Sh3ll
OdayForums


Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory :  /usr/share/mibs/ietf/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Current File : //usr/share/mibs/ietf/T11-FC-FABRIC-LOCK-MIB
T11-FC-FABRIC-LOCK-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    mib-2                              FROM SNMPv2-SMI   -- [RFC2578]
    RowStatus                          FROM SNMPv2-TC    -- [RFC2579]
    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF  -- [RFC2580]
    InetAddressType, InetAddress       FROM
                                       INET-ADDRESS-MIB  -- [RFC4001]
    fcmInstanceIndex, fcmSwitchIndex   FROM FC-MGMT-MIB  -- [RFC4044]
    T11NsGs4RejectReasonCode           FROM
                                 T11-FC-NAME-SERVER-MIB  -- [RFC4438]
    T11FabricIndex                     FROM T11-TC-MIB;  -- [RFC4439]

t11FabricLockMIB  MODULE-IDENTITY
    LAST-UPDATED  "200706270000Z"
    ORGANIZATION  "For the initial versions, T11.
                   For later versions, the IETF's IMSS Working Group."
    CONTACT-INFO
           "      Claudio DeSanti
                  Cisco Systems, Inc.
                  170 West Tasman Drive
                  San Jose, CA 95134 USA
                  EMail: cds@cisco.com

                  Keith McCloghrie



                  Cisco Systems, Inc.
                  170 West Tasman Drive
                  San Jose, CA 95134 USA
                  EMail: kzm@cisco.com"

    DESCRIPTION
           "The MIB module for the management of locks on a Fibre
           Channel Fabric.  A Fibre Channel Fabric lock is used to
           ensure serialized access to some types of management data
           related to a Fabric, e.g., the Fabric's Zoning Database.

           Some (managing) applications generate Fabric locks by
           initiating server sessions.  Server sessions are
           defined generically in FC-GS-5 to represent a collection of
           one or more requests to the session's server, e.g., to the
           Zone Server.  Such a session is started by a Server Session
           Begin (SSB) request, and terminated by a Server Session End
           (SSE) request.  The switch receiving the SSB is called the
           'managing' switch.  Some applications require the
           'managing' switch to lock the Fabric for the particular
           application, e.g., for Enhanced Zoning, before it can
           respond successfully to the SSB.  On receipt of the
           subsequent SSE, the lock is released.  For this usage, the
           managing switch sends an Acquire Change Authorization (ACA)
           request to other switches to lock the Fabric.

           For some other applications, a managing switch locks the
           Fabric using an Enhanced Acquire Change Authorization (EACA)
           request, which identifies the application on whose behalf
           the Fabric is being locked with an Application_ID.

           Fabric locks can also be requested more directly, e.g.,
           through the use of this MIB.  In these situations, the term
           'managing' switch is used to indicate the switch that
           receives such a request and executes it by issuing either
           ACA or EACA requests to other switches in the Fabric.

           This MIB module defines information about the 'managing'
           switch for currently-active Fabric locks.

           Copyright (C) The IETF Trust (2007).  This version
           of this MIB module is part of RFC 4936;  see the RFC
           itself for full legal notices."
    REVISION  "200706270000Z"
    DESCRIPTION
           "Initial version of this MIB module, published as RFC 4936."
    ::= { mib-2 159 }




t11FLockMIBObjects       OBJECT IDENTIFIER ::= { t11FabricLockMIB 1 }
t11FLockMIBConformance   OBJECT IDENTIFIER ::= { t11FabricLockMIB 2 }
t11FLockMIBNotifications OBJECT IDENTIFIER ::= { t11FabricLockMIB 0 }
t11FLockConfiguration    OBJECT IDENTIFIER ::= { t11FLockMIBObjects 1 }

--
-- The table of Managing Switches and their Fabric Locks
--

t11FLockTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF T11FLockEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "A table containing information about the 'managing'
           switch of each current Fabric lock, e.g., for the
           types of Servers defined in FC-GS-5.

           Each entry in this table represents either:

           1) a current Fabric lock,
           2) an in-progress attempt, requested via SNMP, to set up
              a lock, or
           3) a failed attempt, requested via SNMP, to set up a lock.

