Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
FRSLD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Gauge32, Integer32,
Counter64, TimeTicks, mib-2 FROM SNMPv2-SMI
CounterBasedGauge64 FROM HCNUM-TC
TEXTUAL-CONVENTION, RowStatus,
TimeStamp FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB
DLCI FROM FRAME-RELAY-DTE-MIB;
frsldMIB MODULE-IDENTITY
LAST-UPDATED "200201030000Z" -- January 3, 2002
ORGANIZATION "IETF Frame Relay Service MIB Working Group"
CONTACT-INFO
"IETF Frame Relay Service MIB (frnetmib) Working Group
WG Charter: http://www.ietf.org/html.charters/
frnetmib-charter.html
WG-email: frnetmib@sunroof.eng.sun.com
Subscribe: frnetmib-request@sunroof.eng.sun.com
Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
Chair: Andy Malis
Vivace Networks
Email: Andy.Malis@vivacenetworks.com
WG editor: Robert Steinberger
Paradyne Networks and
Fujitsu Network Communications
Email: robert.steinberger@fnc.fujitsu.com
Co-author: Orly Nicklass
RAD Data Communications Ltd.
EMail: Orly_n@rad.co.il"
DESCRIPTION
"The MIB module to describe generic objects for
FRF.13 Frame Relay Service Level Definitions."
REVISION "200201030000Z" -- January 3, 2002
DESCRIPTION
"Initial version, published as RFC 3202"
::= { mib-2 95 }
--
-- Textual Conventions
--
FrsldTxRP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference point a PVC uses for calculation
of transmitter related statistics.
The valid values for this type of object are as follows:
- srcLocalRP(1) for the local source
- ingTxLocalRP(2) for the local ingress queue input
- tpTxLocalRP(3) for the local traffic policing
- eqiTxLocalRP(4) for the local egress queue input
- eqoTxLocalRP(5) for the local egress queue output
- otherTxLocalRP(6) for any other local transmit point
- srcRemoteRP(7) for the remote source
- ingTxLocalRP(8) for the remote ingress queue input
- tpTxLocalRP(9) for the remote traffic policing
- eqiTxRemoteRP(10) for the remote egress queue input
- eqoTxRemoteRP(11) for the remote egress queue output
- otherTxRemoteRP(12) for any other remote xmit point"
REFERENCE
"FRF.13: Section 2.3"
SYNTAX INTEGER {
srcLocalRP(1),
ingTxLocalRP(2),
tpTxLocalRP(3),
eqiTxLocalRP(4),
eqoTxLocalRP(5),
otherTxLocalRP(6),
srcRemoteRP(7),
ingTxRemoteRP(8),
tpTxRemoteRP(9),
eqiTxRemoteRP(10),
eqoTxRemoteRP(11),
otherTxRemoteRP(12)
}
FrsldRxRP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference point a PVC uses for calculation
of receiver related statistics.
The valid values for this object are as follows:
- desLocalRP(1) for the local destination
- ingRxLocalRP(2) for the local ingress queue input
- tpRxLocalRP(3) for the local traffic policing
- eqiRxLocalRP(4) for the local egress queue input
- eqoRxLocalRP(5) for the local egress queue output
- otherRxLocalRP(6) for any other local receive point
- desRemoteRP(7) for the remote destination
- ingRxRemoteRP(8) for the remote ingress input
- tpRxRemoteRP(9) for the remote traffic policing
- eqiRxRemoteRP(10) for the remote egress queue input
- eqoRxRemoteRP(11) for the remote egress queue output
- otherRxRemoteRP(12) for any other remote receive point"
REFERENCE
"FRF.13: Section 2.3"
SYNTAX INTEGER {
desLocalRP(1),
ingRxLocalRP(2),
tpRxLocalRP(3),
eqiRxLocalRP(4),
eqoRxLocalRP(5),
otherRxLocalRP(6),
desRemoteRP(7),
ingRxRemoteRP(8),
tpRxRemoteRP(9),
eqiRxRemoteRP(10),
eqoRxRemoteRP(11),
otherRxRemoteRP(12)
}
--
-- Base Objects
---
frsldObjects OBJECT IDENTIFIER ::= { frsldMIB 1 }
frsldCapabilities OBJECT IDENTIFIER ::= { frsldMIB 2 }
frsldConformance OBJECT IDENTIFIER ::= { frsldMIB 3 }
-- The Frame Relay Service Level Definitions PVC Control Table
--
-- This table is used to define and display the parameters of
-- service level definitions on individual PVCs.
frsldPvcCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldPvcCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
PVC control table."
