Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
IPOA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
transmission, Integer32, IpAddress, Counter32,
Gauge32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
ipNetToMediaNetAddress, ipNetToMediaIfIndex,
ipNetToMediaPhysAddress, ipAdEntAddr
FROM IP-MIB
-- The following textual conventions are defined locally within
-- this MIB module. They have been prefixed with 'Ipoa' to
-- distinguish them from their counterparts in the ATM-TC-MIB.
-- This was done so that the IPOA-MIB could be advanced as
-- a standards-based MIB without waiting for the ATM-TC-MIB.
-- AtmConnKind, AtmAddr
-- FROM ATM-TC-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
;
ipoaMIB MODULE-IDENTITY
LAST-UPDATED "9802090000Z" -- February 9, 1998
ORGANIZATION "IETF Internetworking Over NBMA Working
Group (ion)"
CONTACT-INFO
"Maria Greene (greene@xedia.com)
Xedia Corp.
Jim Luciani (jluciani@BayNetworks.com)
Bay Networks
Kenneth White (kennethw@vnet.ibm.com)
IBM Corp.
Ted Kuo (tkuo@eos.ncsu.edu)
Bay Networks"
DESCRIPTION
"This module defines a portion of the management
information base (MIB) for managing Classical IP and
ARP over ATM entities."
::= { transmission 46 }
-- Textual Conventions
IpoaEncapsType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The encapsulation type used on a VC."
SYNTAX INTEGER {
llcSnap(1),
vcMuxed(2),
other(3)
}
IpoaVpiInteger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer large enough to contain the value of a VPI."
SYNTAX Integer32 (0..255)
IpoaVciInteger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer large enough to contain the value of a VCI."
SYNTAX Integer32 (0..65535)
IpoaAtmAddr ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION
"The ATM address used by the network entity.
The semantics are implied by the length.
The address types are:
- no address (0 octets)
- E.164 (8 octets)
- NSAP (20 octets)
In addition, when subaddresses are used IpoaAtmAddr
may represent the concatenation of address and
subaddress. The associated address types are:
- E.164, E.164 (16 octets)
- E.164, NSAP (28 octets)
- NSAP, NSAP (40 octets)
Address lengths other than defined in this definition
imply address types defined elsewhere.
Note: The E.164 address is encoded in BCD format."
SYNTAX OCTET STRING (SIZE(0..40))
IpoaAtmConnKind ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The use of call control. The use is as follows:
pvc(1)
Virtual link of a PVC. Should not be
used in a PVC/SVC (i.e., SPVC)
crossconnect.
svcIncoming(2)
Virtual link established after a
received signaling request to setup
an SVC.
svcOutgoing(3)
Virtual link established after a
transmitted or forwarded signaling
request to setup an SVC.
spvcInitiator(4)
Virtual link at the PVC side of an
SVC/PVC crossconnect, where the
switch is the initiator of the SPVC
setup.
spvcTarget(5)
Virtual link at the PVC side of an
SVC/PVC crossconnect, where the
switch is the target of the SPVC
setup.
An spvcInitiator is always cross-connected to
an svcOutgoing, and an spvcTarget is always
cross-connected to an svcIncoming."
SYNTAX INTEGER {
pvc(1),
svcIncoming(2),
svcOutgoing(3),
spvcInitiator(4),
spvcTarget(5)
}
-- Top-level structure of the MIB
ipoaObjects OBJECT IDENTIFIER ::= { ipoaMIB 1 }
ipoaNotifications OBJECT IDENTIFIER ::= { ipoaMIB 2 }
ipoaConformance OBJECT IDENTIFIER ::= { ipoaMIB 3 }
-- MIB Objects
ipoaLisTrapEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether ipoaLisCreate and ipoaLisDelete
traps should be generated by this system.
By default, this object should have the value
enabled(1) for systems where ATMARP Servers are
present and disabled(2) on systems where only
clients reside."
::= { ipoaObjects 1 }
-- The ATM Logical IP Subnet (LIS) Table
ipoaLisTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaLisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for every Logical IP
Subnet (LIS) of which this system is a member.
The bulk of the objects in an ipoaLisEntry exists
to control ATMARP for a particular LIS. In a PVC only
environment it is implementation dependent as to
whether this table should be supported."
::= { ipoaObjects 2 }
ipoaLisEntry OBJECT-TYPE
SYNTAX IpoaLisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single LIS of which this system
is a member.
Membership in a LIS is independent of the actual ATM
interfaces being used. The ipoaLisTable defines
all LISs that a system is a member of. The ipAddrTable
and the ipoaClientTable provides the mapping from local
IP address to ATM interface. The ipoaLisIfMappingTable
provides the mappings between Logical IP Subnets and
interfaces.
The ipoaLisTable is indexed by ipoaLisSubnetAddr (IP
subnet address). An entry in the ipoaLisTable should
exist for each ipAddrEntry that is associated with an
ATM related interface used for Classical IP and ARP
over ATM traffic.