           If an entry is created via t11FLockRowStatus, but the
           attempt to obtain the lock fails, then the entry continues
           to exist until it is deleted via t11FLockRowStatus, or
           it is overwritten by the lock being established via
           a means other than SNMP.  However, rows created via
           t11FLockRowStatus are not retained over restarts."
    REFERENCE
           "Fibre Channel - Generic Services-5 (FC-GS-5),
           ANSI INCITS 427-2007, sections 4.9.5 and 6.4.10.2."
    ::= { t11FLockConfiguration 1 }

t11FLockEntry OBJECT-TYPE
    SYNTAX       T11FLockEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "Each entry contains information specific to a current
           Fabric lock set up by a particular 'managing' switch on a
           particular Fabric.  The 'managing switch' is identified by
           values of fcmInstanceIndex and fcmSwitchIndex.

           Server sessions for several different types of servers
           are defined in FC-GS-5.  The behavior of a server with



           respect to commands received within a server session is
           specified for each type of server.  For some types,
           parameter changes can only be made within the context of a
           session, and the setting up of a session requires that the
           Fabric be locked.  A Fabric is locked by one switch, called
           the 'managing' switch, sending Acquire Change Authorization
           (ACA) requests to all other switches in the Fabric.

           For other applications, a Fabric lock is established by the
           'managing' switch sending Enhanced Acquire Change
           Authorization (EACA) requests to other switches in the
           Fabric.  Each EACA request includes an Application_ID
           value to identify the application requesting the lock.

           For the benefit of this MIB module, a distinct value of
           Application_ID has also been assigned/reserved (see
           ANSI INCITS T11/06-679v0, titled 'FC-SW-5 Letter to
           T11.5') as a means of distinguishing locks established via
           Acquire Change Authorization (ACA) requests.  This
           additional assignment allows an Application_ID to be used to
           uniquely identify any active lock amongst all those
           established by either an EACA or an ACA.

           Whenever a Fabric is locked, by the sending of either an ACA
           or an EACA, a row gets created in the representation of this
           table for the 'managing' switch.

           In order to process SNMP SetRequests that make parameter
           changes for the relevant types of servers (e.g., to the
           Zoning Database), the SNMP agent must get serialized access
           to the Fabric (for the relevant type of management data),
           i.e., the Fabric must be locked by creating an entry in
           this table via an SNMP SetRequest.  Creating an entry in
           this table via an SNMP SetRequest causes an ACA or an EACA
           to be sent to all other switches in the Fabric.  The value
           of t11FLockApplicationID for such an entry determines
           whether an ACA or an EACA is sent.

           If an entry in this table is created by an SNMP SetRequest,
           the value of the t11FLockInitiatorType object in that entry
           will normally be 'snmp'.  A row for which the value of
           t11FLockInitiatorType is not 'snmp' cannot be modified
           via SNMP.  In particular, it cannot be deleted via
           t11FLockRowStatus.  Note that it's possible for a row to be
           created by an SNMP SetRequest, but for the setup of the lock
           to fail, and immediately thereafter be replaced by a lock
           successfully set up by some other means; in such a case, the
           value of t11FLockInitiatorType would change as and when the



           lock was set up by the other means, and so the row could
           not thereafter be deleted via t11FLockRowStatus.

           FC-GS-5 mentions various error situations in which a
           Fabric lock is released so as to avoid a deadlock.  In
           such situations, the agent removes the corresponding row
           in this table as and when the lock is released.  This can
           happen for all values of t11FLockInitiatorType."
    REFERENCE
           "Fibre Channel - Generic Services-5 (FC-GS-5),
           ANSI INCITS 427-2007, sections 4.9.5.5 and 6.4.7.1.

           Fibre Channel - Switch Fabric-4 (FC-SW-4),
           ANSI INCITS 418-2006, sections 6.1.17, 10.6.6, and 13.2,
           and table 116.

           'FC-SW-5 Letter to T11.5' ANSI INCITS T11/06-679v0,
           http://www.t11.org/ftp/t11/pub/fc/sw-5/06-679v0.pdf,
           21 September 2006."
    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FLockFabricIndex,
              t11FLockApplicationID }
    ::= { t11FLockTable 1 }

T11FLockEntry ::= SEQUENCE {
    t11FLockFabricIndex             T11FabricIndex,
    t11FLockApplicationID           OCTET STRING,
    t11FLockInitiatorType           INTEGER,
    t11FLockInitiator               OCTET STRING,
    t11FLockInitiatorIpAddrType     InetAddressType,
    t11FLockInitiatorIpAddr         InetAddress,
    t11FLockStatus                  INTEGER,
    t11FLockRejectReasonCode        T11NsGs4RejectReasonCode,
    t11FLockRejectReasonCodeExp     OCTET STRING,
    t11FLockRejectReasonVendorCode  OCTET STRING,
    t11FLockRowStatus               RowStatus
}

t11FLockFabricIndex OBJECT-TYPE
    SYNTAX       T11FabricIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "A unique index value that uniquely identifies a
           particular Fabric.