::= { frsldObjects 1 }
frsldPvcCtrlEntry OBJECT-TYPE
SYNTAX FrsldPvcCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions PVC control table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}
::= { frsldPvcCtrlTable 1 }
FrsldPvcCtrlEntry ::=
SEQUENCE {
--
-- Index Control Variables
--
frsldPvcCtrlDlci DLCI,
frsldPvcCtrlTransmitRP FrsldTxRP,
frsldPvcCtrlReceiveRP FrsldRxRP,
frsldPvcCtrlStatus RowStatus,
--
-- Service Level Definitions Setup Variables
--
frsldPvcCtrlPacketFreq Integer32,
--
-- Delay Specific Setup Variables
--
frsldPvcCtrlDelayFrSize Integer32,
frsldPvcCtrlDelayType INTEGER,
frsldPvcCtrlDelayTimeOut Integer32,
--
-- Data Persistence Control Variables
--
frsldPvcCtrlPurge Integer32,
frsldPvcCtrlDeleteOnPurge INTEGER,
frsldPvcCtrlLastPurgeTime TimeStamp
}
frsldPvcCtrlDlci OBJECT-TYPE
SYNTAX DLCI
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is equal to the DLCI
value for this PVC."
::= { frsldPvcCtrlEntry 1 }
frsldPvcCtrlTransmitRP OBJECT-TYPE
SYNTAX FrsldTxRP
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reference point this PVC uses for calculation
of transmitter related statistics. This object
together with frsldPvcCtrlReceiveRP define the
measurement domain."
REFERENCE
"FRF.13: Section 2.3"
::= { frsldPvcCtrlEntry 2 }
frsldPvcCtrlReceiveRP OBJECT-TYPE
SYNTAX FrsldRxRP
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reference point this PVC uses for calculation
of receiver related statistics. This object
together with frsldPvcCtrlTransmitRP define the
measurement domain."
::= { frsldPvcCtrlEntry 3 }
frsldPvcCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the current row. This object is
used to add, delete, and disable rows in this
table. When the status changes to active(1) for the
first time, a row will also be added to the data
table below. This row SHOULD not be removed until
the status is changed to deleted.
When this object is set to destroy(6), all associated
sample and data table rows will also be deleted.
When this object is changed from active(1) to any
other valid value, the defined purge behavior will
affect the data and sample tables.
The rows added to this table MUST have a valid
ifIndex and an ifType related to frame relay. Further,
the reference points referred to by frsldPvcCtrlTransmitRP
and frsldPvcCtrlReceiveRP MUST be supported (see the
frsldRPCaps object).
If at any point the row is not in the active(1) state
and the DLCI no longer exists, the state SHOULD
report notReady(3).
The data in this table SHOULD persist through power
cycles. The symantics of readiness for the rows still
applies. This means that it is possible for a row to be
reprovisioned as notReady(3) if the underlying DLCI does
not persist."
::= { frsldPvcCtrlEntry 4 }
frsldPvcCtrlPacketFreq OBJECT-TYPE
SYNTAX Integer32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency in seconds between initiation of
specialized packets used to collect delay and / or
delivery information as supported by the device.
A value of zero indicates that no packets will
be sent."
DEFVAL { 60 }
::= { frsldPvcCtrlEntry 5 }
frsldPvcCtrlDelayFrSize OBJECT-TYPE
SYNTAX Integer32 (1..8188)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the payload in the frame used for
calculation of network delay."
DEFVAL { 128 }
::= { frsldPvcCtrlEntry 6 }
frsldPvcCtrlDelayType OBJECT-TYPE
SYNTAX INTEGER {
oneWay(1),
roundTrip(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of delay measurement performed."
REFERENCE
"FRF.13: Section 3"
::= { frsldPvcCtrlEntry 7 }
frsldPvcCtrlDelayTimeOut OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A delay frame will count as a missed poll if
it is not updated in the time specified by
frsldPvcCtrlDelayTimeOut."
DEFVAL { 60 }
::= { frsldPvcCtrlEntry 8 }
frsldPvcCtrlPurge OBJECT-TYPE
SYNTAX Integer32 (0..172800) -- up to 48 hours
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the amount of time the device
will wait, after discovering that a DLCI does not exist,
the DLCI was deleted or the value of frsldPvcCtrlStatus
changes from active(1) to either notInService(2) or
notReady(3), prior to automatically purging the history
in the sample tables and resetting the data in the data
tables to all zeroes. If frsldPvcCtrlStatus is manually
set to destroy(6), this object does not apply."
DEFVAL { 0 }
::= { frsldPvcCtrlEntry 9 }
frsldPvcCtrlDeleteOnPurge OBJECT-TYPE
SYNTAX INTEGER {
none(1),
sampleContols(2),
all(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether rows will
automatically be deleted from the tables
when the information is purged.
- A value of none(1) indicates that no rows
will deleted. The last known values will
be preserved.
- A value of sampleControls(2) indicates
that all associated sample control rows
will be deleted.
- A value of all(3) indicates that all
associated rows SHOULD be deleted."
DEFVAL { all }
::= { frsldPvcCtrlEntry 10 }
frsldPvcCtrlLastPurgeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the value of sysUpTime
at the time the information was last purged.
