13 }
docsBpi2CmTEKKeyRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedSaid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent Key Reject
message received by the CM. This has the value unknown(2) if
the last Error-Code value was 0 and none(1) if no Key
Reject message has been received since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.6 and 4.2.2.15."
::= { docsBpi2CmTEKEntry 14 }
docsBpi2CmTEKKeyRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in the
most recent Key Reject message received by the CM. This is
a zero length string if no Key Reject message has been
received since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.6 and 4.2.2.6."
::= { docsBpi2CmTEKEntry 15 }
docsBpi2CmTEKInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
invalidKeySequence(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent TEK Invalid
message received by the CM. This has the value unknown(2) if
the last Error-Code value was 0 and none(1) if no TEK
Invalid message has been received since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.8 and 4.2.2.15."
::= { docsBpi2CmTEKEntry 16 }
docsBpi2CmTEKInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in the
most recent TEK Invalid message received by the CM. This is
a zero length string if no TEK Invalid message has been
received since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.8 and 4.2.2.6."
::= { docsBpi2CmTEKEntry 17 }
--
-- The CM Multicast Objects Group
--
docsBpi2CmMulticastObjects OBJECT IDENTIFIER
::= { docsBpi2CmObjects 3 }
--
-- The CM Dynamic IP Multicast Mapping Table, indexed by
-- docsBpi2CmIpMulticastIndex and by ifIndex
--
docsBpi2CmIpMulticastMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps multicast IP addresses to SAIDs per
CM MAC Interface.
It is intended to map multicast IP addresses associated
with SA MAP Request messages."
::= { docsBpi2CmMulticastObjects 1 }
docsBpi2CmIpMulticastMapEntry OBJECT-TYPE
SYNTAX DocsBpi2CmIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the mapping of
one multicast IP address to one SAID, as well as
associated state, message counters, and error information.
An entry may be removed from this table upon the reception
of an SA Map Reject."
INDEX { ifIndex, docsBpi2CmIpMulticastIndex }
::= { docsBpi2CmIpMulticastMapTable 1 }
DocsBpi2CmIpMulticastMapEntry ::= SEQUENCE {
docsBpi2CmIpMulticastIndex Unsigned32,
docsBpi2CmIpMulticastAddressType InetAddressType,
docsBpi2CmIpMulticastAddress InetAddress,
docsBpi2CmIpMulticastSAId DocsSAIdOrZero,
docsBpi2CmIpMulticastSAMapState INTEGER,
docsBpi2CmIpMulticastSAMapRequests Counter32,
docsBpi2CmIpMulticastSAMapReplies Counter32,
docsBpi2CmIpMulticastSAMapRejects Counter32,
docsBpi2CmIpMulticastSAMapRejectErrorCode INTEGER,
docsBpi2CmIpMulticastSAMapRejectErrorString SnmpAdminString
}
docsBpi2CmIpMulticastIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this row."
::= { docsBpi2CmIpMulticastMapEntry 1 }
docsBpi2CmIpMulticastAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Internet address for
docsBpi2CmIpMulticastAddress."
::= { docsBpi2CmIpMulticastMapEntry 2 }
docsBpi2CmIpMulticastAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the IP multicast address
to be mapped. The type of this address is determined by
the value of the docsBpi2CmIpMulticastAddressType object."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 5.4."
::= { docsBpi2CmIpMulticastMapEntry 3 }
docsBpi2CmIpMulticastSAId OBJECT-TYPE
SYNTAX DocsSAIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the SAID to which the IP
multicast address has been mapped. If no SA Map Reply has
been received for the IP address, this object should have
the value 0."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.12."
::= { docsBpi2CmIpMulticastMapEntry 4 }
docsBpi2CmIpMulticastSAMapState OBJECT-TYPE
SYNTAX INTEGER {
start(1),
mapWait(2),
mapped(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the state of the SA
Mapping FSM for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 5.3.1."
::= { docsBpi2CmIpMulticastMapEntry 5 }
docsBpi2CmIpMulticastSAMapRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CM has transmitted an SA Map Request message for this IP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.10."
::= { docsBpi2CmIpMulticastMapEntry 6 }
docsBpi2CmIpMulticastSAMapReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CM has received an SA Map Reply message for this IP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.11."
::= { docsBpi2CmIpMulticastMapEntry 7 }
docsBpi2CmIpMulticastSAMapRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CM has received an SA MAP Reject message for this IP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.12."
::= { docsBpi2CmIpMulticastMapEntry 8 }
docsBpi2CmIpMulticastSAMapRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
noAuthForRequestedDSFlow(9),
dsFlowNotMappedToSA(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent SA Map
Reject message sent in response to an SA Map Request for
This IP. It has the value none(1) if no SA MAP Reject
message has been received since entry creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.15."
::= { docsBpi2CmIpMulticastMapEntry 9 }
docsBpi2CmIpMulticastSAMapRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in
the most recent SA Map Reject message sent in response to
an SA Map Request for this IP. It is a zero length string
if no SA Map Reject message has been received since entry
creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.6."
::= { docsBpi2CmIpMulticastMapEntry 10 }
--
-- CM Cert Objects
--
docsBpi2CmCertObjects OBJECT IDENTIFIER
::= { docsBpi2CmObjects 4 }
--
-- CM Device Cert Table
--
docsBpi2CmDeviceCertTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmDeviceCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the Baseline Privacy Plus
device certificates for each CM MAC interface."
::= { docsBpi2CmCertObjects 1 }
docsBpi2CmDeviceCertEntry OBJECT-TYPE
SYNTAX DocsBpi2CmDeviceCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the device certificates of
one CM MAC interface. An entry in this table exists for
each ifEntry with an ifType of docsCableMaclayer(127)."
INDEX { ifIndex }
::= { docsBpi2CmDeviceCertTable 1 }
DocsBpi2CmDeviceCertEntry ::= SEQUENCE {
docsBpi2CmDeviceCmCert
DocsX509ASN1DEREncodedCertificate,
docsBpi2CmDeviceManufCert
DocsX509ASN1DEREncodedCertificate
}
docsBpi2CmDeviceCmCert OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The X509 DER-encoded cable modem certificate.
Note: This object can be set only when the value is the
zero-length OCTET STRING; otherwise, an error of
'inconsistentValue' is returned. Once the object
contains the certificate, its access MUST be read-only
and persists after re-initialization of the
managed system."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.1."
::= { docsBpi2CmDeviceCertEntry 1 }
docsBpi2CmDeviceManufCert OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The X509 DER-encoded manufacturer certificate that
signed the cable modem certificate."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.1."
::= { docsBpi2CmDeviceCertEntry 2 }
--
-- CM Crypto Suite Table
--
docsBpi2CmCryptoSuiteTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmCryptoSuiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the Baseline Privacy Plus
cryptographic suite capabilities for each CM MAC
interface."
::= { docsBpi2CmObjects 5 }
docsBpi2CmCryptoSuiteEntry OBJECT-TYPE
SYNTAX DocsBpi2CmCryptoSuiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a cryptographic suite pair
that this CM MAC supports."
INDEX { ifIndex, docsBpi2CmCryptoSuiteIndex }
::= { docsBpi2CmCryptoSuiteTable 1 }
DocsBpi2CmCryptoSuiteEntry ::= SEQUENCE {
docsBpi2CmCryptoSuiteIndex Unsigned32,
docsBpi2CmCryptoSuiteDataEncryptAlg
DocsBpkmDataEncryptAlg,
docsBpi2CmCryptoSuiteDataAuthentAlg
DocsBpkmDataAuthentAlg
}
docsBpi2CmCryptoSuiteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for a cryptographic suite row."
