Sh3ll
OdayForums


Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory :  /usr/share/mibs/ietf/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Current File : //usr/share/mibs/ietf/POLICY-BASED-MANAGEMENT-MIB
POLICY-BASED-MANAGEMENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Gauge32, Unsigned32,
    mib-2                                       FROM SNMPv2-SMI
    RowStatus, RowPointer, TEXTUAL-CONVENTION,
    DateAndTime, StorageType                    FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP,
    NOTIFICATION-GROUP                          FROM SNMPv2-CONF
    SnmpAdminString                             FROM SNMP-FRAMEWORK-MIB;

--  Policy-Based Management MIB

pmMib MODULE-IDENTITY
    LAST-UPDATED "200502070000Z"  -- February 7, 2005
    ORGANIZATION "IETF SNMP Configuration Working Group"
    CONTACT-INFO
        "




        Steve Waldbusser
        Phone: +1-650-948-6500
        Fax:   +1-650-745-0671
        Email: waldbusser@nextbeacon.com

        Jon Saperia (WG Co-chair)
        JDS Consulting, Inc.
        84 Kettell Plain Road.
        Stow MA 01775
        USA
        Phone: +1-978-461-0249
        Fax:   +1-617-249-0874
        Email: saperia@jdscons.com

        Thippanna Hongal
        Riverstone Networks, Inc.
        5200 Great America Parkway
        Santa Clara, CA, 95054
        USA

        Phone: +1-408-878-6562
        Fax:   +1-408-878-6501
        Email: hongal@riverstonenet.com

        David Partain (WG Co-chair)
        Postal: Ericsson AB
                P.O. Box 1248
                SE-581 12 Linkoping
                Sweden
        Tel: +46 13 28 41 44
        E-mail: David.Partain@ericsson.com

        Any questions or comments about this document can also be
        directed to the working group at snmpconf@snmp.com."
    DESCRIPTION
        "The MIB module for policy-based configuration of SNMP
        infrastructures.

        Copyright (C) The Internet Society (2005).  This version of
        this MIB module is part of RFC 4011; see the RFC itself for
        full legal notices."

    REVISION "200502070000Z"    -- February 7, 2005
    DESCRIPTION
        "The original version of this MIB, published as RFC4011."
    ::= { mib-2 124 }





PmUTF8String ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "An octet string containing information typically in
        human-readable form.

        To facilitate internationalization, this
        information is represented by using the ISO/IEC
        IS 10646-1 character set, encoded as an octet
        string using the UTF-8 transformation format
        described in RFC 3629.

        As additional code points are added by
        amendments to the 10646 standard from time
        to time, implementations must be prepared to
        encounter any code point from 0x00000000 to
        0x10FFFF.  Byte sequences that do not
        correspond to the valid UTF-8 encoding of a
        code point or that are outside this range are
        prohibited.

        The use of control codes should be avoided.

        When it is necessary to represent a newline,
        the control code sequence CR LF should be used.

        For code points not directly supported by user
        interface hardware or software, an alternative
        means of entry and display, such as hexadecimal,
        may be provided.

        For information encoded in 7-bit US-ASCII,
        the UTF-8 encoding is identical to the
        US-ASCII encoding.

        UTF-8 may require multiple bytes to represent a
        single character/code point; thus, the length
        of this object in octets may be different from
        the number of characters encoded.  Similarly,
        size constraints refer to the number of encoded
        octets, not the number of characters represented
        by an encoding.

        Note that when this TC is used for an object
        used or envisioned to be used as an index, then
        a SIZE restriction MUST be specified so that the
        number of sub-identifiers for any object instance
        does not exceed the limit of 128, as defined by



        RFC 3416.

        Note that the size of PmUTF8String object is
        measured in octets, not characters."
       SYNTAX       OCTET STRING (SIZE (0..65535))

-- The policy table

pmPolicyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmPolicyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The policy table.  A policy is a pairing of a
        policyCondition and a policyAction that is used to apply the
        action to a selected set of elements."
    ::= { pmMib 1 }

pmPolicyEntry OBJECT-TYPE
    SYNTAX      PmPolicyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the policy table representing one policy."
    INDEX { pmPolicyAdminGroup, pmPolicyIndex }
    ::= { pmPolicyTable 1 }

PmPolicyEntry ::= SEQUENCE {
    pmPolicyAdminGroup            PmUTF8String,
    pmPolicyIndex                 Unsigned32,
    pmPolicyPrecedenceGroup       PmUTF8String,
    pmPolicyPrecedence            Unsigned32,
    pmPolicySchedule              Unsigned32,
    pmPolicyElementTypeFilter     PmUTF8String,
    pmPolicyConditionScriptIndex  Unsigned32,
    pmPolicyActionScriptIndex     Unsigned32,
    pmPolicyParameters            OCTET STRING,
    pmPolicyConditionMaxLatency   Unsigned32,
    pmPolicyActionMaxLatency      Unsigned32,
    pmPolicyMaxIterations         Unsigned32,
    pmPolicyDescription           PmUTF8String,
    pmPolicyMatches               Gauge32,
    pmPolicyAbnormalTerminations  Gauge32,
    pmPolicyExecutionErrors       Counter32,
    pmPolicyDebugging             INTEGER,
    pmPolicyAdminStatus           INTEGER,
    pmPolicyStorageType           StorageType,
    pmPolicyRowStatus             RowStatus



}

pmPolicyAdminGroup OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An administratively assigned string that can be used to group
        policies for convenience, for readability, or to simplify
        configuration of access control.

        The value of this string does not affect policy processing in
        any way.  If grouping is not desired or necessary, this object
        may be set to a zero-length string."
    ::= { pmPolicyEntry 1 }

pmPolicyIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A unique index for this policy entry, unique among all
         policies regardless of administrative group."
    ::= { pmPolicyEntry 2 }

pmPolicyPrecedenceGroup OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "An administratively assigned string that is used to group
        policies.  For each element, only one policy in the same
        precedence group may be active on that element.  If multiple
        policies would be active on an element (because their
        conditions return non-zero), the execution environment will
        only allow the policy with the highest value of
        pmPolicyPrecedence to be active.

        All values of this object must have been successfully
        transformed by Stringprep RFC 3454.  Management stations
        must perform this translation and must only set this object to
        string values that have been transformed."
    ::= { pmPolicyEntry 3 }

pmPolicyPrecedence OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current



    DESCRIPTION
        "If, while checking to see which policy conditions match an
        element, 2 or more ready policies in the same precedence group
        match the same element, the pmPolicyPrecedence object provides
        the rule to arbitrate which single policy will be active on
        'this element'.  Of policies in the same precedence group, only
        the ready and matching policy with the highest precedence
        value (e.g., 2 is higher than 1) will have its policy action
        periodically executed on 'this element'.

        When a policy is active on an element but the condition ceases
        to match the element, its action (if currently running) will
        be allowed to finish and then the condition-matching ready
        policy with the next-highest precedence will immediately
        become active (and have its action run immediately).  If the
        condition of a higher-precedence ready policy suddenly begins
        matching an element, the previously-active policy's action (if
        currently running) will be allowed to finish and then the
        higher precedence policy will immediately become active.  Its
        action will run immediately, and any lower-precedence matching
        policy will not be active anymore.

        In the case where multiple ready policies share the highest
        value, it is an implementation-dependent matter as to which
        single policy action will be chosen.

        Note that if it is necessary to take certain actions after a
        policy is no longer active on an element, these actions should
        be included in a lower-precedence policy that is in the same
        precedence group."
    ::= { pmPolicyEntry 4 }

pmPolicySchedule OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "This policy will be ready if any of the associated schedule
         entries are active.