This value SHOULD be set to the sysUpTime
upon setting frsldPvcCtrlStatus to active(1)
for the first time. Each time a
discontinuity in the counters occurs, this
value MUST be set to the sysUpTime.
If frsldPvcCtrlStatus has never been active(1),
this object SHOULD return 0.
This object SHOULD be used as the discontinuity
timer for the counters in frsldPvcDataTable."
::= { frsldPvcCtrlEntry 11 }
-- The Frame Relay Service Level Definitions Sampling Control
-- Table
--
-- This table is used to define the sample control parameters
-- of service level definitions on individual PVCs.
frsldSmplCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldSmplCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
sampling control table."
::= { frsldObjects 2 }
frsldSmplCtrlEntry OBJECT-TYPE
SYNTAX FrsldSmplCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions sample control table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP,
frsldSmplCtrlIdx }
::= { frsldSmplCtrlTable 1 }
FrsldSmplCtrlEntry ::=
SEQUENCE {
--
-- Index Control Variables
--
frsldSmplCtrlIdx Integer32,
frsldSmplCtrlStatus RowStatus,
--
-- Collection Control Variables
--
frsldSmplCtrlColPeriod Integer32,
frsldSmplCtrlBuckets Integer32,
frsldSmplCtrlBucketsGranted Integer32
}
frsldSmplCtrlIdx OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index for this row in the
sample control table."
::= { frsldSmplCtrlEntry 1 }
frsldSmplCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the current row. This object is
used to add, delete, and disable rows in this
table. This row SHOULD NOT be removed until the
status is changed to destroy(6). When the status
changes to active(1), the collection in the sample
tables below will be activated.
The rows added to this table MUST have a valid
ifIndex, an ifType related to frame relay,
frsldPvcCtrlDlci MUST exist for the specified
ifIndex and frsldPvcCtrlStatus MUST have a
value of active(1).
The value of frsldPvcCtrlStatus MUST be active(1)
to transition this object to active(1). If
the value of frsldPvcCtrlStatus becomes anything
other than active(1) when the state of this object
is not active(1), this object SHOULD be set to
notReady(3).
The data in this table SHOULD persist through power
cycles. The symantics of readiness for the rows still
applies. This means that it is possible for a row to be
reprovisioned as notReady(3) if the underlying DLCI does
not persist."
::= { frsldSmplCtrlEntry 2 }
frsldSmplCtrlColPeriod OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time in seconds that defines a
period of collection for the statistics.
At the end of each period, the statistics will be
sampled and a row is added to the sample table."
::= { frsldSmplCtrlEntry 3 }
frsldSmplCtrlBuckets OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of discrete buckets over which the
data statistics are sampled.
When this object is created or modified, the device
SHOULD attempt to set the frsldSmplCtrlBuckets-
Granted to a value as close as is possible
depending upon the implementation and the available
resources."
DEFVAL { 60 }
::= { frsldSmplCtrlEntry 4 }
frsldSmplCtrlBucketsGranted OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discrete buckets granted. This
object will return 0 until frsldSmplCtrlStatus is
set to active(1). At that time the buckets will be
allocated depending upon implementation and
available resources."
::= { frsldSmplCtrlEntry 5 }
-- The Frame Relay Service Level Definitions PVC Data Table
--
-- This table contains the accumulated values of
-- the collected data. This table is the table that should
-- be referenced by external polling mechanisms if time
-- based polling be desired.
frsldPvcDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldPvcDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
data table.
This table contains accumulated values of the
collected data. It is the table that should be
referenced by external polling mechanisms if
time based polling be desired."
::= { frsldObjects 3 }
frsldPvcDataEntry OBJECT-TYPE
SYNTAX FrsldPvcDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions data table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}
::= { frsldPvcDataTable 1 }
FrsldPvcDataEntry ::=
SEQUENCE {
frsldPvcDataMissedPolls Counter32,
frsldPvcDataFrDeliveredC Counter32,
frsldPvcDataFrDeliveredE Counter32,
frsldPvcDataFrOfferedC Counter32,
frsldPvcDataFrOfferedE Counter32,
frsldPvcDataDataDeliveredC Counter32,
frsldPvcDataDataDeliveredE Counter32,
frsldPvcDataDataOfferedC Counter32,
frsldPvcDataDataOfferedE Counter32,
frsldPvcDataHCFrDeliveredC Counter64,
frsldPvcDataHCFrDeliveredE Counter64,
frsldPvcDataHCFrOfferedC Counter64,
frsldPvcDataHCFrOfferedE Counter64,
frsldPvcDataHCDataDeliveredC Counter64,
frsldPvcDataHCDataDeliveredE Counter64,
frsldPvcDataHCDataOfferedC Counter64,
frsldPvcDataHCDataOfferedE Counter64,
frsldPvcDataUnavailableTime TimeTicks,
frsldPvcDataUnavailables Counter32
}
frsldPvcDataMissedPolls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of polls that have been determined
to be missed. These polls are typically associated
with the calculation of delay but may also be
used for the calculation of other statistics. If an
anticipated poll is not received in a reasonable
amount of time, it should be counted as missed.
