Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
IPMROUTE-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Integer32, Counter32, Counter64, Gauge32,
IpAddress, TimeTicks FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION,
TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InterfaceIndexOrZero,
InterfaceIndex FROM IF-MIB
IANAipRouteProtocol,
IANAipMRouteProtocol FROM IANA-RTPROTO-MIB;
ipMRouteStdMIB MODULE-IDENTITY
LAST-UPDATED "200009220000Z" -- September 22, 2000
ORGANIZATION "IETF IDMR Working Group"
CONTACT-INFO
" Dave Thaler
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
US
Phone: +1 425 703 8835
EMail: dthaler@microsoft.com"
DESCRIPTION
"The MIB module for management of IP Multicast routing, but
independent of the specific multicast routing protocol in
use."
REVISION "200009220000Z" -- September 22, 2000
DESCRIPTION
"Initial version, published as RFC 2932."
::= { mib-2 83 }
-- Textual Conventions
LanguageTag ::= TEXTUAL-CONVENTION
DISPLAY-HINT "100a"
STATUS current
DESCRIPTION
"An RFC 1766-style language tag, with all alphabetic
characters converted to lowercase. This restriction is
intended to make the lexical ordering imposed by SNMP useful
when applied to language tags. Note that it is
theoretically possible for a valid language tag to exceed
the allowed length of this syntax, and thus be impossible to
represent with this syntax. Sampling of language tags in
current use on the Internet suggests that this limit does
not pose a serious problem in practice."
SYNTAX OCTET STRING (SIZE (1..100))
-- Top-level structure of the MIB
ipMRouteMIBObjects OBJECT IDENTIFIER ::= { ipMRouteStdMIB 1 }
ipMRoute OBJECT IDENTIFIER ::= { ipMRouteMIBObjects 1 }
-- the IP Multicast Routing MIB-Group
--
-- a collection of objects providing information about
-- IP Multicast Groups
ipMRouteEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled status of IP Multicast routing on this router."
::= { ipMRoute 1 }
ipMRouteEntryCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rows in the ipMRouteTable. This can be used
to monitor the multicast routing table size."
::= { ipMRoute 7 }
ipMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information for IP datagrams sent by particular sources to
the IP multicast groups known to this router."
::= { ipMRoute 2 }
ipMRouteEntry OBJECT-TYPE
SYNTAX IpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.
Discontinuities in counters in this entry can be detected by
observing the value of ipMRouteUpTime."
INDEX { ipMRouteGroup,
ipMRouteSource,
ipMRouteSourceMask }
::= { ipMRouteTable 1 }
IpMRouteEntry ::= SEQUENCE {
ipMRouteGroup IpAddress,
ipMRouteSource IpAddress,
ipMRouteSourceMask IpAddress,
ipMRouteUpstreamNeighbor IpAddress,
ipMRouteInIfIndex InterfaceIndexOrZero,
ipMRouteUpTime TimeTicks,
ipMRouteExpiryTime TimeTicks,
ipMRoutePkts Counter32,
ipMRouteDifferentInIfPackets Counter32,
ipMRouteOctets Counter32,
ipMRouteProtocol IANAipMRouteProtocol,
ipMRouteRtProto IANAipRouteProtocol,
ipMRouteRtAddress IpAddress,
ipMRouteRtMask IpAddress,
ipMRouteRtType INTEGER,
ipMRouteHCOctets Counter64
}
ipMRouteGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains multicast routing information."
::= { ipMRouteEntry 1 }
ipMRouteSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { ipMRouteEntry 2 }
ipMRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { ipMRouteEntry 3 }
ipMRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources to this multicast
address are received, or 0.0.0.0 if the upstream neighbor is
unknown (e.g., in CBT)."
::= { ipMRouteEntry 4 }
ipMRouteInIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface on which IP
datagrams sent by these sources to this multicast address
are received. A value of 0 indicates that datagrams are not
subject to an incoming interface check, but may be accepted
on multiple interfaces (e.g., in CBT)."
