Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/mibs/ietf/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/mibs/ietf/ |
TN3270E-RT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Unsigned32, Gauge32
FROM SNMPv2-SMI
RowStatus, DateAndTime, TimeStamp, TestAndIncr
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
tn3270eSrvrConfIndex, tn3270eClientGroupName,
tn3270eResMapElementType
FROM TN3270E-MIB
IANATn3270eAddrType, IANATn3270eAddress
FROM IANATn3270eTC-MIB
snanauMIB
FROM SNA-NAU-MIB;
tn3270eRtMIB MODULE-IDENTITY
LAST-UPDATED "9807270000Z" -- July 27, 1998
ORGANIZATION "TN3270E Working Group"
CONTACT-INFO
"Kenneth White (kennethw@vnet.ibm.com)
IBM Corp. - Dept. BRQA/Bldg. 501/G114
P.O. Box 12195
3039 Cornwallis
RTP, NC 27709-2195
Robert Moore (remoore@us.ibm.com)
IBM Corp. - Dept. BRQA/Bldg. 501/G114
P.O. Box 12195
3039 Cornwallis
RTP, NC 27709-2195
(919) 254-4436"
DESCRIPTION
"This module defines a portion of the management
information base (MIB) that enables monitoring of
TN3270 and TN3270E clients' response times by a
TN3270E server."
REVISION "9807270000Z" -- July 27, 1998
DESCRIPTION
"RFC nnnn (Proposed Standard)" -- RFC Editor to fill in
::= { snanauMIB 9 }
-- snanauMIB ::= { mib-2 34 }
-- Top level structure of the MIB
tn3270eRtNotifications OBJECT IDENTIFIER ::= { tn3270eRtMIB 0 }
tn3270eRtObjects OBJECT IDENTIFIER ::= { tn3270eRtMIB 1 }
tn3270eRtConformance OBJECT IDENTIFIER ::= { tn3270eRtMIB 3 }
-- MIB Objects
-- Response Time Control Table
tn3270eRtCollCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eRtCollCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The response time monitoring collection control table,
which allows a management application to control the
types of response time data being collected, and the
clients for which it is being collected.
This table is indexed by tn3270eSrvrConfIndex and
tn3270eClientGroupName imported from the
TN3270E-MIB. tn3270eSrvrConfIndex indicates within
a host which TN3270E server an entry applies to.
tn3270eClientGroupName it identifies the set of IP
clients for which response time data is being collected.
The particular IP clients making up the set are identified
in the tn3270eClientGroupTable in the TN3270E-MIB."
::= { tn3270eRtObjects 1}
tn3270eRtCollCtlEntry OBJECT-TYPE
SYNTAX Tn3270eRtCollCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the TN3270E response time monitoring collection
control table. To handle the case of multiple TN3270E
servers on the same host, the first index of this table is
the tn3270eSrvrConfIndex from the TN3270E-MIB."
INDEX {
tn3270eSrvrConfIndex, -- Server's index
tn3270eClientGroupName } -- What to collect on
::= { tn3270eRtCollCtlTable 1 }
Tn3270eRtCollCtlEntry ::= SEQUENCE {
tn3270eRtCollCtlType BITS,
tn3270eRtCollCtlSPeriod Unsigned32,
tn3270eRtCollCtlSPMult Unsigned32,
tn3270eRtCollCtlThreshHigh Unsigned32,
tn3270eRtCollCtlThreshLow Unsigned32,
tn3270eRtCollCtlIdleCount Unsigned32,
tn3270eRtCollCtlBucketBndry1 Unsigned32,
tn3270eRtCollCtlBucketBndry2 Unsigned32,
tn3270eRtCollCtlBucketBndry3 Unsigned32,
tn3270eRtCollCtlBucketBndry4 Unsigned32,
tn3270eRtCollCtlRowStatus RowStatus }
-- The OID { tn3270eRtCollCtlEntry 1 } is not used
tn3270eRtCollCtlType OBJECT-TYPE
SYNTAX BITS {
aggregate(0),
excludeIpComponent(1),
ddr(2),
average(3),
buckets(4),
traps(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls what types of response time data to
collect, whether to summarize the data across the members
of a client group or keep it individually, whether to
introduce dynamic definite responses, and whether to
generate traps.
