Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
T11-FC-ROUTE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, mib-2 FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580]
RowStatus, TimeStamp,
StorageType FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
fcmInstanceIndex, fcmSwitchIndex,
FcAddressIdOrZero, FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]
T11FabricIndex FROM T11-TC-MIB; -- [RFC4439]
t11FcRouteMIB MODULE-IDENTITY
LAST-UPDATED "200608140000Z"
ORGANIZATION "T11"
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA USA 95134
Email: kzm@cisco.com"
DESCRIPTION
"The MIB module for configuring and displaying Fibre
Channel Route Information.
Copyright (C) The Internet Society (2006). This version
of this MIB module is part of RFC 4625; see the RFC
itself for full legal notices."
REVISION "200608140000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC4625."
::= {mib-2 144 }
t11FcRouteNotifications OBJECT IDENTIFIER ::= { t11FcRouteMIB 0 }
t11FcRouteObjects OBJECT IDENTIFIER ::= { t11FcRouteMIB 1 }
t11FcRouteConformance OBJECT IDENTIFIER ::= { t11FcRouteMIB 2 }
--
-- Per-Fabric routing information
--
t11FcRouteFabricTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcRouteFabricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing Fibre Channel Routing information
that is specific to a Fabric."
::= { t11FcRouteObjects 1 }
t11FcRouteFabricEntry OBJECT-TYPE
SYNTAX T11FcRouteFabricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains routing information specific to a
particular Fabric on a particular switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcRouteFabricIndex }
::= { t11FcRouteFabricTable 1 }
T11FcRouteFabricEntry ::=
SEQUENCE {
t11FcRouteFabricIndex T11FabricIndex,
t11FcRouteFabricLastChange TimeStamp
}
t11FcRouteFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique index value that uniquely identifies a
particular Fabric.
In a Fabric conformant to FC-SW-3, only a single Fabric
can operate within a physical infrastructure, and thus
the value of this Fabric Index will always be 1.
In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
can operate within one (or more) physical infrastructures.
In such a case, index value is used to uniquely identify a
particular Fabric within a physical infrastructure."
::= { t11FcRouteFabricEntry 1 }
t11FcRouteFabricLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent time when any
corresponding row in the t11FcRouteTable was created,
modified, or deleted. A corresponding row in the
t11FcRouteTable is for the same management instance,
the same switch, and same Fabric as the row in this table.
If no change has occurred since the last restart of the
management system, then the value of this object is 0."
::= { t11FcRouteFabricEntry 2 }
--
-- Fibre Channel Routing table
--
t11FcRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Fibre Channel Routing tables for the
locally managed switches. This table lists all the
routes that are configured in and/or computed by any
local switch for any Fabric.
Such routes are used by a switch to forward frames (of user
data) on a Fabric. The conceptual process is based on
extracting the Destination Fibre Channel Address Identifier
(D_ID) out of a received frame (of user data) and comparing
it to each entry of this table that is applicable to the
given switch and Fabric. Such comparison consists of first
performing a logical-AND of the extracted D_ID with a mask
(the value of t11FcRouteDestMask) and second comparing the
result of that 'AND' operation to the value of
t11FcRouteDestAddrId. A similar comparison is made of the
Source Fibre Channel Address Identifier (S_ID) of a frame
against the t11FcRouteSrcAddrId and t11FcRouteSrcMask values
of an entry. If an entry's value of t11FcRouteInInterface
is non-zero, then a further comparison determines if the
frame was received on the appropriate interface. If all of
these comparisons for a particular entry are successful,
then that entry represents a potential route for forwarding
the received frame.
For entries configured by a user, t11FcRouteProto has
the value 'netmgmt'; only entries of this type can be
deleted by the user."
::= { t11FcRouteObjects 2 }
t11FcRouteEntry OBJECT-TYPE
SYNTAX T11FcRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a route to a particular destination,
possibly from a particular subset of source addresses,
on a particular Fabric via a particular output interface
and learned in a particular manner."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcRouteFabricIndex,
t11FcRouteDestAddrId, t11FcRouteDestMask,
t11FcRouteSrcAddrId, t11FcRouteSrcMask,
t11FcRouteInInterface, t11FcRouteProto,
t11FcRouteOutInterface }
::= { t11FcRouteTable 1 }
T11FcRouteEntry ::=
SEQUENCE {
t11FcRouteDestAddrId FcAddressIdOrZero,
t11FcRouteDestMask FcAddressIdOrZero,
t11FcRouteSrcAddrId FcAddressIdOrZero,
t11FcRouteSrcMask FcAddressIdOrZero,
t11FcRouteInInterface InterfaceIndexOrZero,
t11FcRouteProto INTEGER,
t11FcRouteOutInterface InterfaceIndex,
t11FcRouteDomainId FcDomainIdOrZero,
t11FcRouteMetric Unsigned32,
t11FcRouteType INTEGER,
t11FcRouteIfDown INTEGER,
t11FcRouteStorageType StorageType,
t11FcRouteRowStatus RowStatus
}
t11FcRouteDestAddrId OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination Fibre Channel Address Identifier of
this route. A zero-length string for this field is
not allowed."
::= { t11FcRouteEntry 1 }
t11FcRouteDestMask OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask to be logical-ANDed with a destination
Fibre Channel Address Identifier before it is compared
to the value in the t11FcRouteDestAddrId field.
