Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
INTEGRATED-SERVICES-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, mib-2 FROM SNMPv2-SMI TimeInterval, TEXTUAL-CONVENTION, RowStatus, TruthValue, TestAndIncr FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndex FROM IF-MIB; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9]. intSrv MODULE-IDENTITY LAST-UPDATED "9511030500Z" -- Thu Aug 28 09:04:13 PDT 1997 ORGANIZATION "IETF Integrated Services Working Group" CONTACT-INFO " Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Tel: +1 805 681 0115 E-Mail: fred@cisco.com John Krawczyk Postal: ArrowPoint Communications 235 Littleton Road Westford, Massachusetts 01886 Tel: +1 508 692 5875 E-Mail: jjk@tiac.net" DESCRIPTION "The MIB module to describe the Integrated Services Protocol" ::= { mib-2 52 } intSrvObjects OBJECT IDENTIFIER ::= { intSrv 1 } intSrvGenObjects OBJECT IDENTIFIER ::= { intSrv 2 } intSrvNotifications OBJECT IDENTIFIER ::= { intSrv 3 } intSrvConformance OBJECT IDENTIFIER ::= { intSrv 4 } -- Textual Conventions -- SessionNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Session Number convention is used for numbers identifying sessions or saved PATH or RESV information. It is a number in the range returned by a TestAndIncr variable, having no protocol meaning whatsoever but serving instead as simple identifier. The alternative was a very complex instance or instance object that became unwieldy." SYNTAX INTEGER (0..2147483647) Protocol ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The value of the IP Protocol field of an IP Datagram Header. This identifies the protocol layer above IP. For example, the value 6 is used for TCP and the value 17 is used for UDP. The values of this field are defined in the As- signed Numbers RFC." SYNTAX INTEGER (1..255) SessionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of the C-Type field of a Session ob- ject, as defined in the RSVP specification. This value determines the lengths of octet strings and use of certain objects such as the 'port' variables. If the C-Type calls for an IP6 address, one would expect all source, des- tination, and next/previous hop addresses to be 16 bytes long, and for the ports to be UDP/TCP port numbers, for example." SYNTAX INTEGER (1..255) Port ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "d" ---- illegal for OCTET STRING. STATUS current DESCRIPTION "The value of the UDP or TCP Source or Destina- tion Port field, a virtual destination port or generalized port identifier used with the IPSEC Authentication Header or Encapsulating Security Payload, or other session discriminator. If it is not used, the value should be of length 0. This pair, when coupled with the IP Addresses of the source and destination system and the IP protocol field, uniquely identifies a data stream." SYNTAX OCTET STRING (SIZE(2..4)) MessageSize ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The size of a message in bytes. This is used to specify the minimum and maximum size of a message along an integrated services route." SYNTAX INTEGER (0..'7FFFFFFF'h) BitRate ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The rate, in bits/second, that data may move in the context. Applicable contexts minimally include the speed of an interface or virtual circuit, the data rate of a (potentially aggre- gated) data flow, or the data rate to be allo- cated for use by a flow." SYNTAX INTEGER (0..'7FFFFFFF'h) BurstSize ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The number of octets of IP Data, including IP Headers, that a stream may send without concern for policing." SYNTAX INTEGER (0..'7FFFFFFF'h) QosService ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The class of service in use by a flow." SYNTAX INTEGER { bestEffort (1), -- Best Effort Service guaranteedDelay (2), -- Guaranteed Delay controlledLoad (5) -- Controlled Load } -- The Integrated Services Interface Attributes Database contains -- information about resources allocated by resource reservation -- protocols, such as RSVP and ST-II. intSrvIfAttribTable OBJECT-TYPE SYNTAX SEQUENCE OF IntSrvIfAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The reservable attributes of the system's in- terfaces." ::= { intSrvObjects 1 } intSrvIfAttribEntry OBJECT-TYPE SYNTAX IntSrvIfAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The reservable attributes of a given inter- face." INDEX { ifIndex } ::= { intSrvIfAttribTable 1 } IntSrvIfAttribEntry ::= SEQUENCE { intSrvIfAttribAllocatedBits BitRate, intSrvIfAttribMaxAllocatedBits BitRate, intSrvIfAttribAllocatedBuffer BurstSize, intSrvIfAttribFlows Gauge32, intSrvIfAttribPropagationDelay Integer32, intSrvIfAttribStatus RowStatus } intSrvIfAttribAllocatedBits OBJECT-TYPE SYNTAX BitRate UNITS "Bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits/second currently allocated to reserved