::= { docsBpi2CmCryptoSuiteEntry 1 }
docsBpi2CmCryptoSuiteDataEncryptAlg OBJECT-TYPE
SYNTAX DocsBpkmDataEncryptAlg
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm for this cryptographic suite capability."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmCryptoSuiteEntry 2 }
docsBpi2CmCryptoSuiteDataAuthentAlg OBJECT-TYPE
SYNTAX DocsBpkmDataAuthentAlg
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm for this cryptographic suite capability."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmCryptoSuiteEntry 3 }
-- Cable Modem Termination System Group
docsBpi2CmtsObjects OBJECT IDENTIFIER ::= { docsBpi2MIBObjects 2 }
--
-- SPECIAL NOTE: For the following CMTS tables, when a CM is
-- running in BPI mode, replace SAID (Security Association ID)
-- with SID (Service ID). The CMTS is required to map SAIDs and
-- SIDs to one contiguous space.
--
--
-- The BPI+ base table for CMTSs, indexed by ifIndex
--
docsBpi2CmtsBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the basic Baseline Privacy
attributes of each CMTS MAC interface."
::= { docsBpi2CmtsObjects 1 }
docsBpi2CmtsBaseEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one CMTS MAC interface. An entry in this table exists for
each ifEntry with an ifType of docsCableMaclayer(127)."
INDEX { ifIndex }
::= { docsBpi2CmtsBaseTable 1 }
DocsBpi2CmtsBaseEntry ::= SEQUENCE {
docsBpi2CmtsDefaultAuthLifetime Integer32,
docsBpi2CmtsDefaultTEKLifetime Integer32,
docsBpi2CmtsDefaultSelfSignedManufCertTrust INTEGER,
docsBpi2CmtsCheckCertValidityPeriods TruthValue,
docsBpi2CmtsAuthentInfos Counter32,
docsBpi2CmtsAuthRequests Counter32,
docsBpi2CmtsAuthReplies Counter32,
docsBpi2CmtsAuthRejects Counter32,
docsBpi2CmtsAuthInvalids Counter32,
docsBpi2CmtsSAMapRequests Counter32,
docsBpi2CmtsSAMapReplies Counter32,
docsBpi2CmtsSAMapRejects Counter32
}
docsBpi2CmtsDefaultAuthLifetime OBJECT-TYPE
SYNTAX Integer32 (1..6048000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the default lifetime, in
seconds, that the CMTS assigns to a new authorization key.
This object value persists after re-initialization of the
managed system."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.2."
DEFVAL { 604800 }
::= { docsBpi2CmtsBaseEntry 1 }
docsBpi2CmtsDefaultTEKLifetime OBJECT-TYPE
SYNTAX Integer32 (1..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the default lifetime, in
seconds, that the CMTS assigns to a new Traffic Encryption
Key (TEK).
This object value persists after re-initialization of the
managed system."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.2."
DEFVAL { 43200 }
::= { docsBpi2CmtsBaseEntry 2 }
docsBpi2CmtsDefaultSelfSignedManufCertTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted (1),
untrusted (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines the default trust of
self-signed manufacturer certificate entries, contained
in docsBpi2CmtsCACertTable, and created after this
object is set.
This object need not persist after re-initialization
of the managed system."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1"
::= { docsBpi2CmtsBaseEntry 3 }
docsBpi2CmtsCheckCertValidityPeriods OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'true' causes all chained and
root certificates in the chain to have their validity
periods checked against the current time of day, when
the CMTS receives an Authorization Request from the
CM.
A 'false' setting causes all certificates in the chain
not to have their validity periods checked against the
current time of day.
This object need not persist after re-initialization
of the managed system."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.2"
::= { docsBpi2CmtsBaseEntry 4 }
docsBpi2CmtsAuthentInfos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received an Authentication Information message
from any CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.9."
::= { docsBpi2CmtsBaseEntry 5 }
docsBpi2CmtsAuthRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received an Authorization Request message from any
CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.1."
::= { docsBpi2CmtsBaseEntry 6 }
docsBpi2CmtsAuthReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an Authorization Reply message to any
CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2."
::= { docsBpi2CmtsBaseEntry 7 }
docsBpi2CmtsAuthRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an Authorization Reject message to any
CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.3."
::= { docsBpi2CmtsBaseEntry 8 }
docsBpi2CmtsAuthInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times
the CMTS has transmitted an Authorization Invalid message
to any CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.7."
::= { docsBpi2CmtsBaseEntry 9 }
docsBpi2CmtsSAMapRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received an SA Map Request message from any CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.10."
::= { docsBpi2CmtsBaseEntry 10 }
docsBpi2CmtsSAMapReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an SA Map Reply message to any CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.11."
::= { docsBpi2CmtsBaseEntry 11 }
docsBpi2CmtsSAMapRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an SA Map Reject message to any CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.12."
::= { docsBpi2CmtsBaseEntry 12 }
--
-- The CMTS Authorization Table, indexed by ifIndex and CM MAC
-- address
--
docsBpi2CmtsAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of each CM
authorization association. The CMTS maintains one
authorization association with each Baseline Privacy-
enabled CM, registered on each CMTS MAC interface,
regardless of whether the CM is authorized or rejected."
::= { docsBpi2CmtsObjects 2 }
docsBpi2CmtsAuthEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one authorization association. The CMTS MUST create one
entry per CM per MAC interface, based on the receipt of an
Authorization Request message, and MUST not delete the
entry until the CM loses registration."
INDEX { ifIndex, docsBpi2CmtsAuthCmMacAddress }
::= { docsBpi2CmtsAuthTable 1 }
DocsBpi2CmtsAuthEntry ::= SEQUENCE {
docsBpi2CmtsAuthCmMacAddress MacAddress,
docsBpi2CmtsAuthCmBpiVersion INTEGER,
docsBpi2CmtsAuthCmPublicKey OCTET STRING,
docsBpi2CmtsAuthCmKeySequenceNumber Integer32,
docsBpi2CmtsAuthCmExpiresOld DateAndTime,
docsBpi2CmtsAuthCmExpiresNew DateAndTime,
docsBpi2CmtsAuthCmLifetime Integer32,
docsBpi2CmtsAuthCmReset INTEGER,
docsBpi2CmtsAuthCmInfos Counter32,
docsBpi2CmtsAuthCmRequests Counter32,
docsBpi2CmtsAuthCmReplies Counter32,
docsBpi2CmtsAuthCmRejects Counter32,
docsBpi2CmtsAuthCmInvalids Counter32,
docsBpi2CmtsAuthRejectErrorCode INTEGER,
docsBpi2CmtsAuthRejectErrorString SnmpAdminString,
docsBpi2CmtsAuthInvalidErrorCode INTEGER,
docsBpi2CmtsAuthInvalidErrorString SnmpAdminString,
docsBpi2CmtsAuthPrimarySAId DocsSAIdOrZero,
docsBpi2CmtsAuthBpkmCmCertValid INTEGER,
docsBpi2CmtsAuthBpkmCmCert
DocsX509ASN1DEREncodedCertificate,
docsBpi2CmtsAuthCACertIndexPtr Unsigned32
}
docsBpi2CmtsAuthCmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is the physical address of
the CM to which the authorization association applies."