         If the value of this object is 0, this policy is always
         ready.

         If the value of this object is non-zero but doesn't
         refer to a schedule group that includes an active schedule,
         then the policy will not be ready, even if this is due to a
         misconfiguration of this object or the pmSchedTable."
    ::= { pmPolicyEntry 5 }



pmPolicyElementTypeFilter OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..128))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the element types for which this policy
        can be executed.

        The format of this object will be a sequence of
        pmElementTypeRegOIDPrefix values, encoded in the following
        BNF form:

        elementTypeFilter:   oid [ ';' oid ]*
                      oid:   subid [ '.' subid ]*
                    subid:   '0' | decimal_constant

        For example, to register for the policy to be run on all
        interface elements, the 'ifEntry' element type will be
        registered as '1.3.6.1.2.1.2.2.1'.

        If a value is included that does not represent a registered
        pmElementTypeRegOIDPrefix, then that value will be ignored."
    ::= { pmPolicyEntry 6 }

pmPolicyConditionScriptIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "A pointer to the row or rows in the pmPolicyCodeTable that
         contain the condition code for this policy.  When a policy
         entry is created, a pmPolicyCodeIndex value unused by this
         policy's adminGroup will be assigned to this object.

         A policy condition is one or more PolicyScript statements
         that result(s) in a boolean value that represents whether
         an element is a member of a set of elements upon which an
         action is to be performed.  If a policy is ready and the
         condition returns true for an element of a proper element
         type, and if no higher-precedence policy should be active,
         then the policy is active on that element.

         Condition evaluation stops immediately when any run-time
         exception is detected, and the policyAction is not executed.

         The policyCondition is evaluated for various elements.  Any
         element for which the policyCondition returns any nonzero value
         will match the condition and will have the associated



         policyAction executed on that element unless a
         higher-precedence policy in the same precedence group also
         matches 'this element'.

         If the condition object is empty (contains no code) or
         otherwise does not return a value, the element will not be
         matched.

         When this condition is executed, if SNMP requests are made to
         the local system and secModel/secName/secLevel aren't
         specified, access to objects is under the security
         credentials of the requester who most recently modified the
         associated pmPolicyAdminStatus object.  If SNMP requests are
         made in which secModel/secName/secLevel are specified, then
         the specified credentials are retrieved from the local
         configuration datastore only if VACM is configured to
         allow access to the requester who most recently modified the
         associated pmPolicyAdminStatus object.  See the Security
         Considerations section for more information."
    ::= { pmPolicyEntry 7 }

pmPolicyActionScriptIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "A pointer to the row or rows in the pmPolicyCodeTable that
         contain the action code for this policy.  When a policy entry
         is created, a pmPolicyCodeIndex value unused by this policy's
         adminGroup will be assigned to this object.

         A PolicyAction is an operation performed on a
         set of elements for which the policy is active.

         Action evaluation stops immediately when any run-time
         exception is detected.

         When this condition is executed, if SNMP requests are made to
         the local system and secModel/secName/secLevel aren't
         specified, access to objects is under the security
         credentials of the requester who most recently modified the
         associated pmPolicyAdminStatus object.  If SNMP requests are
         made in which secModel/secName/secLevel are specified, then
         the specified credentials are retrieved from the local
         configuration datastore only if VACM is configured to
         allow access to the requester who most recently modified the
         associated pmPolicyAdminStatus object.  See the Security
         Considerations section for more information."



    ::= { pmPolicyEntry 8 }

pmPolicyParameters OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..65535))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "From time to time, policy scripts may seek one or more
        parameters (e.g., site-specific constants).  These parameters
        may be installed with the script in this object and are
        accessible to the script via the getParameters() function.  If
        it is necessary for multiple parameters to be passed to the
        script, the script can choose whatever encoding/delimiting
        mechanism is most appropriate."
    ::= { pmPolicyEntry 9 }

pmPolicyConditionMaxLatency OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Every element under the control of this agent is
        re-checked periodically to see whether it is under control
        of this policy by re-running the condition for this policy.
        This object lets the manager control the maximum amount of
        time that may pass before an element is re-checked.

        In other words, in any given interval of this duration, all
        elements must be re-checked.  Note that how the policy agent
        schedules the checking of various elements within this
        interval is an implementation-dependent matter.
        Implementations may wish to re-run a condition more
        quickly if they note a change to the role strings for an
        element."
    ::= { pmPolicyEntry 10 }

pmPolicyActionMaxLatency OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Every element that matches this policy's condition and is
        therefore under control of this policy will have this policy's
        action executed periodically to ensure that the element
        remains in the state dictated by the policy.
        This object lets the manager control the maximum amount of



        time that may pass before an element has the action run on
        it.

        In other words, in any given interval of this duration, all
        elements under control of this policy must have the action run
        on them.  Note that how the policy agent schedules the policy
        action on various elements within this interval is an
        implementation-dependent matter."
    ::= { pmPolicyEntry 11 }

pmPolicyMaxIterations OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "If a condition or action script iterates in loops too many
        times in one invocation, the execution environment may
        consider it in an infinite loop or otherwise not acting
        as intended and may be terminated by the execution
        environment.  The execution environment will count the
        cumulative number of times all 'for' or 'while' loops iterated
        and will apply a threshold to determine when to terminate the
        script.  What threshold the execution environment uses is an
        implementation-dependent manner, but the value of
        this object SHOULD be the basis for choosing the threshold for
        each script.  The value of this object represents a
        policy-specific threshold and can be tuned for policies of
        varying workloads.  If this value is zero, no
        threshold will be enforced except for any
        implementation-dependent maximum.  Regardless of this value,
        the agent is allowed to terminate any script invocation that
        exceeds a local CPU or memory limitation.

        Note that the condition and action invocations are tracked
        separately."
    ::= { pmPolicyEntry 12 }

pmPolicyDescription OBJECT-TYPE
    SYNTAX      PmUTF8String
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "A description of this rule and its significance, typically
         provided by a human."
    ::= { pmPolicyEntry 13 }

pmPolicyMatches OBJECT-TYPE
    SYNTAX      Gauge32



    UNITS       "elements"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The number of elements that, in their most recent execution
         of the associated condition, were matched by the condition."
    ::= { pmPolicyEntry 14 }

pmPolicyAbnormalTerminations OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "elements"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The number of elements that, in their most recent execution
         of the associated condition or action, have experienced a
         run-time exception and terminated abnormally.  Note that if a
         policy was experiencing a run-time exception while processing
         a particular element but runs normally on a subsequent
         invocation, this number can decline."
    ::= { pmPolicyEntry 15 }

pmPolicyExecutionErrors OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "errors"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The total number of times that execution of this policy's
         condition or action has been terminated due to run-time
         exceptions."
    ::= { pmPolicyEntry 16 }

pmPolicyDebugging OBJECT-TYPE
    SYNTAX      INTEGER {
                    off(1),
                    on(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The status of debugging for this policy.  If this is turned
         on(2), log entries will be created in the pmDebuggingTable
         for each run-time exception that is experienced by this
         policy."
    DEFVAL { off }
    ::= { pmPolicyEntry 17 }




pmPolicyAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    disabled(1),
                    enabled(2),
                    enabledAutoRemove(3)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The administrative status of this policy.

         The policy will be valid only if the associated
         pmPolicyRowStatus is set to active(1) and this object is set
         to enabled(2) or enabledAutoRemove(3).

         If this object is set to enabledAutoRemove(3), the next time
         the associated schedule moves from the active state to the
         inactive state, this policy will immediately be deleted,
         including any associated entries in the pmPolicyCodeTable.