The value used to determine the reasonable amount
of time is contained in frsldPvcCtrlDelayTimeOut.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
::= { frsldPvcDataEntry 1 }
frsldPvcDataFrDeliveredC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliveredc)"
::= { frsldPvcDataEntry 2 }
frsldPvcDataFrDeliveredE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliverede)"
::= { frsldPvcDataEntry 3 }
frsldPvcDataFrOfferedC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferedc)"
::= { frsldPvcDataEntry 4 }
frsldPvcDataFrOfferedE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferede)"
::= { frsldPvcDataEntry 5 }
frsldPvcDataDataDeliveredC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliveredc)"
::= { frsldPvcDataEntry 6 }
frsldPvcDataDataDeliveredE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliverede)"
::= { frsldPvcDataEntry 7 }
frsldPvcDataDataOfferedC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataOfferedc)"
::= { frsldPvcDataEntry 8 }
frsldPvcDataDataOfferedE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataOfferede)"
::= { frsldPvcDataEntry 9 }
frsldPvcDataHCFrDeliveredC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR. This object is a 64-bit version
of frsldPvcDataFrDeliveredC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliveredc)"
::= { frsldPvcDataEntry 10 }
frsldPvcDataHCFrDeliveredE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR. This object is a 64-bit
version of frsldPvcDataFrDeliveredE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliverede)"
::= { frsldPvcDataEntry 11 }
frsldPvcDataHCFrOfferedC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR. This object is
a 64-bit version of frsldPvcDataFrOfferedC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferedc)"
::= { frsldPvcDataEntry 12 }
frsldPvcDataHCFrOfferedE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR. This
object is a 64-bit version of frsldPvcDataFrOfferedE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferede)"
::= { frsldPvcDataEntry 13 }
frsldPvcDataHCDataDeliveredC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR. This object is a 64-bit version of
frsldPvcDataDataDeliveredC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliveredc)"
::= { frsldPvcDataEntry 14 }
frsldPvcDataHCDataDeliveredE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR. This object is a 64-bit
version of frsldPvcDataDataDeliveredE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliverede)"
::= { frsldPvcDataEntry 15 }
frsldPvcDataHCDataOfferedC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR. This object is
a 64-bit version of frsldPvcDataDataOfferedC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataOfferedc)"
::= { frsldPvcDataEntry 16 }
frsldPvcDataHCDataOfferedE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
This object is a 64-bit version of
frsldPvcDataDataOfferedE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataOfferede)"
::= { frsldPvcDataEntry 17 }
frsldPvcDataUnavailableTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time this PVC was declared unavailable
for any reason since this row was created."
REFERENCE
"FRF.13: Section 6.1 (OutageTime)"
::= { frsldPvcDataEntry 18 }
frsldPvcDataUnavailables OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this PVC was declared unavailable
for any reason since this row was created.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 6.1 (OutageCount)"
::= { frsldPvcDataEntry 19 }
-- The Frame Relay Service Level Definitions PVC Sample Table
--
-- This table contains the sampled delay, delivery and
-- availability information.
frsldPvcSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldPvcSampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
sample table."
::= { frsldObjects 4 }
frsldPvcSampleEntry OBJECT-TYPE
SYNTAX FrsldPvcSampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions data sample table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP,
frsldSmplCtrlIdx, frsldPvcSmplIdx }
::= { frsldPvcSampleTable 1 }
FrsldPvcSampleEntry ::=
SEQUENCE {
frsldPvcSmplIdx Integer32,
frsldPvcSmplDelayMin Gauge32,
frsldPvcSmplDelayMax Gauge32,
frsldPvcSmplDelayAvg Gauge32,
frsldPvcSmplMissedPolls Gauge32,
frsldPvcSmplFrDeliveredC Gauge32,
frsldPvcSmplFrDeliveredE Gauge32,
frsldPvcSmplFrOfferedC Gauge32,
frsldPvcSmplFrOfferedE Gauge32,
frsldPvcSmplDataDeliveredC Gauge32,
frsldPvcSmplDataDeliveredE Gauge32,
frsldPvcSmplDataOfferedC Gauge32,
frsldPvcSmplDataOfferedE Gauge32,
frsldPvcSmplHCFrDeliveredC CounterBasedGauge64,
frsldPvcSmplHCFrDeliveredE CounterBasedGauge64,
frsldPvcSmplHCFrOfferedC CounterBasedGauge64,
frsldPvcSmplHCFrOfferedE CounterBasedGauge64,
frsldPvcSmplHCDataDeliveredC CounterBasedGauge64,
frsldPvcSmplHCDataDeliveredE CounterBasedGauge64,
frsldPvcSmplHCDataOfferedC CounterBasedGauge64,
frsldPvcSmplHCDataOfferedE CounterBasedGauge64,
frsldPvcSmplUnavailableTime TimeTicks,
frsldPvcSmplUnavailables Gauge32,
frsldPvcSmplStartTime TimeStamp,
frsldPvcSmplEndTime TimeStamp
}
frsldPvcSmplIdx OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bucket index of the current sample. This
increments once for each new bucket in the
table."
