Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/pibs/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/pibs/ |
ACCESSBIND-PIB PIB-DEFINITIONS ::= BEGIN
IMPORTS
ibrpib FROM TUBS-SMI
Unsigned32, Integer32, MODULE-IDENTITY,
MODULE-COMPLIANCE, OBJECT-TYPE, OBJECT-GROUP, pib
FROM COPS-PR-SPPI
InstanceId, Prid, ReferenceId, TagId, TagReferenceId
FROM COPS-PR-SPPI-TC
frwkReferenceEntry
FROM FRAMEWORK-PIB
RoleCombination, PrcIdentifierOid
FROM FRAMEWORK-TC-PIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
TruthValue, PhysAddress
FROM SNMPv2-TC;
accessBindPib MODULE-IDENTITY
SUBJECT-CATEGORIES { all }
LAST-UPDATED "200202202002Z"
ORGANIZATION "IETF RAP WG"
CONTACT-INFO "
Walter Weiss
Ellacoya Networks
7 Henry Clay Drive
Merrimack, NH 03054
Phone: 603-879-7364
E-mail: wweiss@ellacoya.com
"
DESCRIPTION
"A PIB module containing the set of classes to
configure generic event handlers, and outsource
events as they occur. One application of this PIB is
to bind authorization and authentication to COPS
Provisioning."
::= { ibrpib 2 } -- xxx to be assigned by IANA
--
-- The branch OIDs in the AccessBind PIB
--
capabilityClasses OBJECT IDENTIFIER ::= { accessBindPib 1 }
eventClasses OBJECT IDENTIFIER ::= { accessBindPib 2 }
eventHdlrClasses OBJECT IDENTIFIER ::= { accessBindPib 3 }
contextClasses OBJECT IDENTIFIER ::= { accessBindPib 4 }
authClasses OBJECT IDENTIFIER ::= { accessBindPib 5 }
filterClasses OBJECT IDENTIFIER ::= { accessBindPib 6 }
--
-- Event Table
--
-- Instances of this table represent events that occurred at
-- the PEP. The events reference the event handler instance
-- and the specific event handler element that the event was
-- caught by.
eventTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"An instance of this class is created by the PEP and sent
to the PDP. As a result of this event, The PDP may send
additional unsolicited decisions to the PEP after
sending the mandatory solicited decision for the event."
::= { eventClasses 1 }
eventEntry OBJECT-TYPE
SYNTAX EventEntry
STATUS current
DESCRIPTION
"An instance of the eventTable PRC."
PIB-INDEX { eventId }
UNIQUENESS { }
::= { eventTable 1 }
EventEntry ::= SEQUENCE {
eventId InstanceId,
eventEventHdlr ReferenceId,
eventCause ReferenceId
}
eventId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify this event."
::= { eventEntry 1 }
eventEventHdlr OBJECT-TYPE
SYNTAX ReferenceId
PIB-REFERENCES { frwkReferenceEntry }
STATUS current
DESCRIPTION
"This attribute allows a PEP to indicate to the PDP that
this event was generated due to the referenced Event
Handler. This attribute references an event handler via
the indirection PRC frwkReference, since the event
handler and event could potentially belong to a different
PIB contexts."
::= { eventEntry 2 }
eventCause OBJECT-TYPE
SYNTAX ReferenceId
PIB-REFERENCES { frwkReferenceEntry }
STATUS current
DESCRIPTION
"This attribute references the specific instance in a
group of event Handler elements belonging to an event
Handler that resulted in this event. This attribute
references a specific event handler element via the
indirection PRC frwkReference, since the event handler
element and event could potentially belong to a different
PIB contexts."
::= { eventEntry 3 }
--
-- EventHandler Table
--
-- Instances of this PRC are provisioned by the PDP on the PEP
-- to catch specific events. The Event Handlers reference a
-- group of eventHdlrElement PRIs that contain the scope of
-- the event and specify the context data to send to the PDP
-- when an event is caught.
eventHandlerTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventHandlerEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"The eventHandlerTable specifies for what events the PEP
should send a request to the PDP. As a result of this
request, the PEP may send configuration changes to the
PEP. An instance of this class defines the circumstances
for generating a request, and provides the means for
specifying the contents of the PEP Request. Hence, the
eventHandlerTable can be said to create eventTable
entries. "
::= { eventHdlrClasses 1 }
eventHandlerEntry OBJECT-TYPE
SYNTAX EventHandlerEntry
STATUS current
DESCRIPTION
"eventTable entry."
PIB-INDEX { eventHandlerId }
UNIQUENESS { eventHandlerElements,
eventHandlerNonMatchNext
}
::= { eventHandlerTable 1}
EventHandlerEntry ::= SEQUENCE {
eventHandlerId InstanceId,
eventHandlerElements TagReferenceId,
eventHandlerNonMatchNext Prid
}
eventHandlerId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies
an instance of the eventHandlerTable class."
::= { eventHandlerEntry 1}
eventHandlerElements OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { eventHdlrElementGrpId }
STATUS current
DESCRIPTION
"A reference to a group of eventHdlrElement instances,
each of which determines the scope (criteria for
generating a new request) and what context information to
send in a request."
::= { eventHandlerEntry 2}
eventHandlerNonMatchNext OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The data path for 'out of scope' traffic."
::= { eventHandlerEntry 3}
--
-- EventHdlrElement Table
--
-- Each Instance of this PRC belongs to a group of
-- eventHdlrElement PRIs. The group is identified by the
-- eventHdlrElementGrpId attribute. These are provisioned by
-- the PDP on the PEP to catch specific events. This PRC
-- contain the scope of the event and specify the context data
-- type to send to the PDP when an event is caught.
eventHdlrElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventHdlrElementEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"The eventHdlrElementTable specifies a single eventHdlr
element's scope via a reference to a group of filters and
the context data type and encapsulation meta-information
that the PEP needs to send an event notification to the
PDP."
::= { eventHdlrClasses 2 }
eventHdlrElementEntry OBJECT-TYPE
SYNTAX EventHdlrElementEntry
STATUS current
DESCRIPTION
"eventTable entry."
PIB-INDEX { eventHdlrElementId }
UNIQUENESS { eventHdlrElementEventCriteria,
eventHdlrElementGrpId,
eventHdlrElementEventScope,
eventHdlrElementHandleScope,
eventHdlrElementContext,
eventHdlrElementMatchNext
}
::= { eventHdlrElementTable 1}
EventHdlrElementEntry ::= SEQUENCE {
eventHdlrElementId InstanceId,
eventHdlrElementEventCriteria INTEGER,
eventHdlrElementGrpId TagId,
eventHdlrElementEventScope TagReferenceId,
eventHdlrElementHandleScope TagReferenceId,
eventHdlrElementContext TagReferenceId,
eventHdlrElementMatchNext Prid
}
eventHdlrElementId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies
an instance of the eventHdlrElementTable class."
::= { eventHdlrElementEntry 1}
eventHdlrElementEventCriteria OBJECT-TYPE
SYNTAX INTEGER {
onetime(1),
everytime(2),
onchange(3)
}
STATUS current
DESCRIPTION
"Indicates when an event is generated. Valid options are
one_time, every_time and on_change. This attribute allows
event Handlers to distinguish one time events (ignore
after the first match) from recurring events (generate an
event every time a match occurs). A enum type was also
define to specify that a new event should be generated
when a specific set of fields change. This is important
for protocols like RSVP because messages are sent both to
demonstrate that the reservation is active and to notify
hops of changes to reservations. Since only changes need
to propagate to the PDP, the on_change option indicates
that that events should be generated selectively.
This criteria controls behavior of both, the EventScope
and the HandleScope."
