Sh3ll
OdayForums


Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory :  /usr/share/mibs/ietf/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Current File : //usr/share/mibs/ietf/RADIUS-ACC-CLIENT-MIB
RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN

IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
       Counter32, Integer32, Gauge32,
       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
       InetAddressType, InetAddress,
       InetPortNumber                   FROM INET-ADDRESS-MIB
       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;


radiusAccClientMIB MODULE-IDENTITY
      LAST-UPDATED "200608210000Z" -- 21 August 2006
      ORGANIZATION "IETF RADIUS Extensions Working Group."
      CONTACT-INFO
             " Bernard Aboba
               Microsoft
               One Microsoft Way



               Redmond, WA  98052
               US
               Phone: +1 425 936 6605
               EMail: bernarda@microsoft.com"
      DESCRIPTION
            "The MIB module for entities implementing the client
             side of the Remote Authentication Dial-In User Service
             (RADIUS) accounting protocol.  Copyright (C) The
             Internet Society (2006).  This version of this MIB
             module is part of RFC 4670; see the RFC itself for
             full legal notices."
      REVISION "200608210000Z"  -- 21 August 2006
      DESCRIPTION
            "Revised version as published in RFC 4670.
             This version obsoletes that of RFC 2620 by
             deprecating the MIB table containing IPv4-only
             address formats and defining a new table to add support
             for version-neutral IP address formats.  The remaining
             MIB objects from RFC 2620 are carried forward into this
             version."
      REVISION "199906110000Z"  -- 11 Jun 1999
      DESCRIPTION "Initial version as published in RFC 2620."
      ::= { radiusAccounting 2 }

radiusMIB OBJECT-IDENTITY
      STATUS  current
      DESCRIPTION
             "The OID assigned to RADIUS MIB work by the IANA."
      ::= { mib-2 67 }

radiusAccounting  OBJECT IDENTIFIER ::= {radiusMIB 2}

radiusAccClientMIBObjects     OBJECT IDENTIFIER
      ::= { radiusAccClientMIB 1 }

radiusAccClient  OBJECT IDENTIFIER
      ::= { radiusAccClientMIBObjects 1 }

radiusAccClientInvalidServerAddresses OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Response packets
             received from unknown addresses."
      ::= { radiusAccClient 1 }




radiusAccClientIdentifier OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The NAS-Identifier of the RADIUS accounting client.
             This is not necessarily the same as sysName in MIB
             II."
      REFERENCE "RFC 2865 section 5.32"
      ::= { radiusAccClient 2 }

radiusAccServerTable OBJECT-TYPE
      SYNTAX SEQUENCE OF RadiusAccServerEntry
      MAX-ACCESS not-accessible
      STATUS     deprecated
      DESCRIPTION
            "The (conceptual) table listing the RADIUS accounting
             servers with which the client shares a secret."
      ::= { radiusAccClient 3 }

radiusAccServerEntry OBJECT-TYPE
      SYNTAX     RadiusAccServerEntry
      MAX-ACCESS not-accessible
      STATUS     deprecated
      DESCRIPTION
            "An entry (conceptual row) representing a RADIUS
             accounting server with which the client shares a
             secret."
      INDEX      { radiusAccServerIndex }
      ::= { radiusAccServerTable 1 }

RadiusAccServerEntry ::= SEQUENCE {
      radiusAccServerIndex                           Integer32,
      radiusAccServerAddress                         IpAddress,
      radiusAccClientServerPortNumber                Integer32,
      radiusAccClientRoundTripTime                   TimeTicks,
      radiusAccClientRequests                        Counter32,
      radiusAccClientRetransmissions                 Counter32,
      radiusAccClientResponses                       Counter32,
      radiusAccClientMalformedResponses              Counter32,
      radiusAccClientBadAuthenticators               Counter32,
      radiusAccClientPendingRequests                   Gauge32,
      radiusAccClientTimeouts                        Counter32,
      radiusAccClientUnknownTypes                    Counter32,
      radiusAccClientPacketsDropped                  Counter32
}





radiusAccServerIndex OBJECT-TYPE
      SYNTAX     Integer32 (1..2147483647)
      MAX-ACCESS not-accessible
      STATUS     deprecated
      DESCRIPTION
            "A number uniquely identifying each RADIUS
             Accounting server with which this client
             communicates."
      ::= { radiusAccServerEntry 1 }

radiusAccServerAddress OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS read-only
      STATUS     deprecated
      DESCRIPTION
            "The IP address of the RADIUS accounting server
             referred to in this table entry."
      ::= { radiusAccServerEntry 2 }

radiusAccClientServerPortNumber  OBJECT-TYPE
      SYNTAX Integer32 (0..65535)
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The UDP port the client is using to send requests to
             this server."
      REFERENCE "RFC 2866 section 3"
      ::= { radiusAccServerEntry 3 }

radiusAccClientRoundTripTime  OBJECT-TYPE
      SYNTAX TimeTicks
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
             "The time interval between the most recent
             Accounting-Response and the Accounting-Request that
             matched it from this RADIUS accounting server."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerEntry 4 }

