Sh3ll
OdayForums


Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory :  /usr/share/pibs/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Current File : //usr/share/pibs/ACCESSBIND-PIB-orig
   ACCESSBIND-PIB PIB-DEFINITIONS ::= BEGIN  
     
   IMPORTS  
       Unsigned32, Integer32, MODULE-IDENTITY,  
       MODULE-COMPLIANCE, OBJECT-TYPE, OBJECT-GROUP, pib  
               FROM COPS-PR-SPPI  
       InstanceId, Prid  
               FROM COPS-PR-SPPI-TC   
       RoleCombination, PrcIdentifier   
               FROM FRAMEWORK-ROLE-PIB  
       InetAddress, InetAddressType  
               FROM INET-ADDRESS-MIB  
       TruthValue, PhysAddress  
               FROM SNMPv2-TC;             
     
   accessBindPib  MODULE-IDENTITY  
       SUBJECT-CATEGORIES { all }  
       LAST-UPDATED "200107101600Z"             
       ORGANIZATION "IETF RAP WG"  
       CONTACT-INFO "  

                     Walter Weiss 
                     Ellacoya Networks 
                     7 Henry Clay Drive 
                     Merrimack, NH 03054 
                     Phone: 603-879-7364 
                     E-mail: wweiss@ellacoya.com  
                   "  
       DESCRIPTION  
               "A PIB module containing the set of classes to bind  
               authorization and authentication to COPS 
               Provisioning "  
     
       ::= { pib xxx }    -- xxx to be assigned by IANA 
     
 
   --  
   -- The branch OIDs in the AccessBind PIB  
   --  
     
   capabilityClasses OBJECT IDENTIFIER ::= { accessBindPib 1 } 
   sessionClasses OBJECT IDENTIFIER ::= { accessBindPib 2 }  
   accessorClasses OBJECT IDENTIFIER ::= { accessBindPib 3 }  
   contextClasses OBJECT IDENTIFIER ::= { accessBindPib 4 }  
   authClasses OBJECT IDENTIFIER ::= { accessBindPib 5 }  
 
 
   --  
   -- Session Table  
   --  
 
   sessionTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF SessionEntry  
       PIB-ACCESS     install-notify   
       STATUS         current  
       DESCRIPTION  
           "An instance of this class is created by the PEP and sent   
            to the PDP. The PDP will fill in the sessionStatus field   
            and send the instance back when sending a decision."  
     
       ::= { sessionClasses 1 }  
     
   sessionEntry OBJECT-TYPE  
       SYNTAX         SessionEntry  
       STATUS         current  
       DESCRIPTION  
           "An instance of the sessionTable PRC."  
     
       PIB-INDEX { sessionId }  
       UNIQUENESS { }   
     
       ::= { sessionTable 1 }  
     
   SessionEntry ::= SEQUENCE {  

           sessionId                  InstanceId,  
           sessionStatus              INTEGER,  
           sessionRealm               OCTET STRING,  
           sessionUsername            OCTET STRING,  
           sessionDataPath            Prid,  
           sessionBinding             ReferenceId,  
           sessionAccessor            ReferenceId  
   }  
  
   sessionId  OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of this  
           provisioning class."  
     
       ::= { sessionEntry 1 }  
     
     
   sessionStatus OBJECT-TYPE  
       SYNTAX         INTEGER { 
                                            Pending(0), 
                                            Enabled(1), 
                                            Disabled(2) 
                                        } 
       STATUS         current  
       DESCRIPTION  
           "This attribute is set by the PDP. Set to true(1) if the   
           PDP has authorized the session, else set to false(2)." 
     
       ::= { sessionEntry 2 }  
 
   sessionRealm OBJECT-TYPE  
       SYNTAX         OCTET STRING  
       STATUS         current  
       DESCRIPTION  
           "Realm name in which the client is requesting  
           access (sometimes referred to as a domain name." 
     
       ::= { sessionEntry 3 }  
     
   sessionUsername OBJECT-TYPE  
       SYNTAX         OCTET STRING  
       STATUS         current  
       DESCRIPTION  
           "Unique user name to identify the client requesting  
           access."  
     
       ::= { sessionEntry 4 }  
     
   sessionDataPath OBJECT-TYPE  
       SYNTAX         Prid 
       STATUS         current  

       DESCRIPTION  
           "This attribute references the first functional data path  
           element to process data flow for this session. It is  
           first assigned by the PEP with the  
           accessorElementDefaultSessionDataPath in the  
           accessorElement and may optionally be reassigned by the 
           PDP." 
     
