Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
T11-FC-VIRTUAL-FABRIC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, mib-2 FROM SNMPv2-SMI -- [RFC2578] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] RowStatus, StorageType FROM SNMPv2-TC -- [RFC2579] InterfaceIndex FROM IF-MIB -- [RFC2863] fcmInstanceIndex, FcNameIdOrZero, fcmPortEntry, fcmSwitchEntry FROM FC-MGMT-MIB -- [RFC4044] T11FabricIndex FROM T11-TC-MIB; -- [RFC4439] t11FcVirtualFabricMIB MODULE-IDENTITY LAST-UPDATED "200611100000Z" ORGANIZATION "IETF IMSS (Internet and Management Support for Storage) Working Group" CONTACT-INFO " Scott Kipp McDATA Corporation Tel: +1 720 558-3452 E-mail: scott.kipp@mcdata.com Postal: 4 McDATA Parkway Broomfield, CO USA 80021 G D Ramkumar SnapTell, Inc. Tel: +1 650-326-7627 E-mail: gramkumar@stanfordalumni.org Postal: 2741 Middlefield Rd, Suite 200 Palo Alto, CA USA 94306 Keith McCloghrie Cisco Systems, Inc. Tel: +1 408 526-5260 E-mail: kzm@cisco.com Postal: 170 West Tasman Drive San Jose, CA USA 95134 " DESCRIPTION "This module defines management information specific to Fibre Channel Virtual Fabrics. A Virtual Fabric is a Fabric composed of partitions of switches, links and N_Ports with a single Fabric management domain, Fabric Services and independence from other Virtual Fabrics. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of RFC 4747; see the RFC itself for full legal notices." REVISION "200611100000Z" DESCRIPTION "Initial version of this MIB module, published as RFC 4747." ::= { mib-2 147 } t11vfObjects OBJECT IDENTIFIER ::= { t11FcVirtualFabricMIB 1 } t11vfConformance OBJECT IDENTIFIER ::= { t11FcVirtualFabricMIB 2 } --******************************** -- MIB object definitions -- t11vfCoreSwitchTable OBJECT-TYPE SYNTAX SEQUENCE OF T11vfCoreSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of core switches supported by the current management entity." ::= { t11vfObjects 1 } t11vfCoreSwitchEntry OBJECT-TYPE SYNTAX T11vfCoreSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents one core switch." INDEX { fcmInstanceIndex, t11vfCoreSwitchSwitchName } ::= { t11vfCoreSwitchTable 1} T11vfCoreSwitchEntry ::= SEQUENCE { t11vfCoreSwitchSwitchName FcNameIdOrZero, t11vfCoreSwitchMaxSupported Unsigned32, t11vfCoreSwitchStorageType StorageType } t11vfCoreSwitchSwitchName OBJECT-TYPE SYNTAX FcNameIdOrZero (SIZE(8 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Core Switch_Name (WWN) of this Core Switch." ::= { t11vfCoreSwitchEntry 1 } t11vfCoreSwitchMaxSupported OBJECT-TYPE SYNTAX Unsigned32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "In switches that do not support Virtual Fabrics, this object has the value of 1. If Virtual Fabrics are supported, this object is the maximum number of Virtual Fabrics supported by the Core Switch. For the purpose of this count, the Control VF_ID is ignored." ::= { t11vfCoreSwitchEntry 2 } t11vfCoreSwitchStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { t11vfCoreSwitchEntry 3 } -- Virtual Switch table t11vfVirtualSwitchTable OBJECT-TYPE SYNTAX SEQUENCE OF T11vfVirtualSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Virtual Switches. When one Core Switch provides switching functions for multiple Virtual Fabrics, that Core Switch is modeled as containing multiple Virtual Switches, one for each Virtual Fabric. This table contains one row for every Virtual Switch on every Core Switch. This table augments the basic switch information in the fcmSwitchTable Table in the FC-MGMT-MIB." REFERENCE "fcmSwitchTable is defined in the FC-MGMT-MIB [RFC4044]." ::= { t11vfObjects 2 } t11vfVirtualSwitchEntry OBJECT-TYPE SYNTAX T11vfVirtualSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the Virtual Switch table. Each row is for a Virtual Switch. This table augments the fcmSwitchTable, i.e., every entry in this table has a one-to-one correspondence with an entry in the fcmSwitchTable. At