Its ipAdEntAddr and ipAdEntNetMask when ANDed together
should equal the ipoaLisSubnetAddr of the corresponding
ipoaLisEntry."
INDEX { ipoaLisSubnetAddr }
::= { ipoaLisTable 1 }
IpoaLisEntry ::= SEQUENCE {
ipoaLisSubnetAddr IpAddress,
ipoaLisDefaultMtu Integer32,
ipoaLisDefaultEncapsType IpoaEncapsType,
ipoaLisInactivityTimer Integer32,
ipoaLisMinHoldingTime Integer32,
ipoaLisQDepth Integer32,
ipoaLisMaxCalls Integer32,
ipoaLisCacheEntryAge Integer32,
ipoaLisRetries Integer32,
ipoaLisTimeout Integer32,
ipoaLisDefaultPeakCellRate Integer32,
ipoaLisActiveVcs Gauge32,
ipoaLisRowStatus RowStatus
}
ipoaLisSubnetAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet address associated with this LIS."
::= { ipoaLisEntry 1 }
ipoaLisDefaultMtu OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default MTU used within this LIS. Note that the
actual MTU used for a VC between two members of the
LIS may be negotiated during connection setup and may
be different than this value. The ipoaVcNegotiatedMtu
object indicates the actual MTU in use for a
particular VC."
DEFVAL { 9180 }
::= { ipoaLisEntry 2 }
ipoaLisDefaultEncapsType OBJECT-TYPE
SYNTAX IpoaEncapsType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default encapsulation to use on VCs created for
this LIS. Note that the actual encapsulation type may
be negotiated during connection setup and may be
different than this value. The
ipoaVcNegotiatedEncapsType object indicates the actual
encapsulation in use for a particular VC."
DEFVAL { llcSnap }
::= { ipoaLisEntry 3 }
ipoaLisInactivityTimer OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time, in seconds, before a call established for an
ipNetToMediaEntry on a client will timeout due to no
traffic being passed on the VC. A value of 0 implies
no time out."
REFERENCE
"RFC 1755, Sec. 3.4 VC Teardown"
DEFVAL { 1200 }
::= { ipoaLisEntry 4 }
ipoaLisMinHoldingTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum amount of time, in seconds, that a call
will remain open. If 0 then ipoaInactivityTimer will
completely determine when a call is terminated."
REFERENCE
"RFC 1755, Sec. 3.4 VC Teardown"
DEFVAL { 60 }
::= { ipoaLisEntry 5 }
ipoaLisQDepth OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "packets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of outstanding requests that are
allowed while waiting for ATMARP replies and
InATMARP replies for this LIS."
DEFVAL { 1 }
::= { ipoaLisEntry 6 }
ipoaLisMaxCalls OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of SVCs that can be established
simultaneously for this LIS."
DEFVAL { 500 }
::= { ipoaLisEntry 7 }
ipoaLisCacheEntryAge OBJECT-TYPE
SYNTAX Integer32 (60..1200)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time, in seconds, before an ipNetToMediaEntry will
age out of the table. Note that the default value will
be different for a client and a server. An ATMARP
Server should use a default of 1200 and a client should
use 900."
DEFVAL { 900 }
::= { ipoaLisEntry 8 }
ipoaLisRetries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of times the ATMARP request will be retried
when no response is received in the timeout interval
indicated by ipoaLisTimeout."
DEFVAL { 2 }
::= { ipoaLisEntry 9 }
ipoaLisTimeout OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time to wait, in seconds, before retransmission
of an ARP request."
DEFVAL { 10 }
::= { ipoaLisEntry 10 }
ipoaLisDefaultPeakCellRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the signalling parameter that
should be used when setting up all best effort
VCCs (Virtual Channel Connections).
This parameter applies to the forward and
backward direction on a per best effort VCC basis.
A value of zero implies that no configured default
exists and that local policy should be used to
determine the actual default to used during
call setup. ATM Signaling Support for IP over ATM
(RFC 1755) recommends 1/10th of the ATM interface's
speed."
::= { ipoaLisEntry 11 }
ipoaLisActiveVcs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active SVCs for this LIS."
::= { ipoaLisEntry 12 }
ipoaLisRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the ipoaLisTable.
When the ipoaLisRowStatus deleted (by setting this
object to destroy(6)), this has the side-effect of
removing all entries from the ipNetToMediaTable that
are associated with this LIS (in other words, it
flushes the entity's ATMARP cache). It also removes
the ipoaVcTable entries that were associated with those
ipNetToMediaTable entries. Destroying the row also
removes the corresponding entries in the
ipoaArpSrvrTable, ipoaArpClientTable,
ipoaLisIfMappingTable, and ipoaArpRemoteSrvrTable.
Entries in both the ipNetToMediaTable and the
ipoaVcTable that are associated with a
ipoaConfigPvcEntry are not affected by changes to
ipoaLisRowStatus."
REFERENCE
"RFC 1903, 'Textual Conventions for Version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { ipoaLisEntry 13 }
-- The ATM Logical IP Subnet Interface Mapping Table
ipoaLisIfMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaLisIfMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for every combination
of ipoaLisEntry and IP over ATM interface."