         The following related objects may not be changed unless this
         object is set to disabled(1):
             pmPolicyPrecedenceGroup, pmPolicyPrecedence,
             pmPolicySchedule, pmPolicyElementTypeFilter,
             pmPolicyConditionScriptIndex, pmPolicyActionScriptIndex,
             pmPolicyParameters, and any pmPolicyCodeTable row
             referenced by this policy.
         In order to change any of these parameters, the policy must
         be moved to the disabled(1) state, changed, and then
         re-enabled.

         When this policy moves to either enabled state from the
         disabled state, any cached values of policy condition must be
         erased, and any Policy or PolicyElement scratchpad values for
         this policy should be removed.  Policy execution will begin by
         testing the policy condition on all appropriate elements."
    ::= { pmPolicyEntry 18 }

pmPolicyStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this policy and any associated
         entries in the pmPolicyCodeTable are kept in volatile storage
         and lost upon reboot or if this row is backed up by
         non-volatile or permanent storage.




         If the value of this object is 'permanent', the values for
         the associated pmPolicyAdminStatus object must remain
         writable."
    ::= { pmPolicyEntry 19 }

pmPolicyRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The row status of this pmPolicyEntry.

         The status may not be set to active if any of the related
         entries in the pmPolicyCode table do not have a status of
         active or if any of the objects in this row are not set to
         valid values.  Only the following objects may be modified
         while in the active state:
             pmPolicyParameters
             pmPolicyConditionMaxLatency
             pmPolicyActionMaxLatency
             pmPolicyDebugging
             pmPolicyAdminStatus

         If this row is deleted, any associated entries in the
         pmPolicyCodeTable will be deleted as well."
    ::= { pmPolicyEntry 20 }

-- Policy Code Table

pmPolicyCodeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmPolicyCodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The pmPolicyCodeTable stores the code for policy conditions and
        actions.

        An example of the relationships between the code table and the
        policy table follows:

        pmPolicyTable
            AdminGroup  Index   ConditionScriptIndex  ActionScriptIndex
        A   ''          1       1                     2
        B   'oper'      1       1                     2
        C   'oper'      2       3                     4

        pmPolicyCodeTable
        AdminGroup  ScriptIndex  Segment    Note



        ''          1            1          Filter for policy A
        ''          2            1          Action for policy A
        'oper'      1            1          Filter for policy B
        'oper'      2            1          Action 1/2 for policy B
        'oper'      2            2          Action 2/2 for policy B
        'oper'      3            1          Filter for policy C
        'oper'      4            1          Action for policy C

        In this example, there are 3 policies: 1 in the '' adminGroup,
        and 2 in the 'oper' adminGroup.  Policy A has been assigned
        script indexes 1 and 2 (these script indexes are assigned out of
        a separate pool per adminGroup), with 1 code segment each for
        the filter and the action.  Policy B has been assigned script
        indexes 1 and 2 (out of the pool for the 'oper' adminGroup).
        While the filter has 1 segment, the action is longer and is
        loaded into 2 segments.  Finally, Policy C has been assigned
        script indexes 3 and 4, with 1 code segment each for the filter
        and the action."
    ::= { pmMib 2 }

pmPolicyCodeEntry OBJECT-TYPE
    SYNTAX      PmPolicyCodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the policy code table representing one code
        segment.  Entries that share a common AdminGroup/ScriptIndex
        pair make up a single script.  Valid values of ScriptIndex are
        retrieved from pmPolicyConditionScriptIndex and
        pmPolicyActionScriptIndex after a pmPolicyEntry is
        created.  Segments of code can then be written to this table
        with the learned ScriptIndex values.

        The StorageType of this entry is determined by the value of
        the associated pmPolicyStorageType.

        The pmPolicyAdminGroup element of the index represents the
        administrative group of the policy of which this code entry is
        a part."
    INDEX { pmPolicyAdminGroup, pmPolicyCodeScriptIndex,
            pmPolicyCodeSegment }
    ::= { pmPolicyCodeTable 1 }

PmPolicyCodeEntry ::= SEQUENCE {
    pmPolicyCodeScriptIndex    Unsigned32,
    pmPolicyCodeSegment        Unsigned32,
    pmPolicyCodeText           PmUTF8String,
    pmPolicyCodeStatus         RowStatus



}

pmPolicyCodeScriptIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A unique index for each policy condition or action.  The code
         for each such condition or action may be composed of multiple
         entries in this table if the code cannot fit in one entry.
         Values of pmPolicyCodeScriptIndex may not be used unless
         they have previously been assigned in the
         pmPolicyConditionScriptIndex or pmPolicyActionScriptIndex
         objects."
    ::= { pmPolicyCodeEntry 1 }

pmPolicyCodeSegment OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A unique index for each segment of a policy condition or
         action.

         When a policy condition or action spans multiple entries in
         this table, the code of that policy starts from the
         lowest-numbered segment and continues with increasing segment
         values until it ends with the highest-numbered segment."
    ::= { pmPolicyCodeEntry 2 }

pmPolicyCodeText OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (1..1024))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "A segment of policy code (condition or action).  Lengthy
         Policy conditions or actions may be stored in multiple
         segments in this table that share the same value of
         pmPolicyCodeScriptIndex.  When multiple segments are used, it
         is recommended that each segment be as large as is practical.

         Entries in this table are associated with policies by values
         of the pmPolicyConditionScriptIndex and
         pmPolicyActionScriptIndex objects.  If the status of the
         related policy is active, then this object may not be
         modified."
    ::= { pmPolicyCodeEntry 3 }




pmPolicyCodeStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The status of this code entry.

         Entries in this table are associated with policies by values
         of the pmPolicyConditionScriptIndex and
         pmPolicyActionScriptIndex objects.  If the status of the
         related policy is active, then this object can not be
         modified (i.e., deleted or set to notInService), nor may new
         entries be created.

         If the status of this object is active, no objects in this
         row may be modified."
    ::= { pmPolicyCodeEntry 4 }

-- Element Type Registration Table

pmElementTypeRegTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmElementTypeRegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A registration table for element types managed by this
        system.

        The Element Type Registration table allows the manager to
        learn what element types are being managed by the system and
        to register new types, if necessary.  An element type is
        registered by providing the OID of an SNMP object (i.e.,
        without the instance).  Each SNMP instance that exists under
        that object is a distinct element.  The index of the element is
        the index part of the discovered OID.  This index will be
        supplied to policy conditions and actions so that this code
        can inspect and configure the element.

        For example, this table might contain the following entries.
        The first three are agent-installed, and the 4th was
        downloaded by a management station:

  OIDPrefix        MaxLatency  Description               StorageType
  ifEntry          100 mS      interfaces - builtin      readOnly
  0.0              100 mS      system element - builtin  readOnly
  frCircuitEntry   100 mS      FR Circuits - builtin     readOnly
  hrSWRunEntry     60 sec      Running Processes         volatile




        Note that agents may automatically configure elements in this
        table for frequently used element types (interfaces, circuits,
        etc.).  In particular, it may configure elements for whom
        discovery is optimized in one or both of the following ways:

        1. The agent may discover elements by scanning internal data
           structures as opposed to issuing local SNMP requests.  It is
           possible to recreate the exact semantics described in this
           table even if local SNMP requests are not issued.

        2. The agent may receive asynchronous notification of new
           elements (for example, 'card inserted') and use that
           information to instantly create elements rather than
           through polling.  A similar feature might be available for
           the deletion of elements.

        Note that the disposition of agent-installed entries is
        described by the pmPolicyStorageType object."
    ::= { pmMib 3 }

pmElementTypeRegEntry OBJECT-TYPE
    SYNTAX      PmElementTypeRegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A registration of an element type.

