Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
MPLS-LC-FR-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus, StorageType
FROM SNMPv2-TC
mplsInterfaceIndex
FROM MPLS-LSR-STD-MIB
DLCI
FROM FRAME-RELAY-DTE-MIB
mplsStdMIB
FROM MPLS-TC-STD-MIB
;
mplsLcFrStdMIB MODULE-IDENTITY
LAST-UPDATED "200601120000Z" -- 12 January 2006
ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
" Thomas D. Nadeau
Cisco Systems, Inc.
Email: tnadeau@cisco.com
Subrahmanya Hegde
Email: subrah@cisco.com
General comments should be sent to mpls@uu.net
"
DESCRIPTION
"This MIB module contains managed object definitions for
MPLS Label-Controlled Frame-Relay interfaces as defined
in (RFC3034).
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFC 4368; see
the RFC itself for full legal notices."
-- Revision history.
REVISION
"200601120000Z" -- 12 January 2006
DESCRIPTION
"Initial revision, published as part of RFC 4368."
::= { mplsStdMIB 10 }
-- Top level components of this MIB module.
-- Tables, Scalars, Notifications, Conformance
mplsLcFrStdNotifications OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 0 }
mplsLcFrStdObjects OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 1 }
mplsLcFrStdConformance OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 2 }
-- MPLS LC-FR Interface Configuration Table.
mplsLcFrStdInterfaceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLcFrStdInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS LC-FR
capability and associated information. In particular,
this table sparsely extends the MPLS-LSR-STD-MIB's
mplsInterfaceConfTable."
::= { mplsLcFrStdObjects 1 }
mplsLcFrStdInterfaceConfEntry OBJECT-TYPE
SYNTAX MplsLcFrStdInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every interface capable of supporting MPLS LC-FR.
Each entry in this table will exist only if a
corresponding entry in ifTable and mplsInterfaceConfTable
exists. If the associated entries in ifTable and
mplsInterfaceConfTable are deleted, the corresponding
entry in this table must also be deleted shortly
thereafter."
INDEX { mplsInterfaceIndex }
::= { mplsLcFrStdInterfaceConfTable 1 }
MplsLcFrStdInterfaceConfEntry ::= SEQUENCE {
mplsLcFrStdTrafficMinDlci DLCI,
mplsLcFrStdTrafficMaxDlci DLCI,
mplsLcFrStdCtrlMinDlci DLCI,
mplsLcFrStdCtrlMaxDlci DLCI,
mplsLcFrStdInterfaceConfRowStatus RowStatus,
mplsLcFrStdInterfaceConfStorageType StorageType
}
mplsLcFrStdTrafficMinDlci OBJECT-TYPE
SYNTAX DLCI
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the minimum DLCI value over which this
LSR is willing to accept traffic on this
interface."
::= { mplsLcFrStdInterfaceConfEntry 1 }
mplsLcFrStdTrafficMaxDlci OBJECT-TYPE
SYNTAX DLCI
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the max DLCI value over which this
LSR is willing to accept traffic on this
interface."
::= { mplsLcFrStdInterfaceConfEntry 2 }
mplsLcFrStdCtrlMinDlci OBJECT-TYPE
SYNTAX DLCI
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the min DLCI value over which this
LSR is willing to accept control traffic
on this interface."
::= { mplsLcFrStdInterfaceConfEntry 3 }
mplsLcFrStdCtrlMaxDlci OBJECT-TYPE
SYNTAX DLCI
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the max DLCI value over which this
LSR is willing to accept control traffic
on this interface."
::= { mplsLcFrStdInterfaceConfEntry 4 }
mplsLcFrStdInterfaceConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create and
delete entries in this table. When configuring
entries in this table, the corresponding ifEntry and
mplsInterfaceConfEntry MUST exist beforehand. If a manager
attempts to create an entry for a corresponding
mplsInterfaceConfEntry that does not support LC-FR,
the agent MUST return an inconsistentValue error.
If this table is implemented read-only, then the
agent must set this object to active(1) when this
row is made active. If this table is implemented
writable, then an agent MUST not allow modification
to its objects once this value is set to active(1),
except to mplsLcFrStdInterfaceConfRowStatus and
mplsLcFrStdInterfaceConfStorageType."
::= { mplsLcFrStdInterfaceConfEntry 5 }
mplsLcFrStdInterfaceConfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row."
DEFVAL { nonVolatile }
::= { mplsLcFrStdInterfaceConfEntry 6 }
-- End of mplsLcFrStdInterfaceConfTable
-- Module compliance.
mplsLcFrStdCompliances
OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 1 }
mplsLcFrStdGroups
OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 2 }
-- Compliance requirement for full compliance
mplsLcFrStdModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide
full support for MPLS-LC-FR-STD-MIB. Such
devices can be monitored and also be configured
using this MIB module."
MODULE -- this module
MANDATORY-GROUPS {
mplsLcFrStdIfGroup
}
OBJECT mplsLcFrStdInterfaceConfRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is
not required."
::= { mplsLcFrStdCompliances 1 }
-- Compliance requirement for read-only implementations.
mplsLcFrStdModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that only
provide read-only support for MPLS-LC-FR-STD-MIB.
Such devices can be monitored but cannot be configured
using this MIB module.
"
MODULE -- this module
MANDATORY-GROUPS {
mplsLcFrStdIfGroup
}
-- mplsLcFrStdInterfaceConfTable
OBJECT mplsLcFrStdTrafficMinDlci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcFrStdTrafficMaxDlci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcFrStdCtrlMinDlci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcFrStdCtrlMaxDlci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcFrStdInterfaceConfRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsLcFrStdInterfaceConfStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mplsLcFrStdCompliances 2 }
-- Units of conformance.
mplsLcFrStdIfGroup OBJECT-GROUP
OBJECTS {
mplsLcFrStdTrafficMinDlci,
mplsLcFrStdTrafficMaxDlci,
mplsLcFrStdCtrlMinDlci,
mplsLcFrStdCtrlMaxDlci,
mplsLcFrStdInterfaceConfRowStatus,
mplsLcFrStdInterfaceConfStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS LC-FR
interface configuration."
::= { mplsLcFrStdGroups 1 }
END