::= { ipoaObjects 3 }
ipoaLisIfMappingEntry OBJECT-TYPE
SYNTAX IpoaLisIfMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipoaLisIfMappingTable."
INDEX { ipoaLisSubnetAddr, ipoaLisIfMappingIfIndex }
::= { ipoaLisIfMappingTable 1 }
IpoaLisIfMappingEntry ::= SEQUENCE {
ipoaLisIfMappingIfIndex InterfaceIndex,
ipoaLisIfMappingRowStatus RowStatus
}
ipoaLisIfMappingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ipAdEntIfIndex object from an ipAddrEntry
is used as an index to this table when its
ipAdEntAddr is in the subnet implied by
ipoaLisSubnetAddr."
::= { ipoaLisIfMappingEntry 1 }
ipoaLisIfMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the ipoaLisIfMappingTable."
REFERENCE
"RFC 1903, 'Textual Conventions for Version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { ipoaLisIfMappingEntry 2 }
-- The ATMARP Client Table
ipoaArpClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaArpClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATMARP clients running on this system."
::= { ipoaObjects 4 }
ipoaArpClientEntry OBJECT-TYPE
SYNTAX IpoaArpClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single ATMARP Client. Clients
can be started and stopped by adding and removing
entries from this table. An entry in the
ipoaArpClientTable has a corresponding entry in the
ipAddrTable. Both are indexed by ipAdEntAddr.
The ifIndex and subnet mask of a client entry are the
ipAddrEntry's ipAdEntIfIndex and ipAdEntNetMask,
respectively.
Note that adding and removing entries from this table
may have the same effect on the corresponding
ipAddrTable entry. Row creation of an entry in this
table requires that either the corresponding ipAddrTable
entry exists or that ipAdEntIfIndex and ipAdEntNetMask
be specified in the creation of an ipoaArpClientEntry
at a minimum in order to create the corresponding
ipAddrEntry. Specification of ipAdEntBcastAddr and
ipAdEntReasmMaxSize to complete an ipAddrEntry is
implementation dependent.
Whether a corresponding ipAddrEntry is deleted during
the deletion of an ipoaArpClientEntry is considered
implementation dependent."
INDEX { ipAdEntAddr }
::= { ipoaArpClientTable 1 }
IpoaArpClientEntry ::= SEQUENCE {
ipoaArpClientAtmAddr IpoaAtmAddr,
ipoaArpClientSrvrInUse IpoaAtmAddr,
ipoaArpClientInArpInReqs Counter32,
ipoaArpClientInArpOutReqs Counter32,
ipoaArpClientInArpInReplies Counter32,
ipoaArpClientInArpOutReplies Counter32,
ipoaArpClientInArpInvalidInReqs Counter32,
ipoaArpClientInArpInvalidOutReqs Counter32,
ipoaArpClientArpInReqs Counter32,
ipoaArpClientArpOutReqs Counter32,
ipoaArpClientArpInReplies Counter32,
ipoaArpClientArpOutReplies Counter32,
ipoaArpClientArpInNaks Counter32,
ipoaArpClientArpOutNaks Counter32,
ipoaArpClientArpUnknownOps Counter32,
ipoaArpClientArpNoSrvrResps Counter32,
ipoaArpClientRowStatus RowStatus
}
ipoaArpClientAtmAddr OBJECT-TYPE
SYNTAX IpoaAtmAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ATM address of the client."
::= { ipoaArpClientEntry 1 }
ipoaArpClientSrvrInUse OBJECT-TYPE
SYNTAX IpoaAtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM address of the ATMARP Server,
ipoaArpRemoteSrvrAtmAddr, in use by this client. A
zero length octet string implies that communication
with a Remote ATMARP Server is not in effect."
DEFVAL { ''H }
::= { ipoaArpClientEntry 2 }
ipoaArpClientInArpInReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP requests received by this
client."
::= { ipoaArpClientEntry 3 }
ipoaArpClientInArpOutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP requests sent by this client."
::= { ipoaArpClientEntry 4 }
ipoaArpClientInArpInReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP replies received by this
client."
::= { ipoaArpClientEntry 5 }
ipoaArpClientInArpOutReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of InATMARP replies sent by this client."
::= { ipoaArpClientEntry 6 }
ipoaArpClientInArpInvalidInReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this client detected an
invalid InATMARP request."
::= { ipoaArpClientEntry 7 }
ipoaArpClientInArpInvalidOutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this client did not
receive an InATMARP reply."
::= { ipoaArpClientEntry 8 }
ipoaArpClientArpInReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ATMARP requests received by this
client."
::= { ipoaArpClientEntry 9 }
ipoaArpClientArpOutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ATMARP requests sent by this client."
::= { ipoaArpClientEntry 10 }
ipoaArpClientArpInReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ATMARP replies received by this
client."
::= { ipoaArpClientEntry 11 }
ipoaArpClientArpOutReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ATMARP replies sent by this client."