::= { docsBpi2CmtsAuthEntry 1 }
docsBpi2CmtsAuthCmBpiVersion OBJECT-TYPE
SYNTAX INTEGER {
bpi (0),
bpiPlus (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the version of Baseline
Privacy for which this CM has registered. The value
'bpiplus' represents the value of BPI-Version Attribute of
the Baseline Privacy Key Management BPKM attribute
BPI-Version (1). The value 'bpi' is used to represent the
CM registered using DOCSIS 1.0 Baseline Privacy."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.22; ANSI/SCTE 22-2 2002(formerly DSS 02-03)
Data-Over-Cable Service Interface Specification DOCSIS 1.0
Baseline Privacy Interface (BPI)"
::= { docsBpi2CmtsAuthEntry 2 }
docsBpi2CmtsAuthCmPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..524))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is a DER-encoded
RSAPublicKey ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1), corresponding to the
public key of the CM. This is the zero-length OCTET
STRING if the CMTS does not retain the public key."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.4."
::= { docsBpi2CmtsAuthEntry 3 }
docsBpi2CmtsAuthCmKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent
authorization key sequence number for this CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.10."
::= { docsBpi2CmtsAuthEntry 4 }
docsBpi2CmtsAuthCmExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the immediate predecessor of the most
recent authorization key for this FSM. If this FSM has only
one authorization key, then the value is the time of
activation of this FSM.
Note: This object has no meaning for CMs running in BPI
mode; therefore, this object is not instantiated for entries
associated to those CMs."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmtsAuthEntry 5 }
docsBpi2CmtsAuthCmExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock
time for expiration of the most recent authorization key
for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmtsAuthEntry 6 }
docsBpi2CmtsAuthCmLifetime OBJECT-TYPE
SYNTAX Integer32 (1..6048000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the lifetime, in seconds,
that the CMTS assigns to an authorization key for this CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2 and Appendix A.2."
::= { docsBpi2CmtsAuthEntry 7 }
docsBpi2CmtsAuthCmReset OBJECT-TYPE
SYNTAX INTEGER {
noResetRequested(1),
invalidateAuth(2),
sendAuthInvalid(3),
invalidateTeks(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to invalidateAuth(2) causes the
CMTS to invalidate the current CM authorization key(s), but
not to transmit an Authorization Invalid message nor to
invalidate the primary SAID's TEKs. Setting this object to
sendAuthInvalid(3) causes the CMTS to invalidate the
current CM authorization key(s), and to transmit an
Authorization Invalid message to the CM, but not to
invalidate the primary SAID's TEKs. Setting this object to
invalidateTeks(4) causes the CMTS to invalidate the current
CM authorization key(s), to transmit an Authorization
Invalid message to the CM, and to invalidate the TEKs
associated with this CM's primary SAID.
For BPI mode, substitute all of the CM's unicast
TEKs for the primary SAID's TEKs in the previous
paragraph.
Reading this object returns the most recently set
value of this object or, if the object has not been set
since entry creation, returns noResetRequested(1)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.3.4, 4.1.2.3.5, and 4.1.3.3.5."
::= { docsBpi2CmtsAuthEntry 8 }
docsBpi2CmtsAuthCmInfos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received an Authentication Information message
from this CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.9."
::= { docsBpi2CmtsAuthEntry 9 }
docsBpi2CmtsAuthCmRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received an Authorization Request message from
this CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.1."
::= { docsBpi2CmtsAuthEntry 10 }
docsBpi2CmtsAuthCmReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an Authorization Reply message to this
CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2."
::= { docsBpi2CmtsAuthEntry 11 }
docsBpi2CmtsAuthCmRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an Authorization Reject message to
this CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.3."
::= { docsBpi2CmtsAuthEntry 12 }
docsBpi2CmtsAuthCmInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an Authorization Invalid message to
this CM.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.7."
::= { docsBpi2CmtsAuthEntry 13 }
docsBpi2CmtsAuthRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unauthorizedSaid(4),
permanentAuthorizationFailure(8),
timeOfDayNotAcquired(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent
Authorization Reject message transmitted to the CM. This has
the value unknown(2) if the last Error-Code value was 0 and
none(1) if no Authorization Reject message has been
transmitted to the CM since entry creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.15."
::= { docsBpi2CmtsAuthEntry 14 }
docsBpi2CmtsAuthRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in the
most recent Authorization Reject message transmitted to the
CM. This is a zero length string if no Authorization
Reject message has been transmitted to the CM since entry
creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.6."
::= { docsBpi2CmtsAuthEntry 15 }
docsBpi2CmtsAuthInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unsolicited(5),
invalidKeySequence(6),
keyRequestAuthenticationFailure(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent
Authorization Invalid message transmitted to the CM. This
has the value unknown(2) if the last Error-Code value was 0
and none(1) if no Authorization Invalid message has been
transmitted to the CM since entry creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.15."
::= { docsBpi2CmtsAuthEntry 16 }
docsBpi2CmtsAuthInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in the
most recent Authorization Invalid message transmitted to
the CM. This is a zero length string if no Authorization
Invalid message has been transmitted to the CM since entry
creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.6."
::= { docsBpi2CmtsAuthEntry 17 }
docsBpi2CmtsAuthPrimarySAId OBJECT-TYPE
SYNTAX DocsSAIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Primary Security
Association identifier. For BPI mode, the value must be
any unicast SID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmtsAuthEntry 18 }
docsBpi2CmtsAuthBpkmCmCertValid OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
validCmChained (1),
validCmTrusted (2),
invalidCmUntrusted (3),
invalidCAUntrusted (4),
invalidCmOther (5),
invalidCAOther (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the reason why a CM's certificate is deemed
valid or invalid.
Return unknown(0) if the CM is running BPI mode.
ValidCmChained(1) means the certificate is valid
because it chains to a valid certificate.
ValidCmTrusted(2) means the certificate is valid
because it has been provisioned (in the
docsBpi2CmtsProvisionedCmCert table) to be trusted.
InvalidCmUntrusted(3) means the certificate is invalid
because it has been provisioned (in the
docsBpi2CmtsProvisionedCmCert table) to be untrusted.
InvalidCAUntrusted(4) means the certificate is invalid
because it chains to an untrusted certificate.
InvalidCmOther(5) and InvalidCAOther(6) refer to
errors in parsing, validity periods, etc., which are
attributable to the CM certificate or its chain,
respectively; additional information may be found
in docsBpi2AuthRejectErrorString for these types
of errors."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.2."
::= { docsBpi2CmtsAuthEntry 19 }
docsBpi2CmtsAuthBpkmCmCert OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The X509 CM Certificate sent as part of a BPKM
Authorization Request.
Note: The zero-length OCTET STRING must be returned if the
Entire certificate is not retained in the CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsAuthEntry 20 }
docsBpi2CmtsAuthCACertIndexPtr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A row index into docsBpi2CmtsCACertTable.
Returns the index in docsBpi2CmtsCACertTable to which
CA certificate this CM is chained to. A value of
0 means it could not be found or not applicable."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsAuthEntry 21 }
--
-- The CMTS TEK Table, indexed by ifIndex and SAID
--
docsBpi2CmtsTEKTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of each
Traffic Encryption Key (TEK) association. The CMTS
Maintains one TEK association per SAID on each CMTS MAC
interface."
::= { docsBpi2CmtsObjects 3 }
docsBpi2CmtsTEKEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one TEK association on a particular CMTS MAC interface. The
CMTS MUST create one entry per SAID per MAC interface,
based on the receipt of a Key Request message, and MUST not
delete the entry before the CM authorization for the SAID
permanently expires."