        Note that some values of this table's index may result in an
        instance name that exceeds a length of 128 sub-identifiers,
        which exceeds the maximum for the SNMP protocol.
        Implementations should take care to avoid such values."
    INDEX       { pmElementTypeRegOIDPrefix }
    ::= { pmElementTypeRegTable 1 }

PmElementTypeRegEntry ::= SEQUENCE {
    pmElementTypeRegOIDPrefix     OBJECT IDENTIFIER,
    pmElementTypeRegMaxLatency    Unsigned32,
    pmElementTypeRegDescription   PmUTF8String,
    pmElementTypeRegStorageType   StorageType,
    pmElementTypeRegRowStatus     RowStatus
}

pmElementTypeRegOIDPrefix OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This OBJECT IDENTIFIER value identifies a table in which all



        elements of this type will be found.  Every row in the
        referenced table will be treated as an element for the
        period of time that it remains in the table.  The agent will
        then execute policy conditions and actions as appropriate on
        each of these elements.

        This object identifier value is specified down to the 'entry'
        component (e.g., ifEntry) of the identifier.

        The index of each discovered row will be passed to each
        invocation of the policy condition and policy action.

        The actual mechanism by which instances are discovered is
        implementation dependent.  Periodic walks of the table to
        discover the rows in the table is one such mechanism.  This
        mechanism has the advantage that it can be performed by an
        agent with no knowledge of the names, syntax, or semantics
        of the MIB objects in the table.  This mechanism also serves as
        the reference design.  Other implementation-dependent
        mechanisms may be implemented that are more efficient (perhaps
        because they are hard coded) or that don't require polling.
        These mechanisms must discover the same elements as would the
        table-walking reference design.

        This object can contain a OBJECT IDENTIFIER, '0.0'.
        '0.0' represents the single instance of the system
        itself and provides an execution context for policies to
        operate on the 'system element' and on MIB objects
        modeled as scalars.  For example, '0.0' gives an execution
        context for policy-based selection of the operating system
        code version (likely modeled as a scalar MIB object).  The
        element type '0.0' always exists; as a consequence, no actual
        discovery will take place, and the pmElementTypeRegMaxLatency
        object will have no effect for the '0.0' element
        type.  However, if the '0.0' element type is not registered in
        the table, policies will not be executed on the '0.0' element.

        When a policy is invoked on behalf of a '0.0' entry in this
        table, the element name will be '0.0', and there is no index
        of 'this element' (in other words, it has zero length).

        As this object is used in the index for the
        pmElementTypeRegTable, users of this table should be careful
        not to create entries that would result in instance names with
        more than 128 sub-identifiers."
    ::= { pmElementTypeRegEntry 2 }





pmElementTypeRegMaxLatency OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The PM agent is responsible for discovering new elements of
        types that are registered.  This object lets the manager
        control the maximum amount of time that may pass between the
        time an element is created and when it is discovered.

        In other words, in any given interval of this duration, all
        new elements must be discovered.  Note that how the policy
        agent schedules the checking of various elements within this
        interval is an implementation-dependent matter."
    ::= { pmElementTypeRegEntry 3 }

pmElementTypeRegDescription OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A descriptive label for this registered type."
    ::= { pmElementTypeRegEntry 4 }

pmElementTypeRegStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this row is kept
         in volatile storage and lost upon reboot or
         backed up by non-volatile or permanent storage.

         If the value of this object is 'permanent', no values in the
         associated row have to be writable."
    ::= { pmElementTypeRegEntry 5 }

pmElementTypeRegRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this registration entry.

        If the value of this object is active, no objects in this row
        may be modified."
    ::= { pmElementTypeRegEntry 6 }



-- Role Table

pmRoleTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmRoleEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The pmRoleTable is a read-create table that organizes role
        strings sorted by element.  This table is used to create and
        modify role strings and their associations, as well as to allow
        a management station to learn about the existence of roles and
        their associations.

        It is the responsibility of the agent to keep track of any
        re-indexing of the underlying SNMP elements and to continue to
        associate role strings with the element with which they were
        initially configured.

        Policy MIB agents that have elements in multiple local SNMP
        contexts have to allow some roles to be assigned to elements
        in particular contexts.  This is particularly true when some
        elements have the same names in different contexts and the
        context is required to disambiguate them.  In those situations,
        a value for the pmRoleContextName may be provided.  When a
        pmRoleContextName value is not provided, the assignment is to
        the element in the default context.

        Policy MIB agents that discover elements on other systems and
        execute policies on their behalf need to have access to role
        information for these remote elements.  In such situations,
        role assignments for other systems can be stored in this table
        by providing values for the pmRoleContextEngineID parameters.

    For example:
    Example:
    element       role    context ctxEngineID   #comment
    ifindex.1     gold                          local, default context
    ifindex.2     gold                          local, default context
    repeaterid.1  foo     rptr1                 local, rptr1 context
    repeaterid.1  bar     rptr2                 local, rptr2 context
    ifindex.1     gold    ''      A             different system
    ifindex.1     gold    ''      B             different system

         The agent must store role string associations in non-volatile
         storage."
    ::= { pmMib 4 }





pmRoleEntry OBJECT-TYPE
    SYNTAX      PmRoleEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A role string entry associates a role string with an
         individual element.

         Note that some combinations of index values may result in an
         instance name that exceeds a length of 128 sub-identifiers,
         which exceeds the maximum for the SNMP
         protocol.  Implementations should take care to avoid such
         combinations."
    INDEX       { pmRoleElement, pmRoleContextName,
                  pmRoleContextEngineID, pmRoleString }
    ::= { pmRoleTable 1 }

PmRoleEntry ::= SEQUENCE {
    pmRoleElement          RowPointer,
    pmRoleContextName      SnmpAdminString,
    pmRoleContextEngineID  OCTET STRING,
    pmRoleString           PmUTF8String,
    pmRoleStatus           RowStatus
}

pmRoleElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element with which this role string is associated.

         For example, if the element is interface 3, then this object
         will contain the OID for 'ifIndex.3'.

         If the agent assigns new indexes in the MIB table to
         represent the same underlying element (re-indexing), the
         agent will modify this value to contain the new index for the
         underlying element.

         As this object is used in the index for the pmRoleTable,
         users of this table should be careful not to create entries
         that would result in instance names with more than 128
         sub-identifiers."
    ::= { pmRoleEntry 1 }






pmRoleContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context.  If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmRoleEntry 2 }

pmRoleContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system.  This object contains
        the contextEngineID of the system for which this role string
        assignment is valid.  If the element is on the local system
        this object will be the empty string."
    ::= { pmRoleEntry 3 }

pmRoleString OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..64))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The role string that is associated with an element through
         this table.  All role strings must have been successfully
         transformed by Stringprep RFC 3454.  Management stations
         must perform this translation and must only set this object
         to string values that have been transformed.

         A role string is an administratively specified characteristic
         of a managed element (for example, an interface).  It is a
         selector for policy rules, that determines the applicability of
         the rule to a particular managed element."
    ::= { pmRoleEntry 4 }

pmRoleStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The status of this role string.





         If the value of this object is active, no object in this row
         may be modified."
    ::= { pmRoleEntry 5 }

-- Capabilities table

pmCapabilitiesTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmCapabilitiesEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmCapabilitiesTable contains a description of
         the inherent capabilities of the system so that
         management stations can learn of an agent's capabilities and
         differentially install policies based on the capabilities.

         Capabilities are expressed at the system level.  There can be
         variation in how capabilities are realized from one vendor or
         model to the next.  Management systems should consider these
         differences before selecting which policy to install in a
         system."
    ::= { pmMib 5 }

pmCapabilitiesEntry OBJECT-TYPE
    SYNTAX      PmCapabilitiesEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A capabilities entry holds an OID indicating support for a
         particular capability.  Capabilities may include hardware and
         software functions and the implementation of MIB
         Modules.  The semantics of the OID are defined in the
         description of pmCapabilitiesType.