::= { ipoaArpClientEntry 12 }
ipoaArpClientArpInNaks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of negative ATMARP replies
received by this client."
::= { ipoaArpClientEntry 13 }
ipoaArpClientArpOutNaks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of negative ATMARP replies sent by
this client.
Classic IP and ARP over ATM does not require an
ATMARP client to transmit an ATMARP_NAK upon
receipt of an ATMARP request from another ATMARP
client. However, implementation experience has
shown that this error condition is somewhat easy
to create inadvertently by configuring one ATMARP
client with an ipoaArpRemoteSrvrTable entry
containing an ipoaArpRemoteSrvrAtmAddr value which
is the ATM address of another ATMARP client-only
system.
If an ATMARP client supports the transmission of
ATMARP_NAKs, then it should increment
ipoaArpClientArpOutNaks each time it transmits
an ATMARP_NAK. Otherwise, support of this
object is considered optional."
::= { ipoaArpClientEntry 14 }
ipoaArpClientArpUnknownOps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this client received
an ATMARP message with an operation code for which
it is not coded to support."
::= { ipoaArpClientEntry 15 }
ipoaArpClientArpNoSrvrResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this client failed to receive
a response from a ATMARP Server within the
ipoaLisTimeout value for ipoaLisRetries times.
This may imply that the client will re-elect a
new primary ATMARP Server for this LIS from the
ipoaArpRemoteSrvrTable."
::= { ipoaArpClientEntry 16 }
ipoaArpClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and
deleted from the ipoaArpClientTable."
REFERENCE
"RFC 1903, 'Textual Conventions for Version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { ipoaArpClientEntry 17 }
-- The ATMARP Server Table
ipoaArpSrvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaArpSrvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATMARP Servers running on this system."
::= { ipoaObjects 5 }
ipoaArpSrvrEntry OBJECT-TYPE
SYNTAX IpoaArpSrvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an ATMARP Server within a LIS. An
entry in this table has two indexes: first ipAdEntAddr,
which is the IP address that this system uses as a
member of the LIS, and then ipoaArpSrvrAddr, which is
the ATM address of the ATMARP Server.
Entries may be created by a management application
using the ipoaArpSrvrRowStatus object. Entries in this
table may also be created by the system and not by a
management application, for example via ILMI.
Entries in this table may be deleted by setting the
ipoaArpSrvrRowStatus object to 'destroy(6)'. This
includes entries that were added by the system and not
by a management application."
INDEX { ipAdEntAddr, ipoaArpSrvrAddr }
::= { ipoaArpSrvrTable 1 }
IpoaArpSrvrEntry ::= SEQUENCE {
ipoaArpSrvrAddr IpoaAtmAddr,
ipoaArpSrvrLis IpAddress,
ipoaArpSrvrInArpInReqs Counter32,
ipoaArpSrvrInArpOutReqs Counter32,
ipoaArpSrvrInArpInReplies Counter32,
ipoaArpSrvrInArpOutReplies Counter32,
ipoaArpSrvrInArpInvalidInReqs Counter32,
ipoaArpSrvrInArpInvalidOutReqs Counter32,
ipoaArpSrvrArpInReqs Counter32,
ipoaArpSrvrArpOutReplies Counter32,
ipoaArpSrvrArpOutNaks Counter32,
ipoaArpSrvrArpDupIpAddrs Counter32,
ipoaArpSrvrArpUnknownOps Counter32,
ipoaArpSrvrRowStatus RowStatus
}
ipoaArpSrvrAddr OBJECT-TYPE
SYNTAX IpoaAtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM address of the ATMARP Server."
::= { ipoaArpSrvrEntry 1 }
ipoaArpSrvrLis OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet address that identifies the LIS with
which this server is associated."
::= { ipoaArpSrvrEntry 2 }
ipoaArpSrvrInArpInReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP requests received by this
ATMARP Server."
::= { ipoaArpSrvrEntry 3 }
ipoaArpSrvrInArpOutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP requests sent by this ATMARP
Server."
::= { ipoaArpSrvrEntry 4 }
ipoaArpSrvrInArpInReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP replies received by this
ATMARP Server."
::= { ipoaArpSrvrEntry 5 }
ipoaArpSrvrInArpOutReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of InATMARP replies sent by this ATMARP
Server."
::= { ipoaArpSrvrEntry 6 }
ipoaArpSrvrInArpInvalidInReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid InATMARP requests received by
this ATMARP Server."
::= { ipoaArpSrvrEntry 7 }
ipoaArpSrvrInArpInvalidOutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this server did not receive
an InATMARP reply."
::= { ipoaArpSrvrEntry 8 }
ipoaArpSrvrArpInReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ATMARP requests received by this
ATMARP Server."
::= { ipoaArpSrvrEntry 9 }
ipoaArpSrvrArpOutReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ATMARP replies sent by this ATMARP
Server."
::= { ipoaArpSrvrEntry 10 }
ipoaArpSrvrArpOutNaks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of negative ATMARP replies sent by this
ATMARP Server."