::= { eventHdlrElementEntry 2}
eventHdlrElementGrpId OBJECT-TYPE
SYNTAX TagId -- corresponding Tag Reference in
-- eventHandlerEntry
STATUS current
DESCRIPTION
"Group identifier. All instances with the same group
identifier belong to one group and can be referenced
collectively from an eventHandler instance."
::= { eventHdlrElementEntry 3}
eventHdlrElementEventScope OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { eventHdlrEventScopeGroup }
STATUS current
DESCRIPTION
"Identifies a group of eventHdlrEventScope entries
associated with this eventHdlrElement instance."
::= { eventHdlrElementEntry 4}
eventHdlrElementHandleScope OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { eventHdlrHandleScopeGroup }
STATUS current
DESCRIPTION
"Identifies a group of eventHdlrHandleScope entries
associated with this eventHdlrElement instance. This is
an optional attribute. If it is not present the
semantics of the Handle processing is interpreted as
identical to the Event Scope handling specified in the
EventScope objects"
::= { eventHdlrElementEntry 5}
eventHdlrElementContext OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { contextDataGroup }
STATUS current
DESCRIPTION
"Identifies a list of ContextDataTable entries
associated with this eventHdlrElement instance."
::= { eventHdlrElementEntry 6}
eventHdlrElementMatchNext OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The data path for traffic in scope."
::= { eventHdlrElementEntry 7}
--
-- EventHdlrEventScope Table
--
-- This PRC defines the scope of an event handler element using
-- references to filters defined in the Framework PIB or in some
-- other PIBs. These filters may describe specific protocol
-- properties for which events need to be generated. These filter
-- references are grouped using a TagId, and this group is then
-- referenced from the eventHdlrElement PRC.
eventHdlrEventScopeTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventHdlrEventScopeEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"This class defines the criteria to be used for
partitioning various portions of traffic."
::= { eventHdlrClasses 3 }
eventHdlrEventScopeEntry OBJECT-TYPE
SYNTAX EventHdlrEventScopeEntry
STATUS current
DESCRIPTION
"An instance of this class defines an individual criterion
to be used towards generating an event."
PIB-INDEX { eventHdlrEventScopeId }
UNIQUENESS { eventHdlrEventScopeGroup,
eventHdlrEventScopeFilter
}
::= { eventHdlrEventScopeTable 1}
EventHdlrEventScopeEntry::= SEQUENCE {
eventHdlrEventScopeId InstanceId,
eventHdlrEventScopeGroup TagId,
eventHdlrEventScopeFilter Prid,
eventHdlrEventScopePrecedence INTEGER,
eventHdlrEventScopeChangeFlag TruthValue
}
eventHdlrEventScopeId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the eventHdlrEventScopeTable class."
::= { eventHdlrEventScopeEntry 1}
eventHdlrEventScopeGroup OBJECT-TYPE
SYNTAX TagId -- corresponding TagReference
-- defined in eventHdlrElementEntry
STATUS current
DESCRIPTION
"Represents the binding between the eventHdlrElementEntry
and the eventHdlrEventScope entries. A group of
eventHdlrEventScope entries constitutes the criteria for
partitioning various portions of traffic."
::= { eventHdlrEventScopeEntry 2}
eventHdlrEventScopeFilter OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"Pointer to a filter to be used as the criteria."
::= { eventHdlrEventScopeEntry 3}
eventHdlrEventScopePrecedence OBJECT-TYPE
SYNTAX INTEGER
STATUS current
DESCRIPTION
"Represents the precedence of this criterion with respect
to other criteria within the same group. When the
precedence is unique, the instance represents an
alternative criteria (an ORing function). When the
precedence for two or more instances of the
eventHdlrEventScope class is the same, the attributes
within all the instances are treated collectively as a
single filter criteria with the following rules:
1. If the filters are not of the same type, the filters
are ANDed as a whole eg (RSVP and IP)
2. If the filter types are the same, the attribute values
are ORed and the attributes themselves are ANDed,
for example, two IP filters with src protocol values
56 and 57 respectively and dst protocol values 20 and
25 , would be treated as the condition (src port (56
or 57) AND dst port (20 or 25)."
::= { eventHdlrEventScopeEntry 4}
eventHdlrEventScopeChangeFlag OBJECT-TYPE
SYNTAX TruthValue
STATUS current
DESCRIPTION
"Boolean value, if set to 'true' indicates that a new
event should be generated if any of the assigned fields in
the associated filter change."
::= { eventHdlrEventScopeEntry 5}
--
-- EventHdlrHandleScope Table
--
-- This PRC defines the scope of request handles generated by the
-- PEP due to events caught by the event handler element. Each
-- instance of this PRC references filters defined in the
-- Framework PIB or some other signaling-protocol specific filter
-- PRCs. These filters may describe specific protocol properties
-- to which this event handler is sensitive. Essentially this
-- table defines when a new COPS RequestHandle must be created by
-- the PEP based on protocol properties. The event handler may be
-- set up to be sensitive to specific field values and/or the
-- uniqueness of a set of values considered together. This
-- accommodates various behaviors of signaling protocols. These
-- filters references are grouped using a TagId, and this group
-- is then referenced from the eventHdlrElement PRC via the
-- eventHdlrElementHandleScope TagReference.
eventHdlrHandleScopeTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventHdlrHandleScopeEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"This class defines the criteria to be used for
deciding whether to create a new COPS RequestHandle for
an event or to use an existing Handle."
::= { eventHdlrClasses 4 }
eventHdlrHandleScopeEntry OBJECT-TYPE
SYNTAX EventHdlrHandleScopeEntry
STATUS current
DESCRIPTION
"An instance of this class defines an individual criterion
to be used towards deciding when to create a new Handle."
PIB-INDEX { eventHdlrHandleScopeId }
UNIQUENESS { eventHdlrHandleScopeGroup,
eventHdlrHandleScopeFilter
}
::= { eventHdlrHandleScopeTable 1}
EventHdlrHandleScopeEntry::= SEQUENCE {
eventHdlrHandleScopeId InstanceId,
eventHdlrHandleScopeGroup TagId,
eventHdlrHandleScopeFilter Prid,
eventHdlrHandleScopePrecedence INTEGER,
eventHdlrHandleScopeChangeFlag TruthValue
}
eventHdlrHandleScopeId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the eventHdlrHandleScopeTable class."
::= { eventHdlrHandleScopeEntry 1}
eventHdlrHandleScopeGroup OBJECT-TYPE
SYNTAX TagId -- corresponding TagReference
-- defined in eventHdlrElementEntry
STATUS current
DESCRIPTION
"Represents the binding between the eventHdlrElementEntry
and the eventHdlrHandleScope entries. A group of
eventHdlrHandleScope entries constitutes the criteria for
defining the scope of the Handles generated."
::= { eventHdlrHandleScopeEntry 2}
eventHdlrHandleScopeFilter OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"Pointer to a filter to be used as the criteria."
::= { eventHdlrHandleScopeEntry 3}
eventHdlrHandleScopePrecedence OBJECT-TYPE
SYNTAX INTEGER
STATUS current
DESCRIPTION
"Represents the precedence of this criterion with respect
to other criteria within the same group. When the
precedence is unique, the instance represents an
alternative criteria (an ORing function). When the
precedence for two or more instances of the
eventHdlrHandleScope class is the same, the attributes
within all the instances are treated collectively as a
single filter criteria."
::= { eventHdlrHandleScopeEntry 4}
eventHdlrHandleScopeChangeFlag OBJECT-TYPE
SYNTAX TruthValue
STATUS current
DESCRIPTION
"Boolean value, if set to 'true' indicates that a new
Handle should be generated to send the event request if
any of the assigned fields in the associated filter
change."