           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
           can operate within one (or more) physical infrastructures,
           and this index value is used to uniquely identify a



           particular (physical or virtual) Fabric within a physical
           infrastructure.

           In a Fabric conformant to versions earlier than FC-SW-4,
           only a single Fabric could operate within a physical
           infrastructure, and thus, the value of this Fabric Index
           was defined to always be 1."
    ::= { t11FLockEntry 1 }

t11FLockApplicationID OBJECT-TYPE
    SYNTAX       OCTET STRING (SIZE (1))
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "The Application_ID value that identifies the type of
           application for which the Fabric is locked.

           A lock established via Acquire Change Authorization (ACA)
           does not, strictly speaking, have an Application_ID value.
           However, the value 'FF'h (255 decimal) has been reserved
           by T11 to be used as the value of this MIB object as and
           when a lock is established by an ACA.  This value was
           initially documented in a letter from the FC-SW-5 Editor
           to T11.5, which was approved by the T11 and T11.5 plenary
           meetings on October 5, 2006."
    REFERENCE
           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
           ANSI INCITS 418-2006, April 2006, Table 116.

           'FC-SW-5 Letter to T11.5' ANSI INCITS T11/06-679v0,
           http://www.t11.org/ftp/t11/pub/fc/sw-5/06-679v0.pdf,
           21 September 2006."
    ::= { t11FLockEntry 2 }

t11FLockInitiatorType OBJECT-TYPE
    SYNTAX        INTEGER {
                      other(1),
                      ssb(2),
                      cli(3),
                      snmp(4)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "This object specifies what type of initiator generated
           the request that caused this lock to be established:

               other     - none of the following.



               ssb       - this lock was established due to the
                           receipt of an SSB, e.g., from a GS-5
                           client.
               cli       - this lock was established in order
                           to process a Command Line Interface
                           (CLI) command.
               snmp      - this lock was established as a result
                           of an SNMP SetRequest.
           "
    ::= { t11FLockEntry 3 }

t11FLockInitiator OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(0..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
           "This object specifies the initiator whose request
           caused this lock to be established.

           If the value of the corresponding instance
           of t11FLockInitiatorType is 'ssb', this
           object will contain the FC_ID of the client
           that issued the Server Session Begin (SSB)
           that required the lock to be established.

           If the value of the corresponding instance
           of t11FLockInitiatorType object is 'cli', this
           object will contain the user name of the CLI
           (Command Line Interface) user on whose behalf
           the lock was established.

           If the value of the corresponding instance of
           t11FLockInitiatorType is 'snmp', this object
           will contain the SNMP securityName used by the
           SNMPv3 message containing the SetRequest that
           created this row.  (If the row was created via
           SNMPv1 or SNMPv2c, then the appropriate value of
           the snmpCommunitySecurityName is used.)"
    REFERENCE
           "Fibre Channel - Generic Services-5 (FC-GS-5),
           ANSI INCITS 427-2007, section 4.9.5.2.

           SNMP securityName is defined in RFC 3411, 'An
           Architecture for Describing Simple Network
           Management Protocol (SNMP) Management Frameworks'.

           snmpCommunitySecurityName is defined in RFC 3584,
           'Coexistence between Version 1, Version 2, and



           Version 3 of the Internet-standard Network
           Management Framework.'"
    ::= { t11FLockEntry 4 }

t11FLockInitiatorIpAddrType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
           "This object specifies the type of IP address contained
           in the corresponding instance of t11FLockInitiatorIpAddr.
           If the IP address of the location of the initiator is
           unknown or not applicable, this object has the value:
           'unknown'."
    ::= { t11FLockEntry 5 }

t11FLockInitiatorIpAddr OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
           "This object specifies the IP address of the location
           of the initiator that established this lock via a
           request of the type given by the corresponding instance
           of t11FLockInitiatorType.  In cases where the
           corresponding instance of t11FLockInitiatorIpAddrType has
           the value: 'unknown', the value of this object is the
           zero-length string."
    ::= { t11FLockEntry 6 }

t11FLockStatus OBJECT-TYPE
    SYNTAX        INTEGER {
                      active(1),
                      settingUp(2),
                      rejectFailure(3),
                      otherFailure(4)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "This object gives the current status of the lock:

              'active'        -- the lock is currently established.
              'settingUp'     -- the 'managing' switch is currently
                                 attempting to set up the lock, e.g.,
                                 it is waiting to receive Accepts
                                 for ACAs from every switch in the
                                 Fabric.