::= { frsldPvcSampleEntry 1 }
frsldPvcSmplDelayMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum delay reported in microseconds measured
for any information packet that arrived during this
interval.
A value of zero means that no data is available."
REFERENCE
"FRF.13: Section 3.1 (FTD)"
::= { frsldPvcSampleEntry 2 }
frsldPvcSmplDelayMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest delay reported in microseconds measured
for any information packet that arrived during this
interval.
A value of zero means that no data is available."
REFERENCE
"FRF.13: Section 3.1 (FTD)"
::= { frsldPvcSampleEntry 3 }
frsldPvcSmplDelayAvg OBJECT-TYPE
SYNTAX Gauge32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average delay reported in microseconds measured
for all delay packets that arrived during this
interval.
A value of zero means that no data is available."
REFERENCE
"FRF.13: Section 3.1 (FTD)"
::= { frsldPvcSampleEntry 4 }
frsldPvcSmplMissedPolls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of polls that were missed during
this interval."
::= { frsldPvcSampleEntry 5 }
frsldPvcSmplFrDeliveredC OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrDeliveredC."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliveredc)"
::= { frsldPvcSampleEntry 6 }
frsldPvcSmplFrDeliveredE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrDeliveredE."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliverede))"
::= { frsldPvcSampleEntry 7 }
frsldPvcSmplFrOfferedC OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrOfferedC."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferedc)"
::= { frsldPvcSampleEntry 8 }
frsldPvcSmplFrOfferedE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrOfferedE."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferede)"
::= { frsldPvcSampleEntry 9 }
frsldPvcSmplDataDeliveredC OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataDeliveredC."
REFERENCE
"FRF.13: Section 5.1 (DataDeliveredc)"
::= { frsldPvcSampleEntry 10 }
frsldPvcSmplDataDeliveredE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlDeliveredRP and determined to have been
sent in excess of the CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataDeliveredE."
REFERENCE
"FRF.13: Section 5.1 (DataDeliverede)"
::= { frsldPvcSampleEntry 11 }
frsldPvcSmplDataOfferedC OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataOfferredC."
REFERENCE
"FRF.13: Section 5.1 (DataOfferedc)"
::= { frsldPvcSampleEntry 12 }
frsldPvcSmplDataOfferedE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataOfferedE."
REFERENCE
"FRF.13: Section 5.1 (DataOfferede)"
::= { frsldPvcSampleEntry 13 }
frsldPvcSmplHCFrDeliveredC OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval. This object
is a 64-bit version of frsldPvcSmplFrDeliveredC."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliveredc)"
::= { frsldPvcSampleEntry 14 }
frsldPvcSmplHCFrDeliveredE OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR during this interval.
This object is a 64-bit version of frsldPvcSmpl-
FrDeliveredE."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliverede)"
::= { frsldPvcSampleEntry 15 }
frsldPvcSmplHCFrOfferedC OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval. This object is a 64-bit version of
frsldPvcSmplFrOfferedC."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferedc)"
::= { frsldPvcSampleEntry 16 }
frsldPvcSmplHCFrOfferedE OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval. This object is a 64-bit
version of frsldPvcSmplFrOfferedE."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferede)"
::= { frsldPvcSampleEntry 17 }
frsldPvcSmplHCDataDeliveredC OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval. This value
is a 64-bit version of frsldPvcSmplDataDeliveredC."
REFERENCE
"FRF.13: Section 5.1 (DataDeliveredc)"
::= { frsldPvcSampleEntry 18 }
frsldPvcSmplHCDataDeliveredE OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR during this interval. This
value is a 64-bit version of frsldPvcSmplData-
DeliveredE."
REFERENCE
"FRF.13: Section 5.1 (DataDeliverede)"
::= { frsldPvcSampleEntry 19 }
frsldPvcSmplHCDataOfferedC OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval. This value is a 64-bit version of
frsldPvcSmplDataOfferedC."
REFERENCE
"FRF.13: Section 5.1 (DataOfferedc)"
::= { frsldPvcSampleEntry 20 }
frsldPvcSmplHCDataOfferedE OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval. This object is a 64-bit
version of frsldPvcSmplDataOfferedE."
REFERENCE
"FRF.13: Section 5.1 (DataOfferede)"
::= { frsldPvcSampleEntry 21 }
frsldPvcSmplUnavailableTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time this PVC was declared
unavailable for any reason during this interval."
REFERENCE
"FRF.13: Section 6.1 (OutageTime)"
::= { frsldPvcSampleEntry 22 }
frsldPvcSmplUnavailables OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this PVC was declared
unavailable for any reason during this interval."