::= { eventHdlrHandleScopeEntry 5}
--
-- EventHdlrAuthProtocol Table
--
-- This PRC specifies the Auth Mechanism to use in the Access
-- request when a data path Event Handler is configured to
-- catch access events.
eventHdlrAuthProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventHdlrAuthProtocolEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"This class lists the authentication protocols that can
be used for an access request."
::= { eventHdlrClasses 5 }
eventHdlrAuthProtocolEntry OBJECT-TYPE
SYNTAX EventHdlrAuthProtocolEntry
STATUS current
DESCRIPTION
"An instance of this class describes an authentication
protocol that may be used for an access request. Instances
of this class that share the same TagId value collectively
constitute a list of authentication protocols that may be
used for a given access request"
PIB-INDEX { eventHdlrAuthProtocolId }
UNIQUENESS { eventHdlrAuthProtocolGroup,
eventHdlrAuthProtocolAuthMechanism
}
::= { eventHdlrAuthProtocolTable 1}
EventHdlrAuthProtocolEntry::= SEQUENCE {
eventHdlrAuthProtocolId InstanceId,
eventHdlrAuthProtocolGroup TagId,
eventHdlrAuthProtocolAuthMechanism INTEGER
}
eventHdlrAuthProtocolId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the ContextDataTable class."
::= { eventHdlrAuthProtocolEntry 1}
eventHdlrAuthProtocolGroup OBJECT-TYPE
SYNTAX TagId -- corresponding TagReference
-- in datapathEventHdlrEntry
STATUS current
DESCRIPTION
"Represents a binding between an datapathEventHdlrTable
instance and a list of eventHdlrAuthProtocolTable
instances."
::= { eventHdlrAuthProtocolEntry 2}
eventHdlrAuthProtocolAuthMechanism OBJECT-TYPE
SYNTAX INTEGER {
mPAP (0),
mCHAP (1),
mEAPMD5(2),
mEAPTLS(3)
}
STATUS current
DESCRIPTION
"The authentication protocol that may be used for an
access request."
::= { eventHdlrAuthProtocolEntry 3}
--
-- DataPath Event Handler Table
--
-- This PRC is an extension of the EventHandler PRC. This
-- extension illustrates the use of the EventHandler PRC
-- concept for authentication usage. Instances of this PRC are
-- provisioned by the PDP on the PEP to catch specific access
-- events. This PRC references a group of
-- eventHdlrAuthProtocol instances which define a set of
-- Authentication mechanisms to use if an access event is
-- caught by this event Handler. From its base class (Event
-- Handler) this PRC also references a group of
-- eventHdlrElement PRIs that contain the scope of the
-- access event and specify the context data to send to the
-- PDP when an access event is caught.
datapathEventHdlrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DatapathEventHdlrEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"The datapathEventHdlrTable specifies for what access
events the PEP should send an access request to the PDP.
As a result of this access request, the PEP may send
configuration changes to the PEP or specific policies for
specific users. An instance of this class defines the
circumstances for generating an access request, and
provides the means for specifying the authentication
mechanisms and contents of the PEP Request. Hence, the
datapathEventHdlrTable can be said to create eventTable
entries for user access. "
::= { eventHdlrClasses 6 }
datapathEventHdlrEntry OBJECT-TYPE
SYNTAX DatapathEventHdlrEntry
STATUS current
DESCRIPTION
"dataPathEventHdlrTable entry."
EXTENDS { eventHandlerEntry }
UNIQUENESS { eventHandlerElements,
eventHandlerNonMatchNext,
datapathEventHdlrRequestAuth
}
::= { datapathEventHdlrTable 1}
DatapathEventHdlrEntry ::= SEQUENCE {
datapathEventHdlrRequestAuth TruthValue,
datapathEventHdlrAuthProtocol TagReferenceId
}
datapathEventHdlrRequestAuth OBJECT-TYPE
SYNTAX TruthValue
STATUS current
DESCRIPTION
"Boolean flag, if set to 'true' requires authentication
data to be sent in the request sent to the PDP with the
access event."
::= { datapathEventHdlrEntry 1}
datapathEventHdlrAuthProtocol OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { eventHdlrAuthProtocolGroup }
STATUS current
DESCRIPTION
"References a group of eventHdlrAuthProtocol instances,
each of which specifies an authentication mechanism."
::= { datapathEventHdlrEntry 2}
--
-- ContextData Table
--
-- This PRC specifies the context information to send to the PDP
-- when an event is caught. The context information to send is
-- described in terms of the PRC data types to include in the
-- request, the level of encapsulated data and the interface
-- information for that request.
contextDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ContextDataEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"This class points to the context information to be
included with a request."
::= { contextClasses 1 }
contextDataEntry OBJECT-TYPE
SYNTAX ContextDataEntry
STATUS current
DESCRIPTION
"An instance of this class contains the type description
(the assigned OID) of the class which needs to be filled
in by the PEP and included with a PEP request."
PIB-INDEX { contextDataId }
UNIQUENESS { }
::= { contextDataTable 1}
ContextDataEntry::= SEQUENCE {
contextDataId InstanceId,
contextDataGroup TagId,
contextDataIfElement PrcIdentifierOid,
contextDataEncapsulation INTEGER
}
contextDataId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the contextDataTable class."
::= { contextDataEntry 1}
contextDataGroup OBJECT-TYPE
SYNTAX TagId --corresponding TagReference
--defined in eventHdlrElement
STATUS current
DESCRIPTION
"Defines the grouping of contextData instances
that are applicable to a given eventHdlrElement. When
instances of this PRC are sent to the PEP without the
event Handler information, this attribute is unused."
::= { contextDataEntry 2}
contextDataIfElement OBJECT-TYPE
SYNTAX PrcIdentifierOid
STATUS current
DESCRIPTION
"The OID of a class whose instance is to be included with
the PEP request or event-specific ContextData Response."
::= { contextDataEntry 3}
contextDataEncapsulation OBJECT-TYPE
SYNTAX INTEGER
STATUS current
DESCRIPTION
"This attribute allows one to distinguish between inner
and outer headers when there are multiple encapsulated
headers of the same type in a packet.
A value of:
0 means all headers,
positive number 'n' means the 'n'th header starting
from the outermost,
negative number 'n' means the 'n'th header starting from
the innermost."
::= { contextDataEntry 4}
--
-- Layer 3 Header Data PRC
--
ctxtL3HdrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtL3HdrEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"An instance of this class is created by the PEP and
sent to the PDP to provide the PDP with information it
requested in the ContextData PRC. The PDP uses
this PRC to make Authentication/Provisioning
decisions."
::= { contextClasses 2 }
ctxtL3HdrEntry OBJECT-TYPE
SYNTAX CtxtL3HdrEntry
STATUS current
DESCRIPTION
"An instance of the ctxtL3HdrTable PRC."
PIB-INDEX { ctxtL3HdrId }
UNIQUENESS { }
::= { ctxtL3HdrTable 1 }
CtxtL3HdrEntry::= SEQUENCE {
ctxtL3HdrId InstanceId,
ctxtL3HdrSrcAddrType InetAddressType,
ctxtL3HdrSrcAddr InetAddress,
ctxtL3HdrDstAddrType InetAddressType,
ctxtL3HdrDstAddr InetAddress,
ctxtL3HdrProtocol Unsigned32,
ctxtL3HdrSrcPort Unsigned32,
ctxtL3HdrDstPort Unsigned32,
ctxtL3HdrDscp Unsigned32,
ctxtL3HdrEcn TruthValue,
ctxtL3HdrIpOpt OCTET STRING,
ctxtL3HdrEncap Integer32
}
ctxtL3HdrId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify an instance of this
provisioning class."