::= { ipMRouteEntry 5 }
ipMRouteUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { ipMRouteEntry 6 }
ipMRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out. The value 0 indicates that the entry is not
subject to aging."
::= { ipMRouteEntry 7 }
ipMRoutePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group
address."
::= { ipMRouteEntry 8 }
ipMRouteDifferentInIfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group address,
which were dropped because they were not received on the
interface indicated by ipMRouteInIfIndex. Packets which are
not subject to an incoming interface check (e.g., using CBT)
are not counted."
::= { ipMRouteEntry 9 }
ipMRouteOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router."
::= { ipMRouteEntry 10 }
ipMRouteProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast routing protocol via which this multicast
forwarding entry was learned."
::= { ipMRouteEntry 11 }
ipMRouteRtProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the route used to find the
upstream or parent interface for this multicast forwarding
entry was learned. Inclusion of values for routing
protocols is not intended to imply that those protocols need
be supported."
::= { ipMRouteEntry 12 }
ipMRouteRtAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { ipMRouteEntry 13 }
ipMRouteRtMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask associated with the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { ipMRouteEntry 14 }
ipMRouteRtType OBJECT-TYPE
SYNTAX INTEGER {
unicast (1), -- Unicast route used in multicast RIB
multicast (2) -- Multicast route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason the given route was placed in the (logical)
multicast Routing Information Base (RIB). A value of
unicast means that the route would normally be placed only
in the unicast RIB, but was placed in the multicast RIB
(instead or in addition) due to local configuration, such as
when running PIM over RIP. A value of multicast means that
the route was explicitly added to the multicast RIB by the
routing protocol, such as DVMRP or Multiprotocol BGP."
::= { ipMRouteEntry 15 }
ipMRouteHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router.
This object is a 64-bit version of ipMRouteOctets."
::= { ipMRouteEntry 16 }
--
-- The IP Multicast Routing Next Hop Table
--
ipMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on the next-
hops on outgoing interfaces for routing IP multicast
datagrams. Each entry is one of a list of next-hops on
outgoing interfaces for particular sources sending to a
particular multicast group address."
::= { ipMRoute 3 }
ipMRouteNextHopEntry OBJECT-TYPE
SYNTAX IpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the list of next-hops on
outgoing interfaces to which IP multicast datagrams from
particular sources to a IP multicast group address are
routed. Discontinuities in counters in this entry can be
detected by observing the value of ipMRouteUpTime."
INDEX { ipMRouteNextHopGroup, ipMRouteNextHopSource,
ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex,
ipMRouteNextHopAddress }
::= { ipMRouteNextHopTable 1 }
IpMRouteNextHopEntry ::= SEQUENCE {
ipMRouteNextHopGroup IpAddress,
ipMRouteNextHopSource IpAddress,
ipMRouteNextHopSourceMask IpAddress,
ipMRouteNextHopIfIndex InterfaceIndex,
ipMRouteNextHopAddress IpAddress,
ipMRouteNextHopState INTEGER,
ipMRouteNextHopUpTime TimeTicks,
ipMRouteNextHopExpiryTime TimeTicks,
ipMRouteNextHopClosestMemberHops Integer32,
ipMRouteNextHopProtocol IANAipMRouteProtocol,
ipMRouteNextHopPkts Counter32
}
ipMRouteNextHopGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group for which this entry specifies a
next-hop on an outgoing interface."
::= { ipMRouteNextHopEntry 1 }
ipMRouteNextHopSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRouteNextHopSourceMask identifies
the sources for which this entry specifies a next-hop on an
outgoing interface."
::= { ipMRouteNextHopEntry 2 }
ipMRouteNextHopSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRouteNextHopSource identifies the sources for
which this entry specifies a next-hop on an outgoing
interface."