         Entries appear in this table if any element in the system has
         a specific capability.  A capability should appear in this
         table only once, regardless of the number of elements in the
         system with that capability.  An entry is removed from this
         table when the last element in the system that has the
         capability is removed.  In some cases, capabilities are
         dynamic and exist only in software.  This table should have an
         entry for the capability even if there are no current
         instances.  Examples include systems with database or WEB
         services.  While the system has the ability to create new
         databases or WEB services, the entry should exist.  In these
         cases, the ability to create these services could come from
         other processes that are running in the system, even though
         there are no currently open databases or WEB servers running.



         Capabilities may include the implementation of MIB Modules
         but need not be limited to those that represent MIB Modules
         with one or more configurable objects.  It may also be
         valuable to include entries for capabilities that do not
         include configuration objects, as that information, in
         combination with other entries in this table, might be used
         by the management software to determine whether to
         install a policy.

         Vendor software may also add entries in this table to express
         capabilities from their private branch.

         Note that some values of this table's index may result in an
         instance name that exceeds a length of 128 sub-identifiers,
         which exceeds the maximum for the SNMP
         protocol.  Implementations should take care to avoid such
         values."
    INDEX       { pmCapabilitiesType }
    ::= { pmCapabilitiesTable 1 }

PmCapabilitiesEntry ::= SEQUENCE {
    pmCapabilitiesType               OBJECT IDENTIFIER
}

pmCapabilitiesType OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "There are three types of OIDs that may be present in the
         pmCapabilitiesType object:

         1) The OID of a MODULE-COMPLIANCE macro that represents the
         highest level of compliance realized by the agent for that
         MIB Module.  For example, an agent that implements the OSPF
         MIB Module at the highest level of compliance would have the
         value of '1.3.6.1.2.1.14.15.2' in the pmCapabilitiesType
         object.  For software that realizes standard MIB
         Modules that do not have compliance statements, the base OID
         of the MIB Module should be used instead.  If the OSPF MIB
         Module had not been created with a compliance statement, then
         the correct value of the pmCapabilitiesType would be
         '1.3.6.1.2.1.14'.  In the cases where multiple compliance
         statements in a MIB Module are supported by the agent, and
         where one compliance statement does not by definition include
         the other, each of the compliance OIDs would have entries in
         this table.




         MIB Documents can contain more than one MIB Module.  In the
         case of OSPF, there is a second MIB Module
         that describes notifications for the OSPF Version 2 Protocol.
         If the agent also realizes these functions, an entry will
         also exist for those capabilities in this table.

         2) Vendors should install OIDs in this table that represent
         vendor-specific capabilities.  These capabilities can be
         expressed just as those described above for MIB Modules on
         the standards track.  In addition, vendors may install any
         OID they desire from their registered branch.  The OIDs may be
         at any level of granularity, from the root of their entire
         branch to an instance of a single OID.  There is no
         restriction on the number of registrations they may make,
         though care should be taken to avoid unnecessary entries.

         3) OIDs that represent one capability or a collection of
         capabilities that could be any collection of MIB Objects or
         hardware or software functions may be created in working
         groups and registered in a MIB Module.  Other entities (e.g.,
         vendors) may also make registrations.  Software will register
         these standard capability OIDs, as well as vendor specific
         OIDs.

         If the OID for a known capability is not present in the
         table, then it should be assumed that the capability is not
         implemented.

         As this object is used in the index for the
         pmCapabilitiesTable, users of this table should be careful
         not to create entries that would result in instance names
         with more than 128 sub-identifiers."
    ::= { pmCapabilitiesEntry 1 }

-- Capabilities override table

pmCapabilitiesOverrideTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmCapabilitiesOverrideEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmCapabilitiesOverrideTable allows management stations
         to override pmCapabilitiesTable entries that have been
         registered by the agent.  This facility can be used to avoid
         situations in which managers in the network send policies to
         a system that has advertised a capability in the
         pmCapabilitiesTable but that should not be installed on this
         particular system.  One example could be newly deployed



         equipment that is still in a trial state in a trial state or
         resources reserved for some other administrative reason.
         This table can also be used to override entries in the
         pmCapabilitiesTable through the use of the
         pmCapabilitiesOverrideState object.  Capabilities can also be
         declared available in this table that were not registered in
         the pmCapabilitiesTable.  A management application can make
         an entry in this table for any valid OID and declare the
         capability available by setting the
         pmCapabilitiesOverrideState for that row to valid(1)."
    ::= { pmMib 6 }

pmCapabilitiesOverrideEntry OBJECT-TYPE
    SYNTAX      PmCapabilitiesOverrideEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in this table indicates whether a particular
         capability is valid or invalid.

         Note that some values of this table's index may result in an
         instance name that exceeds a length of 128 sub-identifiers,
         which exceeds the maximum for the SNMP
         protocol.  Implementations should take care to avoid such
         values."
    INDEX       { pmCapabilitiesOverrideType }
    ::= { pmCapabilitiesOverrideTable 1 }

PmCapabilitiesOverrideEntry ::= SEQUENCE {
    pmCapabilitiesOverrideType               OBJECT IDENTIFIER,
    pmCapabilitiesOverrideState              INTEGER,
    pmCapabilitiesOverrideRowStatus          RowStatus
}

pmCapabilitiesOverrideType OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "This is the OID of the capability that is declared valid or
         invalid by the pmCapabilitiesOverrideState value for this
         row.  Any valid OID, as described in the pmCapabilitiesTable,
         is permitted in the pmCapabilitiesOverrideType object.  This
         means that capabilities can be expressed at any level, from a
         specific instance of an object to a table or entire module.
         There are no restrictions on whether these objects are from
         standards track MIB documents or in the private branch of the
         MIB.



         If an entry exists in this table for which there is a
         corresponding entry in the pmCapabilitiesTable, then this entry
         shall have precedence over the entry in the
         pmCapabilitiesTable.  All entries in this table must be
         preserved across reboots.

         As this object is used in the index for the
         pmCapabilitiesOverrideTable, users of this table should be
         careful not to create entries that would result in instance
         names with more than 128 sub-identifiers."
    ::= { pmCapabilitiesOverrideEntry 1 }

pmCapabilitiesOverrideState OBJECT-TYPE
    SYNTAX      INTEGER {
                    invalid(1),
                    valid(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "A pmCapabilitiesOverrideState of invalid indicates that
         management software should not send policies to this system
         for the capability identified in the
         pmCapabilitiesOverrideType for this row of the table.  This
         behavior is the same whether the capability represented by
         the pmCapabilitiesOverrideType exists only in this table
         (that is, it was installed by an external management
         application) or exists in this table as well as the
         pmCapabilitiesTable.  This would be the case when a manager
         wanted to disable a capability that the native management
         system found and registered in the pmCapabilitiesTable.

         An entry in this table that has a pmCapabilitiesOverrideState
         of valid should be treated as though it appeared in the
         pmCapabilitiesTable.  If the entry also exists in the
         pmCapabilitiesTable in the pmCapabilitiesType object, and if
         the value of this object is valid, then the system shall
         operate as though this entry did not exist and policy
         installations and executions will continue in a normal
         fashion."
    ::= { pmCapabilitiesOverrideEntry 2 }

pmCapabilitiesOverrideRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The row status of this pmCapabilitiesOverrideEntry.