::= { ctxtL3HdrEntry 1 }
ctxtL3HdrSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify
the type of the packet's source L3 address)."
::= { ctxtL3HdrEntry 2 }
ctxtL3HdrSrcAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
" The packet's source L3 address."
::= { ctxtL3HdrEntry 3 }
ctxtL3HdrDstAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify
the type of the packet's destination L3 address."
::= { ctxtL3HdrEntry 4 }
ctxtL3HdrDstAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The packet's destination L3 address."
::= { ctxtL3HdrEntry 5 }
ctxtL3HdrProtocol OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The packet's protocol field."
::= { ctxtL3HdrEntry 6 }
ctxtL3HdrSrcPort OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"This attribute binds an existing upstream session to
this session instance."
::= { ctxtL3HdrEntry 7 }
ctxtL3HdrDstPort OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"This attribute binds an existing upstream session to
this session instance."
::= { ctxtL3HdrEntry 8 }
ctxtL3HdrDscp OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"DiffServ CodePoint."
::= { ctxtL3HdrEntry 9 }
ctxtL3HdrEcn OBJECT-TYPE
SYNTAX TruthValue
STATUS current
DESCRIPTION
"PEP sets this attribute to true(1) if ECN capable."
::= { ctxtL3HdrEntry 10 }
ctxtL3HdrIpOpt OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"IP Options field in the packet."
::= { ctxtL3HdrEntry 11 }
ctxtL3HdrEncap OBJECT-TYPE
SYNTAX Integer32
STATUS current
DESCRIPTION
"This attribute specifies which encapsulated header is
being described. The sign on this value will be the same
as the value specified in the ContextData
instance that requested this header. If the original
ContextData instance specified a
ContextDataEncapsulation value of zero (meaning
return all headers), then all instances of this attribute
MUST be expressed as positive numbers.
A value of:
positive number 'n' means the 'n'th header starting
from the outermost,
negative number 'n' means the 'n'th header starting from
the innermost."
::= { ctxtL3HdrEntry 12 }
--
-- 802.1 Header Data PRC
--
ctxt802HdrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ctxt802HdrEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"An instance of this class is created by the PEP and sent
to the PDP to provide the PDP with information it
requested in the ContextData PRC. The PDP uses this PRC
to make Authorization/Provisioning decisions."
::= { contextClasses 3 }
ctxt802HdrEntry OBJECT-TYPE
SYNTAX Ctxt802HdrEntry
STATUS current
DESCRIPTION
"An instance of the ctxt802HdrTable PRC."
PIB-INDEX { ctxt802HdrId }
UNIQUENESS { }
::= { ctxt802HdrTable 1 }
Ctxt802HdrEntry::= SEQUENCE {
ctxt802HdrId InstanceId,
ctxt802HdrSrcAddr PhysAddress,
ctxt802HdrDstAddr PhysAddress,
ctxt802HdrProtocol Unsigned32,
ctxt802HdrPriority Unsigned32,
ctxt802HdrVlan Unsigned32,
ctxt802HdrEncap Integer32
}
ctxt802HdrId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify an instance of this
provisioning class."
::= { ctxt802HdrEntry 1 }
ctxt802HdrSrcAddr OBJECT-TYPE
SYNTAX PhysAddress
STATUS current
DESCRIPTION
" The packet's source MAC address."
::= { ctxt802HdrEntry 2 }
ctxt802HdrDstAddr OBJECT-TYPE
SYNTAX PhysAddress
STATUS current
DESCRIPTION
"The packet's destination MAC address."
::= { ctxt802HdrEntry 3 }
ctxt802HdrProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..'ffff'h)
STATUS current
DESCRIPTION
"The L2 packet's protocol field."
::= { ctxt802HdrEntry 4 }
ctxt802HdrPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
STATUS current
DESCRIPTION
"The L2 packet's priority field. This attribute is only
valid for packets using the 802.1q header extension."
::= { ctxt802HdrEntry 5 }
ctxt802HdrVlan OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
STATUS current
DESCRIPTION
"The L2 packet's VLAN field. This attribute is only valid
for packets using the 802.1q header extension."
::= { ctxt802HdrEntry 6 }
ctxt802HdrEncap OBJECT-TYPE
SYNTAX Integer32
STATUS current
DESCRIPTION
"This attribute specifies which encapsulated header is
being described. The sign on this value will be the same
as the value specified in the ContextData
instance that requested this header. If the original
ContextData instance specified an
ContextDataEncapsulation value of zero (meaning
return all headers), then all instances of this attribute
MUST be expressed as positive numbers.
A value of:
positive number 'n' means the 'n'th header starting
from the outermost,
negative number 'n' means the 'n'th header starting from
the innermost."
::= { ctxt802HdrEntry 7 }
--
-- CtxtDialupInterface Table
--
ctxtDialupInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtDialupInterfaceEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"Dialup Interface context data."
::= { contextClasses 4 }
ctxtDialupInterfaceEntry OBJECT-TYPE
SYNTAX CtxtDialupInterfaceEntry
STATUS current
DESCRIPTION
"Entry oid of the ctxtDialupInterfaceTable PRC."
PIB-INDEX { ctxtDialupInterfaceId }
UNIQUENESS { }
::= { ctxtDialupInterfaceTable 1 }
CtxtDialupInterfaceEntry::= SEQUENCE {
ctxtDialupInterfaceId InstanceId,
ctxtDialupInterfaceNASPort Integer32,
ctxtDialupInterfaceNASPortId OCTET STRING,
ctxtDialupInterfaceNASPortType INTEGER,
ctxtDialupInterfaceCalledStationId OCTET STRING,
ctxtDialupInterfaceCallingStationId OCTET STRING,
ctxtDialupInterfaceConnectInfo OCTET STRING
}
ctxtDialupInterfaceId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify an instance of this
provisioning class."
::= { ctxtDialupInterfaceEntry 1 }
ctxtDialupInterfaceNASPort OBJECT-TYPE
SYNTAX Integer32
STATUS current
DESCRIPTION
"This Attribute indicates the physical port number of the
NAS which is authenticating the user. It is only used in
Access-Request packets. Note that this is using 'port'
in its sense of a physical connection on the NAS, not in
the sense of a TCP or UDP port number."
::= { ctxtDialupInterfaceEntry 2 }
ctxtDialupInterfaceNASPortId OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"This Attribute contains a text string which identifies
the port of the NAS which is authenticating the user. It
is only used in Access-Request and Accounting-Request
packets. Note that this is using 'port' in its sense of
a physical connection on the NAS, not in the sense of a
TCP or UDP port number. "
::= { ctxtDialupInterfaceEntry 3 }
ctxtDialupInterfaceNASPortType OBJECT-TYPE
SYNTAX INTEGER {
radAsync(0),
radSync(1),
radIsdnSync(2),
radIsdnAsyncV120(3),
radIsdnAsyncV110(4),
radVirtual(5),
radPIAFS(6),
radHdlcClearChannel(7),
radX25(8),
radX75(9),
radG3Fax(10),
radSDSL(11),
radAdslCAP(12),
radAdslDMT(13),
radIdsl(14),
radEthernet(15),
radXdsl(16),
radCable(17),
radWirelessOther(18),
radWirelessIEEE80211(19)
}
STATUS current
DESCRIPTION
"This Attribute indicates the type of the physical port
of the NAS which is authenticating the user. It can be
used instead of or in addition to the radNasPort (5)
attribute. It is only used in Access-Request packets.