::= { ipMRouteNextHopEntry 3 }
ipMRouteNextHopIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for the outgoing
interface for this next-hop."
::= { ipMRouteNextHopEntry 4 }
ipMRouteNextHopAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next-hop specific to this entry. For
most interfaces, this is identical to ipMRouteNextHopGroup.
NBMA interfaces, however, may have multiple next-hop
addresses out a single outgoing interface."
::= { ipMRouteNextHopEntry 5 }
ipMRouteNextHopState OBJECT-TYPE
SYNTAX INTEGER { pruned(1), forwarding(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP datagrams. The value 'forwarding' indicates it
is currently being used; the value 'pruned' indicates it is
not."
::= { ipMRouteNextHopEntry 6 }
ipMRouteNextHopUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { ipMRouteNextHopEntry 7 }
ipMRouteNextHopExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out. If ipMRouteNextHopState is pruned(1), the
remaining time until the prune expires and the state reverts
to forwarding(2). Otherwise, the remaining time until this
entry is removed from the table. The time remaining may be
copied from ipMRouteExpiryTime if the protocol in use for
this entry does not specify next-hop timers. The value 0
indicates that the entry is not subject to aging."
::= { ipMRouteNextHopEntry 8 }
ipMRouteNextHopClosestMemberHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of hops between this router and any
member of this IP multicast group reached via this next-hop
on this outgoing interface. Any IP multicast datagrams for
the group which have a TTL less than this number of hops
will not be forwarded to this next-hop."
::= { ipMRouteNextHopEntry 9 }
ipMRouteNextHopProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this next-hop was learned."
::= { ipMRouteNextHopEntry 10 }
ipMRouteNextHopPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which have been forwarded using this
route."
::= { ipMRouteNextHopEntry 11 }
--
-- The Multicast Routing Interface Table
--
ipMRouteInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information specific to interfaces."
::= { ipMRoute 4 }
ipMRouteInterfaceEntry OBJECT-TYPE
SYNTAX IpMRouteInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for a particular interface."
INDEX { ipMRouteInterfaceIfIndex }
::= { ipMRouteInterfaceTable 1 }
IpMRouteInterfaceEntry ::= SEQUENCE {
ipMRouteInterfaceIfIndex InterfaceIndex,
ipMRouteInterfaceTtl Integer32,
ipMRouteInterfaceProtocol IANAipMRouteProtocol,
ipMRouteInterfaceRateLimit Integer32,
ipMRouteInterfaceInMcastOctets Counter32,
ipMRouteInterfaceOutMcastOctets Counter32,
ipMRouteInterfaceHCInMcastOctets Counter64,
ipMRouteInterfaceHCOutMcastOctets Counter64
}
ipMRouteInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which this entry
contains information."
::= { ipMRouteInterfaceEntry 1 }
ipMRouteInterfaceTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the
interface."
::= { ipMRouteInterfaceEntry 2 }
ipMRouteInterfaceProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing protocol running on this interface."
::= { ipMRouteInterfaceEntry 3 }
ipMRouteInterfaceRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done."
DEFVAL { 0 }
::= { ipMRouteInterfaceEntry 4 }
ipMRouteInterfaceInMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is similar to ifInOctets in the Interfaces MIB, except that
only multicast packets are counted."
::= { ipMRouteInterfaceEntry 5 }
ipMRouteInterfaceOutMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface."
::= { ipMRouteInterfaceEntry 6 }
ipMRouteInterfaceHCInMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is a 64-bit version of ipMRouteInterfaceInMcastOctets. It
is similar to ifHCInOctets in the Interfaces MIB, except
that only multicast packets are counted."
::= { ipMRouteInterfaceEntry 7 }
ipMRouteInterfaceHCOutMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface. This object is a 64-bit version of
ipMRouteInterfaceOutMcastOctets."
::= { ipMRouteInterfaceEntry 8 }
--
-- The IP Multicast Scope Boundary Table
--
ipMRouteBoundaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteBoundaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's scoped
multicast address boundaries."