REFERENCE
"FRF.13: Section 6.1 (OutageCount)"
::= { frsldPvcSampleEntry 23 }
frsldPvcSmplStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this sample interval
started."
::= { frsldPvcSampleEntry 24 }
frsldPvcSmplEndTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this sample interval
ended. No data will be reported and the row will
not appear in the table until the sample has
been collected."
::= { frsldPvcSampleEntry 25 }
-- Capabilities Group
-- This group provides capabilities objects for the tables
-- that control configuration.
frsldPvcCtrlWriteCaps OBJECT-TYPE
SYNTAX BITS {
frsldPvcCtrlStatus(0),
frsldPvcCtrlPacketFreq(1),
frsldPvcCtrlDelayFrSize(2),
frsldPvcCtrlDelayType(3),
frsldPvcCtrlDelayTimeOut(4),
frsldPvcCtrlPurge(5),
frsldPvcCtrlDeleteOnPurge(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the write capabilities
for the read-create objects of the PVC Control
table. If the corresponding bit is enabled (1),
the agent supports writes to that object."
::= { frsldCapabilities 1 }
frsldSmplCtrlWriteCaps OBJECT-TYPE
SYNTAX BITS {
frsldSmplCtrlStatus(0),
frsldSmplCtrlBuckets(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the write capabilities
for the read-create objects of the Sample Control
table. If the corresponding bit is enabled (1),
the agent supports writes to that object."
::= { frsldCapabilities 2 }
frsldRPCaps OBJECT-TYPE
SYNTAX BITS {
srcLocalRP(0),
ingTxLocalRP(1),
tpTxLocalRP(2),
eqiTxLocalRP(3),
eqoTxLocalRP(4),
otherTxLocalRP(5),
srcRemoteRP(6),
ingTxRemoteRP(7),
tpTxRemoteRP(8),
eqiTxRemoteRP(9),
eqoTxRemoteRP(10),
otherTxRemoteRP(11),
desLocalRP(12),
ingRxLocalRP(13),
tpRxLocalRP(14),
eqiRxLocalRP(15),
eqoRxLocalRP(16),
otherRxLocalRP(17),
desRemoteRP(18),
ingRxRemoteRP(19),
tpRxRemoteRP(20),
eqiRxRemoteRP(21),
eqoRxRemoteRP(22),
otherRxRemoteRP(23)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the reference points that
the agent supports. This object allows the management
application to discover which rows can be created on
a specific device."
::= { frsldCapabilities 3 }
frsldMaxPvcCtrls OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of control rows that can be created
in frsldPvcCtrlTable. Sets to this object lower than
the current value of frsldNumPvcCtrls should result in
inconsistentValue."
::= { frsldCapabilities 4 }
frsldNumPvcCtrls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of rows in frsldPvcCtrlTable."
::= { frsldCapabilities 5 }
frsldMaxSmplCtrls OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of control rows that can be created
in frsldSmplCtrlTable. Sets to this object lower than
the current value of frsldNumSmplCtrls should result in
inconsistentValue."
::= { frsldCapabilities 6 }
frsldNumSmplCtrls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of rows in frsldSmplCtrlTable."
::= { frsldCapabilities 7 }
-- Conformance Information
frsldMIBGroups OBJECT IDENTIFIER ::= { frsldConformance 1 }
frsldMIBCompliances OBJECT IDENTIFIER ::= { frsldConformance 2 }
--
-- Compliance Statements
--
frsldCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
which support with Frame Relay Service Level
Definitions. This group defines the minimum
level of support required for compliance."
MODULE -- this module
MANDATORY-GROUPS { frsldPvcReqCtrlGroup,
frsldPvcReqDataGroup,
frsldCapabilitiesGroup}
GROUP frsldPvcHCFrameDataGroup
DESCRIPTION
"This group is mandatory only for those network
interfaces with corresponding instance of ifSpeed
greater than 650,000,000 bits/second."
GROUP frsldPvcHCOctetDataGroup
DESCRIPTION
"This group is mandatory only for those network
interfaces with corresponding instance of ifSpeed
greater than 650,000,000 bits/second."
GROUP frsldPvcPacketGroup
DESCRIPTION
"This group is optional. Network interfaces that
allow control of the packets used to collect
information are encouraged to implement this
group."
GROUP frsldPvcDelayCtrlGroup
DESCRIPTION
"This group is optional. Network interfaces that
offer control of the delay measurement are
strongly encouraged to implement this group."
GROUP frsldPvcSampleCtrlGroup
DESCRIPTION
"This group is mandatory only for those network
interfaces that allow data sampling."
GROUP frsldPvcDelayDataGroup
DESCRIPTION
"This group is only mandatory when
frsldPvcDelayCtrlGroup is implemented. It is
strongly encouraged that any device capable
of measuring delay implement this group."
GROUP frsldPvcSampleDelayGroup
DESCRIPTION
"This group is only mandatory when both
frsldPvcSampleCtrlGroup and frsldPvcDelayDataGroup
are supported."