Either radNasPort (5) or radNasPortType or both SHOULD be
present in an Access-Request packet, if the NAS
differentiates among its ports.
A value of 'radAsync(0)' indicates Async.
A value of 'radSync(1)' indicates Sync.
A value of 'radIsdnSync(2)' indicates ISDN Sync.
A value of 'radIsdnAsyncV120(3)' indicates ISDN
Async V.120.
A value of 'radIsdnAsyncV110(4)' indicates ISDN
Async V.110.
A value of 'radVirtual(5)' indicates Virtual.
Virtual refers to a connection to the NAS via some
transport protocol, instead of through a physical
port. For example, if a user telnetted into a NAS to
authenticate himself as an Outbound-User, the
Access-Request might include radNasPortType =
Virtual as a hint to the RADIUS server that the user
was not on a physical port.
A value of 'radPIAFS(6)' indicates PIAFS. PIAFS is a
form of wireless ISDN commonly used in Japan, and
stands for PHS (Personal Handyphone System) Internet
Access Forum Standard (PIAFS).
A value of 'radHdlcClearChannel(7)' indicates HDLC
Clear Channel.
A value of 'radX25(8)' indicates X.25.
A value of 'radX75(9)' indicates X.75.
A value of 'radG3Fax(10)' indicates G.3 Fax.
A value of 'radSDSL(11)' indicates SDSL Symmetric
DSL.
A value of 'radAdslCAP(12)' indicates ADSL-CAP -
Asymmetric DSL, Carrierless Amplitude Phase
Modulation.
A value of 'radAdslDMT(13)' indicates ADSL-DMT -
Asymmetric DSL, Discrete Multi-Tone.
A value of 'radIdsl(14)' indicates IDSL ISDN
Digital Subscriber Line.
A value of 'radEthernet(15)' indicates Ethernet.
A value of 'radXdsl(16)' indicates xDSL - Digital
Subscriber Line of unknown type.
A value of 'radCable(17)' indicates Cable.
A value of 'radWirelessOther(18)' indicates Wireless
- Other.
A value of 'radWirelessIEEE80211(19)' indicates
Wireless - IEEE 802.11."
::= { ctxtDialupInterfaceEntry 4 }
ctxtDialupInterfaceCalledStationId OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"This Attribute allows the NAS to send in the Access-
Request packet the phone number that the user called,
using Dialed Number Identification (DNIS) or similar
technology. Note that this may be different from the
phone number the call comes in on. It is only used in
Access-Request packets. "
::= { ctxtDialupInterfaceEntry 5 }
ctxtDialupInterfaceCallingStationId OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"This Attribute allows the NAS to send in the Access-
Request packet the phone number that the user is calling
from, using Dialed Number Identification (DNIS) or
similar technology. Note that this may be different from
the phone number called. It is only used in
Access-Request packets. "
::= { ctxtDialupInterfaceEntry 6 }
ctxtDialupInterfaceConnectInfo OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"This Attribute allows the NAS to send in the Access-
Request packet the phone number that the call came from,
using Automatic Number Identification (ANI) or similar
technology. It is only used in Access-Request packets."
::= { ctxtDialupInterfaceEntry 7 }
---
--- CtxtDialupInterfaceFramedProtocol Table
---
ctxtDialupIfFramedProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtDialupIfFramedProtocolEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"."
::= { contextClasses 5 }
ctxtDialupIfFramedProtocolEntry OBJECT-TYPE
SYNTAX CtxtDialupIfFramedProtocolEntry
STATUS current
DESCRIPTION
"Entry oid of the ctxtDialupIfFramedProtocolTable PRC."
PIB-INDEX { ctxtDialupIfFramedProtocolId }
UNIQUENESS { }
::= { ctxtDialupIfFramedProtocolTable 1 }
CtxtDialupIfFramedProtocolEntry ::= SEQUENCE {
ctxtDialupIfFramedProtocolId InstanceId,
ctxtDialupIfFramedProtocolProt INTEGER,
ctxtDialupIfFramedProtocolMTU Integer32,
ctxtDialupIfFramedProtocolCompression INTEGER,
ctxtDialupIfFramedProtocolPortLimit Unsigned32,
ctxtDialupIfFramedProtocolIpAddress InetAddress,
ctxtDialupIfFramedProtocolIpNetmask InetAddress
}
ctxtDialupIfFramedProtocolId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify an instance of this
provisioning class."
::= { ctxtDialupIfFramedProtocolEntry 1 }
ctxtDialupIfFramedProtocolProt OBJECT-TYPE
SYNTAX INTEGER {
radPPP(1),
radSLIP(2),
radARAP(3),
radGandalf(4),
radXylogics(5),
radX75Synchronous(6)
}
STATUS current
DESCRIPTION
"This Attribute indicates the framing to be used for
framed access. It MAY be used in both Access-Request and
Access-Accept packets.
A value of 'radPPP(1)' represents PPP.
A value of 'radSLIP(2)' represents SLIP.
A value of 'radARAP(3)' represents AppleTalk Remote
Access Protocol (ARAP).
A value of 'radGandalf(4)' represents Gandalf
proprietary SingleLink/MultiLink protocol.
A value of 'radXylogics(5)' represents Xylogics
proprietary IPX/SLIP.
A value of 'radX75Synchronous(6)' represents X.75
Synchronous."
::= { ctxtDialupIfFramedProtocolEntry 2 }
ctxtDialupIfFramedProtocolMTU OBJECT-TYPE
SYNTAX Integer32
STATUS current
DESCRIPTION
"This Attribute indicates the Maximum Transmission Unit
to be configured for the user, when it is not negotiated
by some other means (such as PPP). It MAY be used in
Access-Accept packets. It MAY be used in an Access-
Request packet as a hint by the NAS to the server that it
would prefer that value, but the server is not required
to honor the hint."
::= { ctxtDialupIfFramedProtocolEntry 3 }
ctxtDialupIfFramedProtocolCompression OBJECT-TYPE
SYNTAX INTEGER {
radNone(0),
radVJ(1),
radIPXheader(2),
radStacLZS(3)
}
STATUS current
DESCRIPTION
"This Attribute indicates a compression protocol to be
used for the link. It MAY be used in Access-Accept
packets. It MAY be used in an Access-Request packet as a
hint to the server that the NAS would prefer to use that
compression, but the server is not required to honor the
hint.
More than one compression protocol Attribute MAY be sent.
It is the responsibility of the NAS to apply the proper
compression protocol to appropriate link traffic.
A value of 'radNone(0)' indicates None.
A value of 'radVJ(1)' indicates VJ TCP/IP header
compression.
A value of 'radIPXheader(2)' indicates IPX header
compression.
A value of 'radStacLZS(3)' indicates Stac-LZS
compression."
::= { ctxtDialupIfFramedProtocolEntry 4 }
ctxtDialupIfFramedProtocolPortLimit OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"This Attribute sets the maximum number of ports to be
provided to the user by the NAS. This Attribute MAY be
sent by the server to the client in an Access-Accept
packet. It is intended for use in conjunction with
Multilink PPP [10] or similar uses. It MAY also be sent
by the NAS to the server as a hint that that many ports
are desired for use, but the server is not required to
honor the hint."
::= { ctxtDialupIfFramedProtocolEntry 5 }
ctxtDialupIfFramedProtocolIpAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"This Attribute indicates the address to be configured
for the user. It MAY be used in Access-Accept packets.
It MAY be used in an Access-Request packet as a hint by
the NAS to the server that it would prefer that address,
but the server is not required to honor the hint."