the time when the fcmSwitchTable was defined, it applied to physical switches. With the definition and usage of virtual switches, fcmSwitchTable now applies to virtual switches as well as physical switches, and (in contrast to physical switches) it is appropriate to provide the capability for virtual switches to be created via remote management applications, e.g., via SNMP. So, this entry contains a RowStatus object (to allow the creation of a virtual switch), as well as a StorageType object. Obviously, if a row is created/deleted in this table, the corresponding row in the fcmSwitchTable will be created/deleted." REFERENCE "fcmSwitchEntry is defined in the FC-MGMT-MIB module [RFC4044]." AUGMENTS { fcmSwitchEntry } ::= { t11vfVirtualSwitchTable 1} T11vfVirtualSwitchEntry ::= SEQUENCE { t11vfVirtualSwitchVfId T11FabricIndex, t11vfVirtualSwitchCoreSwitchName FcNameIdOrZero, t11vfVirtualSwitchRowStatus RowStatus, t11vfVirtualSwitchStorageType StorageType } t11vfVirtualSwitchVfId OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The VF_ID of the Virtual Fabric for which this virtual switch performs its switching function. The Control VF_ID is implicitly enabled and is not set. Communication with the Control VF_ID is required." REFERENCE "FC-SW-4, REV 7.5, section 12.2" ::= { t11vfVirtualSwitchEntry 1 } t11vfVirtualSwitchCoreSwitchName OBJECT-TYPE SYNTAX FcNameIdOrZero (SIZE(8 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Core Switch_Name (WWN) of the Core Switch that contains this Virtual Switch." REFERENCE "FC-SW-4, REV 7.5, section 12.2." ::= { t11vfVirtualSwitchEntry 2 } t11vfVirtualSwitchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row." ::= { t11vfVirtualSwitchEntry 3 } t11vfVirtualSwitchStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { t11vfVirtualSwitchEntry 4 } -- Port table t11vfPortTable OBJECT-TYPE SYNTAX SEQUENCE OF T11vfPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Port attributes related to Virtual Fabrics." ::= { t11vfObjects 3 } t11vfPortEntry OBJECT-TYPE SYNTAX T11vfPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a physical Port on a switch. Switches that support Virtual Fabrics would add these four additional columns to the fcmPortEntry row." REFERENCE "fcmPortEntry is defined in the FC-MGMT-MIB module." AUGMENTS { fcmPortEntry } ::= { t11vfPortTable 1} T11vfPortEntry ::= SEQUENCE { t11vfPortVfId T11FabricIndex, t11vfPortTaggingAdminStatus INTEGER, t11vfPortTaggingOperStatus INTEGER, t11vfPortStorageType StorageType } t11vfPortVfId OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The Port VF_ID assigned to this Port. The Port VF_ID is the default Virtual Fabric that is assigned to untagged frames arriving at this Port. The Control VF_ID is implicitly enabled and is not set. Communication with the Control VF_ID is required." REFERENCE "FC-SW-4, REV 7.5, section 12.1" DEFVAL {1} ::= { t11vfPortEntry 1 } t11vfPortTaggingAdminStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure the administrative status of Virtual Fabric tagging on this Port. SET operation Description -------------- ------------------------------------------- off(1) To disable Virtual Fabric tagging on this Port. on(2) To enable Virtual Fabric tagging on this Port if the attached Port doesn't prohibit it. auto(3) To enable Virtual Fabric tagging if the peer requests it." REFERENCE "FC-SW-4, REV 7.5, section 12.4" ::= { t11vfPortEntry 2 } t11vfPortTaggingOperStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to report the operational status of Virtual Fabric tagging on this Port. SET operation Description -------------- ------------------------------------------- off(1) Virtual Fabric tagging is disabled on this Port. on(2) Virtual Fabric tagging is enabled on this Port." REFERENCE "FC-SW-4, REV 7.5, section 12.4" ::= { t11vfPortEntry 3 } t11vfPortStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type for