Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
TE-LINK-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, transmission, Integer32, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, RowStatus, StorageType
FROM SNMPv2-TC
InterfaceIndexOrZero, ifIndex
FROM IF-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
teLinkStdMIB MODULE-IDENTITY
LAST-UPDATED "200510110000Z" -- 11 October 2005
ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
" Martin Dubuc
Email: mdubuc@ncf.ca
Thomas D. Nadeau
Email: tnadeau@cisco.com
Jonathan P. Lang
Email: jplang@ieee.org
Comments about this document should be emailed directly to
the MPLS working group mailing list at mpls@uu.net."
DESCRIPTION
"Copyright (C) 2005 The Internet Society. This version of
this MIB module is part of RFC 4220; see the RFC
itself for full legal notices.
This MIB module contains managed object definitions for
MPLS traffic engineering links as defined in
'Link Bundling in MPLS Traffic Engineering (TE)'."
-- Revision history.
REVISION
"200510110000Z" -- 11 October 2005
DESCRIPTION
"Initial version published as RFC 4220."
::= { transmission 200 }
-- Textual Conventions
TeLinkBandwidth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is used to represent link bandwidth in bps. This
value is represented using a 4 octet IEEE floating point
format [IEEE]. The floating point representation is not
used to represent fractional value but rather to allow
specification of large numbers that cannot be expressed
with 32-bit integers."
REFERENCE
"IEEE Standard for Binary Floating-Point Arithmetic,
Standard 754-1985"
SYNTAX OCTET STRING (SIZE(4))
TeLinkPriority ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This type is used to represent a priority. Each connection
is assigned a priority. This priority is used when
accounting for bandwidth on TE links or component
links, for resource allocation and for rerouting purposes.
Value 0 is the highest priority. Value 7 is the lowest
priority."
SYNTAX Unsigned32 (0..7)
TeLinkProtection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Link protection."
SYNTAX INTEGER {
primary(1),
secondary(2)
}
TeLinkSwitchingCapability ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Switching capability as specified in the 'OSPF Extensions in
Support of Generalized Multi-Protocol Label Switching
(GMPLS)' document. The values specified in this document
are not contiguous."
SYNTAX INTEGER {
packetSwitch1(1),
packetSwitch2(2),
packetSwitch3(3),
packetSwitch4(4),
layer2Switch(51),
tdm(100),
lambdaSwitch(150),
fiberSwitch(200)
}
TeLinkEncodingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Link encoding type as specified in 'Generalized
Multi-Protocol Label Switching (GMPLS) Signaling
Functional Description' document. The values
specified in this document are not contiguous."
SYNTAX INTEGER {
packet(1),
ethernet(2),
ansiEtsiPdh(3),
sdhItuSonetAnsi(5),
digitalWrapper(7),
lambda(8),
fiber(9),
fiberChannel(11)
}
TeLinkSonetSdhIndication ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This convention is used to indicate whether the interface
supports Standard or Arbitrary SONET/SDH. To simplify the
mapping process, the values used in this textual convention
match the values specified in the interface switching
capability specific information field, i.e., 0 for Standard
SONET/SDH and 1 for Arbitrary SONET/SDH."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
SYNTAX INTEGER {
standard(0),
arbitrary(1)
}
-- Top level components of this MIB module
-- Notifications
teLinkNotifications OBJECT IDENTIFIER ::= { teLinkStdMIB 0 }
-- Tables, Scalars
teLinkObjects OBJECT IDENTIFIER ::= { teLinkStdMIB 1 }
-- Conformance
teLinkConformance OBJECT IDENTIFIER ::= { teLinkStdMIB 2 }
-- TE Link Table
teLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TeLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the grouping of component links into
TE links and the grouping of TE links into bundled links."
::= { teLinkObjects 1 }
teLinkEntry OBJECT-TYPE
SYNTAX TeLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table exists for each ifEntry with an
ifType of teLink(200), i.e., for every TE link. An ifEntry
in the ifTable must exist before a teLinkEntry is created
with the corresponding ifIndex. If a TE link entry in the
ifTable is destroyed, then so is the corresponding entry
in the teLinkTable. The administrative and operational
status values are controlled from the ifEntry."