       ::= { sessionEntry 5 }  
   
     
   sessionBinding  OBJECT-TYPE  
       SYNTAX         ReferenceId  
       PIB-REFERENCES { sessionEntry } 
       STATUS         current  
       DESCRIPTION  
           "This attribute allows a PEP to indicate to the PDP that  
           this session was generated downstream on the data path  
           from a session for which an PEP has previously generated  
           an authorization request. This allows the PDP to  
           reference additional knowledge acquired from the previous  
           session such as the credentials or interface data. "  
     
       ::= { sessionEntry 6 }  
     
     
   sessionAccessor OBJECT-TYPE  
       SYNTAX         ReferenceId 
       PIB-REFERENCES { accessorEntry }    
       STATUS         current  
       DESCRIPTION  
           "This attribute references the instance of the previously  
            provisioned Accessor that resulted in this PEP Access  
            Request."  
     
       ::= { sessionEntry 7 }  

 
   -- 
   -- Accessor Table 
   -- 
 
   accessorTable OBJECT-TYPE   
     SYNTAX          SEQUENCE OF AccessorEntry 
     PIB-ACCESS      install   
     STATUS          current   
     DESCRIPTION   
           "The AccessorTable identifies when the PEP should send an  
           access or authentication request to the PDP. As a  
           result of this request, a new session may be started.  
           Hence, the AccessorTable can be said to create or remove  
           SessionTable entries. "  
 

     ::= { accessorClasses 1 }   
 
   accessorEntry OBJECT-TYPE   
     SYNTAX  AccessorEntry 
     STATUS  current   
     DESCRIPTION   
          " An instance of this class defines the circumstances for  
          generating an access request, and provides the means for  
          specifying the contents of the PEP Access Request."   
     PIB-INDEX { accessorId } 
     UNIQUENESS {    accessorRequestAuth, 
                     accessorAccElmRef, 
                     accessorAuthProtocol, 
                     accessorAuthContext, 
                     accessorDefaultDataPath 
                } 
 
     ::= { accessorTable 1}   
 
   AccessorEntry::= SEQUENCE {   
     accessorId                      InstanceId,   
     accessorRequestAuth             TruthValue, 
     accessorAccElmRef               ReferenceId, 
     accessorAuthProtocol            TagReferenceId, 
     accessorAuthContext             TagReferenceId, 
     accessorDefaultDataPath         Prid 
   }   
 
   accessorId OBJECT-TYPE  
     SYNTAX    InstanceId     
     STATUS        current  
     DESCRIPTION  
          " An arbitrary integer index that uniquely identifies  
          an instance of the accessorTable class."  
         
      ::= { accessorEntry 1} 
 
   accessorRequestAuth OBJECT-TYPE  
     SYNTAX        TruthValue 
     STATUS        current  
     DESCRIPTION  
          "Indicates whether or not authentication is required for 
          this session. TRUE indicates that authorization is 
          required."  
 
        ::= { accessorEntry 2} 
 
   accessorAccElmRef OBJECT-TYPE  
     SYNTAX        ReferenceId 
     PIB-REFERENCES { accessorElementEntry } 
     STATUS        current  
     DESCRIPTION  
          "A reference to an AccessorElementTable instance which  

          determines the scope (criteria for generating a new  
          request) and interim forwarding behavior."  
 
        ::= { accessorEntry 3} 
 
   accessorAuthProtocol OBJECT-TYPE  
     SYNTAX        TagReferenceId 
     PIB-TAG       { accessorAuthProtocolGroup } 
     STATUS        current  
     DESCRIPTION  
          "Identifies a list of accessorAuthProtocolTable entries  
          associated with this accessor instance."  
 
        ::= { accessorEntry 4} 
 
   accessorAuthContext OBJECT-TYPE  
     SYNTAX       TagReferenceId  
     PIB-TAG       { contextDataGroup } 
     STATUS        current  
     DESCRIPTION  
          "Identifies a list of ContextDataTable entries  
          associated with this accessor instance."  
 
        ::= { accessorEntry 5} 
 
   accessorDefaultDataPath OBJECT-TYPE  
     SYNTAX        Prid 
     STATUS        current  
     DESCRIPTION  
          "The data path for �out of scope� traffic."  
    