-- Request/Response statistics
--
-- Requests = Responses + PendingRequests + ClientTimeouts
--
-- Responses - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received





radiusAccClientRequests OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             sent.  This does not include retransmissions."
      REFERENCE "RFC 2866 section 4.1"
      ::= { radiusAccServerEntry 5 }

radiusAccClientRetransmissions OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             retransmitted to this RADIUS accounting server.
             Retransmissions include retries where the
             Identifier and Acct-Delay have been updated, as
             well as those in which they remain the same."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerEntry 6 }

radiusAccClientResponses OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS packets received on the
             accounting port from this server."
      REFERENCE "RFC 2866 section 4.2"
      ::= { radiusAccServerEntry 7 }

radiusAccClientMalformedResponses OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
             "The number of malformed RADIUS Accounting-Response
              packets received from this server.  Malformed packets
             include packets with an invalid length.  Bad
             authenticators and unknown types are not included as
             malformed accounting responses."
      REFERENCE "RFC 2866 section 3"



      ::= { radiusAccServerEntry 8 }

radiusAccClientBadAuthenticators OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS Accounting-Response
             packets that contained invalid authenticators
             received from this server."
      REFERENCE "RFC 2866 section 3"
      ::= { radiusAccServerEntry 9 }

radiusAccClientPendingRequests OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             sent to this server that have not yet timed out or
             received a response.  This variable is incremented
             when an Accounting-Request is sent and decremented
             due to receipt of an Accounting-Response, a timeout,
             or a retransmission."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerEntry 10 }

radiusAccClientTimeouts OBJECT-TYPE
     SYNTAX Counter32
     UNITS "timeouts"
     MAX-ACCESS read-only
     STATUS deprecated
     DESCRIPTION
          "The number of accounting timeouts to this server.
           After a timeout, the client may retry to the same
           server, send to a different server, or give up.
           A retry to the same server is counted as a
           retransmit as well as a timeout.  A send to a different
           server is counted as an Accounting-Request as well as
           a timeout."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerEntry  11 }

radiusAccClientUnknownTypes OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"



      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS packets of unknown type that
             were received from this server on the accounting port."
      REFERENCE "RFC 2866 section 4"
      ::= { radiusAccServerEntry  12 }

radiusAccClientPacketsDropped OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS deprecated
      DESCRIPTION
            "The number of RADIUS packets that were received from
             this server on the accounting port and dropped for some
             other reason."
      ::= { radiusAccServerEntry  13 }


-- New MIB objects added in this revision

radiusAccServerExtTable OBJECT-TYPE
      SYNTAX SEQUENCE OF RadiusAccServerExtEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "The (conceptual) table listing the RADIUS accounting
             servers with which the client shares a secret."
      ::= { radiusAccClient 4 }

radiusAccServerExtEntry OBJECT-TYPE
      SYNTAX     RadiusAccServerExtEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "An entry (conceptual row) representing a RADIUS
             accounting server with which the client shares a
             secret."
      INDEX      { radiusAccServerExtIndex }
      ::= { radiusAccServerExtTable 1 }

RadiusAccServerExtEntry ::= SEQUENCE {
      radiusAccServerExtIndex                    Integer32,
      radiusAccServerInetAddressType             InetAddressType,
      radiusAccServerInetAddress                 InetAddress,
      radiusAccClientServerInetPortNumber        InetPortNumber,
      radiusAccClientExtRoundTripTime            TimeTicks,



      radiusAccClientExtRequests                 Counter32,
      radiusAccClientExtRetransmissions          Counter32,
      radiusAccClientExtResponses                Counter32,
      radiusAccClientExtMalformedResponses       Counter32,
      radiusAccClientExtBadAuthenticators        Counter32,
      radiusAccClientExtPendingRequests          Gauge32,
      radiusAccClientExtTimeouts                 Counter32,
      radiusAccClientExtUnknownTypes             Counter32,
      radiusAccClientExtPacketsDropped           Counter32,
      radiusAccClientCounterDiscontinuity        TimeTicks
}