::= { ctxtDialupIfFramedProtocolEntry 6 }
ctxtDialupIfFramedProtocolIpNetmask OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"This Attribute indicates the IP netmask to be configured
for the user when the user is a router to a network. It
MAY be used in Access-Accept packets. It MAY be used in
an Access-Request packet as a hint by the NAS to the
server that it would prefer that netmask, but the server
is not required to honor the hint."
::= { ctxtDialupIfFramedProtocolEntry 7 }
---
--- CtxtDialupIfLoginService Table
---
ctxtDialupIfLoginServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtDialupIfLoginServiceEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"Base class."
::= { contextClasses 6 }
ctxtDialupIfLoginServiceEntry OBJECT-TYPE
SYNTAX CtxtDialupIfLoginServiceEntry
STATUS current
DESCRIPTION
"Entry oid of the ctxtDialupIfLoginServiceTable PRC."
PIB-INDEX { ctxtDialupIfLoginServiceId }
UNIQUENESS { }
::= { ctxtDialupIfLoginServiceTable 1 }
CtxtDialupIfLoginServiceEntry::= SEQUENCE {
ctxtDialupIfLoginServiceId InstanceId,
ctxtDialupIfLoginServiceIpHost InetAddress
}
ctxtDialupIfLoginServiceId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify an instance of this
provisioning class."
::= { ctxtDialupIfLoginServiceEntry 1 }
ctxtDialupIfLoginServiceIpHost OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"."
::= { ctxtDialupIfLoginServiceEntry 2 }
---
--- CtxtDialupIfLoginLat Table (Extends
--- CtxtDialupIfLoginService)
---
ctxtDialupIfLoginLatTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtDialupIfLoginLatEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"Extended class."
::= { contextClasses 7 }
ctxtDialupIfLoginLatEntry OBJECT-TYPE
SYNTAX CtxtDialupIfLoginLatEntry
STATUS current
DESCRIPTION
"Entry oid of the ctxtDialupIfLoginLatTable PRC."
EXTENDS { ctxtDialupIfLoginServiceEntry }
UNIQUENESS { }
::= { ctxtDialupIfLoginLatTable 1 }
CtxtDialupIfLoginLatEntry::= SEQUENCE {
ctxtDialupIfLoginLatService OCTET STRING,
ctxtDialupIfLoginLatNode OCTET STRING,
ctxtDialupIfLoginLatGroup OCTET STRING,
ctxtDialupIfLoginLatPort OCTET STRING
}
ctxtDialupIfLoginLatService OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"."
::= { ctxtDialupIfLoginLatEntry 1 }
ctxtDialupIfLoginLatNode OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"."
::= { ctxtDialupIfLoginLatEntry 2 }
ctxtDialupIfLoginLatGroup OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"."
::= { ctxtDialupIfLoginLatEntry 3 }
ctxtDialupIfLoginLatPort OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"."
::= { ctxtDialupIfLoginLatEntry 4 }
--
-- The RSVP Filter table
--
rsvpFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpFilterEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"RSVP specific filter table."
::= { filterClasses 1 }
rsvpFilterEntry OBJECT-TYPE
SYNTAX RsvpFilterEntry
STATUS current
DESCRIPTION
" RSVP specific filter table entry."
PIB-INDEX { rsvpFilterId }
UNIQUENESS { }
::= { rsvpFilterTable 1 }
RsvpFilterEntry ::= SEQUENCE {
rsvpFilterId InstanceId,
rsvpFilterFlags OCTET STRING,
rsvpFilterSendTTL Unsigned32,
rsvpFilterDClassDscp Integer32,
rsvpFilterSessionDestAddrType InetAddressType,
rsvpFilterSessionDestAddr InetAddress,
rsvpFilterSessionDestAddrMask Unsigned32,
rsvpFilterSessionProtocol Integer32,
rsvpFilterSessionDestPort Unsigned32,
rsvpFilterSessionSrcAddrType InetAddressType,
rsvpFilterSessionSrcAddr InetAddress,
rsvpFilterSessionSrcAddrMask Unsigned32,
rsvpFilterSessionSrcPort Unsigned32,
rsvpFilterStyleValue OCTET STRING
}
rsvpFilterId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { rsvpFilterEntry 1 }
rsvpFilterFlags OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"The Flags carried in the RSVP header. Currently all these
flags should be set to zero."
::= { rsvpFilterEntry 2 }
rsvpFilterSendTTL OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
STATUS current
DESCRIPTION
"The IP TTL value with which the message was sent."
::= { rsvpFilterEntry 3 }
rsvpFilterDClassDscp OBJECT-TYPE
SYNTAX Integer32 (-1| 0..63)
STATUS current
DESCRIPTION
"The DClass dscp value."
::= { rsvpFilterEntry 4 }
rsvpFilterSessionDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify the
type of the destination IP address."
::= { rsvpFilterEntry 5 }
rsvpFilterSessionDestAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The destination IP address."
::= { rsvpFilterEntry 6 }
rsvpFilterSessionDestAddrMask OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The length of a mask for the matching of the destination IP
address.."
::= { rsvpFilterEntry 7 }
rsvpFilterSessionProtocol OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
STATUS current
DESCRIPTION
"The IP protocol to match against the packet's protocol. A
value of -1 means match all."
::= { rsvpFilterEntry 8 }
rsvpFilterSessionDestPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
STATUS current
DESCRIPTION
"The packet's Layer 4 destination port."
::= { rsvpFilterEntry 9 }
rsvpFilterSessionSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify the
type of the source IP address."
::= { rsvpFilterEntry 10 }
rsvpFilterSessionSrcAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The source IP address."
::= { rsvpFilterEntry 11 }
rsvpFilterSessionSrcAddrMask OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The length of a mask for the matching of the source IP
address."
::= { rsvpFilterEntry 12 }
rsvpFilterSessionSrcPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
STATUS current
DESCRIPTION
"The packet's Layer 4 source port."
::= { rsvpFilterEntry 13 }
rsvpFilterStyleValue OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"The RSVP packet's Style value."
::= { rsvpFilterEntry 14 }
--
-- RSVP Common Context Data
--
ctxtRsvpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtRsvpEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
""
::= { contextClasses 8 }
ctxtRsvpEntry OBJECT-TYPE
SYNTAX CtxtRsvpEntry
STATUS current
DESCRIPTION
""
PIB-INDEX { ctxtRsvpId }
UNIQUENESS { }
::= { ctxtRsvpTable 1 }
CtxtRsvpEntry ::= SEQUENCE {
ctxtRsvpId InstanceId,
ctxtRsvpMsgType INTEGER,
ctxtRsvpFlags OCTET STRING,
ctxtRsvpSendTTL Unsigned32,
ctxtRsvpInIntfId Unsigned32,
ctxtRsvpInIntfAddrType InetAddressType,
ctxtRsvpInIntfAddr InetAddress,
ctxtRsvpOutIntfId Unsigned32,
ctxtRsvpOutIntfAddrType InetAddressType,
ctxtRsvpOutIntfAddr InetAddress
}
ctxtRsvpId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { ctxtRsvpEntry 1 }
ctxtRsvpMsgType OBJECT-TYPE
SYNTAX INTEGER {
path (1),
pathErr (2),
resv (3),
resvErr (4)
}
STATUS current
DESCRIPTION
"The RSVP message type."
::= { ctxtRsvpEntry 2 }
ctxtRsvpFlags OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"The RSVP flags contained in the message header. They are
currently undefined and should be set to zero."
::= { ctxtRsvpEntry 3 }
ctxtRsvpSendTTL OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
STATUS current
DESCRIPTION
"The IP TTL value."
::= { ctxtRsvpEntry 4 }
ctxtRsvpInIntfId OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The Interface Id."
::= { ctxtRsvpEntry 5 }
ctxtRsvpInIntfAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify the
type of the In Interface IP address."