       ::= { accessorEntry 6} 
 
   -- 
   -- AccessorElement Table 
   -- 
 
   accessorElementTable OBJECT-TYPE   
     SYNTAX          SEQUENCE OF AccessorElementEntry 
     PIB-ACCESS      install   
     STATUS          current   
     DESCRIPTION   
           "This table defines the criteria to be used to generate  
           an access request. It also defines the interim forwarding  
           behavior pending a decision from the server."  
     ::= { accessorClasses 2 }   
 
  accessorElementEntry OBJECT-TYPE   
     SYNTAX  AccessorElementEntry 
     STATUS  current   
     DESCRIPTION   
          "An instance of this class defines request trigger  
          criteria and interim forwarding behavior for packets."   

     PIB-INDEX { accessorElementId } 
     UNIQUENESS { accessorElementScope } 
  
     ::= { accessorElementTable 1}   
 
   AccessorElementEntry::= SEQUENCE {   
     accessorElementId                      InstanceId, 
     accessorElementScope                   TagReferenceId, 
     accessorElementInterimFwdBehavior      INTEGER, 
     accessorElementDefaultSessionDataPath  Prid 
   } 
 
   accessorElementId OBJECT-TYPE  
     SYNTAX        InstanceId 
     STATUS        current  
     DESCRIPTION  
          "An arbitrary integer index that uniquely identifies an  
          instance of the accessorElementTable class."   
 
        ::= { accessorElementEntry 1} 
      
   accessorElementScope OBJECT-TYPE  
     SYNTAX        TagReferenceId 
     PIB-TAG       { accessorSessionScopeGroup } 
     STATUS        current  
     DESCRIPTION  
          "Identifies a list of AccessorSessionScopeTable instances  
          associated with an instance of this class. This list  
          defines the criteria for partitioning various portions of  
          traffic into distinct sessions."  
         
        ::= { accessorElementEntry 2} 
 
   accessorElementInterimFwdBehavior OBJECT-TYPE  
     SYNTAX INTEGER { 
                       DROP (0), 
                       FORWARD (1), 
                       QUEUE (2) 
                     } 
     STATUS        current  
     DESCRIPTION  
          "The forwarding behavior to use while awaiting a PDP  
          Access Response message."  
 
        ::= { accessorElementEntry 3} 
 
   accessorElementDefaultSessionDataPath OBJECT-TYPE  
     SYNTAX        Prid 
     STATUS        current  
     DESCRIPTION  
          "The default data path for each session while waiting for 
a  
          PDP Access Response message."  

 
        ::= { accessorElementEntry 4} 
 
-- 
-- AccessorSessionScope Table 
-- 
 
   accessorSessionScopeTable OBJECT-TYPE   
     SYNTAX          SEQUENCE OF AccessorSessionScopeEntry 
     PIB-ACCESS      install   
     STATUS          current   
     DESCRIPTION   
           "This class defines the criteria to be used for  
           partitioning various portions of traffic into distinct  
           sessions."  
 
     ::= { accessorClasses 3 }   
 
   accessorSessionScopeEntry OBJECT-TYPE   
     SYNTAX  AccessorSessionScopeEntry 
     STATUS  current   
     DESCRIPTION   
          "An instance of this class defines an individual criterion  
          to be used towards generating an access request."   
     PIB-INDEX { accessorSessionScopeId } 
     UNIQUENESS { accessorSessionScopeGroup, 
                  accessorSessionScopeScopeRef 
                } 
 
     ::= { accessorSessionScopeTable 1}   
 
   AccessorSessionScopeEntry::= SEQUENCE { 
     accessorSessionScopeId         InstanceId, 
     accessorSessionScopeGroup      TagId, 
     accessorSessionScopeFilter     Prid, 
     accessorSessionScopePrecedence INTEGER 
   } 
 
   accessorSessionScopeId    OBJECT-TYPE  
     SYNTAX        InstanceId 
     STATUS        current  
     DESCRIPTION  
          "An arbitrary integer index that uniquely identifies an  
          instance of the accessorSessionScopeTable class."  
 
        ::= { accessorSessionScopeEntry 1} 
 
   accessorSessionScopeGroup  OBJECT-TYPE  
     SYNTAX        TagId 
     STATUS        current  
     DESCRIPTION  
          "Represents the binding between the accessorElementTable  
           and the accessorSessionScope entries. A group of  

           accessorSessionScope entries constitutes the criteria for  
           partitioning various portions of traffic into distinct  
           sessions."  
 