::= { ipoaArpSrvrEntry 11 }
ipoaArpSrvrArpDupIpAddrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a duplicate IP address was
detected by this ATMARP Server."
::= { ipoaArpSrvrEntry 12 }
ipoaArpSrvrArpUnknownOps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this ATMARP Server received
an ATMARP message with an operation code for which it
is not coded to support."
::= { ipoaArpSrvrEntry 13 }
ipoaArpSrvrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
from the ipoaArpSrvrTable."
REFERENCE
"RFC 1903, 'Textual Conventions for Version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { ipoaArpSrvrEntry 14 }
-- The Remote ATMARP Server Table
ipoaArpRemoteSrvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaArpRemoteSrvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-local ATMARP Servers associated with a
LIS. An entry in this table has three indexes: first
the ipoaLisSubnetAddr of the LIS for which the
corresponding ATMARP Server provides ATMARP services,
then the ipoaArpRemoteSrvrAtmAddr, which is the ATM
address of the remote ATMARP Server, and finally the
ifIndex of the interface on which the VC to the ATMARP
Remote Server will be opened. An ifIndex value of 0
should be used when a single VC is to be shared for
ATMARP purposes by multiple interfaces."
::= { ipoaObjects 6 }
ipoaArpRemoteSrvrEntry OBJECT-TYPE
SYNTAX IpoaArpRemoteSrvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about one non-local ATMARP Server."
INDEX { ipoaLisSubnetAddr, ipoaArpRemoteSrvrAtmAddr,
ipoaArpRemoteSrvrIfIndex }
::= { ipoaArpRemoteSrvrTable 1 }
IpoaArpRemoteSrvrEntry ::= SEQUENCE {
ipoaArpRemoteSrvrAtmAddr IpoaAtmAddr,
ipoaArpRemoteSrvrRowStatus RowStatus,
ipoaArpRemoteSrvrIfIndex InterfaceIndexOrZero,
ipoaArpRemoteSrvrIpAddr IpAddress,
ipoaArpRemoteSrvrAdminStatus INTEGER,
ipoaArpRemoteSrvrOperStatus INTEGER
}
ipoaArpRemoteSrvrAtmAddr OBJECT-TYPE
SYNTAX IpoaAtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM address of the remote ATMARP Server."
::= { ipoaArpRemoteSrvrEntry 1 }
ipoaArpRemoteSrvrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
from the ipoaArpRemoteSrvrTable.
Deleting an ipoaArpRemoteSrvrEntry (by setting this
object to destroy(6)) may affect ipoaArpClientTable
entries. The object ipoaArpClientSrvrInUse in an
ipoaArpClientSrvrEntry may contain the ATM address
of an ATMARP Remote Server whose entry in the
ipoaArpRemoteSrvrTable is being removed. In this
case, any corresponding ipoaArpClientSrvrInUse
objects should be at a minimum invalidated by
setting their values to that of a zero length
OCTET STRING.
The value of ipoaArpRemoteSrvrOperStatus should be
consistent with that of ipoaArpRemoteSrvrRowStatus.
For example, successfully setting the value of
this object to notInService(2) after its being in
the up(1) state should result in
ipoaArpRemoteSrvrOperStatus being set to down(2)
if currently up(1)."
REFERENCE
"RFC 1903, 'Textual Conventions for Version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { ipoaArpRemoteSrvrEntry 2 }
ipoaArpRemoteSrvrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the interface that the VC to the
Remote ATMARP Server is associated with."
::= { ipoaArpRemoteSrvrEntry 3 }
ipoaArpRemoteSrvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Remote ATMARP Server. A
value of 0.0.0.0 implies that this address isn't
known."
DEFVAL { '00000000'H }
::= { ipoaArpRemoteSrvrEntry 4 }
ipoaArpRemoteSrvrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- use this ATMARP Server
down(2) -- stop using this ATMARP Server
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for use of the ATMARP Server
represented by an entry in this table.
ipoaArpRemoteSrvrAdminStatus values:
up(1) - Attempt to activate use of the
ATMARP Server represented by this
entry in the ipoaArpRemoteSrvrTable.
down(2) - Deactivate use of this ATMARP
Server.
When a managed system creates an entry in this
table ipoaArpRemoteSrvrAdminStatus and
ipoaArpRemoteSrvrOperStatus are initialized as
down(2) by default."
DEFVAL { down }
::= { ipoaArpRemoteSrvrEntry 5 }
ipoaArpRemoteSrvrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- eligible for use
down(2) -- not eligible for use
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state for use of a Remote
ATMARP Server. An up(1) entry has a VC
established to the respective Remote ATMARP
Server:
up(1) - A VC exists to Remote ATMARP Server
whose IP Address is stored in
ipoaArpRemoteSrvrIpAddr. This VC can
be determined by searching the
ipoaVcTable using
ipoaArpRemoteSrvrIfIndex (if not 0,
otherwise ignore ipNetToMediaIfIndex
index) and ipoaArpRemoteSrvrIpAddr.