aggregate(0) - Aggregate response time data for the
client group as a whole. If this bit
is set to 0, then maintain response
time data separately for each member
of the client group.
excludeIpComponent(1) - Do not include the IP-network
component in any response times.
ddr(2) - Enable dynamic definite response.
average(3) - Produce an average response time
based on a specified collection
interval.
buckets(4) - Maintain tn3270eRtDataBucket values in
a corresponding tn3270eRtDataEntry,
based on the bucket boundaries specified
in the tn3270eRtCollCtlBucketBndry
objects .
traps(5) - generate the notifications specified
in this MIB module. The
tn3270eRtExceeded and tn3270eRtOkay
notifications are generated only if
average(3) is also specified."
::= { tn3270eRtCollCtlEntry 2 }
tn3270eRtCollCtlSPeriod OBJECT-TYPE
SYNTAX Unsigned32 (15..86400) -- 15 second min, 24 hour max
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that defines the sample period.
The actual interval is defined as tn3270eRtCollCtlSPeriod
times tn3270eRtCollCtlSPMult.
The value of this object is used only if the corresponding
tn3270eRtCollCtlType has the average(3) setting."
DEFVAL {20} -- 20 seconds
::= { tn3270eRtCollCtlEntry 3 }
tn3270eRtCollCtlSPMult OBJECT-TYPE
SYNTAX Unsigned32 (1..5760) -- 5760 x SPeriod of 15 is 24 hours
UNITS "period"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sample period multiplier; this value is multiplied by
the sample period, tn3270eRtCollCtlSPeriod, to determine
the collection interval.
Sliding-window average calculation can, if necessary, be
disabled, by setting the sample period multiplier,
tn3270eRtCollCtlSPMult, to 1, and setting the sample
period, tn3270eRtCollCtlSPeriod, to the required
collection interval.
The value of this object is used only if the corresponding
tn3270eRtCollCtlType has the average(3) setting."
DEFVAL { 30 } -- yields an interval of 10 minutes when
-- used with the default SPeriod value
::= { tn3270eRtCollCtlEntry 4 }
tn3270eRtCollCtlThreshHigh OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for generating a tn3270eRtExceeded
notification, signalling that a monitored total response
time has exceeded the specified limit. A value of zero
for this object suppresses generation of this notification.
The value of this object is used only if the corresponding
tn3270eRtCollCtlType has average(3) and traps(5) selected.
A tn3270eRtExceeded notification is not generated again for a
tn3270eRtDataEntry until an average response time falling below
the low threshold tn3270eRtCollCtlThreshLow specified for the
client group has occurred for the entry."
DEFVAL { 0 } -- suppress notifications
::= { tn3270eRtCollCtlEntry 5 }
tn3270eRtCollCtlThreshLow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for generating a tn3270eRtOkay notification,
signalling that a monitored total response time has fallen
below the specified limit. A value of zero for this object
suppresses generation of this notification. The value of
this object is used only if the corresponding
tn3270eRtCollCtlType has average(3) and traps(5) selected.
A tn3270eRtOkay notification is not generated again for a
tn3270eRtDataEntry until an average response time
exceeding the high threshold tn3270eRtCollCtlThreshHigh
specified for the client group has occurred for the entry."
DEFVAL { 0 } -- suppress notifications
::= { tn3270eRtCollCtlEntry 6 }
tn3270eRtCollCtlIdleCount OBJECT-TYPE
SYNTAX Unsigned32
UNITS "transactions"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is used to determine whether a
sample that yields an average response time exceeding the
value of tn3270eRtCollCtlThreshHigh was a statistically
valid one. If the following statement is true, then the
sample was statistically valid, and so a tn3270eRtExceeded
notification should be generated:
AvgCountTrans * ((AvgRt/ThreshHigh - 1) ** 2) >= IdleCount
This comparison is done only if the corresponding
tn3270eRtCollCtlType has average(3) and traps(5) selected."