        ::= { accessorSessionScopeEntry 2} 
     
   accessorSessionScopeFilter   OBJECT-TYPE  
     SYNTAX        Prid 
     STATUS        current  
     DESCRIPTION  
          "Pointer to a filter to be used as the criteria."  
        ::= { accessorSessionScopeEntry 3} 
 
   accessorSessionScopePrecedence OBJECT-TYPE  
     SYNTAX        INTEGER 
     STATUS        current  
     DESCRIPTION  
          "Represents the precedence of this criterion with respect  
          to other criteria within the same group. When the  
          precedence is unique, the instance represents an  
          alternative criteria (an ORing function). When the  
          precedence for two or more instances of the  
          accessorSessionScope class is the same, the attributes  
          within all the instances are treated collectively as a  
          single filter criteria."  
 
        ::= { accessorSessionScopeEntry 4} 
 
 
   --  
   -- AccessorAuthProtocol Table 
   -- 
 
 

 
   accessorAuthProtocolTable OBJECT-TYPE   
     SYNTAX          SEQUENCE OF AccessorAuthProtocolEntry 
     PIB-ACCESS      install   
     STATUS          current   
     DESCRIPTION   
           "This class lists the authentication protocols that can  
           be used for an access request originating from a  
           particular instance of the accessorTable."  
 
     ::= { accessorClasses 4 }   
 
   accessorAuthProtocolEntry OBJECT-TYPE   
     SYNTAX  AccessorAuthProtocolEntry 
     STATUS  current   
     DESCRIPTION   
          "An instance of this class describes an authentication  
          protocol that may be used for an access request. Instances  

          of this class that share the same TagId value collectively  
          constitute a list of authentication protocols that may be  
          used for a given access request"   
     PIB-INDEX { accessorAuthProtocolId } 
     UNIQUENESS { accessorAuthProtocolGroup, 
                  accessorAuthProtocolAuthMechanism 
                } 
  
     ::= { accessorAuthProtocolTable 1}   
 
   AccessorAuthProtocolEntry::= SEQUENCE { 
     accessorAuthProtocolId          InstanceId, 
     accessorAuthProtocolGroup       TagId, 
     accessorAuthProtocolAuthMechanism INTEGER 
   } 
 
   accessorAuthProtocolId    OBJECT-TYPE  
     SYNTAX        InstanceId 
     STATUS        current  
     DESCRIPTION  
          "An arbitrary integer index that uniquely identifies an  
          instance of the ContextDataTable class."  
    
     ::= { accessorAuthProtocolEntry 1} 
      
   accessorAuthProtocolGroup OBJECT-TYPE  
     SYNTAX        TagId 
     STATUS        current  
     DESCRIPTION  
          "Represents a binding between an accessorTable instance  
          and a list of accessorAuthProtocolTable instances."  
         
     ::= { accessorAuthProtocolEntry 2} 
 
   accessorAuthProtocolAuthMechanism OBJECT-TYPE  
     SYNTAX        INTEGER { 
                               PAP (0), 
                               CHAP (1), 
                               EAP-MD5(2), 
                               EAP-TLS(3) 
                             } 
     STATUS        current  
     DESCRIPTION  
          "The authentication protocol that may be used for an  
          access request."  
        ::= { accessorAuthProtocolEntry 3} 
 
 
 
 
   --  
   -- ContextData Table 
   --  

 
contextDataTable OBJECT-TYPE   
     SYNTAX          SEQUENCE OF ContextDataEntry 
     PIB-ACCESS      install   
     STATUS          current   
     DESCRIPTION   
           "This class points to the context information to be  
           included with an access request."  
 
     ::= { contextClasses 1 }   
 
  contextDataEntry OBJECT-TYPE   
     SYNTAX  ContextDataEntry 
     STATUS  current   
     DESCRIPTION   
          "An instance of this class contains the type description  
          (COPS-PR OID) of the class which needs to be filled in by  
          the PEP and included with a PEP access request."   
     PIB-INDEX { contextDataId } 
     UNIQUENESS { } 
  
     ::= { contextDataTable 1}   
 
   ContextDataEntry::= SEQUENCE { 
     contextDataId            InstanceId, 
     contextDataGroup         TagId, 
     contextDataSessionRef    ReferenceId, 
     contextDataIfElement     PrcIdentifier, 
     contextDataEncapsulation INTEGER 
   } 
 
   contextDataId     OBJECT-TYPE  
     SYNTAX        InstanceId 
     STATUS        current  
     DESCRIPTION  
          "An arbitrary integer index that uniquely identifies an   
          instance of the contextDataTable class."  
 