INDEX { ifIndex, docsBpi2CmtsTEKSAId }
::= { docsBpi2CmtsTEKTable 1 }
DocsBpi2CmtsTEKEntry ::= SEQUENCE {
docsBpi2CmtsTEKSAId DocsSAId,
docsBpi2CmtsTEKSAType DocsBpkmSAType,
docsBpi2CmtsTEKDataEncryptAlg DocsBpkmDataEncryptAlg,
docsBpi2CmtsTEKDataAuthentAlg DocsBpkmDataAuthentAlg,
docsBpi2CmtsTEKLifetime Integer32,
docsBpi2CmtsTEKKeySequenceNumber Integer32,
docsBpi2CmtsTEKExpiresOld DateAndTime,
docsBpi2CmtsTEKExpiresNew DateAndTime,
docsBpi2CmtsTEKReset TruthValue,
docsBpi2CmtsKeyRequests Counter32,
docsBpi2CmtsKeyReplies Counter32,
docsBpi2CmtsKeyRejects Counter32,
docsBpi2CmtsTEKInvalids Counter32,
docsBpi2CmtsKeyRejectErrorCode INTEGER,
docsBpi2CmtsKeyRejectErrorString SnmpAdminString,
docsBpi2CmtsTEKInvalidErrorCode INTEGER,
docsBpi2CmtsTEKInvalidErrorString SnmpAdminString
}
docsBpi2CmtsTEKSAId OBJECT-TYPE
SYNTAX DocsSAId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is the DOCSIS Security
Association ID (SAID)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.12."
::= { docsBpi2CmtsTEKEntry 1 }
docsBpi2CmtsTEKSAType OBJECT-TYPE
SYNTAX DocsBpkmSAType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the type of security
association. 'dynamic' does not apply to CMs running in
BPI mode. Unicast BPI TEKs must utilize the 'primary'
encoding, and multicast BPI TEKs must utilize the 'static'
encoding."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmtsTEKEntry 2 }
docsBpi2CmtsTEKDataEncryptAlg OBJECT-TYPE
SYNTAX DocsBpkmDataEncryptAlg
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm for this SAID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmtsTEKEntry 3 }
docsBpi2CmtsTEKDataAuthentAlg OBJECT-TYPE
SYNTAX DocsBpkmDataAuthentAlg
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm for this SAID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmtsTEKEntry 4 }
docsBpi2CmtsTEKLifetime OBJECT-TYPE
SYNTAX Integer32 (1..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the lifetime, in
seconds, that the CMTS assigns to keys for this TEK
association."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.5 and Appendix A.2."
::= { docsBpi2CmtsTEKEntry 5 }
docsBpi2CmtsTEKKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent TEK
key sequence number for this SAID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.2.10 and 4.2.2.13."
::= { docsBpi2CmtsTEKEntry 6 }
docsBpi2CmtsTEKExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the immediate predecessor of the most
recent TEK for this FSM. If this FSM has only one TEK, then
the value is the time of activation of this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmtsTEKEntry 7 }
docsBpi2CmtsTEKExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the most recent TEK for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmtsTEKEntry 8 }
docsBpi2CmtsTEKReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'true' causes the CMTS to
invalidate all currently active TEKs and to generate new
TEKs for the associated SAID; the CMTS MAY also generate
unsolicited TEK Invalid messages, to optimize the TEK
synchronization between the CMTS and the CM(s). Reading
this object always returns FALSE."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.3.3.5."
::= { docsBpi2CmtsTEKEntry 9 }
docsBpi2CmtsKeyRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received a Key Request message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.4."
::= { docsBpi2CmtsTEKEntry 10 }
docsBpi2CmtsKeyReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted a Key Reply message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.5."
::= { docsBpi2CmtsTEKEntry 11 }
docsBpi2CmtsKeyRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted a Key Reject message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.6."
::= { docsBpi2CmtsTEKEntry 12 }
docsBpi2CmtsTEKInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted a TEK Invalid message.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.8."
::= { docsBpi2CmtsTEKEntry 13 }
docsBpi2CmtsKeyRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedSaid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent Key Reject
message sent in response to a Key Request for this SAID.
This has the value unknown(2) if the last Error-Code value
was 0 and none(1) if no Key Reject message has been
received since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.6 and 4.2.2.15."
::= { docsBpi2CmtsTEKEntry 14 }
docsBpi2CmtsKeyRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in
the most recent Key Reject message sent in response to a
Key Request for this SAID. This is a zero length string if
no Key Reject message has been received since
registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.6 and 4.2.2.6."
::= { docsBpi2CmtsTEKEntry 15 }
docsBpi2CmtsTEKInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
invalidKeySequence(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent TEK
Invalid message sent in association with this SAID. This
has the value unknown(2) if the last Error-Code value was 0
and none(1) if no TEK Invalid message has been received
since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.8 and 4.2.2.15."
::= { docsBpi2CmtsTEKEntry 16 }
docsBpi2CmtsTEKInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in
the most recent TEK Invalid message sent in association
with this SAID. This is a zero length string if no TEK
Invalid message has been received since registration."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.8 and 4.2.2.6."
::= { docsBpi2CmtsTEKEntry 17 }
--
-- The CMTS Multicast Objects Group
--
docsBpi2CmtsMulticastObjects OBJECT IDENTIFIER
::= { docsBpi2CmtsObjects 4 }
--
-- The CMTS IP Multicast Mapping Table, indexed by
-- docsBpi2CmtsIpMulticastIndex, and by ifIndex
--
docsBpi2CmtsIpMulticastMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps multicast IP addresses to SAIDs.
If a multicast IP address is mapped by multiple rows
in the table, the row with the lowest
docsBpi2CmtsIpMulticastIndex must be utilized for the
mapping."
::= { docsBpi2CmtsMulticastObjects 1 }
docsBpi2CmtsIpMulticastMapEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the mapping of
a set of multicast IP address and the mask to one SAID
associated to a CMTS MAC Interface, as well as associated
message counters and error information."
INDEX { ifIndex, docsBpi2CmtsIpMulticastIndex }
::= { docsBpi2CmtsIpMulticastMapTable 1 }
DocsBpi2CmtsIpMulticastMapEntry ::= SEQUENCE {
docsBpi2CmtsIpMulticastIndex Unsigned32,
docsBpi2CmtsIpMulticastAddressType InetAddressType,
docsBpi2CmtsIpMulticastAddress InetAddress,
docsBpi2CmtsIpMulticastMask InetAddress,
docsBpi2CmtsIpMulticastSAId DocsSAIdOrZero,
docsBpi2CmtsIpMulticastSAType DocsBpkmSAType,
docsBpi2CmtsIpMulticastDataEncryptAlg
DocsBpkmDataEncryptAlg,
docsBpi2CmtsIpMulticastDataAuthentAlg
DocsBpkmDataAuthentAlg,
docsBpi2CmtsIpMulticastSAMapRequests Counter32,
docsBpi2CmtsIpMulticastSAMapReplies Counter32,
docsBpi2CmtsIpMulticastSAMapRejects Counter32,
docsBpi2CmtsIpMulticastSAMapRejectErrorCode
INTEGER,
docsBpi2CmtsIpMulticastSAMapRejectErrorString
SnmpAdminString,
docsBpi2CmtsIpMulticastMapControl RowStatus,
docsBpi2CmtsIpMulticastMapStorageType StorageType
}
docsBpi2CmtsIpMulticastIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this row. Conceptual rows having the
value 'permanent' need not allow write-access to any
columnar objects in the row."
::= { docsBpi2CmtsIpMulticastMapEntry 1 }
docsBpi2CmtsIpMulticastAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of Internet address for
docsBpi2CmtsIpMulticastAddress
and docsBpi2CmtsIpMulticastMask."