DEFVAL { 1 }
::= { tn3270eRtCollCtlEntry 7 }
tn3270eRtCollCtlBucketBndry1 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object defines the range of transaction
response times counted in the Tn3270eRtDataBucket1Rts
object: those less than or equal to this value."
DEFVAL { 10 }
::= { tn3270eRtCollCtlEntry 8 }
tn3270eRtCollCtlBucketBndry2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object, together with that of the
tn3270eRtCollCtlBucketBndry1 object, defines the range
of transaction response times counted in the
Tn3270eRtDataBucket2Rts object: those greater than the
value of the tn3270eRtCollCtlBucketBndry1 object, and
less than or equal to the value of this object."
DEFVAL { 20 }
::= { tn3270eRtCollCtlEntry 9 }
tn3270eRtCollCtlBucketBndry3 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object, together with that of the
tn3270eRtCollCtlBucketBndry2 object, defines the range of
transaction response times counted in the
Tn3270eRtDataBucket3Rts object: those greater than the
value of the tn3270eRtCollCtlBucketBndry2 object, and less
than or equal to the value of this object."
DEFVAL { 50 }
::= { tn3270eRtCollCtlEntry 10 }
tn3270eRtCollCtlBucketBndry4 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object, together with that of the
tn3270eRtCollCtlBucketBndry3 object, defines the range
of transaction response times counted in the
Tn3270eRtDataBucket4Rts object: those greater than the
value of the tn3270eRtCollCtlBucketBndry3 object, and
less than or equal to the value of this object.
The value of this object also defines the range of
transaction response times counted in the
Tn3270eRtDataBucket5Rts object: those greater than the
value of this object."
DEFVAL { 100 }
::= { tn3270eRtCollCtlEntry 11 }
tn3270eRtCollCtlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the tn3270eRtCollCtlTable. An entry in this table
is deleted by setting this object to destroy(6).
Deleting an entry in this table has the side-effect
of removing all entries from the tn3270eRtDataTable
that are associated with the entry being deleted."
::= { tn3270eRtCollCtlEntry 12 }
-- TN3270E Response Time Data Table
tn3270eRtDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eRtDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The response time data table. Entries in this table are
created based on entries in the tn3270eRtCollCtlTable."
::= { tn3270eRtObjects 2 }
tn3270eRtDataEntry OBJECT-TYPE
SYNTAX Tn3270eRtDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries in this table are created based upon the
tn3270eRtCollCtlTable. When the corresponding
tn3270eRtCollCtlType has aggregate(0) specified, a single
entry is created in this table, with a tn3270eRtDataClientAddrType
of unknown(0), a zero-length octet string value for
tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of
0. When aggregate(0) is not specified, a separate entry is
created for each client in the group.
Note that the following objects defined within an entry in this
table can wrap:
tn3270eRtDataTotalRts
tn3270eRtDataTotalIpRts
tn3270eRtDataCountTrans
tn3270eRtDataCountDrs
tn3270eRtDataElapsRnTrpSq
tn3270eRtDataElapsIpRtSq
tn3270eRtDataBucket1Rts
tn3270eRtDataBucket2Rts
tn3270eRtDataBucket3Rts
tn3270eRtDataBucket4Rts
tn3270eRtDataBucket5Rts"
INDEX {
tn3270eSrvrConfIndex, -- Server's local index
tn3270eClientGroupName, -- Collection target
tn3270eRtDataClientAddrType,
tn3270eRtDataClientAddress,
tn3270eRtDataClientPort }
::= { tn3270eRtDataTable 1 }
Tn3270eRtDataEntry ::= SEQUENCE {
tn3270eRtDataClientAddrType IANATn3270eAddrType,
tn3270eRtDataClientAddress IANATn3270eAddress,
tn3270eRtDataClientPort Unsigned32,
tn3270eRtDataAvgRt Gauge32,
tn3270eRtDataAvgIpRt Gauge32,
tn3270eRtDataAvgCountTrans Gauge32,
tn3270eRtDataIntTimeStamp DateAndTime,
tn3270eRtDataTotalRts Counter32,
tn3270eRtDataTotalIpRts Counter32,
tn3270eRtDataCountTrans Counter32,
tn3270eRtDataCountDrs Counter32,
tn3270eRtDataElapsRndTrpSq Unsigned32,
tn3270eRtDataElapsIpRtSq Unsigned32,
tn3270eRtDataBucket1Rts Counter32,
tn3270eRtDataBucket2Rts Counter32,
tn3270eRtDataBucket3Rts Counter32,
tn3270eRtDataBucket4Rts Counter32,
tn3270eRtDataBucket5Rts Counter32,
tn3270eRtDataRtMethod INTEGER,
tn3270eRtDataDiscontinuityTime TimeStamp
}
tn3270eRtDataClientAddrType OBJECT-TYPE
SYNTAX IANATn3270eAddrType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of address represented by the value
of tn3270eRtDataClientAddress. The value unknown(0) is
used if aggregate data is being collected for the client
group."