::= { ipMRoute 5 }
ipMRouteBoundaryEntry OBJECT-TYPE
SYNTAX IpMRouteBoundaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the ipMRouteBoundaryTable
representing a scoped boundary."
INDEX { ipMRouteBoundaryIfIndex, ipMRouteBoundaryAddress,
ipMRouteBoundaryAddressMask }
::= { ipMRouteBoundaryTable 1 }
IpMRouteBoundaryEntry ::= SEQUENCE {
ipMRouteBoundaryIfIndex InterfaceIndex,
ipMRouteBoundaryAddress IpAddress,
ipMRouteBoundaryAddressMask IpAddress,
ipMRouteBoundaryStatus RowStatus
}
ipMRouteBoundaryIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IfIndex value for the interface to which this boundary
applies. Packets with a destination address in the
associated address/mask range will not be forwarded out this
interface."
::= { ipMRouteBoundaryEntry 1 }
ipMRouteBoundaryAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address which when combined with the
corresponding value of ipMRouteBoundaryAddressMask
identifies the group range for which the scoped boundary
exists. Scoped addresses must come from the range 239.x.x.x
as specified in RFC 2365."
::= { ipMRouteBoundaryEntry 2 }
ipMRouteBoundaryAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address mask which when combined with the
corresponding value of ipMRouteBoundaryAddress identifies
the group range for which the scoped boundary exists."
::= { ipMRouteBoundaryEntry 3 }
ipMRouteBoundaryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { ipMRouteBoundaryEntry 4 }
--
-- The IP Multicast Scope Name Table
--
ipMRouteScopeNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteScopeNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the multicast scope names."
::= { ipMRoute 6 }
ipMRouteScopeNameEntry OBJECT-TYPE
SYNTAX IpMRouteScopeNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the ipMRouteScopeNameTable
representing a multicast scope name."
INDEX { ipMRouteScopeNameAddress,
ipMRouteScopeNameAddressMask,
IMPLIED ipMRouteScopeNameLanguage }
::= { ipMRouteScopeNameTable 1 }
IpMRouteScopeNameEntry ::= SEQUENCE {
ipMRouteScopeNameAddress IpAddress,
ipMRouteScopeNameAddressMask IpAddress,
ipMRouteScopeNameLanguage LanguageTag,
ipMRouteScopeNameString SnmpAdminString,
ipMRouteScopeNameDefault TruthValue,
ipMRouteScopeNameStatus RowStatus
}
ipMRouteScopeNameAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address which when combined with the
corresponding value of ipMRouteScopeNameAddressMask
identifies the group range associated with the multicast
scope. Scoped addresses must come from the range
239.x.x.x."
::= { ipMRouteScopeNameEntry 1 }
ipMRouteScopeNameAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address mask which when combined with the
corresponding value of ipMRouteScopeNameAddress identifies
the group range associated with the multicast scope."
::= { ipMRouteScopeNameEntry 2 }
ipMRouteScopeNameLanguage OBJECT-TYPE
SYNTAX LanguageTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RFC 1766-style language tag associated with the scope
name."
::= { ipMRouteScopeNameEntry 3 }
ipMRouteScopeNameString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The textual name associated with the multicast scope. The
value of this object should be suitable for displaying to
end-users, such as when allocating a multicast address in
this scope. When no name is specified, the default value of
this object should be the string 239.x.x.x/y with x and y
replaced appropriately to describe the address and mask
length associated with the scope."
::= { ipMRouteScopeNameEntry 4 }
ipMRouteScopeNameDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If true, indicates a preference that the name in the
following language should be used by applications if no name
is available in a desired language."
DEFVAL { false }
::= { ipMRouteScopeNameEntry 5 }
ipMRouteScopeNameStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { ipMRouteScopeNameEntry 6 }
-- conformance information
ipMRouteMIBConformance
OBJECT IDENTIFIER ::= { ipMRouteStdMIB 2 }
ipMRouteMIBCompliances
OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 1 }
ipMRouteMIBGroups OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 2 }
-- compliance statements
ipMRouteMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the IP Multicast MIB."