        ::= { contextDataEntry 1} 
      
   contextDataGroup  OBJECT-TYPE  
     SYNTAX        TagId 
     STATUS        current  
     DESCRIPTION  
          "Defines the grouping of contextData instances  
          that are applicable to a given Accessor. This attribute  
          MUST NOT be specified when the instance is used in  
          Session-specific contextData Request message."  
 
        ::= { contextDataEntry 2} 
      
   contextDataSessionRef     OBJECT-TYPE  
     SYNTAX        ReferenceId 

     PIB-REFERENCES { sessionEntry } 
     STATUS        current  
     DESCRIPTION  
          "This attribute is used to specify the Session for which  
           the ContextData is being requested with a Session- 
           specific ContextData Request. This attribute MUST NOT be  
           specified when the instance of the ContextData class is  
           used in an Accessor Provisioning Decision message." 
 
        ::= { contextDataEntry 3} 
 
   contextDataIfElement      OBJECT-TYPE  
     SYNTAX        PrcIdentifier 
     STATUS        current  
     DESCRIPTION  
          "The OID of a class whose instance is to be included with  
          the PEP access request or Session-specific ContextData  
          Response."  
 
        ::= { contextDataEntry 4} 
 
   contextDataEncapsulation OBJECT-TYPE  
     SYNTAX        INTEGER 
     STATUS        current  
     DESCRIPTION  
          "This attribute allows one to distinguish between inner  
           and outer headers when there are multiple encapsulated  
           headers of the same type in a packet.  
 
           A value of: 
           0 means all headers, 
           positive number �n� means the �n�th header starting  
           from the outermost, 
           negative number �n� means the �n�th header starting from  
           the innermost."  
 
        ::= { contextDataEntry 5} 
 
 
 
   -- 
   -- Layer 3 Header Data PRC 
   -- 
 
   ctxtL3HdrTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF ctxtL3HdrEntry  
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "An instance of this class is created by the PEP and sent   
            to the PDP to provide the PDP with information it  
            requested in the ContextData PRC. The PDP uses  
            this PRC to make Authentication/Provisioning decisions."  

     
       ::= { contextClasses 2 }  
     
   ctxtL3HdrEntry OBJECT-TYPE  
       SYNTAX         CtxtL3HdrEntry 
       STATUS         current  
       DESCRIPTION  
           "An instance of the ctxtL3HdrTable PRC."  
     
       PIB-INDEX { ctxtL3HdrId }  
       UNIQUENESS { }   
     
       ::= { ctxtL3HdrTable 1 }  
     
   CtxtL3HdrEntry::= SEQUENCE {  
           ctxtL3HdrId               InstanceId,  
           ctxtL3HdrSrcAddrType        InetAddressType,  
           ctxtL3HdrSrcAddr            InetAddress,  
           ctxtL3HdrDstAddrType        InetAddressType,  
           ctxtL3HdrDstAddr            InetAddress,  
           ctxtL3HdrProtocol           Unsigned32,  
           ctxtL3HdrSrcPort            Unsigned32,  
           ctxtL3HdrDstPort            Unsigned32,  
           ctxtL3HdrDscp               Unsigned32,  
           ctxtL3HdrEcn                TruthValue,  
           ctxtL3HdrIpOpt              TruthValue,  
           ctxtL3HdrEncap              Integer32 
   }  
  
   ctxtL3HdrId  OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of this  
           provisioning class."  
     
       ::= { ctxtL3HdrEntry 1 }  
     
   ctxtL3HdrSrcAddrType OBJECT-TYPE  
       SYNTAX         InetAddressType 
       STATUS         current  
       DESCRIPTION  
           "The address type enumeration value [INETADDR] to specify   
            the type of the packet's source L3 address)." 
     
       ::= { ctxtL3HdrEntry 2 }  
     
   ctxtL3HdrSrcAddr OBJECT-TYPE  
       SYNTAX         InetAddress  
       STATUS         current  
       DESCRIPTION  
           " The packet's source L3 address."  
     