::= { tn3270eRtDataEntry 1 }
tn3270eRtDataClientAddress OBJECT-TYPE
SYNTAX IANATn3270eAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the IP address of the TN3270 client being
monitored. A zero-length octet string is used if
aggregate data is being collected for the client group."
::= { tn3270eRtDataEntry 2 }
tn3270eRtDataClientPort OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the client port number of the TN3270 client being
monitored. The value 0 is used if aggregate data is being
collected for the client group, or if the
tn3270eRtDataClientAddrType identifies an address type that
does not support ports."
::= { tn3270eRtDataEntry 3 }
tn3270eRtDataAvgRt OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenths of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average total response time measured over the last
collection interval."
DEFVAL { 0 }
::= { tn3270eRtDataEntry 4 }
tn3270eRtDataAvgIpRt OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenths of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average IP response time measured over the last
collection interval."
DEFVAL { 0 }
::= { tn3270eRtDataEntry 5 }
tn3270eRtDataAvgCountTrans OBJECT-TYPE
SYNTAX Gauge32
UNITS "transactions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sliding transaction count used for calculating the
values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt
objects. The actual transaction count is available in
the tn3270eRtDataCountTrans object.
The initial value of this object, before any averages have
been calculated, is 0."
::= { tn3270eRtDataEntry 6 }
tn3270eRtDataIntTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time of the last interval that
tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and
tn3270eRtDataAvgCountTrans were calculated.
Prior to the calculation of the first interval
averages, this object returns the value
0x0000000000000000000000. When this value is
returned, the remaining objects in the entry have
no significance."
::= { tn3270eRtDataEntry 7 }
tn3270eRtDataTotalRts OBJECT-TYPE
SYNTAX Counter32
UNITS "tenths of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the total response times collected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 8 }
tn3270eRtDataTotalIpRts OBJECT-TYPE
SYNTAX Counter32
UNITS "tenths of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the total IP-network response times
collected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 9 }
tn3270eRtDataCountTrans OBJECT-TYPE
SYNTAX Counter32
UNITS "transactions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the total number of transactions detected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 10 }
tn3270eRtDataCountDrs OBJECT-TYPE
SYNTAX Counter32
UNITS "definite responses"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the total number of definite responses
detected.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 11 }
tn3270eRtDataElapsRndTrpSq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds squared"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the elapsed round trip time squared. The sum
of the squares is kept in order to enable calculation of
a variance."
DEFVAL { 0 }
::= { tn3270eRtDataEntry 12 }
tn3270eRtDataElapsIpRtSq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds squared"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the elapsed IP round trip time squared.
The sum of the squares is kept in order to enable
calculation of a variance."