DEFVAL { ipv4 }
::= { docsBpi2CmtsIpMulticastMapEntry 2 }
docsBpi2CmtsIpMulticastAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the IP multicast address
to be mapped, in conjunction with
docsBpi2CmtsIpMulticastMask. The type of this address is
determined by the value of the object
docsBpi2CmtsIpMulticastAddressType."
::= { docsBpi2CmtsIpMulticastMapEntry 3 }
docsBpi2CmtsIpMulticastMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the IP multicast address mask
for this row.
An IP multicast address matches this row if the logical
AND of the address with docsBpi2CmtsIpMulticastMask is
identical to the logical AND of
docsBpi2CmtsIpMulticastAddr with
docsBpi2CmtsIpMulticastMask. The type of this address is
determined by the value of the object
docsBpi2CmtsIpMulticastAddressType.
Note: For IPv6, this object need not represent a
contiguous netmask; e.g., to associate a SAID to a
multicast group matching 'any' multicast scope. The TC
InetAddressPrefixLength is not used, as it only
represents contiguous netmask."
::= { docsBpi2CmtsIpMulticastMapEntry 4 }
docsBpi2CmtsIpMulticastSAId OBJECT-TYPE
SYNTAX DocsSAIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the multicast SAID to be
used in this IP multicast address mapping entry."
::= { docsBpi2CmtsIpMulticastMapEntry 5 }
docsBpi2CmtsIpMulticastSAType OBJECT-TYPE
SYNTAX DocsBpkmSAType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is the type of security
association. 'dynamic' does not apply to CMs running in
BPI mode. Unicast BPI TEKs must utilize the 'primary'
encoding, and multicast BPI TEKs must utilize the 'static'
encoding. By default, SNMP created entries set this object
to 'static' if not set at row creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmtsIpMulticastMapEntry 6 }
docsBpi2CmtsIpMulticastDataEncryptAlg OBJECT-TYPE
SYNTAX DocsBpkmDataEncryptAlg
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
DEFVAL { des56CbcMode }
::= { docsBpi2CmtsIpMulticastMapEntry 7 }
docsBpi2CmtsIpMulticastDataAuthentAlg OBJECT-TYPE
SYNTAX DocsBpkmDataAuthentAlg
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
DEFVAL { none }
::= { docsBpi2CmtsIpMulticastMapEntry 8 }
docsBpi2CmtsIpMulticastSAMapRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has received an SA Map Request message for this IP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.10."
::= { docsBpi2CmtsIpMulticastMapEntry 9 }
docsBpi2CmtsIpMulticastSAMapReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an SA Map Reply message for this IP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.11."
::= { docsBpi2CmtsIpMulticastMapEntry 10 }
docsBpi2CmtsIpMulticastSAMapRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the number of times the
CMTS has transmitted an SA Map Reject message for this IP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.12."
::= { docsBpi2CmtsIpMulticastMapEntry 11 }
docsBpi2CmtsIpMulticastSAMapRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
noAuthForRequestedDSFlow(9),
dsFlowNotMappedToSA(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent SA Map
Reject message sent in response to an SA Map Request for
this IP. It has the value unknown(2) if the last Error-Code
Value was 0 and none(1) if no SA MAP Reject message has
been received since entry creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.15."
::= { docsBpi2CmtsIpMulticastMapEntry 12 }
docsBpi2CmtsIpMulticastSAMapRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the text string in
the most recent SA Map Reject message sent in response to
an SA Map Request for this IP. It is a zero length string
if no SA Map Reject message has been received since entry
creation."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.6."
::= { docsBpi2CmtsIpMulticastMapEntry 13 }
docsBpi2CmtsIpMulticastMapControl OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls and reflects the IP multicast
address mapping entry. There is no restriction on the
ability to change values in this row while the row is
active.
A created row can be set to active only after the
Corresponding instances of docsBpi2CmtsIpMulticastAddress,
docsBpi2CmtsIpMulticastMask, docsBpi2CmtsIpMulticastSAId,
and docsBpi2CmtsIpMulticastSAType have all been set."
::= { docsBpi2CmtsIpMulticastMapEntry 14 }
docsBpi2CmtsIpMulticastMapStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar objects in the row."
::= { docsBpi2CmtsIpMulticastMapEntry 15 }
--
-- The CMTS Multicast SAID Authorization Table,
-- indexed by ifIndex by
-- multicast SAID by CM MAC address
--
docsBpi2CmtsMulticastAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsMulticastAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the multicast SAID
authorization for each CM on each CMTS MAC interface."
::= { docsBpi2CmtsMulticastObjects 2 }
docsBpi2CmtsMulticastAuthEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsMulticastAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the key
authorization of one cable modem for one multicast SAID
for one CMTS MAC interface.
Row entries persist after re-initialization of
the managed system."
INDEX { ifIndex, docsBpi2CmtsMulticastAuthSAId,
docsBpi2CmtsMulticastAuthCmMacAddress }
::= { docsBpi2CmtsMulticastAuthTable 1 }
DocsBpi2CmtsMulticastAuthEntry ::= SEQUENCE
{
docsBpi2CmtsMulticastAuthSAId DocsSAId,
docsBpi2CmtsMulticastAuthCmMacAddress MacAddress,
docsBpi2CmtsMulticastAuthControl RowStatus
}
docsBpi2CmtsMulticastAuthSAId OBJECT-TYPE
SYNTAX DocsSAId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the multicast SAID for
authorization."
::= { docsBpi2CmtsMulticastAuthEntry 1 }
docsBpi2CmtsMulticastAuthCmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the MAC address of the CM
to which the multicast SAID authorization applies."
::= { docsBpi2CmtsMulticastAuthEntry 2 }
docsBpi2CmtsMulticastAuthControl OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row for the
authorization of multicast SAIDs to CMs."
::= { docsBpi2CmtsMulticastAuthEntry 3 }
--
-- CMTS Cert Objects
--
docsBpi2CmtsCertObjects OBJECT IDENTIFIER
::= { docsBpi2CmtsObjects 5 }
--
-- CMTS Provisioned CM Cert Table
--
docsBpi2CmtsProvisionedCmCertTable OBJECT-TYPE
SYNTAX SEQUENCE OF
DocsBpi2CmtsProvisionedCmCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of CM certificate trust entries provisioned
to the CMTS. The trust object for a certificate in this
table has an overriding effect on the validity object of a
certificate in the authorization table, as long as the
entire contents of the two certificates are identical."
::= { docsBpi2CmtsCertObjects 1 }
docsBpi2CmtsProvisionedCmCertEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsProvisionedCmCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the CMTS's provisioned CM certificate
table. Row entries persist after re-initialization of
the managed system."
REFERENCE
"Data-Over-Cable Service Interface Specifications:
Operations Support System Interface Specification
SP-OSSIv2.0-I05-040407, Section 6.2.14"
INDEX { docsBpi2CmtsProvisionedCmCertMacAddress }
::= { docsBpi2CmtsProvisionedCmCertTable 1 }
DocsBpi2CmtsProvisionedCmCertEntry ::= SEQUENCE
{
docsBpi2CmtsProvisionedCmCertMacAddress MacAddress,
docsBpi2CmtsProvisionedCmCertTrust INTEGER,
docsBpi2CmtsProvisionedCmCertSource INTEGER,
docsBpi2CmtsProvisionedCmCertStatus RowStatus,
docsBpi2CmtsProvisionedCmCert
DocsX509ASN1DEREncodedCertificate
}
docsBpi2CmtsProvisionedCmCertMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this row."