         If the value of this object is active, no object in this row
         may be modified."
    ::= { pmCapabilitiesOverrideEntry 3 }

-- The Schedule Group

pmSchedLocalTime OBJECT-TYPE
    SYNTAX      DateAndTime (SIZE (11))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The local time used by the scheduler.  Schedules that
         refer to calendar time will use the local time indicated
         by this object.  An implementation MUST return all 11 bytes
         of the DateAndTime textual-convention so that a manager
         may retrieve the offset from GMT time."
    ::= { pmMib 7 }

--
-- The schedule table that controls the scheduler.
--

pmSchedTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmSchedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines schedules for policies."
    ::= { pmMib 8 }

pmSchedEntry OBJECT-TYPE
    SYNTAX      PmSchedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry describing a particular schedule.

        Unless noted otherwise, writable objects of this row can be
        modified independently of the current value of pmSchedRowStatus,
        pmSchedAdminStatus and pmSchedOperStatus.  In particular, it
        is legal to modify pmSchedWeekDay, pmSchedMonth, and
        pmSchedDay when pmSchedRowStatus is active."
    INDEX { pmSchedIndex }
    ::= { pmSchedTable 1 }







PmSchedEntry ::= SEQUENCE {
    pmSchedIndex          Unsigned32,
    pmSchedGroupIndex     Unsigned32,
    pmSchedDescr          PmUTF8String,
    pmSchedTimePeriod     PmUTF8String,
    pmSchedMonth          BITS,
    pmSchedDay            BITS,
    pmSchedWeekDay        BITS,
    pmSchedTimeOfDay      PmUTF8String,
    pmSchedLocalOrUtc     INTEGER,
    pmSchedStorageType    StorageType,
    pmSchedRowStatus      RowStatus
}

pmSchedIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The locally unique, administratively assigned index for this
        scheduling entry."
    ::= { pmSchedEntry 1 }

pmSchedGroupIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The locally unique, administratively assigned index for the
        schedule group this scheduling entry belongs to.

        To assign multiple schedule entries to the same group, the
        pmSchedGroupIndex of each entry in the group will be set to
        the same value.  This pmSchedGroupIndex value must be equal to
        the pmSchedIndex of one of the entries in the group.  If the
        entry whose pmSchedIndex equals the pmSchedGroupIndex
        for the group is deleted, the agent will assign a new
        pmSchedGroupIndex to all remaining members of the group.

        If an entry is not a member of a group, its pmSchedGroupIndex
        must be assigned to the value of its pmSchedIndex.

        Policies that are controlled by a group of schedule entries
        are active when any schedule in the group is active."
    ::= { pmSchedEntry 2 }






pmSchedDescr OBJECT-TYPE
    SYNTAX      PmUTF8String
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The human-readable description of the purpose of this
        scheduling entry."
    DEFVAL { ''H }
    ::= { pmSchedEntry 3 }

pmSchedTimePeriod OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The overall range of calendar dates and times over which this
        schedule is active.  It is stored in a slightly extended version
        of the format for a 'period-explicit' defined in RFC 2445.
        This format is expressed as a string representing the
        starting date and time, in which the character 'T' indicates
        the beginning of the time portion, followed by the solidus
        character, '/', followed by a similar string representing an
        end date and time.  The start of the period MUST be before the
        end of the period.  Date-Time values are expressed as
        substrings of the form 'yyyymmddThhmmss'.  For example:

            20000101T080000/20000131T130000

              January 1, 2000, 0800 through January 31, 2000, 1PM

        The 'Date with UTC time' format defined in RFC 2445 in which
        the Date-Time string ends with the character 'Z' is not
        allowed.

        This 'period-explicit' format is also extended to allow two
        special cases in which one of the Date-Time strings is
        replaced with a special string defined in RFC 2445:

        1. If the first Date-Time value is replaced with the string
           'THISANDPRIOR', then the value indicates that the schedule
           is active at any time prior to the Date-Time that appears
           after the '/'.

        2. If the second Date-Time is replaced with the string
           'THISANDFUTURE', then the value indicates that the schedule
           is active at any time after the Date-Time that appears
           before the '/'.




        Note that although RFC 2445 defines these two strings, they are
        not specified for use in the 'period-explicit' format.  The use
        of these strings represents an extension to the
        'period-explicit' format."
    ::= { pmSchedEntry 4 }

pmSchedMonth OBJECT-TYPE
    SYNTAX      BITS {
                    january(0),
                    february(1),
                    march(2),
                    april(3),
                    may(4),
                    june(5),
                    july(6),
                    august(7),
                    september(8),
                    october(9),
                    november(10),
                    december(11)
                }

    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the specific months within that time period when the schedule
        is active.  Setting all bits will cause the schedule to act
        independently of the month."
    DEFVAL { { january, february, march, april, may, june, july,
               august, september, october, november, december } }
    ::= { pmSchedEntry 5 }

pmSchedDay OBJECT-TYPE
    SYNTAX      BITS {
                    d1(0),   d2(1),   d3(2),   d4(3),   d5(4),
                    d6(5),   d7(6),   d8(7),   d9(8),   d10(9),
                    d11(10), d12(11), d13(12), d14(13), d15(14),
                    d16(15), d17(16), d18(17), d19(18), d20(19),
                    d21(20), d22(21), d23(22), d24(23), d25(24),
                    d26(25), d27(26), d28(27), d29(28), d30(29),
                    d31(30),
                    r1(31),  r2(32),  r3(33),  r4(34),  r5(35),
                    r6(36),  r7(37),  r8(38),  r9(39),  r10(40),
                    r11(41), r12(42), r13(43), r14(44), r15(45),
                    r16(46), r17(47), r18(48), r19(49), r20(50),
                    r21(51), r22(52), r23(53), r24(54), r25(55),



                    r26(56), r27(57), r28(58), r29(59), r30(60),
                    r31(61)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the specific days of the month within that time period when
        the schedule is active.

        There are two sets of bits one can use to define the day
        within a month:

        Enumerations starting with the letter 'd' indicate a
        day in a month relative to the first day of a month.
        The first day of the month can therefore be specified
        by setting the bit d1(0), and d31(30) means the last
        day of a month with 31 days.

        Enumerations starting with the letter 'r' indicate a
        day in a month in reverse order, relative to the last
        day of a month.  The last day in the month can therefore
        be specified by setting the bit r1(31), and r31(61) means
        the first day of a month with 31 days.

        Setting multiple bits will include several days in the set
        of possible days for this schedule.  Setting all bits starting
        with the letter 'd' or all bits starting with the letter 'r'
        will cause the schedule to act independently of the day of the
        month."
    DEFVAL { {  d1, d2, d3, d4, d5, d6, d7, d8, d9, d10,
                d11, d12, d13, d14, d15, d16, d17, d18, d19, d20,
                d21, d22, d23, d24, d25, d26, d27, d28, d29, d30,
                d31, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10,
                r11, r12, r13, r14, r15, r16, r17, r18, r19, r20,
                r21, r22, r23, r24, r25, r26, r27, r28, r29, r30,
                r31 } }
    ::= { pmSchedEntry 6 }

pmSchedWeekDay OBJECT-TYPE
    SYNTAX      BITS {
                    sunday(0),
                    monday(1),
                    tuesday(2),
                    wednesday(3),
                    thursday(4),
                    friday(5),



                    saturday(6)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the specific days of the week within that time period when
        the schedule is active.  Setting all bits will cause the
        schedule to act independently of the day of the week."
    DEFVAL { { sunday, monday, tuesday, wednesday, thursday,
               friday, saturday } }
    ::= { pmSchedEntry 7 }

pmSchedTimeOfDay OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..15))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION

        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the range of times in a day when the schedule is active.