INDEX { ifIndex }
::= { teLinkTable 1 }
TeLinkEntry ::= SEQUENCE {
teLinkAddressType InetAddressType,
teLinkLocalIpAddr InetAddress,
teLinkRemoteIpAddr InetAddress,
teLinkMetric Unsigned32,
teLinkMaximumReservableBandwidth TeLinkBandwidth,
teLinkProtectionType INTEGER,
teLinkWorkingPriority TeLinkPriority,
teLinkResourceClass Unsigned32,
teLinkIncomingIfId Integer32,
teLinkOutgoingIfId InterfaceIndexOrZero,
teLinkRowStatus RowStatus,
teLinkStorageType StorageType
}
teLinkAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of Internet address for the TE link."
::= { teLinkEntry 1 }
teLinkLocalIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local Internet address for numbered links. The type of
this address is determined by the value of the
teLinkAddressType object.
For IPv4 and IPv6 numbered links, this object represents the
local IP address associated with the TE link. For an
unnumbered link, the local address is of type unknown, this
object is set to the zero length string, and the
teLinkOutgoingIfId object then identifies the unnumbered
address.
If the TE link is a Forwarding Adjacency (FA), the local
IP address is set to the head-end address of the FA-LSP.
If ipAddrTable is implemented, this object must have the
same value as the ipAdEntAddr object that belongs to the
row in ipAddrTable where ipAdEntIfIndex is equal to
ifIndex."
::= { teLinkEntry 2 }
teLinkRemoteIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote Internet address for numbered links. The type of
this address is determined by the value of the
teLinkAddressType object.
The remote IP address associated with the TE link (IPv4 and
IPv6 numbered links). For an unnumbered link, the remote
address is of type unknown, this object is set to the
zero length string, and the teLinkIncomingIfId object then
identifies the unnumbered address.
If the TE link is a Forwarding Adjacency, the remote IP
address is set to the tail-end address of the FA-LSP."
::= { teLinkEntry 3 }
teLinkMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The traffic engineering metric for the TE link is
derived from its component links. All component links
within the TE link must have the same traffic
engineering metric."
REFERENCE
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
::= { teLinkEntry 4 }
teLinkMaximumReservableBandwidth OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum reservable bandwidth on
the TE link. This is the union of the maximum reservable
bandwidth of all the component links within the
TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkEntry 5 }
teLinkProtectionType OBJECT-TYPE
SYNTAX INTEGER {
extraTraffic(1),
unprotected(2),
shared(3),
dedicated1For1(4),
dedicated1Plus1(5),
enhanced(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the link protection type of the
TE link. Descriptions of the different protection types can
be found in the 'Routing Extensions in Support of
Generalized Multi-Protocol Label Switching (GMPLS)'
document."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203 and
Routing Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4202"
::= { teLinkEntry 6 }
teLinkWorkingPriority OBJECT-TYPE
SYNTAX TeLinkPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents a priority value such that a new
connection with a higher priority, i.e., numerically lower
than this value, is guaranteed to be setup on a primary
link and not on a secondary link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkEntry 7 }
teLinkResourceClass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the TE link resource class.
The resource class is a 32 bit bitfield. The resource class
for a link bundle is derived from the resource class of its
TE links. All TE links within a link bundle must have the
same resource class. Encoding of the resource class is
described in the 'Traffic Engineering (TE) Extensions to
OSPF Version 2' document."
REFERENCE
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201
and Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630"
::= { teLinkEntry 8 }
teLinkIncomingIfId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For unnumbered links, the incoming interface is set to the
outgoing interface identifier chosen by the neighboring LSR
for the reverse link corresponding to this TE link. If the
link is numbered, the value of this object is 0 and the
address is stored in the teLinkRemoteIpAddr instead."