::= { docsBpi2CmtsProvisionedCmCertEntry 1 }
docsBpi2CmtsProvisionedCmCertTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted(1),
untrusted(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trust state for the provisioned CM certificate entry.
Note: Setting this object need only override the validity
of CM certificates sent in future authorization requests;
instantaneous effect need not occur."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1."
DEFVAL { untrusted }
::= { docsBpi2CmtsProvisionedCmCertEntry 2 }
docsBpi2CmtsProvisionedCmCertSource OBJECT-TYPE
SYNTAX INTEGER {
snmp(1),
configurationFile(2),
externalDatabase(3),
other(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the certificate reached the
CMTS. Other(4) means that it originated from a source not
identified above."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1."
::= { docsBpi2CmtsProvisionedCmCertEntry 3 }
docsBpi2CmtsProvisionedCmCertStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Values in this row
cannot be changed while the row is 'active'."
::= { docsBpi2CmtsProvisionedCmCertEntry 4 }
docsBpi2CmtsProvisionedCmCert OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An X509 DER-encoded Certificate Authority
certificate.
Note: The zero-length OCTET STRING must be returned, on
reads, if the entire certificate is not retained in the
CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsProvisionedCmCertEntry 5 }
--
-- CMTS CA Cert Table
--
docsBpi2CmtsCACertTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsCACertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of known Certificate Authority certificates
acquired by this device."
::= { docsBpi2CmtsCertObjects 2 }
docsBpi2CmtsCACertEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsCACertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Certificate Authority certificate
table. Row entries with the trust status 'trusted',
'untrusted', or 'root' persist after re-initialization
of the managed system."
REFERENCE
"Data-Over-Cable Service Interface Specifications:
Operations Support System Interface Specification
SP-OSSIv2.0-I05-040407, Section 6.2.14"
INDEX { docsBpi2CmtsCACertIndex }
::= {docsBpi2CmtsCACertTable 1 }
DocsBpi2CmtsCACertEntry ::= SEQUENCE {
docsBpi2CmtsCACertIndex Unsigned32,
docsBpi2CmtsCACertSubject SnmpAdminString,
docsBpi2CmtsCACertIssuer SnmpAdminString,
docsBpi2CmtsCACertSerialNumber OCTET STRING,
docsBpi2CmtsCACertTrust INTEGER,
docsBpi2CmtsCACertSource INTEGER,
docsBpi2CmtsCACertStatus RowStatus,
docsBpi2CmtsCACert
DocsX509ASN1DEREncodedCertificate,
docsBpi2CmtsCACertThumbprint OCTET STRING
}
docsBpi2CmtsCACertIndex OBJECT-TYPE
SYNTAX Unsigned32 (1.. 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this row."
::= { docsBpi2CmtsCACertEntry 1 }
docsBpi2CmtsCACertSubject OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subject name exactly as it is encoded in the
X509 certificate.
The organizationName portion of the certificate's subject
name must be present. All other fields are optional. Any
optional field present must be prepended with <CR>
(carriage return, U+000D) <LF> (line feed, U+000A).
Ordering of fields present must conform to the following:
organizationName <CR> <LF>
countryName <CR> <LF>
stateOrProvinceName <CR> <LF>
localityName <CR> <LF>
organizationalUnitName <CR> <LF>
organizationalUnitName=<Manufacturing Location> <CR> <LF>
commonName"
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2.4"
::= { docsBpi2CmtsCACertEntry 2 }
docsBpi2CmtsCACertIssuer OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The issuer name exactly as it is encoded in the
X509 certificate.
The commonName portion of the certificate's issuer
name must be present. All other fields are optional. Any
optional field present must be prepended with <CR>
(carriage return, U+000D) <LF> (line feed, U+000A).
Ordering of fields present must conform to the following:
CommonName <CR><LF>
countryName <CR><LF>
stateOrProvinceName <CR><LF>
localityName <CR><LF>
organizationName <CR><LF>
organizationalUnitName <CR><LF>
organizationalUnitName=<Manufacturing Location>"
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2.4"
::= { docsBpi2CmtsCACertEntry 3 }
docsBpi2CmtsCACertSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This CA certificate's serial number, represented as
an octet string."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2.2"
::= { docsBpi2CmtsCACertEntry 4 }
docsBpi2CmtsCACertTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted (1),
untrusted (2),
chained (3),
root (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the trust status of this
certificate. Root certificates must be given root(4)
trust; manufacturer certificates must not be given root(4)
trust. Trust on root certificates must not change.
Note: Setting this object need only affect the validity of
CM certificates sent in future authorization requests;
instantaneous effect need not occur."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1"
DEFVAL { chained }
::= { docsBpi2CmtsCACertEntry 5 }
docsBpi2CmtsCACertSource OBJECT-TYPE
SYNTAX INTEGER {
snmp (1),
configurationFile (2),
externalDatabase (3),
other (4),
authentInfo (5),
compiledIntoCode (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the certificate reached
the CMTS. Other(4) means that it originated from a source
not identified above."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1"
::= { docsBpi2CmtsCACertEntry 6 }
docsBpi2CmtsCACertStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. An attempt
to set writable columnar values while this row is active
behaves as follows:
- Sets to the object docsBpi2CmtsCACertTrust are allowed.
- Sets to the object docsBpi2CmtsCACert will return an
error of 'inconsistentValue'.
A newly created entry cannot be set to active until the
value of docsBpi2CmtsCACert is being set."
::= { docsBpi2CmtsCACertEntry 7 }
docsBpi2CmtsCACert OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An X509 DER-encoded Certificate Authority
certificate.
To help identify certificates, either this object or
docsBpi2CmtsCACertThumbprint must be returned by a CMTS for
self-signed CA certificates.
Note: The zero-length OCTET STRING must be returned, on
reads, if the entire certificate is not retained in the
CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsCACertEntry 8 }
docsBpi2CmtsCACertThumbprint OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SHA-1 hash of a CA certificate.
To help identify certificates, either this object or
docsBpi2CmtsCACert must be returned by a CMTS for
self-signed CA certificates.
Note: The zero-length OCTET STRING must be returned, on
reads, if the CA certificate thumb print is not retained
in the CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.3"
::= { docsBpi2CmtsCACertEntry 9 }
--
-- Authenticated Software Download Objects
--
--
-- Note: the authenticated software download objects are a
-- CM requirement only.
--
docsBpi2CodeDownloadControl OBJECT IDENTIFIER
::= { docsBpi2MIBObjects 4 }
docsBpi2CodeDownloadStatusCode OBJECT-TYPE
SYNTAX INTEGER {
configFileCvcVerified (1),
configFileCvcRejected (2),
snmpCvcVerified (3),
snmpCvcRejected (4),
codeFileVerified (5),
codeFileRejected (6),
other (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value indicates the result of the latest config
file CVC verification, SNMP CVC verification, or code file
verification."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections D.3.3.2 and D.3.5.1."