        This value is stored in a format based on the RFC 2445 format
        for 'time': The character 'T' followed by a 'time' string,
        followed by the solidus character, '/', followed by the
        character 'T', followed by a second time string.  The first time
        indicates the beginning of the range, and the second time
        indicates the end.  Thus, this value takes the following
        form:

            'Thhmmss/Thhmmss'.

        The second substring always identifies a later time than the
        first substring.  To allow for ranges that span midnight,
        however, the value of the second string may be smaller than
        the value of the first substring.  Thus, 'T080000/T210000'
        identifies the range from 0800 until 2100, whereas
        'T210000/T080000' identifies the range from 2100 until 0800 of
        the following day.

        When a range spans midnight, by definition it includes parts
        of two successive days.  When one of these days is also
        selected by either the MonthOfYearMask, DayOfMonthMask, and/or
        DayOfWeekMask, but the other day is not, then the policy is
        active only during the portion of the range that falls on the
        selected day.  For example, if the range extends from 2100



        until 0800, and the day of week mask selects Monday and
        Tuesday, then the policy is active during the following three
        intervals:

            From midnight Sunday until 0800 Monday
            From 2100 Monday until 0800 Tuesday
            From 2100 Tuesday until 23:59:59 Tuesday

         Setting this value to 'T000000/T235959' will cause the
         schedule to act independently of the time of day."
    DEFVAL { '543030303030302F54323335393539'H } -- T000000/T235959
    ::= { pmSchedEntry 8 }

pmSchedLocalOrUtc OBJECT-TYPE
    SYNTAX      INTEGER {
                    localTime(1),
                    utcTime(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the times represented in the
        TimePeriod object and in the various Mask objects represent
        local times or UTC times."
    DEFVAL { utcTime }
    ::= { pmSchedEntry 9 }

pmSchedStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this schedule entry is kept
         in volatile storage and lost upon reboot or
         backed up by non-volatile or permanent storage.

         Conceptual rows having the value 'permanent' must allow write
         access to the columnar objects pmSchedDescr, pmSchedWeekDay,
         pmSchedMonth, and pmSchedDay.

         If the value of this object is 'permanent', no values in the
         associated row have to be writable."
    DEFVAL { volatile }
    ::= { pmSchedEntry 10 }







pmSchedRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this schedule entry.

         If the value of this object is active, no object in this row
         may be modified."
    ::= { pmSchedEntry 11 }

-- Policy Tracking

-- The "policy to element" (PE) table and the "element to policy" (EP)
-- table track the status of execution contexts grouped by policy and
-- element respectively.

pmTrackingPETable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmTrackingPEEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmTrackingPETable describes what elements
         are active (under control of) a policy.  This table is indexed
         in order to optimize retrieval of the entire status for a
         given policy."
    ::= { pmMib 9 }

pmTrackingPEEntry OBJECT-TYPE
    SYNTAX      PmTrackingPEEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in the pmTrackingPETable.  The pmPolicyIndex in
         the index specifies the policy tracked by this entry.

         Note that some combinations of index values may result in an
         instance name that exceeds a length of 128 sub-identifiers,
         which exceeds the maximum for the SNMP
         protocol.  Implementations should take care to avoid such
         combinations."
    INDEX       { pmPolicyIndex, pmTrackingPEElement,
                  pmTrackingPEContextName, pmTrackingPEContextEngineID }
    ::= { pmTrackingPETable 1 }







PmTrackingPEEntry ::= SEQUENCE {
    pmTrackingPEElement          RowPointer,
    pmTrackingPEContextName      SnmpAdminString,
    pmTrackingPEContextEngineID  OCTET STRING,
    pmTrackingPEInfo             BITS
}

pmTrackingPEElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element that is acted upon by the associated policy.

         As this object is used in the index for the
         pmTrackingPETable, users of this table should be careful not
         to create entries that would result in instance names with
         more than 128 sub-identifiers."
    ::= { pmTrackingPEEntry 1 }

pmTrackingPEContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context.  If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmTrackingPEEntry 2 }

pmTrackingPEContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system.  This object contains
        the contextEngineID of the system on which the associated
        element resides.  If the element is on the local system,
        this object will be the empty string."
    ::= { pmTrackingPEEntry 3 }

pmTrackingPEInfo OBJECT-TYPE
    SYNTAX      BITS {
                    actionSkippedDueToPrecedence(0),
                    conditionRunTimeException(1),
                    conditionUserSignal(2),



                    actionRunTimeException(3),
                    actionUserSignal(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "This object returns information about the previous policy
         script executions.

         If the actionSkippedDueToPrecedence(1) bit is set, the last
         execution of the associated policy condition returned non-zero,
         but the action is not active, because it was trumped by a
         matching policy condition in the same precedence group with a
         higher precedence value.

         If the conditionRunTimeException(2) bit is set, the last
         execution of the associated policy condition encountered a
         run-time exception and aborted.

         If the conditionUserSignal(3) bit is set, the last
         execution of the associated policy condition called the
         signalError() function.

         If the actionRunTimeException(4) bit is set, the last
         execution of the associated policy action encountered a
         run-time exception and aborted.

         If the actionUserSignal(5) bit is set, the last
         execution of the associated policy action called the
         signalError() function.

         Entries will only exist in this table of one or more bits are
         set.  In particular, if an entry does not exist for a
         particular policy/element combination, it can be assumed that
         the policy's condition did not match 'this element'."
    ::= { pmTrackingPEEntry 4 }

-- Element to Policy Table

pmTrackingEPTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmTrackingEPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmTrackingEPTable describes what policies
         are controlling an element.  This table is indexed in
         order to optimize retrieval of the status of all policies
         active for a given element."



    ::= { pmMib 10 }

pmTrackingEPEntry OBJECT-TYPE
    SYNTAX      PmTrackingEPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in the pmTrackingEPTable.  Entries exist for all
         element/policy combinations for which the policy's condition
         matches and only if the schedule for the policy is active.

         The pmPolicyIndex in the index specifies the policy
         tracked by this entry.

         Note that some combinations of index values may result in an
         instance name that exceeds a length of 128 sub-identifiers,
         which exceeds the maximum for the SNMP protocol.
         Implementations should take care to avoid such combinations."
    INDEX       { pmTrackingEPElement, pmTrackingEPContextName,
                  pmTrackingEPContextEngineID, pmPolicyIndex }
    ::= { pmTrackingEPTable 1 }

PmTrackingEPEntry ::= SEQUENCE {
    pmTrackingEPElement          RowPointer,
    pmTrackingEPContextName      SnmpAdminString,
    pmTrackingEPContextEngineID  OCTET STRING,
    pmTrackingEPStatus           INTEGER
}

pmTrackingEPElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element acted upon by the associated policy.

         As this object is used in the index for the
         pmTrackingEPTable, users of this table should be careful
         not to create entries that would result in instance names
         with more than 128 sub-identifiers."
    ::= { pmTrackingEPEntry 1 }

pmTrackingEPContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context



        for the target system, this object is used to identify the
        context.  If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmTrackingEPEntry 2 }

pmTrackingEPContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system.  This object contains
        the contextEngineID of the system on which the associated
        element resides.  If the element is on the local system,
        this object will be the empty string."
    ::= { pmTrackingEPEntry 3 }

pmTrackingEPStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    on(1),
                    forceOff(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This entry will only exist if the calendar for the policy is
         active and if the associated policyCondition returned 1 for
         'this element'.

         A policy can be forcibly disabled on a particular element
         by setting this value to forceOff(2).  The agent should then
         act as though the policyCondition failed for 'this element'.
         The forceOff(2) state will persist (even across reboots) until
         this value is set to on(1) by a management request.  The
         forceOff(2) state may be set even if the entry does not
         previously exist so that future policy invocations can be
         avoided.