An ipoaArpClientEntry should exist
with its ipoaArpClientSrvrInUse
object having the same value as
ipoaArpRemoteSrvrAtmAddr.
down(2) - Entry exists without an active VC to
the Remote ATMARP Server.
Transition from up(1) to down(2)
status may affect ipoaArpClientTable entries.
The object ipoaArpClientSrvrInUse in an
ipoaArpClientSrvrEntry may contain the ATM address
of an ATMARP Remote Server whose entry in the
ipoaArpRemoteSrvrTable is being deactivated. In
this case, any corresponding ipoaArpClientSrvrInUse
objects should be at a minimum invalidated by
setting their values to that of a zero length
OCTET STRING.
If ipoaArpRemoteSrvrAdminStatus is down(2) then
ipoaArpRemoteSrvrOperStatus should be down(2).
If ipoaArpRemoteSrvrAdminStatus is changed to
up(1) then ipoaArpRemoteSrvrOperStatus should
change to up(1) if the Remote ATMARP Server
entry can be activated."
DEFVAL { down }
::= { ipoaArpRemoteSrvrEntry 6 }
-- The ATM VC Table
ipoaVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaVcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A system that supports IP over ATM is an IP system and
therefore MUST support all of the appropriate tables in
the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233),
the IP-MIB (RFC 2011), the TCP-MIB (RFC 2012), and
the UDP-MIB (RFC 2013). This includes the
ipNetToMediaTable (the ARP cache) that is defined
within the IP-MIB (RFC 2011). The ipoaVcTable
keeps a set of VCs for each entry in the ARP cache
that was put there by an IP over ATM system acting
as either a host or server. The ipoaVcTable doesn't
augment the ipNetToMediaTable (ARP Cache) since the
the correspondence between tables is not necessarily
one-to-one.
An ipNetToMediaPhysAddress object should contain the
content as defined by the IpoaAtmAddr textual
convention when used to hold an IPOA-MIB ATM Address."
::= { ipoaObjects 7 }
ipoaVcEntry OBJECT-TYPE
SYNTAX IpoaVcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VC (permanent or switched) that this host or server
has opened with another member of a LIS. Additional
information can be determined about the VC from the
ATM-MIB.
Entries in this table cannot be created by management
applications.
In an SVC environment, an entry is automatically added
by the system as the result of ATMARP processing.
In a PVC environment, an entry is automatically added
to this table when an entry is created in the
ipoaConfigPvcTable and the IP Address at the remote
end of the PVC is discovered using InATMARP. An
entry also is added to the ipNetToMediaTable."
INDEX { ipNetToMediaIfIndex,
ipNetToMediaNetAddress,
ipoaVcVpi,
ipoaVcVci
}
::= { ipoaVcTable 1 }
IpoaVcEntry ::= SEQUENCE {
ipoaVcVpi IpoaVpiInteger,
ipoaVcVci IpoaVciInteger,
ipoaVcType IpoaAtmConnKind,
ipoaVcNegotiatedEncapsType IpoaEncapsType,
ipoaVcNegotiatedMtu Integer32 }
ipoaVcVpi OBJECT-TYPE
SYNTAX IpoaVpiInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPI value for the Virtual Circuit."
::= { ipoaVcEntry 1 }
ipoaVcVci OBJECT-TYPE
SYNTAX IpoaVciInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VCI value for the Virtual Circuit."
::= { ipoaVcEntry 2 }
ipoaVcType OBJECT-TYPE
SYNTAX IpoaAtmConnKind
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the Virtual Circuit."
::= { ipoaVcEntry 3 }
ipoaVcNegotiatedEncapsType OBJECT-TYPE
SYNTAX IpoaEncapsType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation type used when communicating over
this circuit."
::= { ipoaVcEntry 4 }
ipoaVcNegotiatedMtu OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MTU used when communicating over this circuit."
::= { ipoaVcEntry 5 }
-- The ATM Config PVC Table
ipoaConfigPvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpoaConfigPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table MUST be supported when PVCs are intended to
be supported in order to enable the setup of PVCs for
use by IP."
::= { ipoaObjects 8 }
ipoaConfigPvcEntry OBJECT-TYPE
SYNTAX IpoaConfigPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a single PVC that exists at this host for
use by IP."
INDEX { ipoaConfigPvcIfIndex,
ipoaConfigPvcVpi,
ipoaConfigPvcVci
}
::= { ipoaConfigPvcTable 1 }
IpoaConfigPvcEntry ::= SEQUENCE {
ipoaConfigPvcIfIndex InterfaceIndex,
ipoaConfigPvcVpi IpoaVpiInteger,
ipoaConfigPvcVci IpoaVciInteger,
ipoaConfigPvcDefaultMtu Integer32,
ipoaConfigPvcRowStatus RowStatus }
ipoaConfigPvcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the ATM Interface that this PVC
is associated with."
::= { ipoaConfigPvcEntry 1 }
ipoaConfigPvcVpi OBJECT-TYPE
SYNTAX IpoaVpiInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPI value for the Virtual Circuit."