Allowed values are 255.255.255, 255.255.0, or 255.0.0.
FSPF's definition generates routes to a Domain_ID,
so the mask for all FSPF-generated routes is 255.0.0.
The zero-length value has the same meaning as 0.0.0."
::= { t11FcRouteEntry 2 }
t11FcRouteSrcAddrId OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source Fibre Channel Address Identifier of this
route. Note that if this object and the corresponding
instance of t11FcRouteSrcMask both have a value of 0.0.0,
then this route matches all source addresses. The
zero-length value has the same meaning as 0.0.0."
::= { t11FcRouteEntry 3 }
t11FcRouteSrcMask OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask to be logical-ANDed with a source
Fibre Channel Address Identifier before it is compared
to the value in the t11FcRouteSrcAddrId field. Allowed
values are 255.255.255, 255.255.0, 255.0.0, or 0.0.0.
The zero-length value has the same meaning as 0.0.0."
::= { t11FcRouteEntry 4 }
t11FcRouteInInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is non-zero, it is the
value of ifIndex that identifies the local
Fibre Channel interface through which a frame
must have been received in order to match with
this entry. If the value of this object is zero,
the matching does not require that the frame be
received on any specific interface."
::= { t11FcRouteEntry 5 }
t11FcRouteProto OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
netmgmt(3),
fspf(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mechanism via which this route was learned:
other(1) - not specified
local(2) - local interface
netmgmt(3)- static route
fspf(4) - Fibre Shortest Path First
"
::= { t11FcRouteEntry 6 }
t11FcRouteOutInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex that identifies the local
Fibre Channel interface through which the next hop
of this route is to be reached."
::= { t11FcRouteEntry 7 }
t11FcRouteDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The domain_ID of next hop switch.
This object can have a value of zero if the value
of t11FcRouteProto is 'local'."
::= { t11FcRouteEntry 8 }
t11FcRouteMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing metric for this route.
The use of this object is dependent on t11FcRouteProto."
::= { t11FcRouteEntry 9 }
t11FcRouteType OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remote(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of route.
local(1) - a route for which the next Fibre Channel
port is the final destination;
remote(2) - a route for which the next Fibre Channel
port is not the final destination."
DEFVAL {local}
::= { t11FcRouteEntry 10 }
t11FcRouteIfDown OBJECT-TYPE
SYNTAX INTEGER {
remove(1),
retain(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates what happens to
this route when the output interface (given by the
corresponding value of t11FcRouteOutInterface) is
operationally 'down'. If this object's value is 'retain',
the route is to be retained in this table. If this
object's value is 'remove', the route is to be removed
from this table."
DEFVAL { retain }
::= { t11FcRouteEntry 11 }
t11FcRouteStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { t11FcRouteEntry 12 }
t11FcRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The only rows that can be deleted by setting this object to
'destroy' are those for which t11FcRouteProto has the value
'netmgmt'."
::= { t11FcRouteEntry 13 }
--
-- Conformance
--
t11FcRouteCompliances OBJECT IDENTIFIER
::= { t11FcRouteConformance 1 }
t11FcRouteGroups OBJECT IDENTIFIER
::= { t11FcRouteConformance 2 }
t11FcRouteCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
implement the T11-FC-ROUTE-MIB.
--
-- Note: The next four OBJECT clauses are for auxiliary objects, and the
-- SMIv2 does not permit inclusion of objects that are not accessible
-- in an OBJECT clause (see Sections 3.1 & 5.4.3 in STD 58, RFC 2580).
-- Thus, these four clauses cannot be included below in the normal
-- location for OBJECT clauses.
--
-- OBJECT t11FcRouteSrcAddrId
-- SYNTAX FcAddressIdOrZero (SIZE (0))
-- DESCRIPTION
-- 'Support is not required for routes that
-- match only a subset of possible source
-- addresses.'
--
-- OBJECT t11FcRouteSrcMask
-- SYNTAX FcAddressIdOrZero (SIZE (0))
-- DESCRIPTION
-- 'Support is not required for routes that
-- match only a subset of possible source
-- addresses.'
--
-- OBJECT t11FcRouteDestMask
-- DESCRIPTION
-- 'Support is mandatory only for FSPF-generated
-- routes. Since FSPF's definition generates
-- routes to a Domain_ID, the mask for all
-- FSPF-generated routes is 255.0.0. Thus,
-- support is only required for 255.0.0.'
--
-- OBJECT t11FcRouteInInterface
-- SYNTAX InterfaceIndexOrZero (0)
-- DESCRIPTION
-- 'Support for routes specific to particular
-- source interfaces is not required.'
"
MODULE -- this module
MANDATORY-GROUPS { t11FcRouteGroup }
OBJECT t11FcRouteIfDown
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcRouteDomainId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcRouteMetric
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcRouteType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcRouteStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcRouteRowStatus
SYNTAX INTEGER { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { t11FcRouteCompliances 1 }
t11FcRouteGroup OBJECT-GROUP
OBJECTS { t11FcRouteFabricLastChange,
t11FcRouteDomainId,
t11FcRouteMetric,
t11FcRouteType,
t11FcRouteIfDown,
t11FcRouteStorageType,
t11FcRouteRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for displaying and configuring
routes."
::= { t11FcRouteGroups 1 }
END