REFERENCE
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
::= { teLinkEntry 9 }
teLinkOutgoingIfId OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the link is unnumbered, the outgoing interface identifier
is set to the outgoing interface identifier chosen for the
TE link by the advertising LSR. If the link is numbered, the
value of this object is 0 and the address is stored in the
teLinkLocalIpAddr instead."
REFERENCE
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
::= { teLinkEntry 10 }
teLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. None of the writable objects in
a row can be changed if status is active(1)."
::= { teLinkEntry 11 }
teLinkStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
teLinkTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { teLinkEntry 12 }
-- End of teLinkTable
-- TE Link Descriptor Table
teLinkDescriptorTable OBJECT-TYPE
SYNTAX SEQUENCE OF TeLinkDescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the interface switching capability
descriptors associated with the TE links."
::= { teLinkObjects 2 }
teLinkDescriptorEntry OBJECT-TYPE
SYNTAX TeLinkDescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for every TE link interface
switching capability descriptor. An ifEntry in the ifTable
must exist before a teLinkDescriptorEntry using the same
ifIndex is created. ifType of ifEntry must be teLink(200).
If a TE link entry in the ifTable is destroyed, then so are
all of the entries in the teLinkDescriptorTable that use the
ifIndex of this TE link."
INDEX { ifIndex, teLinkDescriptorId }
::= { teLinkDescriptorTable 1 }
TeLinkDescriptorEntry ::= SEQUENCE {
teLinkDescriptorId Unsigned32,
teLinkDescrSwitchingCapability TeLinkSwitchingCapability,
teLinkDescrEncodingType TeLinkEncodingType,
teLinkDescrMinLspBandwidth TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio0 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio1 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio2 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio3 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio4 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio5 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio6 TeLinkBandwidth,
teLinkDescrMaxLspBandwidthPrio7 TeLinkBandwidth,
teLinkDescrInterfaceMtu Unsigned32,
teLinkDescrIndication TeLinkSonetSdhIndication,
teLinkDescrRowStatus RowStatus,
teLinkDescrStorageType StorageType
}
teLinkDescriptorId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the link descriptor identifier."
::= { teLinkDescriptorEntry 1 }
teLinkDescrSwitchingCapability OBJECT-TYPE
SYNTAX TeLinkSwitchingCapability
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies interface switching capability of
the TE link, which is derived from its component links."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 2 }
teLinkDescrEncodingType OBJECT-TYPE
SYNTAX TeLinkEncodingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the TE link encoding type."
REFERENCE
"Generalized Multi-Protocol Label Switching (GMPLS)
Signaling Functional Description, RFC 3471"
::= { teLinkDescriptorEntry 3 }
teLinkDescrMinLspBandwidth OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the minimum LSP bandwidth on
the TE link. This is derived from the union of the
minimum LSP bandwidth of all the component links
associated with the TE link that can be used to carry
live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 4 }
teLinkDescrMaxLspBandwidthPrio0 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 0 on the TE link. This is the union of the maximum
LSP bandwidth at priority 0 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 5 }
teLinkDescrMaxLspBandwidthPrio1 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 1 on the TE link. This is the union of the maximum
LSP bandwidth at priority 1 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 6 }
teLinkDescrMaxLspBandwidthPrio2 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 2 on the TE link. This is the union of the maximum
LSP bandwidth at priority 2 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 7 }
teLinkDescrMaxLspBandwidthPrio3 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 3 on the TE link. This is the union of the maximum
LSP bandwidth at priority 3 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 8 }
teLinkDescrMaxLspBandwidthPrio4 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 4 on the TE link. This is the union of the maximum
LSP bandwidth at priority 4 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 9 }
teLinkDescrMaxLspBandwidthPrio5 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 5 on the TE link. This is the union of the maximum
LSP bandwidth at priority 5 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 10 }
teLinkDescrMaxLspBandwidthPrio6 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 6 on the TE link. This is the union of the maximum
LSP bandwidth at priority 6 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 11 }
teLinkDescrMaxLspBandwidthPrio7 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 7 on the TE link. This is the union of the maximum
LSP bandwidth at priority 7 of all the component links within
the TE link that can be used to carry live traffic."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 12 }
teLinkDescrInterfaceMtu OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the interface MTU for the TE
link descriptor."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 13 }
teLinkDescrIndication OBJECT-TYPE
SYNTAX TeLinkSonetSdhIndication
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies whether this interface supports
Standard or Arbitrary SONET/SDH."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkDescriptorEntry 14 }
teLinkDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. No read-create object
can be changed if teLinkDescrRowStatus is in the active(1)
state."