MODULE -- this module
MANDATORY-GROUPS { ipMRouteMIBBasicGroup,
ipMRouteMIBRouteGroup}
GROUP ipMRouteMIBBoundaryGroup
DESCRIPTION
"This group is mandatory if the router supports
administratively-scoped multicast address boundaries."
OBJECT ipMRouteBoundaryStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipMRouteScopeNameStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP ipMRouteMIBHCInterfaceGroup
DESCRIPTION
"This group is mandatory only for those network interfaces
for which the value of the corresponding instance of ifSpeed
is greater than 20,000,000 bits/second."
::= { ipMRouteMIBCompliances 1 }
-- units of conformance
ipMRouteMIBBasicGroup OBJECT-GROUP
OBJECTS { ipMRouteEnable, ipMRouteEntryCount,
ipMRouteUpstreamNeighbor, ipMRouteInIfIndex,
ipMRouteUpTime, ipMRouteExpiryTime,
ipMRouteNextHopState,
ipMRouteNextHopUpTime,
ipMRouteNextHopExpiryTime,
ipMRouteNextHopProtocol,
ipMRouteNextHopPkts,
ipMRouteInterfaceTtl,
ipMRouteInterfaceProtocol, ipMRouteInterfaceRateLimit,
ipMRouteInterfaceInMcastOctets,
ipMRouteInterfaceOutMcastOctets,
ipMRouteProtocol
}
STATUS current
DESCRIPTION
"A collection of objects to support basic management of IP
Multicast routing."
::= { ipMRouteMIBGroups 1 }
ipMRouteMIBHopCountGroup OBJECT-GROUP
OBJECTS { ipMRouteNextHopClosestMemberHops }
STATUS current
DESCRIPTION
"A collection of objects to support management of the use of
hop counts in IP Multicast routing."
::= { ipMRouteMIBGroups 2 }
ipMRouteMIBBoundaryGroup OBJECT-GROUP
OBJECTS { ipMRouteBoundaryStatus, ipMRouteScopeNameString,
ipMRouteScopeNameDefault, ipMRouteScopeNameStatus }
STATUS current
DESCRIPTION
"A collection of objects to support management of scoped
multicast address boundaries."
::= { ipMRouteMIBGroups 3 }
ipMRouteMIBPktsOutGroup OBJECT-GROUP
OBJECTS { ipMRouteNextHopPkts }
STATUS current
DESCRIPTION
"A collection of objects to support management of packet
counters for each outgoing interface entry of a route."
::= { ipMRouteMIBGroups 4 }
ipMRouteMIBHCInterfaceGroup OBJECT-GROUP
OBJECTS { ipMRouteInterfaceHCInMcastOctets,
ipMRouteInterfaceHCOutMcastOctets,
ipMRouteHCOctets }
STATUS current
DESCRIPTION
"A collection of objects providing information specific to
high speed (greater than 20,000,000 bits/second) network
interfaces."
::= { ipMRouteMIBGroups 5 }
ipMRouteMIBRouteGroup OBJECT-GROUP
OBJECTS { ipMRouteRtProto, ipMRouteRtAddress,
ipMRouteRtMask, ipMRouteRtType }
STATUS current
DESCRIPTION
"A collection of objects providing information on the
relationship between multicast routing information, and the
IP Forwarding Table."
::= { ipMRouteMIBGroups 6 }
ipMRouteMIBPktsGroup OBJECT-GROUP
OBJECTS { ipMRoutePkts, ipMRouteDifferentInIfPackets,
ipMRouteOctets }
STATUS current
DESCRIPTION
"A collection of objects to support management of packet
counters for each forwarding entry."
::= { ipMRouteMIBGroups 7 }
END