GROUP frsldPvcSampleDataGroup
DESCRIPTION
"This group is mandatory whenever
frsldPvcSampleCtrlGroup is supported."
GROUP frsldPvcSampleHCFrameGroup
DESCRIPTION
"This group is mandatory whenever both
frsldPvcSampleCtrlGroup and frsldPvcHCFrameDataGroup
are supported."
GROUP frsldPvcSampleHCDataGroup
DESCRIPTION
"This group is mandatory whenever both
frsldPvcSampleCtrlGroup and frsldPvcHCOctetDataGroup
are supported."
GROUP frsldPvcSampleAvailGroup
DESCRIPTION
"This group is mandatory whenever
frsldPvcSampleCtrlGroup is supported."
GROUP frsldPvcSampleGeneralGroup
DESCRIPTION
"This group is mandatory whenever
frsldPvcSampleCtrlGroup is supported."
OBJECT frsldPvcCtrlStatus
SYNTAX RowStatus { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Row creation can be done outside of the scope of
the SNMP protocol. If this object is implemented
with max-access of read-only, then the only value
that MUST be returned is active(1) and
frsldPvcCtrlWriteCaps MUST return 0 for the
frsldPvcCtrlStatus(0) bit."
OBJECT frsldPvcCtrlPurge
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. If this object is
implemented with a max-access of read-only, then
the frsldPvcCtrlPurge(5) bit must return 0."
OBJECT frsldPvcCtrlDeleteOnPurge
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. If this object is
implemented with a max-access of read-only, then
the frsldPvcCtrlDeleteOnPurge(6) bit must return
0."
OBJECT frsldMaxPvcCtrls
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required if the device either
dynamically allocates memory or statically allocates
a fixed number of entries. In the case of static
allocation, the device should always report the
correct maximum number of controls. In the case
of dynamic allocation, the device SHOULD always
report a number greater than frsldNumPvcCtrls
when allocation is possible and a number equal to
frsldNumPvcCtrls when allocation is not possible."
OBJECT frsldMaxSmplCtrls
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required if the device either
dynamically allocates memory or statically allocates
a fixed number of entries. In the case of static
allocation, the device should always report the
correct maximum number of controls. In the case
of dynamic allocation, the device SHOULD always
report a number greater than frsldNumSmplCtrls
when allocation is possible and a number equal to
frsldNumSmplCtrls when allocation is not possible."
::= { frsldMIBCompliances 1 }
--
-- Units of Conformance
--
frsldPvcReqCtrlGroup OBJECT-GROUP
OBJECTS {
frsldPvcCtrlStatus,
frsldPvcCtrlPurge,
frsldPvcCtrlDeleteOnPurge,
frsldPvcCtrlLastPurgeTime
}
STATUS current
DESCRIPTION
"A collection of required objects providing
control information applicable to a PVC which
implements Service Level Definitions."
::= { frsldMIBGroups 1 }
frsldPvcPacketGroup OBJECT-GROUP
OBJECTS {
frsldPvcCtrlPacketFreq
}
STATUS current
DESCRIPTION
"A collection of optional objects providing packet
level control information applicable to a PVC which
implements Service Level Definitions."
::= { frsldMIBGroups 2 }
frsldPvcDelayCtrlGroup OBJECT-GROUP
OBJECTS {
frsldPvcCtrlDelayFrSize,
frsldPvcCtrlDelayType,
frsldPvcCtrlDelayTimeOut
}
STATUS current
DESCRIPTION
"A collection of optional objects providing delay
control information applicable to a PVC which
implements Service Level Definitions.
If this group is implemented, frsldPvcPacketGroup
and frsldPvcDelayDataGroup MUST also be implemented."
::= { frsldMIBGroups 3 }
frsldPvcSampleCtrlGroup OBJECT-GROUP
OBJECTS {
frsldSmplCtrlStatus,
frsldSmplCtrlColPeriod,
frsldSmplCtrlBuckets,
frsldSmplCtrlBucketsGranted
}
STATUS current
DESCRIPTION
"A collection of optional objects providing sample
control information applicable to a PVC which
implements Service Level Definitions.
If this group is implemented, frsldPvcReqDataGroup
and frsldPvcSampleGeneralGroup MUST also be
implemented."
::= { frsldMIBGroups 4 }
frsldPvcReqDataGroup OBJECT-GROUP
OBJECTS {
frsldPvcDataFrDeliveredC,
frsldPvcDataFrDeliveredE,
frsldPvcDataFrOfferedC,
frsldPvcDataFrOfferedE,
frsldPvcDataDataDeliveredC,
frsldPvcDataDataDeliveredE,
frsldPvcDataDataOfferedC,
frsldPvcDataDataOfferedE,
frsldPvcDataUnavailableTime,
frsldPvcDataUnavailables
}
STATUS current
DESCRIPTION
"A collection of required objects providing data
collected on a PVC which implements Service
Level Definitions."