::= { teLinkDescriptorEntry 15 }
teLinkDescrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
teLinkDescriptorTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { teLinkDescriptorEntry 16 }
-- End of teLinkDescriptorTable
-- TE Link Shared Risk Link Group Table
teLinkSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TeLinkSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the SRLGs associated with TE links."
::= { teLinkObjects 3 }
teLinkSrlgEntry OBJECT-TYPE
SYNTAX TeLinkSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains information about an
SRLG associated with a TE link.
An ifEntry in the ifTable must exist before a
teLinkSrlgEntry using the same ifIndex is created.
The ifType of ifEntry must be teLink(200).
If a TE link entry in the ifTable is destroyed, then so
are all of the entries in the teLinkSrlgTable that use the
ifIndex of this TE link."
INDEX { ifIndex, teLinkSrlg }
::= { teLinkSrlgTable 1 }
TeLinkSrlgEntry ::= SEQUENCE {
teLinkSrlg Unsigned32,
teLinkSrlgRowStatus RowStatus,
teLinkSrlgStorageType StorageType
}
teLinkSrlg OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This identifies an SRLG supported by the TE link. An SRLG is
identified with a 32-bit number that is unique within an IGP
domain. Zero is a valid SRLG number."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { teLinkSrlgEntry 1 }
teLinkSrlgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. No read-create object can
be modified if teLinkSrlgRowStatus is active(1)."
::= { teLinkSrlgEntry 2 }
teLinkSrlgStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
teLinkSrlgTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { teLinkSrlgEntry 3 }
-- End of teLinkSrlgTable
-- TE Link Bandwidth Table
teLinkBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF TeLinkBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the priority-based bandwidth table
for TE links."
::= { teLinkObjects 4 }
teLinkBandwidthEntry OBJECT-TYPE
SYNTAX TeLinkBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains information about
the priority-based bandwidth of TE links. An ifEntry in the
ifTable must exist before a teLinkBandwidthEntry using the
same ifIndex is created. The ifType of ifEntry must be
teLink(200). If a TE link entry in the ifTable is destroyed,
then so are all of the entries in the teLinkBandwidthTable
that use the ifIndex of this TE link."
INDEX { ifIndex, teLinkBandwidthPriority }
::= { teLinkBandwidthTable 1 }
TeLinkBandwidthEntry ::= SEQUENCE {
teLinkBandwidthPriority TeLinkPriority,
teLinkBandwidthUnreserved TeLinkBandwidth,
teLinkBandwidthRowStatus RowStatus,
teLinkBandwidthStorageType StorageType
}
teLinkBandwidthPriority OBJECT-TYPE
SYNTAX TeLinkPriority
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute specifies the priority. A value of 0 is valid
as specified in the 'Traffic Engineering (TE) Extensions to
OSPF Version 2' document."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203 and
Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630"
::= { teLinkBandwidthEntry 1 }
teLinkBandwidthUnreserved OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the TE link unreserved
bandwidth at priority p. It is the sum of the unreserved
bandwidths at priority p of all component links associated
with the TE link (excluding all links that are strictly
used as protecting links)."
REFERENCE
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
::= { teLinkBandwidthEntry 2 }
teLinkBandwidthRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. No read-create object
can be modified when teLinkBandwidthRowStatus is active(1)."