DEFVAL { 0 }
::= { tn3270eRtDataEntry 13 }
tn3270eRtDataBucket1Rts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the response times falling into bucket 1.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 14 }
tn3270eRtDataBucket2Rts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the response times falling into bucket 2.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 15 }
tn3270eRtDataBucket3Rts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the response times falling into bucket 3.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 16 }
tn3270eRtDataBucket4Rts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the response times falling into bucket 4.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 17 }
tn3270eRtDataBucket5Rts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the response times falling into bucket 5.
A management application can detect discontinuities in this
counter by monitoring the tn3270eRtDataDiscontinuityTime
object."
::= { tn3270eRtDataEntry 18 }
tn3270eRtDataRtMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
responses(1),
timingMark(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the method that was
used in calculating the IP network time.
The value 'none(0) indicates that response times were not
calculated for the IP network."
::= { tn3270eRtDataEntry 19 }
tn3270eRtDataDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which one or more of this entry's counter objects
suffered a discontinuity. This may happen if a TN3270E
server is stopped and then restarted, and local methods
are used to set up collection policy
(tn3270eRtCollCtlTable entries)."
::= { tn3270eRtDataEntry 20 }
tn3270eRtSpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An advisory lock used to allow cooperating TN3270E-RT-MIB
applications to coordinate their use of the
tn3270eRtCollCtlTable.
When creating a new entry or altering an existing entry
in the tn3270eRtCollCtlTable, an application should make
use of tn3270eRtSpinLock to serialize application changes
or additions.
Since this is an advisory lock, the use of this lock is
not enforced."
::= { tn3270eRtObjects 3 }
-- Notifications
tn3270eRtExceeded NOTIFICATION-TYPE
OBJECTS {
tn3270eRtDataIntTimeStamp,
tn3270eRtDataAvgRt,
tn3270eRtDataAvgIpRt,
tn3270eRtDataAvgCountTrans,
tn3270eRtDataRtMethod
}
STATUS current
DESCRIPTION
"This notification is generated when the average response
time, tn3270eRtDataAvgRt, exceeds
tn3270eRtCollCtlThresholdHigh at the end of a collection
interval specified by tn3270eCollCtlSPeriod
times tn3270eCollCtlSPMult. Note that the corresponding
tn3270eCollCtlType must have traps(5) and average(3) set
for this notification to be generated. In addition,
tn3270eRtDataAvgCountTrans, tn3270eRtCollCtlThreshHigh, and
tn3270eRtDataAvgRt are algorithmically compared to
tn3270eRtCollCtlIdleCount for determination if this
notification will be suppressed."
::= { tn3270eRtNotifications 1 }
tn3270eRtOkay NOTIFICATION-TYPE
OBJECTS {
tn3270eRtDataIntTimeStamp,
tn3270eRtDataAvgRt,
tn3270eRtDataAvgIpRt,
tn3270eRtDataAvgCountTrans,
tn3270eRtDataRtMethod
}
STATUS current
DESCRIPTION
"This notification is generated when the average response
time, tn3270eRtDataAvgRt, falls below
tn3270eRtCollCtlThresholdLow at the end of a collection
interval specified by tn3270eCollCtlSPeriod times
tn3270eCollCtlSPMult, after a tn3270eRtExceeded
notification was generated. Note that the corresponding
tn3270eCollCtlType must have traps(5) and average(3)
set for this notification to be generated."
::= { tn3270eRtNotifications 2 }
tn3270eRtCollStart NOTIFICATION-TYPE
OBJECTS {
tn3270eRtDataRtMethod, -- type of collection
tn3270eResMapElementType -- type of resource
}
STATUS current
DESCRIPTION
"This notification is generated when response time data
collection is enabled for a member of a client group.
In order for this notification to occur the corresponding
tn3270eRtCollCtlType must have traps(5) selected.
tn3270eResMapElementType contains a valid value only if
tn3270eRtDataClientAddress contains a valid address
(rather than a zero-length octet string)."