::= { ctxtRsvpEntry 6 }
ctxtRsvpInIntfAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The In Interface IP address."
::= { ctxtRsvpEntry 7 }
ctxtRsvpOutIntfId OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The Out Interface Id."
::= { ctxtRsvpEntry 8 }
ctxtRsvpOutIntfAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify the
type of the Out Interface IP address."
::= { ctxtRsvpEntry 9 }
ctxtRsvpOutIntfAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The Out Interface IP address."
::= { ctxtRsvpEntry 10 }
--
-- RSVP Path Context Data
--
ctxtRsvpPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtRsvpPathEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
""
::= { contextClasses 9 }
ctxtRsvpPathEntry OBJECT-TYPE
SYNTAX CtxtRsvpPathEntry
STATUS current
DESCRIPTION
""
PIB-INDEX { ctxtRsvpPathId }
UNIQUENESS { }
::= { ctxtRsvpPathTable 1 }
CtxtRsvpPathEntry ::= SEQUENCE {
ctxtRsvpPathId InstanceId,
ctxtRsvpPathTokenRate Unsigned32
}
ctxtRsvpPathId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { ctxtRsvpPathEntry 1 }
ctxtRsvpPathTokenRate OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The token bucket rate for the TSPEC."
::= { ctxtRsvpPathEntry 2 }
--
-- RSVP PathErr Context Data
--
ctxtRsvpPathErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtRsvpPathErrEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
""
::= { contextClasses 10 }
ctxtRsvpPathErrEntry OBJECT-TYPE
SYNTAX CtxtRsvpPathErrEntry
STATUS current
DESCRIPTION
""
PIB-INDEX { ctxtRsvpPathErrId }
UNIQUENESS { }
::= { ctxtRsvpPathErrTable 1 }
CtxtRsvpPathErrEntry ::= SEQUENCE {
ctxtRsvpPathErrId InstanceId,
ctxtRsvpPathErrTokenRate Unsigned32,
ctxtRsvpPathErrErrorAddrType InetAddressType,
ctxtRsvpPathErrErrorAddr InetAddress,
ctxtRsvpPathErrErrorCode Unsigned32,
ctxtRsvpPathErrErrorValue Unsigned32
}
ctxtRsvpPathErrId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { ctxtRsvpPathErrEntry 1 }
ctxtRsvpPathErrTokenRate OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The token bucket rate for the TSPEC."
::= { ctxtRsvpPathErrEntry 2 }
ctxtRsvpPathErrErrorAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type IP address in error."
::= { ctxtRsvpPathErrEntry 3 }
ctxtRsvpPathErrErrorAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The Error IP address."
::= { ctxtRsvpPathErrEntry 4 }
ctxtRsvpPathErrErrorCode OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The RSVP error code."
::= { ctxtRsvpPathErrEntry 5 }
ctxtRsvpPathErrErrorValue OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The RSVP error value."
::= { ctxtRsvpPathErrEntry 6 }
--
-- RSVP Resv Context Data
--
ctxtRsvpResvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtRsvpResvEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
""
::= { contextClasses 11 }
ctxtRsvpResvEntry OBJECT-TYPE
SYNTAX CtxtRsvpResvEntry
STATUS current
DESCRIPTION
""
PIB-INDEX { ctxtRsvpResvId }
UNIQUENESS { }
::= { ctxtRsvpResvTable 1 }
CtxtRsvpResvEntry ::= SEQUENCE {
ctxtRsvpResvId InstanceId,
ctxtRsvpResvFSpecGrp TagReferenceId,
ctxtRsvpResvSvcType INTEGER,
ctxtRsvpResvTokenRate Unsigned32
}
ctxtRsvpResvId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { ctxtRsvpResvEntry 1 }
ctxtRsvpResvFSpecGrp OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { ctxtRsvpFilterSpecTagId }
STATUS current
DESCRIPTION
"Identifies a group of Filter Spec entries."
::= { ctxtRsvpResvEntry 2 }
ctxtRsvpResvSvcType OBJECT-TYPE
SYNTAX INTEGER {
controlledLoad(1),
guaranteed(2)
}
STATUS current
DESCRIPTION
"An enum describing the type of service."
::= { ctxtRsvpResvEntry 3 }
ctxtRsvpResvTokenRate OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The token bucket rate for the TSPEC."
::= { ctxtRsvpResvEntry 4 }
--
-- RSVP ResvErr Context Data
--
ctxtRsvpResvErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtRsvpResvErrEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
""
::= { contextClasses 12 }
ctxtRsvpResvErrEntry OBJECT-TYPE
SYNTAX CtxtRsvpResvErrEntry
STATUS current
DESCRIPTION
""
PIB-INDEX { ctxtRsvpResvErrId }
UNIQUENESS { }
::= { ctxtRsvpResvErrTable 1 }
CtxtRsvpResvErrEntry ::= SEQUENCE {
ctxtRsvpResvErrId InstanceId,
ctxtRsvpResvErrFSpecGrp TagReferenceId,
ctxtRsvpResvErrSvcType INTEGER,
ctxtRsvpResvErrTokenRate Unsigned32,
ctxtRsvpResvErrErrorAddrType InetAddressType,
ctxtRsvpResvErrErrorAddr InetAddress,
ctxtRsvpResvErrErrorCode Unsigned32,
ctxtRsvpResvErrErrorValue Unsigned32
}
ctxtRsvpResvErrId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { ctxtRsvpResvErrEntry 1 }
ctxtRsvpResvErrFSpecGrp OBJECT-TYPE
SYNTAX TagReferenceId
PIB-TAG { ctxtRsvpFilterSpecTagId }
STATUS current
DESCRIPTION
"Identifies a group of Filter Spec entries."
::= { ctxtRsvpResvErrEntry 2 }
ctxtRsvpResvErrSvcType OBJECT-TYPE
SYNTAX INTEGER {
controlledLoad(1),
guaranteed(2)
}
STATUS current
DESCRIPTION
"An enum describing the type of service."
::= { ctxtRsvpResvErrEntry 3 }
ctxtRsvpResvErrTokenRate OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The token bucket rate for the TSPEC."
::= { ctxtRsvpResvErrEntry 4 }
ctxtRsvpResvErrErrorAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type IP address in error."
::= { ctxtRsvpResvErrEntry 5 }
ctxtRsvpResvErrErrorAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The Error IP address."
::= { ctxtRsvpResvErrEntry 6 }
ctxtRsvpResvErrErrorCode OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The RSVP error code."
::= { ctxtRsvpResvErrEntry 7 }
ctxtRsvpResvErrErrorValue OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"The RSVP error value."
::= { ctxtRsvpResvErrEntry 8 }
--
-- RSVP Filter Spec Context Data
--
ctxtRsvpFilterSpecTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtxtRsvpFilterSpecEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
""
::= { contextClasses 13 }
ctxtRsvpFilterSpecEntry OBJECT-TYPE
SYNTAX CtxtRsvpFilterSpecEntry
STATUS current
DESCRIPTION
""
PIB-INDEX { ctxtRsvpFilterSpecId }
UNIQUENESS { }
::= { ctxtRsvpFilterSpecTable 1 }
CtxtRsvpFilterSpecEntry::= SEQUENCE {
ctxtRsvpFilterSpecId InstanceId,
ctxtRsvpFilterSpecTagId TagId,
ctxtRsvpFilterSpecAddrType InetAddressType,
ctxtRsvpFilterSpecAddr InetAddress,
ctxtRsvpFilterSpecPort Unsigned32
}
ctxtRsvpFilterSpecId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies an
instance of the class."