::= { teLinkBandwidthEntry 3 }
teLinkBandwidthStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
teLinkBandwidthTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { teLinkBandwidthEntry 4 }
-- End of teLinkBandwidthTable
-- Component Link Table
componentLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the component link parameters."
::= { teLinkObjects 5 }
componentLinkEntry OBJECT-TYPE
SYNTAX ComponentLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table exists for each ifEntry that
represents a component link. An ifEntry must exist in
the ifTable before a componentLinkEntry is created with
the corresponding ifIndex. ifEntry's ifType can be
of any interface type that has been defined for TE Link
interworking. Examples include ATM, Frame Relay, Ethernet,
etc. If an entry representing a component link is destroyed
in the ifTable, then so is the corresponding entry in the
componentLinkTable. The administrative and operational
status values are controlled from the ifEntry."
INDEX { ifIndex }
::= { componentLinkTable 1 }
ComponentLinkEntry ::= SEQUENCE {
componentLinkMaxResBandwidth TeLinkBandwidth,
componentLinkPreferredProtection TeLinkProtection,
componentLinkCurrentProtection TeLinkProtection,
componentLinkRowStatus RowStatus,
componentLinkStorageType StorageType
}
componentLinkMaxResBandwidth OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum reservable bandwidth on
the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkEntry 1 }
componentLinkPreferredProtection OBJECT-TYPE
SYNTAX TeLinkProtection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies whether this component link is
a primary or secondary entity."
::= { componentLinkEntry 2 }
componentLinkCurrentProtection OBJECT-TYPE
SYNTAX TeLinkProtection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies whether this component link is
currently used as primary or secondary link."
::= { componentLinkEntry 3 }
componentLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. No read-create object
can be modified when componentLinkRowStatus is active(1)."
::= { componentLinkEntry 4 }
componentLinkStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
componentLinkTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { componentLinkEntry 5 }
-- End of componentLinkTable
-- Component Link Descriptor Table
componentLinkDescriptorTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentLinkDescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the interface switching capability
descriptors associated with the component links."
::= { teLinkObjects 6 }
componentLinkDescriptorEntry OBJECT-TYPE
SYNTAX ComponentLinkDescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for every component link
descriptor. An ifEntry in the ifTable must exist before a
componentLinkDescriptorEntry using the same ifIndex is
created. ifEntry's ifType can be of any interface type that
has been defined for TE Link interworking. Examples include
ATM, Frame Relay, Ethernet, etc. If a component link entry
in the ifTable is destroyed, then so are all entries in the
componentLinkDescriptorTable that use the ifIndex of this
component link."
INDEX { ifIndex, componentLinkDescrId }
::= { componentLinkDescriptorTable 1 }
ComponentLinkDescriptorEntry ::= SEQUENCE {
componentLinkDescrId Unsigned32,
componentLinkDescrSwitchingCapability TeLinkSwitchingCapability,
componentLinkDescrEncodingType TeLinkEncodingType,
componentLinkDescrMinLspBandwidth TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio0 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio1 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio2 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio3 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio4 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio5 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio6 TeLinkBandwidth,
componentLinkDescrMaxLspBandwidthPrio7 TeLinkBandwidth,
componentLinkDescrInterfaceMtu Unsigned32,
componentLinkDescrIndication TeLinkSonetSdhIndication,
componentLinkDescrRowStatus RowStatus,
componentLinkDescrStorageType StorageType
}
componentLinkDescrId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the link descriptor identifier."
::= { componentLinkDescriptorEntry 1 }
componentLinkDescrSwitchingCapability OBJECT-TYPE
SYNTAX TeLinkSwitchingCapability
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies link multiplexing capabilities of
the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 2 }
componentLinkDescrEncodingType OBJECT-TYPE
SYNTAX TeLinkEncodingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the component link encoding type."