       ::= { ctxtL3HdrEntry 3 }  
     
   ctxtL3HdrDstAddrType OBJECT-TYPE  
       SYNTAX         InetAddressType 
       STATUS         current  
       DESCRIPTION  
           "The address type enumeration value [INETADDR] to specify   
            the type of the packet's destination L3 address."  
     
       ::= { ctxtL3HdrEntry 4 }  
   
     
   ctxtL3HdrDstAddr OBJECT-TYPE  
       SYNTAX         InetAddress  
       STATUS         current  
       DESCRIPTION  
           "The packet's destination L3 address."  
     
       ::= { ctxtL3HdrEntry 5 }  
     
     
   ctxtL3HdrProtocol OBJECT-TYPE  
       SYNTAX         Unsigned32 
       STATUS         current  
       DESCRIPTION  
           "The packet's protocol field."  
     
       ::= { ctxtL3HdrEntry 6 }  
  
   ctxtL3HdrSrcPort  OBJECT-TYPE  
       SYNTAX         Unsigned32 
       STATUS         current  
       DESCRIPTION  
           "This attribute binds an existing upstream session to  
           this session instance."  
     
       ::= { ctxtL3HdrEntry 7 } 
 
   ctxtL3HdrDstPort  OBJECT-TYPE  
       SYNTAX         Unsigned32 
       STATUS         current  
       DESCRIPTION  
           "This attribute binds an existing upstream session to  
           this session instance."  
     
       ::= { ctxtL3HdrEntry 8 } 
 
   ctxtL3HdrDscp  OBJECT-TYPE  
       SYNTAX         Unsigned32 
       STATUS         current  
       DESCRIPTION  
           "."  
     

       ::= { ctxtL3HdrEntry 9 } 
 
   ctxtL3HdrEcn  OBJECT-TYPE  
       SYNTAX         TruthValue  
       STATUS         current  
       DESCRIPTION  
           "PEP sets this attribute to true(1) if ECN capable."  
     
       ::= { ctxtL3HdrEntry 10 } 
 
   ctxtL3HdrIpOpt  OBJECT-TYPE  
       SYNTAX         OCTET STRING  
       STATUS         current  
       DESCRIPTION  
           "IP Options field in the packet."  
     
       ::= { ctxtL3HdrEntry 11 } 
 
   ctxtL3HdrEncap  OBJECT-TYPE  
       SYNTAX         Integer32  
       STATUS         current  
       DESCRIPTION  
           "This attribute specifies which encapsulated header is  
           being described. The sign on this value will be the same   
           as the value specified in the ContextData  
           instance that requested this header. If the original  
           ContextData instance specified a  
           ContextDataEncapsulation value of zero (meaning  
           return all headers), then all instances of this attribute  
           MUST be expressed as positive numbers.  
 
           A value of: 
         
           positive number �n� means the �n�th header starting  
           from the outermost, 
           negative number �n� means the �n�th header starting from  
           the innermost."  
     
       ::= { ctxtL3HdrEntry 12 } 
 
 
-- 
-- 802.1 Header Data PRC 
-- 
 
ctxt802HdrTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF Ctxt802HdrEntry  
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "An instance of this class is created by the PEP and sent   
            to the PDP to provide the PDP with information it  
            requested in the ContextData PRC. The PDP uses  

            this PRC to make Authorization/Provisioning decisions."  
     
       ::= { contextClasses 3 }  
     
   ctxt802HdrEntry OBJECT-TYPE  
       SYNTAX         Ctxt802HdrEntry 
       STATUS         current  
       DESCRIPTION  
           "An instance of the ctxt802HdrTable PRC."  
     
       PIB-INDEX { ctxt802HdrId }  
       UNIQUENESS { }   
     
       ::= { ctxt802HdrTable 1 }  
     
   Ctxt802HdrEntry::= SEQUENCE {  
           ctxt802HdrId               InstanceId,  
           ctxt802HdrSrcAddr          PhysAddress,  
           ctxt802HdrDstAddr          PhysAddress,  
           ctxt802HdrProtocol         Unsigned32,  
           ctxt802HdrPriority         BITS,  
           ctxt802HdrVlan             Unsigned32,  
           ctxt802HdrEncap            Integer32 
   }  
  
   ctxt802HdrId  OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of this  
           provisioning class."  
     
       ::= { ctxt802HdrEntry 1 }  
     
     
   ctxt802HdrSrcAddr OBJECT-TYPE  
       SYNTAX         PhysAddress  
       STATUS         current  
       DESCRIPTION  
           " The packet's source MAC address."  
     