         Unless forcibly disabled, if this entry exists, its value
         will be on(1)."
    ::= { pmTrackingEPEntry 4 }

-- Policy Debugging Table

pmDebuggingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmDebuggingEntry
    MAX-ACCESS  not-accessible
    STATUS      current



    DESCRIPTION
         "Policies that have debugging turned on will generate a log
         entry in the policy debugging table for every runtime
         exception that occurs in either the condition or action
         code.

         The pmDebuggingTable logs debugging messages when
         policies experience run-time exceptions in either the condition
         or action code and the associated pmPolicyDebugging object
         has been turned on.

         The maximum number of debugging entries that will be stored
         and the maximum length of time an entry will be kept are an
         implementation-dependent manner.  If entries must
         be discarded to make room for new entries, the oldest entries
         must be discarded first.

         If the system restarts, all debugging entries may be deleted."
    ::= { pmMib 11 }

pmDebuggingEntry OBJECT-TYPE
    SYNTAX      PmDebuggingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in the pmDebuggingTable.  The pmPolicyIndex in the
         index specifies the policy that encountered the exception
         that led to this log entry.

         Note that some combinations of index values may result in an
         instance name that exceeds a length of 128 sub-identifiers,
         which exceeds the maximum for the SNMP protocol.
         Implementations should take care to avoid such combinations."
    INDEX       { pmPolicyIndex, pmDebuggingElement,
                  pmDebuggingContextName, pmDebuggingContextEngineID,
                  pmDebuggingLogIndex }
    ::= { pmDebuggingTable 1 }

PmDebuggingEntry ::= SEQUENCE {
    pmDebuggingElement          RowPointer,
    pmDebuggingContextName      SnmpAdminString,
    pmDebuggingContextEngineID  OCTET STRING,
    pmDebuggingLogIndex         Unsigned32,
    pmDebuggingMessage          PmUTF8String
}






pmDebuggingElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element the policy was executing on when it encountered
         the error that led to this log entry.

         For example, if the element is interface 3, then this object
         will contain the OID for 'ifIndex.3'.

         As this object is used in the index for the
         pmDebuggingTable, users of this table should be careful
         not to create entries that would result in instance names
         with more than 128 sub-identifiers."
    ::= { pmDebuggingEntry 1 }

pmDebuggingContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context.  If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmDebuggingEntry 2 }

pmDebuggingContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system.  This object contains
        the contextEngineID of the system on which the associated
        element resides.  If the element is on the local system,
        this object will be the empty string."
    ::= { pmDebuggingEntry 3 }

pmDebuggingLogIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A unique index for this log entry among other log entries
         for this policy/element combination."
    ::= { pmDebuggingEntry 4 }



pmDebuggingMessage OBJECT-TYPE
    SYNTAX      PmUTF8String (SIZE (0..128))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "An error message generated by the policy execution
         environment.  It is recommended that this message include the
         time of day when the message was generated, if known."
    ::= { pmDebuggingEntry 5 }

-- Notifications

pmNotifications OBJECT IDENTIFIER ::= { pmMib 0 }

pmNewRoleNotification NOTIFICATION-TYPE
    OBJECTS     { pmRoleStatus }
    STATUS      current
    DESCRIPTION
        "The pmNewRoleNotification is sent when an agent is configured
        with its first instance of a previously unused role string
        (not every time a new element is given a particular role).

        An instance of the pmRoleStatus object is sent containing
        the new roleString in its index.  In the event that two or
        more elements are given the same role simultaneously, it is an
        implementation-dependent matter as to which pmRoleTable
        instance will be included in the notification."
    ::= { pmNotifications 1 }

pmNewCapabilityNotification NOTIFICATION-TYPE
    OBJECTS     { pmCapabilitiesType }
    STATUS      current
    DESCRIPTION
        "The pmNewCapabilityNotification is sent when an agent
        gains a new capability that did not previously exist in any
        element on the system (not every time an element gains a
        particular capability).

        An instance of the pmCapabilitiesType object is sent containing
        the identity of the new capability.  In the event that two or
        more elements gain the same capability simultaneously, it is an
        implementation-dependent matter as to which pmCapabilitiesType
        instance will be included in the notification."
    ::= { pmNotifications 2 }

pmAbnormalTermNotification NOTIFICATION-TYPE
    OBJECTS     { pmTrackingPEInfo }
    STATUS      current



    DESCRIPTION
        "The pmAbnormalTermNotification is sent when a policy's
        pmPolicyAbnormalTerminations gauge value changes from zero to
        any value greater than zero and no such notification has been
        sent for that policy in the last 5 minutes.

        The notification contains an instance of the pmTrackingPEInfo
        object where the pmPolicyIndex component of the index
        identifies the associated policy and the rest of the index
        identifies an element on which the policy failed."
    ::= { pmNotifications 3 }

-- Compliance Statements

    pmConformance   OBJECT IDENTIFIER ::= { pmMib 12 }
    pmCompliances   OBJECT IDENTIFIER ::= { pmConformance 1 }
    pmGroups        OBJECT IDENTIFIER ::= { pmConformance 2 }

pmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "Describes the requirements for conformance to
        the Policy-Based Management MIB"
    MODULE  -- this module
        MANDATORY-GROUPS { pmPolicyManagementGroup, pmSchedGroup,
                           pmNotificationGroup }
    ::= { pmCompliances 1 }

pmPolicyManagementGroup OBJECT-GROUP
    OBJECTS { pmPolicyPrecedenceGroup, pmPolicyPrecedence,
              pmPolicySchedule, pmPolicyElementTypeFilter,
              pmPolicyConditionScriptIndex, pmPolicyActionScriptIndex,
              pmPolicyParameters,
              pmPolicyConditionMaxLatency, pmPolicyActionMaxLatency,
              pmPolicyMaxIterations,
              pmPolicyDescription, pmPolicyMatches,
              pmPolicyAbnormalTerminations,
              pmPolicyExecutionErrors, pmPolicyDebugging,
              pmPolicyStorageType, pmPolicyAdminStatus,
              pmPolicyRowStatus, pmPolicyCodeText, pmPolicyCodeStatus,
              pmElementTypeRegMaxLatency, pmElementTypeRegDescription,
              pmElementTypeRegStorageType, pmElementTypeRegRowStatus,
              pmRoleStatus,
              pmCapabilitiesType, pmCapabilitiesOverrideState,
              pmCapabilitiesOverrideRowStatus,
              pmTrackingPEInfo,
              pmTrackingEPStatus,
              pmDebuggingMessage }



    STATUS  current
    DESCRIPTION
        "Objects that allow for the creation and management of
        configuration policies."
    ::=  { pmGroups 1 }

pmSchedGroup OBJECT-GROUP
    OBJECTS { pmSchedLocalTime, pmSchedGroupIndex,
              pmSchedDescr, pmSchedTimePeriod,
              pmSchedMonth, pmSchedDay, pmSchedWeekDay,
              pmSchedTimeOfDay, pmSchedLocalOrUtc, pmSchedStorageType,
              pmSchedRowStatus
            }
    STATUS current
    DESCRIPTION
        "Objects that allow for the scheduling of policies."
    ::= { pmGroups 2 }

pmNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS { pmNewRoleNotification,
                    pmNewCapabilityNotification,
                    pmAbnormalTermNotification }
    STATUS        current
    DESCRIPTION
        "Notifications sent by an Policy MIB agent."
    ::= { pmGroups 3 }

pmBaseFunctionLibrary OBJECT IDENTIFIER ::= { pmGroups 4 }

END

ZeroDay Forums Mini