::= { ipoaConfigPvcEntry 2 }
ipoaConfigPvcVci OBJECT-TYPE
SYNTAX IpoaVciInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VCI value for the Virtual Circuit."
::= { ipoaConfigPvcEntry 3 }
ipoaConfigPvcDefaultMtu OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Classical IP and ARP over ATM allows use of
other MTU values for PVCs but considers how a
value other than 9180 could be selected to be out
of scope. ipoaConfigPvcDefaultMtu can be used to
configure the MTU to be used for the PVC.
Both ends MUST have the same value configured."
DEFVAL { 9180 }
::= { ipoaConfigPvcEntry 4 }
ipoaConfigPvcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows rows to be created and deleted in
the ipoaConfigPvcTable. Creation of an entry in this
table should eventually result in the creation of an
ipNetToMediaEntry and a corresponding ipoaVcEntry
after InATMARP has determined the destination address
of the remote system that the PVC is connected to.
Setting this object to destroy(6) should remove the
corresponding ipNetToMediaTable and ipoaVcTable
entries."
REFERENCE
"RFC 1903, 'Textual Conventions for Version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { ipoaConfigPvcEntry 5 }
-- Notifications
ipoaTrapPrefix OBJECT IDENTIFIER ::= { ipoaNotifications 0 }
ipoaMtuExceeded NOTIFICATION-TYPE
OBJECTS {
ipoaVcNegotiatedMtu
}
STATUS current
DESCRIPTION
"A frame was received that exceeds the negotiated
MTU size. The VPI and VCI of the VC for which this
condition was detected can be determined from the
index values for ipoaVcNegotiatedMtu. In addition,
the ifIndex and IP Address can be determined as
well (refer to the ipoaVcTable)."
::= { ipoaTrapPrefix 1 }
ipoaDuplicateIpAddress NOTIFICATION-TYPE
OBJECTS {
ipNetToMediaIfIndex,
ipNetToMediaNetAddress,
ipNetToMediaPhysAddress,
ipNetToMediaPhysAddress
}
STATUS current
DESCRIPTION
"The ATMARP Server has detected more than one ATM end
point attempting to associate the same IP address with
different ATM addresses."
::= { ipoaTrapPrefix 2 }
ipoaLisCreate NOTIFICATION-TYPE
OBJECTS {
ipoaLisSubnetAddr
}
STATUS current
DESCRIPTION
"Generation of this trap occurs when an ipoaLisEntry is
created while the ipoaLisTrapEnable.0 object has the
value enabled(1)."
::= { ipoaTrapPrefix 3 }
ipoaLisDelete NOTIFICATION-TYPE
OBJECTS {
ipoaLisSubnetAddr
}
STATUS current
DESCRIPTION
"Generation of this trap occurs when an ipoaLisEntry is
deleted while the ipoaLisTrapEnable.0 object has the
value enabled(1)."
::= { ipoaTrapPrefix 4 }
-- Conformance Definitions
ipoaGroups OBJECT IDENTIFIER ::= { ipoaConformance 1 }
ipoaCompliances OBJECT IDENTIFIER ::= { ipoaConformance 2 }
-- compliance statements
ipoaCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that support the
IPOA-MIB."
MODULE -- this module
MANDATORY-GROUPS { ipoaGeneralGroup,
ipoaBasicNotificationsGroup
}
GROUP ipoaClientGroup
DESCRIPTION
"This group is mandatory for all hosts where IP
over ATM client support is present."
GROUP ipoaSrvrGroup
DESCRIPTION
"This group is mandatory for all hosts where ATMARP
Servers are present."
GROUP ipoaSrvrNotificationsGroup
DESCRIPTION
"This group is mandatory for all hosts where ATMARP
Servers are present."
GROUP ipoaLisNotificationsGroup
DESCRIPTION
"This group is mandatory for all hosts where
ATMARP client only support is present and
ipoaLisTrapEnable is allowed to be set to
enabled(1)."
GROUP ipoaLisTableGroup
DESCRIPTION
"This group is mandatory for all entities which
support IP over ATM SVCs. Support of objects in
this group by IP over ATM clients which only
support IP over ATM PVCs is optional."
OBJECT ipoaLisDefaultMtu
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to allow the user
to change the default MTU from the value 9180.
The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisDefaultEncapsType
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to allow the user to
specify the default encapsulation type for the
LIS.
The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisInactivityTimer
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisMinHoldingTime
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisQDepth
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisMaxCalls
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisCacheEntryAge
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisRetries
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to allow the user
to change the default number of times an ATMARP
request will be retried when no response is
received from the default of 2.
The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisTimeout
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to allow the user
to change the default retransmission time from
the default of 10 seconds.
The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisDefaultPeakCellRate
MIN-ACCESS read-only
DESCRIPTION
"Implementations that do not support IP over
ATM SVC usage are not required to allow the
user to specify a best effort default peak cell
rate since typically the ipoaLisTable won't
exist.