this conceptual row, and for the corresponding row in the augmented fcmPortTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { t11vfPortEntry 4 } -- Locally Enabled Table t11vfLocallyEnabledTable OBJECT-TYPE SYNTAX SEQUENCE OF T11vfLocallyEnabledEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for assigning and reporting operational status of locally-enabled Virtual Fabric IDs to Ports. The set of Virtual Fabrics operational on the Port is the bit-wise 'AND' of the set of locally-enabled VF_IDs of this Port and the locally-enabled VF_IDs of the attached Port." ::= { t11vfObjects 4 } t11vfLocallyEnabledEntry OBJECT-TYPE SYNTAX T11vfLocallyEnabledEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for each locally-enabled VF_ID on each Port." REFERENCE "FC-SW-4, REV 7.5, section 12.4" INDEX { t11vfLocallyEnabledPortIfIndex, t11vfLocallyEnabledVfId } ::= { t11vfLocallyEnabledTable 1} T11vfLocallyEnabledEntry ::= SEQUENCE { t11vfLocallyEnabledPortIfIndex InterfaceIndex, t11vfLocallyEnabledVfId T11FabricIndex, t11vfLocallyEnabledOperStatus INTEGER, t11vfLocallyEnabledRowStatus RowStatus, t11vfLocallyEnabledStorageType StorageType } t11vfLocallyEnabledPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the ifIndex that identifies the Port." ::= { t11vfLocallyEnabledEntry 1 } t11vfLocallyEnabledVfId OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally-enabled VF_ID on this Port." ::= { t11vfLocallyEnabledEntry 2 } t11vfLocallyEnabledOperStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to report the operational status of Virtual Fabric tagging on this Port. SET operation Description -------------- ------------------------------------------- off(1) Virtual Fabric tagging is disabled on this Port. on(2) Virtual Fabric tagging is enabled on this Port." REFERENCE "FC-SW-4, REV 7.3, section 12.4" ::= { t11vfLocallyEnabledEntry 3 } t11vfLocallyEnabledRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. When a row in this table is in 'active(1)' state, no object in that row can be modified except t11vfLocallyEnabledRowStatus and t11vfLocallyEnabledStorageType." ::= { t11vfLocallyEnabledEntry 4 } t11vfLocallyEnabledStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { t11vfLocallyEnabledEntry 5 } --******************************** -- Conformance Section -- t11vfMIBCompliances OBJECT IDENTIFIER ::= { t11vfConformance 1 } t11vfMIBGroups OBJECT IDENTIFIER ::= { t11vfConformance 2 } t11vfMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for compliance to the Fibre Channel Virtual Fabric MIB." MODULE -- this module MANDATORY-GROUPS { t11vfGeneralGroup } OBJECT t11vfCoreSwitchMaxSupported MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfCoreSwitchStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfVirtualSwitchVfId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfVirtualSwitchRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfVirtualSwitchStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfPortVfId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfPortTaggingAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfPortStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfLocallyEnabledRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11vfLocallyEnabledStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { t11vfMIBCompliances 1 } -- Units of conformance t11vfGeneralGroup OBJECT-GROUP OBJECTS { t11vfCoreSwitchMaxSupported, t11vfVirtualSwitchVfId, t11vfVirtualSwitchCoreSwitchName, t11vfVirtualSwitchRowStatus, t11vfPortVfId, t11vfPortTaggingAdminStatus, t11vfLocallyEnabledOperStatus, t11vfPortTaggingOperStatus, t11vfLocallyEnabledRowStatus, t11vfCoreSwitchStorageType, t11vfVirtualSwitchStorageType, t11vfPortStorageType, t11vfLocallyEnabledStorageType } STATUS current DESCRIPTION "A collection of objects for monitoring and configuring Virtual Fabrics in a Fibre Channel switch." ::= { t11vfMIBGroups 1 } END