              'rejectFailure' -- the 'managing' switch's attempt to
                                 set up the lock was rejected with
                                 the reason codes given by:
                                    t11FLockRejectReasonCode,
                                    t11FLockRejectReasonCodeExp and
                                    t11FLockRejectReasonVendorCode.
              'otherFailure'  -- the 'managing' switch's attempt
                                 to set up the lock failed (but no
                                 reason codes are available).

           For values of t11FLockInitiatorType other than 'snmp',
           a row is only required to be instantiated in this table
           when the value of this object is 'active'.

           If the value of the corresponding instance of
           t11FLockInitiatorType is 'snmp', the initial value of this
           object when the row is first created is 'settingUp'.  As
           and when the setup succeeds, the value transitions to
           'active'.  If the setup fails, the value transitions to
           either 'rejectFailure' or 'otherFailure'.  Note that such a
           failure value is overwritten on the next attempt to obtain
           the lock, which could be immediately after the failure,
           e.g., by a GS-5 client.

           When the value of this object is 'rejectFailure', the
           rejection's reason codes are given by the corresponding
           values of t11FLockRejectReasonCode,
           t11FLockRejectReasonCodeExp and
           t11FLockRejectReasonVendorCode."
    ::= { t11FLockEntry 7 }

t11FLockRejectReasonCode OBJECT-TYPE
    SYNTAX        T11NsGs4RejectReasonCode
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "When the value of the corresponding instance of
           t11FLockStatus is 'rejectFailure', this object contains
           the rejection's reason code."
    REFERENCE
           "Fibre Channel - Generic Services-5 (FC-GS-5),
           ANSI INCITS 427-2007, section 4.4.4 and table 10."
    ::= { t11FLockEntry 8 }

t11FLockRejectReasonCodeExp OBJECT-TYPE
    SYNTAX        OCTET STRING (SIZE(0 | 1))
    MAX-ACCESS    read-only
    STATUS        current



    DESCRIPTION
           "When the value of the corresponding instance of
           t11FLockStatus is 'rejectFailure', this object contains
           the rejection's reason code explanation."
    REFERENCE
           "Fibre Channel - Generic Services-5 (FC-GS-5),
           ANSI INCITS 427-2007, sections 4.4.4 and 6.4.9,
           tables 10 and 252."
    ::= { t11FLockEntry 9 }

t11FLockRejectReasonVendorCode OBJECT-TYPE
    SYNTAX        OCTET STRING (SIZE(0 | 1))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "When the value of the corresponding instance of
           t11FLockStatus is 'rejectFailure', this object contains
           the rejection's vendor-specific code."
    REFERENCE
           "Fibre Channel - Generic Services-5 (FC-GS-5),
           ANSI INCITS 427-2007, section 4.4.4."
    ::= { t11FLockEntry 10 }

t11FLockRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
           "The status of this conceptual row.

           A row in this table can be modified or deleted via
           this object only when the row's value of
           t11FLockInitiatorType is 'snmp'."
    ::= { t11FLockEntry 11 }

-- Conformance

t11FLockMIBCompliances
                     OBJECT IDENTIFIER ::= { t11FLockMIBConformance 1 }
t11FLockMIBGroups    OBJECT IDENTIFIER ::= { t11FLockMIBConformance 2 }

t11FLockMIBCompliance MODULE-COMPLIANCE
    STATUS       current
    DESCRIPTION
           "The compliance statement for entities that support
           Fabric locks in support of GS-5 Server applications."
    MODULE MANDATORY-GROUPS { t11FLockActiveGroup }




    OBJECT       t11FLockRowStatus
    MIN-ACCESS   read-only
    DESCRIPTION
           "Write access is not required."

    ::= { t11FLockMIBCompliances 1 }

-- Units of Conformance

t11FLockActiveGroup OBJECT-GROUP
    OBJECTS  { t11FLockInitiatorType,
               t11FLockInitiator,
               t11FLockInitiatorIpAddrType,
               t11FLockInitiatorIpAddr,
               t11FLockStatus,
               t11FLockRejectReasonCode,
               t11FLockRejectReasonCodeExp,
               t11FLockRejectReasonVendorCode,
               t11FLockRowStatus
             }
    STATUS   current
    DESCRIPTION
           "A collection of objects containing information
           about current Fabric locks."
    ::= { t11FLockMIBGroups 1 }

END

ZeroDay Forums Mini