The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisIfMappingRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT ipoaArpClientAtmAddr
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaArpSrvrLis
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaArpRemoteSrvrAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security. In this case the value of
this object should be up(1) when a VC
exists to the Remote ATMARP Server or
otherwise down(2), and the agent should not
allow a SET operation to this object."
OBJECT ipoaConfigPvcDefaultMtu
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object in the absence of
adequate security."
OBJECT ipoaLisRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT ipoaArpClientRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT ipoaArpRemoteSrvrRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT ipoaArpSrvrRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT ipoaConfigPvcRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT ipoaArpClientArpOutNaks
MIN-ACCESS not-accessible
DESCRIPTION
"Classic IP and ARP over ATM does not require
an ATMARP client to transmit an ATMARP_NAK
upon receipt of an ATMARP request from another
ATMARP client. This object should be
implemented when an ATMARP client supports the
transmission of ATMARP_NAKs."
::= { ipoaCompliances 1 }
-- units of conformance
ipoaGeneralGroup OBJECT-GROUP
OBJECTS {
ipoaVcType,
ipoaVcNegotiatedEncapsType,
ipoaVcNegotiatedMtu,
ipoaConfigPvcDefaultMtu,
ipoaConfigPvcRowStatus
}
STATUS current
DESCRIPTION
"This group is mandatory for all IP over ATM entities."
::= { ipoaGroups 1 }
ipoaClientGroup OBJECT-GROUP
OBJECTS {
ipoaArpClientAtmAddr,
ipoaArpClientSrvrInUse,
ipoaArpClientInArpInReqs,
ipoaArpClientInArpOutReqs,
ipoaArpClientInArpInReplies,
ipoaArpClientInArpOutReplies,
ipoaArpClientInArpInvalidInReqs,
ipoaArpClientInArpInvalidOutReqs,
ipoaArpClientArpInReqs,
ipoaArpClientArpOutReqs,
ipoaArpClientArpInReplies,
ipoaArpClientArpOutReplies,
ipoaArpClientArpInNaks,
ipoaArpClientArpOutNaks,
ipoaArpClientArpUnknownOps,
ipoaArpClientArpNoSrvrResps,
ipoaArpClientRowStatus
}
STATUS current
DESCRIPTION
"This group is mandatory for all hosts where an IP
over ATM client is present."
::= { ipoaGroups 2 }
ipoaSrvrGroup OBJECT-GROUP
OBJECTS {
ipoaArpSrvrLis,
ipoaArpSrvrInArpInReqs,
ipoaArpSrvrInArpOutReqs,
ipoaArpSrvrInArpInReplies,
ipoaArpSrvrInArpOutReplies,
ipoaArpSrvrInArpInvalidInReqs,
ipoaArpSrvrInArpInvalidOutReqs,
ipoaArpSrvrArpInReqs,
ipoaArpSrvrArpOutReplies,
ipoaArpSrvrArpOutNaks,
ipoaArpSrvrArpDupIpAddrs,
ipoaArpSrvrArpUnknownOps,
ipoaArpSrvrRowStatus
}
STATUS current
DESCRIPTION
"This group is mandatory for all hosts where ATMARP
Servers are present."
::= { ipoaGroups 3 }
ipoaBasicNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ipoaMtuExceeded
}
STATUS current
DESCRIPTION
"The notification which an IP over ATM entity
is required to implement."
::= { ipoaGroups 4 }
ipoaSrvrNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ipoaDuplicateIpAddress
}
STATUS current
DESCRIPTION
"The notification which an IP over ATM ATMARP
Server is required to implement."
::= { ipoaGroups 5 }
ipoaLisNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ipoaLisCreate,
ipoaLisDelete
}
STATUS current
DESCRIPTION
"The LIS-related notifications which are required
to be implemented by an IP over ATM ATMARP server,
as well as by any IP over ATM client which allows
ipoaLisTrapEnable to be set to enabled(1)."
::= { ipoaGroups 6 }
ipoaLisTableGroup OBJECT-GROUP
OBJECTS {
ipoaLisTrapEnable,
ipoaLisSubnetAddr,
ipoaLisDefaultMtu,
ipoaLisDefaultEncapsType,
ipoaLisInactivityTimer,
ipoaLisMinHoldingTime,
ipoaLisQDepth,
ipoaLisMaxCalls,
ipoaLisCacheEntryAge,
ipoaLisRetries,
ipoaLisTimeout,
ipoaLisDefaultPeakCellRate,
ipoaLisActiveVcs,
ipoaLisRowStatus,
ipoaLisIfMappingRowStatus,
ipoaArpRemoteSrvrRowStatus,
ipoaArpRemoteSrvrIpAddr,
ipoaArpRemoteSrvrAdminStatus,
ipoaArpRemoteSrvrOperStatus
}
STATUS current
DESCRIPTION
"This group is mandatory for all entities which
support IP over ATM SVCs. Support of objects in
this group by IP over ATM clients which only
support IP over ATM PVCs is optional."
::= { ipoaGroups 7 }
END