radiusAccServerExtIndex OBJECT-TYPE
      SYNTAX     Integer32 (1..2147483647)
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "A number uniquely identifying each RADIUS
             Accounting server with which this client
             communicates."
      ::= { radiusAccServerExtEntry 1 }


radiusAccServerInetAddressType OBJECT-TYPE
         SYNTAX     InetAddressType
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
               "The type of address format used for the
                radiusAccServerInetAddress object."
         ::= { radiusAccServerExtEntry 2 }


   radiusAccServerInetAddress OBJECT-TYPE
         SYNTAX     InetAddress
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
               "The IP address of the RADIUS accounting
                server referred to in this table entry, using
                the version-neutral IP address format."
         ::= { radiusAccServerExtEntry 3 }

   radiusAccClientServerInetPortNumber  OBJECT-TYPE
         SYNTAX InetPortNumber ( 1..65535 )
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION



               "The UDP port the client is using to send requests
                to this accounting server.  The value zero (0) is
                invalid."
         REFERENCE "RFC 2866 section 3"
         ::= { radiusAccServerExtEntry 4 }


radiusAccClientExtRoundTripTime  OBJECT-TYPE
      SYNTAX TimeTicks
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
             "The time interval between the most recent
             Accounting-Response and the Accounting-Request that
             matched it from this RADIUS accounting server."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerExtEntry 5 }

-- Request/Response statistics
--
-- Requests = Responses + PendingRequests + ClientTimeouts
--
-- Responses - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received

radiusAccClientExtRequests OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             sent.  This does not include retransmissions.
             This counter may experience a discontinuity when the
             RADIUS Accounting Client module within the managed
             entity is reinitialized, as indicated by the current
             value of radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 4.1"
      ::= { radiusAccServerExtEntry 6 }

radiusAccClientExtRetransmissions OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             retransmitted to this RADIUS accounting server.



             Retransmissions include retries where the
             Identifier and Acct-Delay have been updated, as
             well as those in which they remain the same.
             This counter may experience a discontinuity when the
             RADIUS Accounting Client module within the managed
             entity is reinitialized, as indicated by the current
             value of radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerExtEntry 7 }

radiusAccClientExtResponses OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets received on the
             accounting port from this server.  This counter
             may experience a discontinuity when the RADIUS
             Accounting Client module within the managed entity is
             reinitialized, as indicated by the current value of
             radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 4.2"
      ::= { radiusAccServerExtEntry 8 }

radiusAccClientExtMalformedResponses OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of malformed RADIUS Accounting-Response
             packets received from this server.  Malformed packets
             include packets with an invalid length.  Bad
             authenticators and unknown types are not included as
             malformed accounting responses.  This counter may
             experience a discontinuity when the RADIUS Accounting
             Client module within the managed entity is
             reinitialized, as indicated by the current
             value of radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 3"
      ::= { radiusAccServerExtEntry 9 }

radiusAccClientExtBadAuthenticators OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current



      DESCRIPTION
            "The number of RADIUS Accounting-Response
             packets that contained invalid authenticators
             received from this server.  This counter may
             experience a discontinuity when the RADIUS
             Accounting Client module within the managed
             entity is reinitialized, as indicated by the
             current value of
             radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 3"
      ::= { radiusAccServerExtEntry 10 }

radiusAccClientExtPendingRequests OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             sent to this server that have not yet timed out or
             received a response.  This variable is incremented
             when an Accounting-Request is sent and decremented
             due to receipt of an Accounting-Response, a timeout,
             or a retransmission.  This counter may experience a
             discontinuity when the RADIUS Accounting Client module
             within the managed entity is reinitialized, as
             indicated by the current value of
             radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 2"
      ::= { radiusAccServerExtEntry 11 }

radiusAccClientExtTimeouts OBJECT-TYPE
     SYNTAX Counter32
     UNITS "timeouts"
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
          "The number of accounting timeouts to this server.
           After a timeout, the client may retry to the same
           server, send to a different server, or give up.
           A retry to the same server is counted as a
           retransmit as well as a timeout.  A send to a different
           server is counted as an Accounting-Request as well as
           a timeout.  This counter may experience a discontinuity
           when the RADIUS Accounting Client module within the
           managed entity is reinitialized, as indicated by the
           current value of radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 2"