::= { ctxtRsvpFilterSpecEntry 1 }
ctxtRsvpFilterSpecTagId OBJECT-TYPE
SYNTAX TagId
STATUS current
DESCRIPTION
"Identifies the group of Filter Spec PRIs that this PRI
belongs to."
::= { ctxtRsvpFilterSpecEntry 2 }
ctxtRsvpFilterSpecAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value [INETADDR] to specify the
type of the IP address."
::= { ctxtRsvpFilterSpecEntry 3 }
ctxtRsvpFilterSpecAddr OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The Filter Spec IP address."
::= { ctxtRsvpFilterSpecEntry 4 }
ctxtRsvpFilterSpecPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
STATUS current
DESCRIPTION
"The packet's Layer 4 destination port."
::= { ctxtRsvpFilterSpecEntry 5 }
--
-- Authentication Extension Tables
--
--
-- AuthExtensions Base Table
--
authExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthExtEntry
PIB-ACCESS install-notify
STATUS current
DESCRIPTION
"This is an abstract PRC. This PRC can be extended by
authentication PRCs that contain attributes specific to
that authentication protocol. An instance of the extended
class is created by the PEP and sent to the PDP. The PDP
may send information back to the PEP or may uses the
information to authenticate the PEP's access request.
This PRC itself should not be instantiated.
This is a 'transient' class. Its instances are temporary
and are deleted by the PEP after a certain time/event.
Thus it must not be referred to by the server."
::= { authClasses 1 }
authExtEntry OBJECT-TYPE
SYNTAX AuthExtEntry
STATUS current
DESCRIPTION
"Entry oid for the AuthExtTable PRC."
PIB-INDEX { authExtId }
UNIQUENESS { }
::= { authExtTable 1 }
AuthExtEntry ::= SEQUENCE {
authExtId InstanceId
}
authExtId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An index to uniquely identify an instance of the
entended provisioning class."
::= { authExtEntry 1 }
--
-- UserAuthExt Table
--
userAuthExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserAuthExtEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"This is a concrete PRC used to contain user
authentication fields. This PRC extends the base PRC
authExtEntry."
::= { authClasses 2 }
userAuthExtEntry OBJECT-TYPE
SYNTAX UserAuthExtEntry
STATUS current
DESCRIPTION
"Entry for the UserAuthExtTable PRC. InstanceId's for
this extended PRC are assigned by the base PRC AuthExt
[SPPI]."
EXTENDS { authExtEntry }
UNIQUENESS { }
::= { userAuthExtTable 1 }
UserAuthExtEntry ::= SEQUENCE {
userAuthExtRealm OCTET STRING,
userAuthExtUsername OCTET STRING
}
userAuthExtRealm OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"user realm octet string."
::= { userAuthExtEntry 1 }
userAuthExtUsername OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"Username octet string."
::= { userAuthExtEntry 2 }
--
-- AuthChapExt Table
--
authChapExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthChapExtEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"This is a concrete PRC used to contain CHAP
authentication fields. This PRC extends the PRC
userAuthExtEntry."
::= { authClasses 3 }
authChapExtEntry OBJECT-TYPE
SYNTAX AuthChapExtEntry
STATUS current
DESCRIPTION
"Entry oid for the AuthChapExtTable PRC. InstanceId's for
this extended PRC are assigned by the base PRC [SPPI]."
EXTENDS { userAuthExtEntry }
UNIQUENESS { }
::= { authChapExtTable 1 }
AuthChapExtEntry::= SEQUENCE {
authChapExtId Unsigned32,
authChapExtChal OCTET STRING,
authChapExtResp OCTET STRING
}
authChapExtId OBJECT-TYPE
SYNTAX Unsigned32
STATUS current
DESCRIPTION
"CHAP Id field."
::= { authChapExtEntry 1 }
authChapExtChal OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"CHAP Challenge octet string. The challenge is generated
by the PEP."
::= { authChapExtEntry 2 }
authChapExtResp OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"CHAP Challenge Response octet string. The challenge
response is sent to the PDP along with the challenge."
::= { authChapExtEntry 3 }
--
-- AuthPapExt Table
--
authPapExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthPapExtEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"This is a concrete PRC used to contain PAP
authentication fields. This PRC extends the PRC
userAuthExtEntry."
::= { authClasses 4 }
authPapExtEntry OBJECT-TYPE
SYNTAX AuthPapExtEntry
STATUS current
DESCRIPTION
"Entry oid for the AuthPapExtTable PRC. InstanceId's for
this extended PRC are assigned by the base PRC [SPPI]."
EXTENDS { userAuthExtEntry }
UNIQUENESS { }
::= { authPapExtTable 1 }
AuthPapExtEntry::= SEQUENCE {
authPapExtPwd OCTET STRING
}
authPapExtPwd OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"PAP password octet string."
::= { authPapExtEntry 1 }
--
-- AuthExtResult Table
--
authExtResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthExtResultEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"This is a concrete PRC used to contain authentication
results. This PRC extends the base PRC authExtEntry."
::= { authClasses 5 }
authExtResultEntry OBJECT-TYPE
SYNTAX AuthExtResultEntry
STATUS current
DESCRIPTION
"Entry for the authExtResultTable PRC. InstanceId's for
this extended PRC are assigned by the base PRC AuthExt
[SPPI]."
EXTENDS { authExtEntry }
UNIQUENESS { }
::= { authExtResultTable 1 }
AuthExtResultEntry ::= SEQUENCE {
authExtResultSuccess TruthValue
}
authExtResultSuccess OBJECT-TYPE
SYNTAX TruthValue
STATUS current
DESCRIPTION
"Set to 'true' if authentication was successful, else
false."
::= { authExtResultEntry 1 }
--
-- AuthEapReqExt Table
--
authEapReqExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthEapReqExtEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"This is a concrete PRC used to contain EAP
authentication fields. This PRC extends the base PRC
authExtEntry. The PEP uses this PRC to send EAP messages
to the PDP."
::= { authClasses 6 }
authEapReqExtEntry OBJECT-TYPE
SYNTAX AuthEapReqExtEntry
STATUS current
DESCRIPTION
"Entry oid for the authEapReqExtTable PRC. InstanceId's
for this extended PRC are assigned by the base PRC
[SPPI]."
EXTENDS { authExtEntry }
UNIQUENESS { }
::= { authEapReqExtTable 1 }
AuthEapReqExtEntry::= SEQUENCE {
authEapReqExtSpecific OCTET STRING
}
authEapReqExtSpecific OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"Opaque EAP Request octet string."
::= { authEapReqExtEntry 1 }
--
-- AuthEapRespExt Table
--
authEapRespExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthEapRespExtEntry
PIB-ACCESS install
STATUS current
DESCRIPTION
"This is a concrete PRC used to contain EAP
authentication fields. This PRC extends the base PRC
authExtEntry. The PDP responds using this PRC for EAP
exchanges."
::= { authClasses 7 }
authEapRespExtEntry OBJECT-TYPE
SYNTAX AuthEapRespExtEntry
STATUS current
DESCRIPTION
"Entry oid for the authEapRespExtTable PRC. InstanceId's
for this extended PRC are assigned by the base PRC
[SPPI]."
EXTENDS { authExtEntry }
UNIQUENESS { }
::= { authEapRespExtTable 1 }
AuthEapRespExtEntry::= SEQUENCE {
authEapRespExtSpecific OCTET STRING
}
authEapRespExtSpecific OBJECT-TYPE
SYNTAX OCTET STRING
STATUS current
DESCRIPTION
"Opaque EAP Response octet string."
::= { authEapRespExtEntry 1 }
--
-- conformance section tbd
--
END