REFERENCE
"Generalized Multi-Protocol Label Switching (GMPLS) Signaling
Functional Description, RFC 3471"
::= { componentLinkDescriptorEntry 3 }
componentLinkDescrMinLspBandwidth OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the minimum LSP bandwidth on
the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 4 }
componentLinkDescrMaxLspBandwidthPrio0 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 0 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 5 }
componentLinkDescrMaxLspBandwidthPrio1 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 1 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 6 }
componentLinkDescrMaxLspBandwidthPrio2 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 2 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 7 }
componentLinkDescrMaxLspBandwidthPrio3 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 3 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 8 }
componentLinkDescrMaxLspBandwidthPrio4 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 4 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 9 }
componentLinkDescrMaxLspBandwidthPrio5 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "thousand bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 5 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 10 }
componentLinkDescrMaxLspBandwidthPrio6 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 6 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 11 }
componentLinkDescrMaxLspBandwidthPrio7 OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the maximum LSP bandwidth at
priority 7 on the component link."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 12 }
componentLinkDescrInterfaceMtu OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the interface MTU for the component
link descriptor."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 13 }
componentLinkDescrIndication OBJECT-TYPE
SYNTAX TeLinkSonetSdhIndication
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies whether this interface supports
Standard or Arbitrary SONET/SDH."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkDescriptorEntry 14 }
componentLinkDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. No read-create object
can be modified when componentLinkDescrRowStatus
is active(1)."
::= { componentLinkDescriptorEntry 15 }
componentLinkDescrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
componentLinkDescriptorTable. Conceptual rows
having the value 'permanent' need not allow write-access
to any columnar object in the row."
::= { componentLinkDescriptorEntry 16 }
-- End of componentLinkDescriptorTable
-- Component Link Bandwidth Table
componentLinkBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentLinkBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the priority-based bandwidth
for component links."
::= { teLinkObjects 7 }
componentLinkBandwidthEntry OBJECT-TYPE
SYNTAX ComponentLinkBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains information about
the priority-based bandwidth on component links.
An ifEntry in the ifTable must exist before a
componentLinkBandwidthEntry using the same ifIndex is
created. ifEntry's ifType can be of any interface type that
has been defined for TE Link interworking. Examples
include ATM, Frame Relay, Ethernet, etc. If a component link
entry in the ifTable is destroyed, then so are all entries
in the componentLinkBandwidthTable that use the ifIndex of
this component link."
INDEX { ifIndex, componentLinkBandwidthPriority }
::= { componentLinkBandwidthTable 1 }
ComponentLinkBandwidthEntry ::= SEQUENCE {
componentLinkBandwidthPriority TeLinkPriority,
componentLinkBandwidthUnreserved TeLinkBandwidth,
componentLinkBandwidthRowStatus RowStatus,
componentLinkBandwidthStorageType StorageType
}
componentLinkBandwidthPriority OBJECT-TYPE
SYNTAX TeLinkPriority
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute specifies the priority. A value of 0 is valid
as specified in the 'Traffic Engineering (TE) Extensions to
OSPF Version 2' document."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203 and
Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630"
::= { componentLinkBandwidthEntry 1 }
componentLinkBandwidthUnreserved OBJECT-TYPE
SYNTAX TeLinkBandwidth
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the component link unreserved
bandwidth at priority p."
REFERENCE
"OSPF Extensions in Support of Generalized Multi-Protocol
Label Switching (GMPLS), RFC 4203"
::= { componentLinkBandwidthEntry 2 }
componentLinkBandwidthRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. No read-create object can
be modified when componentLinkBandwidthRowStatus is
active(1)."
::= { componentLinkBandwidthEntry 3 }
componentLinkBandwidthStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
componentLinkBandwidthTable. Conceptual rows
having the value 'permanent' need not allow write-access
to any columnar object in the row."
::= { componentLinkBandwidthEntry 4 }
-- End of componentLinkBandwidthTable
-- Module compliance
teLinkCompliances
OBJECT IDENTIFIER ::= { teLinkConformance 1 }
teLinkGroups
OBJECT IDENTIFIER ::= { teLinkConformance 2 }
teLinkModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support read-create
so that both configuration and monitoring of TE links can
be accomplished via this MIB module."