::= { docsBpi2CodeDownloadControl 1 }
docsBpi2CodeDownloadStatusString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the additional
information to the status code. The value will include
the error code and error description, which will be defined
separately."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.7"
::= { docsBpi2CodeDownloadControl 2 }
docsBpi2CodeMfgOrgName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the device manufacturer's
organizationName."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 3 }
docsBpi2CodeMfgCodeAccessStart OBJECT-TYPE
SYNTAX DateAndTime (SIZE(11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the device manufacturer's
current codeAccessStart value. This value will always
refer to Greenwich Mean Time (GMT), and the value
format must contain TimeZone information (fields 8-10)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 4 }
docsBpi2CodeMfgCvcAccessStart OBJECT-TYPE
SYNTAX DateAndTime (SIZE(11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the device manufacturer's
current cvcAccessStart value. This value will always
refer to Greenwich Mean Time (GMT), and the value
format must contain TimeZone information (fields 8-10)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 5 }
docsBpi2CodeCoSignerOrgName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the co-signer's
organizationName. The value is a zero length string if
the co-signer is not specified."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 6 }
docsBpi2CodeCoSignerCodeAccessStart OBJECT-TYPE
SYNTAX DateAndTime (SIZE(11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the co-signer's current
codeAccessStart value. This value will always refer to
Greenwich Mean Time (GMT), and the value format must contain
TimeZone information (fields 8-10).
If docsBpi2CodeCoSignerOrgName is a zero
length string, the value of this object is meaningless."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 7 }
docsBpi2CodeCoSignerCvcAccessStart OBJECT-TYPE
SYNTAX DateAndTime (SIZE(11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the co-signer's current
cvcAccessStart value. This value will always refer to
Greenwich Mean Time (GMT), and the value format must contain
TimeZone information (fields 8-10).
If docsBpi2CodeCoSignerOrgName is a zero
length string, the value of this object is meaningless."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 8 }
docsBpi2CodeCvcUpdate OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting a CVC to this object triggers the device
to verify the CVC and update the cvcAccessStart values.
The content of this object is then discarded.
If the device is not enabled to upgrade codefiles, or if
the CVC verification fails, the CVC will be rejected.
Reading this object always returns the zero-length OCTET
STRING."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.3.2.2."
::= { docsBpi2CodeDownloadControl 9 }
--
-- The BPI+ MIB Conformance Statements (with a placeholder for
-- notifications)
--
docsBpi2Notification OBJECT IDENTIFIER
::= { docsBpi2MIB 0 }
docsBpi2Conformance OBJECT IDENTIFIER
::= { docsBpi2MIB 2 }
docsBpi2Compliances OBJECT IDENTIFIER
::= { docsBpi2Conformance 1 }
docsBpi2Groups OBJECT IDENTIFIER
::= { docsBpi2Conformance 2 }
docsBpi2CmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"This is the compliance statement for CMs that
implement the DOCSIS Baseline Privacy Interface Plus."
MODULE -- docsBpi2MIB
-- unconditionally mandatory group
MANDATORY-GROUPS {
docsBpi2CmGroup,
docsBpi2CodeDownloadGroup
}
-- constrain on Encryption algorithms
OBJECT docsBpi2CmTEKDataEncryptAlg
SYNTAX DocsBpkmDataEncryptAlg {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
DESCRIPTION
"It is compliant to support des56CbcMode(1) and
des40CbcMode(2) for data encryption algorithms."
-- constrain on Integrity algorithms
OBJECT docsBpi2CmTEKDataAuthentAlg
SYNTAX DocsBpkmDataAuthentAlg {
none(0)
}
DESCRIPTION
"It is compliant to not support data message
authentication algorithms."
-- constrain on IP addressing
OBJECT docsBpi2CmIpMulticastAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Support for other address types may be defined
in future versions of this MIB module."
-- constrain on IP addressing
OBJECT docsBpi2CmIpMulticastAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses Other address types support may be defined in
future versions of this MIB module."
-- constrain on Encryption algorithms
OBJECT docsBpi2CmCryptoSuiteDataEncryptAlg
SYNTAX DocsBpkmDataEncryptAlg {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
DESCRIPTION
"It is compliant to only support des56CbcMode(1)
and des40CbcMode(2) for data encryption algorithms."
-- constrain on Integrity algorithms
OBJECT docsBpi2CmCryptoSuiteDataAuthentAlg
SYNTAX DocsBpkmDataAuthentAlg {
none(0)
}
DESCRIPTION
"It is compliant to not support data message
authentication algorithms."
::= { docsBpi2Compliances 1 }
docsBpi2CmtsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"This is the compliance statement for CMTSs that
implement the DOCSIS Baseline Privacy Interface Plus."
MODULE -- docsBpi2MIB
-- unconditionally mandatory group
MANDATORY-GROUPS {
docsBpi2CmtsGroup
}
-- unconditionally optional group
GROUP docsBpi2CodeDownloadGroup
DESCRIPTION
"This group is optional for CMTSes. The implementation
decision of this group is left to the vendor"
-- constrain on mandatory range
OBJECT docsBpi2CmtsDefaultAuthLifetime
SYNTAX Integer32 (86400..6048000)
DESCRIPTION
"The refined range corresponds to the minimum and
maximum values in operational networks."
-- constrain on mandatory range
OBJECT docsBpi2CmtsDefaultTEKLifetime
SYNTAX Integer32 (1800..604800)
DESCRIPTION
"The refined range corresponds to the minimum and
maximum values in operational networks."
-- constrain on mandatory range
OBJECT docsBpi2CmtsAuthCmLifetime
SYNTAX Integer32 (86400..6048000)
DESCRIPTION
"The refined range corresponds to the minimum and
maximum values in operational networks."
-- constrain on Encryption algorithms
OBJECT docsBpi2CmtsTEKDataEncryptAlg
SYNTAX DocsBpkmDataEncryptAlg {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
DESCRIPTION
"It is compliant to only support des56CbcMode(1)
and des40CbcMode(2) for data encryption."
-- constrain on Integrity algorithms
OBJECT docsBpi2CmtsTEKDataAuthentAlg
SYNTAX DocsBpkmDataAuthentAlg {
none(0)
}
DESCRIPTION
"It is compliant to not support data message
authentication algorithms."
-- constrain on mandatory range
OBJECT docsBpi2CmtsTEKLifetime
SYNTAX Integer32 (1800..604800)
DESCRIPTION
"The refined range corresponds to the minimum and
maximum values in operational networks."
-- constrain on access
-- constrain on IP Addressing
OBJECT docsBpi2CmtsIpMulticastAddressType
SYNTAX InetAddressType { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
An implementation is only required to support IPv4
addresses. Support for other address types may be defined
in future versions of this MIB module."
OBJECT docsBpi2CmtsIpMulticastAddress
SYNTAX InetAddress (SIZE(4))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
An implementation is only required to support IPv4
addresses. Support for other address types may be defined
in future versions of this MIB module."
OBJECT docsBpi2CmtsIpMulticastMask
SYNTAX InetAddress (SIZE(4))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
An implementation is only required to support IPv4
addresses. Support for other address types may be defined
in future versions of this MIB module."
-- constrain on access
OBJECT docsBpi2CmtsIpMulticastSAId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT docsBpi2CmtsIpMulticastSAType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- constrain on access
-- constrain on Encryption algorithms
OBJECT docsBpi2CmtsIpMulticastDataEncryptAlg
SYNTAX DocsBpkmDataEncryptAlg {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
It is compliant to only support des56CbcMode(1)
and des40CbcMode(2) for data encryption"
-- constrain on access
-- constrain on Integrity algorithms
OBJECT docsBpi2CmtsIpMulticastDataAuthentAlg
SYNTAX DocsBpkmDataAuthentAlg {
none(0)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
It is compliant to not support data message
authentication algorithms."