sessions on the interface." ::= { intSrvIfAttribEntry 1 } intSrvIfAttribMaxAllocatedBits OBJECT-TYPE SYNTAX BitRate UNITS "Bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of bits/second that may be allocated to reserved sessions on the inter- face." ::= { intSrvIfAttribEntry 2 } intSrvIfAttribAllocatedBuffer OBJECT-TYPE SYNTAX BurstSize UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of buffer space required to hold the simultaneous burst of all reserved flows on the interface." ::= { intSrvIfAttribEntry 3 } intSrvIfAttribFlows OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reserved flows currently active on this interface. A flow can be created ei- ther from a reservation protocol (such as RSVP or ST-II) or via configuration information." ::= { intSrvIfAttribEntry 4 } intSrvIfAttribPropagationDelay OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of propagation delay that this in- terface introduces in addition to that intro- diced by bit propagation delays." DEFVAL { 0 }-- by default, interfaces are presumed to add -- no extra delays ::= { intSrvIfAttribEntry 5 } intSrvIfAttribStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "'active' on interfaces that are configured for RSVP." ::= { intSrvIfAttribEntry 6 } -- The Integrated Services Active Flows Database -- lists all flows active on an outgoing interface, including -- relevant attributes. intSrvFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF IntSrvFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the reserved flows us- ing the system's interfaces." ::= { intSrvObjects 2 } intSrvFlowEntry OBJECT-TYPE SYNTAX IntSrvFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the use of a given in- terface by a given flow. The counter intSrvFlowPoliced starts counting at the in- stallation of the flow." INDEX { intSrvFlowNumber } ::= { intSrvFlowTable 1 } IntSrvFlowEntry ::= SEQUENCE { intSrvFlowNumber SessionNumber, intSrvFlowType SessionType, intSrvFlowOwner INTEGER, intSrvFlowDestAddr OCTET STRING, intSrvFlowSenderAddr OCTET STRING, intSrvFlowDestAddrLength INTEGER, intSrvFlowSenderAddrLength INTEGER, intSrvFlowProtocol Protocol, intSrvFlowDestPort Port, intSrvFlowPort Port, intSrvFlowFlowId INTEGER, intSrvFlowInterface InterfaceIndex, intSrvFlowIfAddr OCTET STRING, intSrvFlowRate BitRate, intSrvFlowBurst BurstSize, intSrvFlowWeight Integer32, intSrvFlowQueue Integer32, intSrvFlowMinTU MessageSize, intSrvFlowMaxTU MessageSize, intSrvFlowBestEffort Counter32, intSrvFlowPoliced Counter32, intSrvFlowDiscard TruthValue, intSrvFlowService QosService, intSrvFlowOrder INTEGER, intSrvFlowStatus RowStatus } intSrvFlowNumber OBJECT-TYPE SYNTAX SessionNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this flow. This is for SNMP In- dexing purposes only and has no relation to any protocol value." ::= { intSrvFlowEntry 1 } intSrvFlowType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { intSrvFlowEntry 2 } intSrvFlowOwner OBJECT-TYPE SYNTAX INTEGER { other(1), rsvp(2), management(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The process that installed this flow in the queue policy database." ::= { intSrvFlowEntry 3 } intSrvFlowDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { intSrvFlowEntry 4 } intSrvFlowSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 5 } intSrvFlowDestAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 6 } intSrvFlowSenderAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 7 } intSrvFlowProtocol OBJECT-TYPE SYNTAX Protocol MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Protocol used by a session. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 8 } intSrvFlowDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 9 } intSrvFlowPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 10 } intSrvFlowFlowId OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow ID that this sender is using, if this is an IPv6 session." ::= { intSrvFlowEntry 11 } intSrvFlowInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value of the interface on which this reservation exists." ::= { intSrvFlowEntry 12 } intSrvFlowIfAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address on the ifEntry on which this reservation exists. This is present primarily to support those interfaces which layer multi- ple IP Addresses on the interface." ::= { intSrvFlowEntry 13 } intSrvFlowRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The Reserved Rate of the sender's data stream. If this is a Controlled Load service flow, this rate is derived from the Tspec rate parameter (r). If this is a Guaranteed service flow, this rate is derived from the Rspec clearing rate parameter (R)." ::= { intSrvFlowEntry 14 } intSrvFlowBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option." ::= { intSrvFlowEntry 15 } intSrvFlowWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The weight