::= { tn3270eRtNotifications 3 }
tn3270eRtCollEnd NOTIFICATION-TYPE
OBJECTS {
tn3270eRtDataDiscontinuityTime,
tn3270eRtDataAvgRt,
tn3270eRtDataAvgIpRt,
tn3270eRtDataAvgCountTrans,
tn3270eRtDataIntTimeStamp,
tn3270eRtDataTotalRts,
tn3270eRtDataTotalIpRts,
tn3270eRtDataCountTrans,
tn3270eRtDataCountDrs,
tn3270eRtDataElapsRndTrpSq,
tn3270eRtDataElapsIpRtSq,
tn3270eRtDataBucket1Rts,
tn3270eRtDataBucket2Rts,
tn3270eRtDataBucket3Rts,
tn3270eRtDataBucket4Rts,
tn3270eRtDataBucket5Rts,
tn3270eRtDataRtMethod
}
STATUS current
DESCRIPTION
"This notification is generated when an tn3270eRtDataEntry
is deleted after being active (actual data collected), in
order to enable a management application monitoring an
tn3270eRtDataEntry to get the entry's final values. Note
that the corresponding tn3270eCollCtlType must have traps(5)
set for this notification to be generated."
::= { tn3270eRtNotifications 4 }
-- Conformance Statement
tn3270eRtGroups OBJECT IDENTIFIER ::= { tn3270eRtConformance 1 }
tn3270eRtCompliances OBJECT IDENTIFIER ::= { tn3270eRtConformance 2 }
-- Compliance statements
tn3270eRtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that support the
TN327E-RT-MIB."
MODULE -- this module
MANDATORY-GROUPS { tn3270eRtGroup, tn3270eRtNotGroup }
OBJECT tn3270eRtCollCtlType
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation to
this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlSPeriod
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to allow the user to change
the default value of this object, and is allowed to
use a different default."
OBJECT tn3270eRtCollCtlSPMult
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlThreshHigh
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlThreshLow
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlIdleCount
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlBucketBndry1
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlBucketBndry2
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlBucketBndry3
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlBucketBndry4
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET operation
to this object in the absence of adequate security."
OBJECT tn3270eRtCollCtlRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the six
enumerated values for the RowStatus textual convention
need be supported, specifically: active(1)."
::= {tn3270eRtCompliances 1 }
-- Group definitions
tn3270eRtGroup OBJECT-GROUP
OBJECTS {
tn3270eRtCollCtlType,
tn3270eRtCollCtlSPeriod,
tn3270eRtCollCtlSPMult,
tn3270eRtCollCtlThreshHigh,
tn3270eRtCollCtlThreshLow,
tn3270eRtCollCtlIdleCount,
tn3270eRtCollCtlBucketBndry1,
tn3270eRtCollCtlBucketBndry2,
tn3270eRtCollCtlBucketBndry3,
tn3270eRtCollCtlBucketBndry4,
tn3270eRtCollCtlRowStatus,
tn3270eRtDataDiscontinuityTime,
tn3270eRtDataAvgRt,
tn3270eRtDataAvgIpRt,
tn3270eRtDataAvgCountTrans,
tn3270eRtDataIntTimeStamp,
tn3270eRtDataTotalRts,
tn3270eRtDataTotalIpRts,
tn3270eRtDataCountTrans,
tn3270eRtDataCountDrs,
tn3270eRtDataElapsRndTrpSq,
tn3270eRtDataElapsIpRtSq,
tn3270eRtDataBucket1Rts,
tn3270eRtDataBucket2Rts,
tn3270eRtDataBucket3Rts,
tn3270eRtDataBucket4Rts,
tn3270eRtDataBucket5Rts,
tn3270eRtDataRtMethod,
tn3270eRtSpinLock }
STATUS current
DESCRIPTION
"This group is mandatory for all implementations that
support the TN3270E-RT-MIB. "
::= { tn3270eRtGroups 1 }
tn3270eRtNotGroup NOTIFICATION-GROUP
NOTIFICATIONS {
tn3270eRtExceeded,
tn3270eRtOkay,
tn3270eRtCollStart,
tn3270eRtCollEnd
}
STATUS current
DESCRIPTION
"The notifications that must be supported when the
TN3270E-RT-MIB is implemented. "
::= { tn3270eRtGroups 2 }
END