-- constrain on access
OBJECT docsBpi2CmtsMulticastAuthControl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { docsBpi2Compliances 2 }
docsBpi2CmGroup OBJECT-GROUP
OBJECTS {
docsBpi2CmPrivacyEnable,
docsBpi2CmPublicKey,
docsBpi2CmAuthState,
docsBpi2CmAuthKeySequenceNumber,
docsBpi2CmAuthExpiresOld,
docsBpi2CmAuthExpiresNew,
docsBpi2CmAuthReset,
docsBpi2CmAuthGraceTime,
docsBpi2CmTEKGraceTime,
docsBpi2CmAuthWaitTimeout,
docsBpi2CmReauthWaitTimeout,
docsBpi2CmOpWaitTimeout,
docsBpi2CmRekeyWaitTimeout,
docsBpi2CmAuthRejectWaitTimeout,
docsBpi2CmSAMapWaitTimeout,
docsBpi2CmSAMapMaxRetries,
docsBpi2CmAuthentInfos,
docsBpi2CmAuthRequests,
docsBpi2CmAuthReplies,
docsBpi2CmAuthRejects,
docsBpi2CmAuthInvalids,
docsBpi2CmAuthRejectErrorCode,
docsBpi2CmAuthRejectErrorString,
docsBpi2CmAuthInvalidErrorCode,
docsBpi2CmAuthInvalidErrorString,
docsBpi2CmTEKSAType,
docsBpi2CmTEKDataEncryptAlg,
docsBpi2CmTEKDataAuthentAlg,
docsBpi2CmTEKState,
docsBpi2CmTEKKeySequenceNumber,
docsBpi2CmTEKExpiresOld,
docsBpi2CmTEKExpiresNew,
docsBpi2CmTEKKeyRequests,
docsBpi2CmTEKKeyReplies,
docsBpi2CmTEKKeyRejects,
docsBpi2CmTEKInvalids,
docsBpi2CmTEKAuthPends,
docsBpi2CmTEKKeyRejectErrorCode,
docsBpi2CmTEKKeyRejectErrorString,
docsBpi2CmTEKInvalidErrorCode,
docsBpi2CmTEKInvalidErrorString,
docsBpi2CmIpMulticastAddressType,
docsBpi2CmIpMulticastAddress,
docsBpi2CmIpMulticastSAId,
docsBpi2CmIpMulticastSAMapState,
docsBpi2CmIpMulticastSAMapRequests,
docsBpi2CmIpMulticastSAMapReplies,
docsBpi2CmIpMulticastSAMapRejects,
docsBpi2CmIpMulticastSAMapRejectErrorCode,
docsBpi2CmIpMulticastSAMapRejectErrorString,
docsBpi2CmDeviceCmCert,
docsBpi2CmDeviceManufCert,
docsBpi2CmCryptoSuiteDataEncryptAlg,
docsBpi2CmCryptoSuiteDataAuthentAlg
}
STATUS current
DESCRIPTION
"This collection of objects provides CM BPI+ status
and control."
::= { docsBpi2Groups 1 }
docsBpi2CmtsGroup OBJECT-GROUP
OBJECTS {
docsBpi2CmtsDefaultAuthLifetime,
docsBpi2CmtsDefaultTEKLifetime,
docsBpi2CmtsDefaultSelfSignedManufCertTrust,
docsBpi2CmtsCheckCertValidityPeriods,
docsBpi2CmtsAuthentInfos,
docsBpi2CmtsAuthRequests,
docsBpi2CmtsAuthReplies,
docsBpi2CmtsAuthRejects,
docsBpi2CmtsAuthInvalids,
docsBpi2CmtsSAMapRequests,
docsBpi2CmtsSAMapReplies,
docsBpi2CmtsSAMapRejects,
docsBpi2CmtsAuthCmBpiVersion,
docsBpi2CmtsAuthCmPublicKey,
docsBpi2CmtsAuthCmKeySequenceNumber,
docsBpi2CmtsAuthCmExpiresOld,
docsBpi2CmtsAuthCmExpiresNew,
docsBpi2CmtsAuthCmLifetime,
docsBpi2CmtsAuthCmReset,
docsBpi2CmtsAuthCmInfos,
docsBpi2CmtsAuthCmRequests,
docsBpi2CmtsAuthCmReplies,
docsBpi2CmtsAuthCmRejects,
docsBpi2CmtsAuthCmInvalids,
docsBpi2CmtsAuthRejectErrorCode,
docsBpi2CmtsAuthRejectErrorString,
docsBpi2CmtsAuthInvalidErrorCode,
docsBpi2CmtsAuthInvalidErrorString,
docsBpi2CmtsAuthPrimarySAId,
docsBpi2CmtsAuthBpkmCmCertValid,
docsBpi2CmtsAuthBpkmCmCert,
docsBpi2CmtsAuthCACertIndexPtr,
docsBpi2CmtsTEKSAType,
docsBpi2CmtsTEKDataEncryptAlg,
docsBpi2CmtsTEKDataAuthentAlg,
docsBpi2CmtsTEKLifetime,
docsBpi2CmtsTEKKeySequenceNumber,
docsBpi2CmtsTEKExpiresOld,
docsBpi2CmtsTEKExpiresNew,
docsBpi2CmtsTEKReset,
docsBpi2CmtsKeyRequests,
docsBpi2CmtsKeyReplies,
docsBpi2CmtsKeyRejects,
docsBpi2CmtsTEKInvalids,
docsBpi2CmtsKeyRejectErrorCode,
docsBpi2CmtsKeyRejectErrorString,
docsBpi2CmtsTEKInvalidErrorCode,
docsBpi2CmtsTEKInvalidErrorString,
docsBpi2CmtsIpMulticastAddressType,
docsBpi2CmtsIpMulticastAddress,
docsBpi2CmtsIpMulticastMask,
docsBpi2CmtsIpMulticastSAId,
docsBpi2CmtsIpMulticastSAType,
docsBpi2CmtsIpMulticastDataEncryptAlg,
docsBpi2CmtsIpMulticastDataAuthentAlg,
docsBpi2CmtsIpMulticastSAMapRequests,
docsBpi2CmtsIpMulticastSAMapReplies,
docsBpi2CmtsIpMulticastSAMapRejects,
docsBpi2CmtsIpMulticastSAMapRejectErrorCode,
docsBpi2CmtsIpMulticastSAMapRejectErrorString,
docsBpi2CmtsIpMulticastMapControl,
docsBpi2CmtsIpMulticastMapStorageType,
docsBpi2CmtsMulticastAuthControl,
docsBpi2CmtsProvisionedCmCertTrust,
docsBpi2CmtsProvisionedCmCertSource,
docsBpi2CmtsProvisionedCmCertStatus,
docsBpi2CmtsProvisionedCmCert,
docsBpi2CmtsCACertSubject,
docsBpi2CmtsCACertIssuer,
docsBpi2CmtsCACertSerialNumber,
docsBpi2CmtsCACertTrust,
docsBpi2CmtsCACertSource,
docsBpi2CmtsCACertStatus,
docsBpi2CmtsCACert,
docsBpi2CmtsCACertThumbprint
}
STATUS current
DESCRIPTION
"This collection of objects provides CMTS BPI+ status
and control."
::= { docsBpi2Groups 2 }
docsBpi2CodeDownloadGroup OBJECT-GROUP
OBJECTS {
docsBpi2CodeDownloadStatusCode,
docsBpi2CodeDownloadStatusString,
docsBpi2CodeMfgOrgName,
docsBpi2CodeMfgCodeAccessStart,
docsBpi2CodeMfgCvcAccessStart,
docsBpi2CodeCoSignerOrgName,
docsBpi2CodeCoSignerCodeAccessStart,
docsBpi2CodeCoSignerCvcAccessStart,
docsBpi2CodeCvcUpdate
}
STATUS current
DESCRIPTION
"This collection of objects provides authenticated
software download support."
::= { docsBpi2Groups 3 }
END