used to prioritize the traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of weighting procedures." ::= { intSrvFlowEntry 16 } intSrvFlowQueue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of the queue used by this traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of queue identifiers." ::= { intSrvFlowEntry 17 } intSrvFlowMinTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { intSrvFlowEntry 18 } intSrvFlowMaxTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum datagram size for this flow that will conform to the traffic specification. This value cannot exceed the MTU of the interface." ::= { intSrvFlowEntry 19 } intSrvFlowBestEffort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that were remanded to best effort service." ::= { intSrvFlowEntry 20 } intSrvFlowPoliced OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets policed since the incep- tion of the flow's service." ::= { intSrvFlowEntry 21 } intSrvFlowDiscard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If 'true', the flow is to incur loss when traffic is policed. If 'false', policed traff- ic is treated as best effort traffic." DEFVAL { false } -- traffic is, by default, treated as best -- effort ::= { intSrvFlowEntry 22 } intSrvFlowService OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-only STATUS current DESCRIPTION "The QoS service being applied to this flow." ::= { intSrvFlowEntry 23 } intSrvFlowOrder OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "In the event of ambiguity, the order in which the classifier should make its comparisons. The row with intSrvFlowOrder=0 is tried first, and comparisons proceed in the order of in- creasing value. Non-serial implementations of the classifier should emulate this behavior." ::= { intSrvFlowEntry 24 } intSrvFlowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "'active' for all active flows. This object may be used to install static classifier infor- mation, delete classifier information, or au- thorize such." ::= { intSrvFlowEntry 25 } intSrvFlowNewIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assign values to intSrvFlowNumber as described in 'Textual Con- ventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of intSrvFlowEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions." ::= { intSrvGenObjects 1 } -- conformance information intSrvGroups OBJECT IDENTIFIER ::= { intSrvConformance 1 } intSrvCompliances OBJECT IDENTIFIER ::= { intSrvConformance 2 } -- compliance statements intSrvCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement " MODULE -- this module MANDATORY-GROUPS { intSrvIfAttribGroup, intSrvFlowsGroup } OBJECT intSrvFlowType MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowOwner MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowDestAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowSenderAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowDestAddrLength MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowSenderAddrLength MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowProtocol MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowDestPort MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowPort MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowFlowId MIN-ACCESS not-accessible DESCRIPTION "This object is needed only in a system that imple- ments IPv6." OBJECT intSrvFlowInterface MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowRate MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowBurst MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowWeight MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowQueue MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowMinTU MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowMaxTU MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT intSrvFlowStatus MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." ::= { intSrvCompliances 1 } intSrvIfAttribGroup OBJECT-GROUP OBJECTS { intSrvIfAttribAllocatedBits, intSrvIfAttribMaxAllocatedBits, intSrvIfAttribAllocatedBuffer, intSrvIfAttribFlows, intSrvIfAttribPropagationDelay, intSrvIfAttribStatus } STATUS current DESCRIPTION "These objects are required for Systems sup- porting the Integrated Services Architecture." ::= { intSrvGroups 1 } intSrvFlowsGroup OBJECT-GROUP OBJECTS { intSrvFlowType, intSrvFlowOwner, intSrvFlowDestAddr, intSrvFlowSenderAddr, intSrvFlowDestAddrLength, intSrvFlowSenderAddrLength, intSrvFlowProtocol, intSrvFlowDestPort, intSrvFlowPort, intSrvFlowInterface, intSrvFlowBestEffort, intSrvFlowRate, intSrvFlowBurst, intSrvFlowWeight, intSrvFlowQueue, intSrvFlowMinTU, intSrvFlowDiscard, intSrvFlowPoliced, intSrvFlowService, intSrvFlowIfAddr, intSrvFlowOrder, intSrvFlowStatus } STATUS current DESCRIPTION "These objects are required for Systems sup- porting the Integrated Services Architecture." ::= { intSrvGroups 2 } END