       ::= { ctxt802HdrEntry 2 }    
     
   ctxt802HdrDstAddr OBJECT-TYPE  
       SYNTAX         PhysAddress 
       STATUS         current  
       DESCRIPTION  
           "The packet's destination MAC address."  
     
       ::= { ctxt802HdrEntry 3 }  
     
     
   ctxt802HdrProtocol OBJECT-TYPE  

       SYNTAX         Unsigned32 (0..'ffff'h) 
       STATUS         current  
       DESCRIPTION  
           "The L2 packet's protocol field."  
     
       ::= { ctxt802HdrEntry 4 }  
 
 
   ctxt802HdrPriority OBJECT-TYPE  
       SYNTAX         Unsigned32 (0..7) 
       STATUS         current  
       DESCRIPTION  
           "The L2 packet's priority field. This attribute is only    
           valid for packets using the 802.1q header extension."  
     
       ::= { ctxt802HdrEntry 5 }  
 
   ctxt802HdrVlan OBJECT-TYPE  
       SYNTAX         Unsigned32 (1..4094) 
       STATUS         current  
       DESCRIPTION  
           "The L2 packet's VLAN field. This attribute is only valid  
           for packets using the 802.1q header extension."  
     
       ::= { ctxt802HdrEntry 6 }  
 
   ctxt802HdrEncap OBJECT-TYPE  
       SYNTAX         Integer32 
       STATUS         current  
       DESCRIPTION  
           "This attribute specifies which encapsulated header is  
           being described. The sign on this value will be the same  
           as the value specified in the ContextData  
           instance that requested this header. If the original  
           ContextData instance specified an  
           ContextDataEncapsulation value of zero (meaning  
           return all headers), then all instances of this attribute  
           MUST be expressed as positive numbers.  
 
           A value of: 
           positive number �n� means the �n�th header starting  
           from the outermost, 
           negative number �n� means the �n�th header starting from  
           the innermost."  
     
       ::= { ctxt802HdrEntry 7 } 
 
 
   --  
   -- CtxtDialupInterface Table  
   --  
 
   ctxtDialupInterfaceTable OBJECT-TYPE  

       SYNTAX         SEQUENCE OF CtxtDialupInterfaceEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "."  
     
       ::= { contextClasses 4 }  
     
   ctxtDialupInterfaceEntry OBJECT-TYPE  
       SYNTAX         CtxtDialupInterfaceEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid of the ctxtDialupInterfaceTable PRC."  
     
       PIB-INDEX { ctxtDialupInterfaceId }  
       UNIQUENESS { }   
     
       ::= { ctxtDialupInterfaceTable 1 }  
     
   CtxtDialupInterfaceEntry::= SEQUENCE {  
           ctxtDialupInterfaceId                InstanceId,  
           ctxtDialupInterfaceNASPort           Integer32,  
           ctxtDialupInterfaceNASPortId         OCTET STRING,  
           ctxtDialupInterfaceNASPortType       INTEGER,  
           ctxtDialupInterfaceCalledStationId   OCTET STRING,  
           ctxtDialupInterfaceCallingStationId  OCTET STRING,  
           ctxtDialupInterfaceConnectInfo       OCTET STRING           
   }  
  
   ctxtDialupInterfaceId  OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of this  
           provisioning class."  
     
       ::= { ctxtDialupInterfaceEntry 1 }  
     
     
   ctxtDialupInterfaceNASPort  OBJECT-TYPE  
       SYNTAX         Integer32 
       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates the physical port number of the 
           NAS which is authenticating the user.  It is only used in 
           Access-Request packets.  Note that this is using 'port' 
           in its sense of a physical connection on the NAS, not in 
           the sense of a TCP or UDP port number." 
     