      ::= { radiusAccServerExtEntry  12 }

radiusAccClientExtUnknownTypes OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets of unknown type that
             were received from this server on the accounting port.
             This counter may experience a discontinuity when the
             RADIUS Accounting Client module within the managed
             entity is reinitialized, as indicated by the current
             value of radiusAccClientCounterDiscontinuity."
      REFERENCE "RFC 2866 section 4"
      ::= { radiusAccServerExtEntry  13 }

radiusAccClientExtPacketsDropped OBJECT-TYPE
      SYNTAX Counter32
      UNITS "packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets that were received from
             this server on the accounting port and dropped for some
             other reason.  This counter may experience a
             discontinuity when the RADIUS Accounting Client module
             within the managed entity is reinitialized, as indicated
             by the current value of
             radiusAccClientCounterDiscontinuity."
      ::= { radiusAccServerExtEntry  14 }

radiusAccClientCounterDiscontinuity OBJECT-TYPE
         SYNTAX TimeTicks
         UNITS "centiseconds"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of centiseconds since the last
                discontinuity in the RADIUS Accounting Client
                counters.  A discontinuity may be the result of a
                reinitialization of the RADIUS Accounting Client
                module within the managed entity."
         ::= { radiusAccServerExtEntry 15 }







-- conformance information

radiusAccClientMIBConformance  OBJECT IDENTIFIER
      ::= { radiusAccClientMIB 2 }

radiusAccClientMIBCompliances  OBJECT IDENTIFIER
      ::= { radiusAccClientMIBConformance 1 }

radiusAccClientMIBGroups  OBJECT IDENTIFIER
      ::= { radiusAccClientMIBConformance 2 }


-- units of conformance

radiusAccClientMIBCompliance MODULE-COMPLIANCE
     STATUS  deprecated
     DESCRIPTION
           "The compliance statement for accounting clients
            implementing the RADIUS Accounting Client MIB.
            Implementation of this module is for IPv4-only
            entities, or for backwards compatibility use with
            entities that support both IPv4 and IPv6."
     MODULE  -- this module
         MANDATORY-GROUPS { radiusAccClientMIBGroup }

     ::= { radiusAccClientMIBCompliances 1 }


radiusAccClientExtMIBCompliance MODULE-COMPLIANCE
     STATUS  current
     DESCRIPTION
           "The compliance statement for accounting
            clients implementing the RADIUS Accounting
            Client IPv6 Extensions MIB.  Implementation of
            this module is for entities that support IPv6,
            or support IPv4 and IPv6."
     MODULE  -- this module
         MANDATORY-GROUPS { radiusAccClientExtMIBGroup }

     OBJECT radiusAccServerInetAddressType
     SYNTAX InetAddressType { ipv4(1), ipv6(2) }
     DESCRIPTION
           "An implementation is only required to support
            IPv4 and globally unique IPv6 addresses."

     OBJECT radiusAccServerInetAddress
     SYNTAX InetAddress ( SIZE (4|16) )
     DESCRIPTION



           "An implementation is only required to support
            IPv4 and globally unique IPv6 addresses."

     ::= { radiusAccClientMIBCompliances 2 }


-- units of conformance

radiusAccClientMIBGroup OBJECT-GROUP
     OBJECTS { radiusAccClientIdentifier,
               radiusAccClientInvalidServerAddresses,
               radiusAccServerAddress,
               radiusAccClientServerPortNumber,
               radiusAccClientRoundTripTime,
               radiusAccClientRequests,
               radiusAccClientRetransmissions,
               radiusAccClientResponses,
               radiusAccClientMalformedResponses,
               radiusAccClientBadAuthenticators,
               radiusAccClientPendingRequests,
               radiusAccClientTimeouts,
               radiusAccClientUnknownTypes,
               radiusAccClientPacketsDropped
         }
     STATUS  deprecated
     DESCRIPTION
           "The basic collection of objects providing management of
            RADIUS Accounting Clients."
     ::= { radiusAccClientMIBGroups 1 }


radiusAccClientExtMIBGroup OBJECT-GROUP
     OBJECTS { radiusAccClientIdentifier,
               radiusAccClientInvalidServerAddresses,
               radiusAccServerInetAddressType,
               radiusAccServerInetAddress,
               radiusAccClientServerInetPortNumber,
               radiusAccClientExtRoundTripTime,
               radiusAccClientExtRequests,
               radiusAccClientExtRetransmissions,
               radiusAccClientExtResponses,
               radiusAccClientExtMalformedResponses,
               radiusAccClientExtBadAuthenticators,
               radiusAccClientExtPendingRequests,
               radiusAccClientExtTimeouts,
               radiusAccClientExtUnknownTypes,
               radiusAccClientExtPacketsDropped,
               radiusAccClientCounterDiscontinuity



         }
     STATUS  current
     DESCRIPTION
           "The basic collection of objects providing management of
            RADIUS Accounting Clients."
     ::= { radiusAccClientMIBGroups 2 }


END

ZeroDay Forums Mini