MODULE -- this module
MANDATORY-GROUPS { teLinkGroup,
teLinkBandwidthGroup,
componentLinkBandwidthGroup }
GROUP teLinkSrlgGroup
DESCRIPTION
"This group is mandatory for GMPLS enabled devices."
GROUP teLinkPscGroup
DESCRIPTION
"This group is mandatory for devices that support the
packet switching capability."
GROUP teLinkTdmGroup
DESCRIPTION
"This group is mandatory for devices that support the TDM
switching capability."
-- teLinkTable
OBJECT teLinkAddressType
SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION
"Only ipv4(1) and ipv6(2) address types need to be
supported for numbered links. For unnumbered links, the
unknown(0) address type needs to be supported."
OBJECT teLinkLocalIpAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION
"Size of TE link IP address depends on type of TE link.
TE link IP address size is zero if the link is unnumbered,
four if the link IP address is IPv4, and sixteen if the
link IP address is IPv6."
OBJECT teLinkRemoteIpAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION
"Size of TE link IP address depends on type of TE link.
TE link IP address size is zero if the link is unnumbered,
four if the link IP address is IPv4, and sixteen if the
link IP address is IPv6."
OBJECT teLinkRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
-- teLinkDescriptorTable
OBJECT teLinkDescrRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
-- teLinkSrlgTable
OBJECT teLinkSrlgRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
-- teLinkBandwidthTable
OBJECT teLinkBandwidthRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
-- componentLinkTable
OBJECT componentLinkRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
-- componentLinkDescriptorTable
OBJECT componentLinkDescrRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
-- componentLinkBandwidthTable
OBJECT componentLinkBandwidthRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
::= { teLinkCompliances 1 }
teLinkModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support the
monitoring of the TE link MIB module."
MODULE -- this module
MANDATORY-GROUPS { teLinkGroup,
teLinkBandwidthGroup,
componentLinkBandwidthGroup }
GROUP teLinkSrlgGroup
DESCRIPTION
"This group is mandatory for GMPLS enabled devices."
GROUP teLinkPscGroup
DESCRIPTION
"This group is mandatory for devices that support the
packet switching capability."
GROUP teLinkTdmGroup
DESCRIPTION
"This group is mandatory for devices that support the TDM
switching capability."
-- teLinkTable
OBJECT teLinkAddressType
SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) }
MIN-ACCESS read-only
DESCRIPTION
"Only ipv4(1) and ipv6(2) address types need to be
supported for numbered links. For unnumbered links, the
unknown(0) address type needs to be supported."
OBJECT teLinkLocalIpAddr
SYNTAX InetAddress (SIZE(0|4|16))
MIN-ACCESS read-only
DESCRIPTION
"Size of TE link IP address depends on type of TE link.
TE link IP address size is zero if the link is unnumbered,
four if the link IP address is IPv4, and sixteen if the
link IP address is IPv6."
OBJECT teLinkRemoteIpAddr
SYNTAX InetAddress (SIZE(0|4|16))
MIN-ACCESS read-only
DESCRIPTION
"Size of TE link IP address depends on type of TE link.
TE link IP address size is zero if the link is unnumbered,
four if the link IP address is IPv4, and sixteen if the
link IP address is IPv6."
OBJECT teLinkProtectionType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkWorkingPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT teLinkStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- teLinkDescriptorTable
OBJECT teLinkDescrSwitchingCapability
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrEncodingType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMinLspBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio1
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio2
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio3
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio4
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio5
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio6
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrMaxLspBandwidthPrio7
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT teLinkDescrRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT teLinkDescrStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- teLinkSrlgTable
OBJECT teLinkSrlgRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT teLinkSrlgStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- teLinkBandwidthTable
OBJECT teLinkBandwidthRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT teLinkBandwidthStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- componentLinkTable
OBJECT componentLinkMaxResBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkPreferredProtection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT componentLinkStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- componentLinkDescriptorTable
OBJECT componentLinkDescrSwitchingCapability
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrEncodingType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMinLspBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio1
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio2
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio3
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio4
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio5
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio6
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrMaxLspBandwidthPrio7
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrInterfaceMtu
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrIndication
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT componentLinkDescrRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT componentLinkDescrStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- componentLinkBandwidthTable
OBJECT componentLinkBandwidthRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required and active(1) is the
only status that needs to be supported."