::= { frsldMIBGroups 5 }
frsldPvcDelayDataGroup OBJECT-GROUP
OBJECTS {
frsldPvcDataMissedPolls
}
STATUS current
DESCRIPTION
"A collection of optional objects providing delay
data collected on a PVC which implements Service
Level Definitions.
If this group is implemented, frsldPvcDelayCtrlGroup
MUST also be implemented."
::= { frsldMIBGroups 6 }
frsldPvcHCFrameDataGroup OBJECT-GROUP
OBJECTS {
frsldPvcDataHCFrDeliveredC,
frsldPvcDataHCFrDeliveredE,
frsldPvcDataHCFrOfferedC,
frsldPvcDataHCFrOfferedE
}
STATUS current
DESCRIPTION
"A collection of optional objects providing high
capacity frame data collected on a PVC which
implements Service Level Definitions."
::= { frsldMIBGroups 7 }
frsldPvcHCOctetDataGroup OBJECT-GROUP
OBJECTS {
frsldPvcDataHCDataDeliveredC,
frsldPvcDataHCDataDeliveredE,
frsldPvcDataHCDataOfferedC,
frsldPvcDataHCDataOfferedE
}
STATUS current
DESCRIPTION
"A collection of optional objects providing high
capacity octet data collected on a PVC which
implements Service Level Definitions."
::= { frsldMIBGroups 8 }
frsldPvcSampleDelayGroup OBJECT-GROUP
OBJECTS {
frsldPvcSmplDelayMin,
frsldPvcSmplDelayMax,
frsldPvcSmplDelayAvg,
frsldPvcSmplMissedPolls
}
STATUS current
DESCRIPTION
"A collection of optional objects providing delay
sample data collected on a PVC which implements
Service Level Definitions.
If this group is implemented, frsldPvcDelayCtrlGroup
MUST also be implemented."
::= { frsldMIBGroups 9 }
frsldPvcSampleDataGroup OBJECT-GROUP
OBJECTS {
frsldPvcSmplFrDeliveredC,
frsldPvcSmplFrDeliveredE,
frsldPvcSmplFrOfferedC,
frsldPvcSmplFrOfferedE,
frsldPvcSmplDataDeliveredC,
frsldPvcSmplDataDeliveredE,
frsldPvcSmplDataOfferedC,
frsldPvcSmplDataOfferedE
}
STATUS current
DESCRIPTION
"A collection of optional objects providing data
and frame delivery sample data collected on a PVC
which implements Service Level Definitions.
If this group is implemented, frsldPvcReqDataGroup
MUST also be implemented."
::= { frsldMIBGroups 10 }
frsldPvcSampleHCFrameGroup OBJECT-GROUP
OBJECTS {
frsldPvcSmplHCFrDeliveredC,
frsldPvcSmplHCFrDeliveredE,
frsldPvcSmplHCFrOfferedC,
frsldPvcSmplHCFrOfferedE
}
STATUS current
DESCRIPTION
"A collection of optional objects providing high
capacity frame delivery sample data collected on a PVC
which implements Service Level Definitions.
If this group is implemented, frsldPvcHCFrameDataGroup
MUST also be implemented."
::= { frsldMIBGroups 11 }
frsldPvcSampleHCDataGroup OBJECT-GROUP
OBJECTS {
frsldPvcSmplHCDataDeliveredC,
frsldPvcSmplHCDataDeliveredE,
frsldPvcSmplHCDataOfferedC,
frsldPvcSmplHCDataOfferedE
}
STATUS current
DESCRIPTION
"A collection of optional objects providing high
capacity data delivery sample data collected on a PVC
which implements Service Level Definitions.
If this group is implemented, frsldPvcHCOctetDataGroup
MUST also be implemented."
::= { frsldMIBGroups 12 }
frsldPvcSampleAvailGroup OBJECT-GROUP
OBJECTS {
frsldPvcSmplUnavailableTime,
frsldPvcSmplUnavailables
}
STATUS current
DESCRIPTION
"A collection of optional objects providing
availability sample data collected on a PVC which
implements Service Level Definitions.
If this group is implemented, frsldPvcReqDataGroup
MUST also be implemented."
::= { frsldMIBGroups 13 }
frsldPvcSampleGeneralGroup OBJECT-GROUP
OBJECTS {
frsldPvcSmplStartTime,
frsldPvcSmplEndTime
}
STATUS current
DESCRIPTION
"A collection of optional objects providing
general sample data collected on a PVC which
implements Service Level Definitions."
::= { frsldMIBGroups 14 }
frsldCapabilitiesGroup OBJECT-GROUP
OBJECTS {
frsldPvcCtrlWriteCaps,
frsldSmplCtrlWriteCaps,
frsldRPCaps,
frsldMaxPvcCtrls,
frsldNumPvcCtrls,
frsldMaxSmplCtrls,
frsldNumSmplCtrls
}
STATUS current
DESCRIPTION
"A collection of required objects providing
capability information and control for this
MIB module."
::= { frsldMIBGroups 15 }
END