OBJECT componentLinkBandwidthStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { teLinkCompliances 2 }
-- Units of conformance
teLinkGroup OBJECT-GROUP
OBJECTS { teLinkAddressType,
teLinkLocalIpAddr,
teLinkRemoteIpAddr,
teLinkMetric,
teLinkProtectionType,
teLinkWorkingPriority,
teLinkResourceClass,
teLinkIncomingIfId,
teLinkOutgoingIfId,
teLinkRowStatus,
teLinkStorageType,
teLinkDescrSwitchingCapability,
teLinkDescrEncodingType,
teLinkDescrRowStatus,
teLinkDescrStorageType,
componentLinkPreferredProtection,
componentLinkCurrentProtection,
componentLinkRowStatus,
componentLinkStorageType,
componentLinkDescrSwitchingCapability,
componentLinkDescrEncodingType,
componentLinkDescrRowStatus,
componentLinkDescrStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for the management of
resources associated with TE links."
::= { teLinkGroups 1 }
teLinkSrlgGroup OBJECT-GROUP
OBJECTS { teLinkSrlgRowStatus,
teLinkSrlgStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for the management of
SRLG resources associated with TE links."
::= { teLinkGroups 2 }
teLinkBandwidthGroup OBJECT-GROUP
OBJECTS { teLinkMaximumReservableBandwidth,
teLinkDescrMaxLspBandwidthPrio0,
teLinkDescrMaxLspBandwidthPrio1,
teLinkDescrMaxLspBandwidthPrio2,
teLinkDescrMaxLspBandwidthPrio3,
teLinkDescrMaxLspBandwidthPrio4,
teLinkDescrMaxLspBandwidthPrio5,
teLinkDescrMaxLspBandwidthPrio6,
teLinkDescrMaxLspBandwidthPrio7,
teLinkBandwidthUnreserved,
teLinkBandwidthRowStatus,
teLinkBandwidthStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for the management of
the bandwidth resources associated with TE links and
component links."
::= { teLinkGroups 3 }
componentLinkBandwidthGroup OBJECT-GROUP
OBJECTS { componentLinkMaxResBandwidth,
componentLinkDescrMaxLspBandwidthPrio0,
componentLinkDescrMaxLspBandwidthPrio1,
componentLinkDescrMaxLspBandwidthPrio2,
componentLinkDescrMaxLspBandwidthPrio3,
componentLinkDescrMaxLspBandwidthPrio4,
componentLinkDescrMaxLspBandwidthPrio5,
componentLinkDescrMaxLspBandwidthPrio6,
componentLinkDescrMaxLspBandwidthPrio7,
componentLinkBandwidthUnreserved,
componentLinkBandwidthRowStatus,
componentLinkBandwidthStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for the management of the
bandwidth parameters associated with component links."
::= { teLinkGroups 4 }
teLinkPscGroup OBJECT-GROUP
OBJECTS { teLinkDescrMinLspBandwidth,
teLinkDescrInterfaceMtu,
componentLinkDescrMinLspBandwidth,
componentLinkDescrInterfaceMtu
}
STATUS current
DESCRIPTION
"Collection of objects needed for devices that are
packet switch capable."
::= { teLinkGroups 5 }
teLinkTdmGroup OBJECT-GROUP
OBJECTS { teLinkDescrMinLspBandwidth,
teLinkDescrIndication,
componentLinkDescrMinLspBandwidth,
componentLinkDescrIndication
}
STATUS current
DESCRIPTION
"Collection of objects needed for devices that are
TDM switching capable."
::= { teLinkGroups 6 }
-- End of TE-LINK-STD-MIB
END