       ::= { ctxtDialupInterfaceEntry 2 }  
 
 
   ctxtDialupInterfaceNASPortId  OBJECT-TYPE  

       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "This Attribute contains a text string which identifies 
           the port of the NAS which is authenticating the user. It 
           is only used in Access-Request and Accounting-Request 
           packets.  Note that this is using 'port' in its sense of 
           a physical connection on the NAS, not in the sense of a 
           TCP or UDP port number. " 
     
       ::= { ctxtDialupInterfaceEntry 2 }  
 
   ctxtDialupInterfaceNASPortType  OBJECT-TYPE  
 SYNTAX  INTEGER { 
                        radAsync(0), 
                        radSync(1), 
                        radIsdnSync(2), 
                        radIsdnAsyncV120(3), 
                        radIsdnAsyncV110(4), 
                        radVirtual(5), 
                        radPIAFS(6), 
                        radHdlcClearChannel(7), 
                        radX25(8), 
                        radX75(9), 
                        radG3Fax(10), 
                        radSDSL(11), 
                        radAdslCAP(12), 
                        radAdslDMT(13), 
                        radIdsl(14), 
                        radEthernet(15), 
                        radXdsl(16), 
                        radCable(17), 
                        radWirelessOther(18), 
                        radWirelessIEEE80211(19) 
                } 
       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates the type of the physical port 
           of the NAS which is authenticating the user.  It can be 
           used instead of or in addition to the radNasPort (5) 
           attribute.  It is only used in Access-Request packets. 
           Either radNasPort (5) or radNasPortType or both SHOULD be 
           present in an Access-Request packet, if the NAS 
           differentiates among its ports. 
 
                A value of 'radAsync(0)' indicates Async. 
 
                A value of 'radSync(1)' indicates Sync. 
 
                A value of 'radIsdnSync(2)' indicates ISDN Sync. 
 
                A value of 'radIsdnAsyncV120(3)' indicates ISDN 
                Async V.120. 

 
                A value of 'radIsdnAsyncV110(4)' indicates ISDN 
                Async V.110. 
 
                A value of 'radVirtual(5)' indicates Virtual. 
                Virtual refers to a connection to the NAS via some 
                transport protocol, instead of through a physical 
                port. For example, if a user telnetted into a NAS to 
                authenticate himself as an Outbound-User, the 
                Access-Request might include radNasPortType = 
                Virtual as a hint to the RADIUS server that the user 
                was not on a physical port. 
 
                A value of 'radPIAFS(6)' indicates PIAFS. PIAFS is a 
                form of wireless ISDN commonly used in Japan, and 
                stands for PHS (Personal Handyphone System) Internet 
                Access Forum Standard (PIAFS). 
 
                A value of 'radHdlcClearChannel(7)' indicates HDLC 
                Clear Channel. 
 
                A value of 'radX25(8)' indicates X.25. 
 
                A value of 'radX75(9)' indicates X.75. 
 
                A value of 'radG3Fax(10)' indicates G.3 Fax. 
 
                A value of 'radSDSL(11)' indicates SDSL � Symmetric 
                DSL. 
 
                A value of 'radAdslCAP(12)' indicates ADSL-CAP - 
                Asymmetric DSL, Carrierless Amplitude Phase 
                Modulation. 
 
                A value of 'radAdslDMT(13)' indicates ADSL-DMT - 
                Asymmetric DSL, Discrete Multi-Tone. 
 
                A value of 'radIdsl(14)' indicates IDSL � ISDN 
                Digital Subscriber Line. 
 
                A value of 'radEthernet(15)' indicates Ethernet. 
 
                A value of 'radXdsl(16)' indicates xDSL - Digital 
                Subscriber Line of unknown type. 
 
                A value of 'radCable(17)' indicates Cable. 
 
                A value of 'radWirelessOther(18)' indicates Wireless 
                - Other. 
 
                A value of 'radWirelessIEEE80211(19)' indicates 
                Wireless - IEEE 802.11." 
       ::= { ctxtDialupInterfaceEntry 2 }  

 
   ctxtDialupInterfaceCalledStationId  OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "This Attribute allows the NAS to send in the Access- 
           Request packet the phone number that the user called, 
           using Dialed Number Identification (DNIS) or similar 
           technology.  Note that this may be different from the 
           phone number the call comes in on.  It is only used in 
           Access-Request packets. " 
       ::= { ctxtDialupInterfaceEntry 2 }  
 
   ctxtDialupInterfaceConnectInfo  OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "This Attribute allows the NAS to send in the Access- 
           Request packet the phone number that the call came from, 
           using Automatic Number Identification (ANI) or similar 
           technology.  It is only used in Access-Request packets." 
       ::= { ctxtDialupInterfaceEntry 2 }  
 
 
 
 
   --- 
   --- CtxtDialupInterfaceFramedProtocol Table 
   --- 
 
   ctxtDialupIfFramedProtocolTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF CtxtDialupIfFramedProtocolEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "."  
     
       ::= { contextClasses 5 }  
     
   ctxtDialupIfFramedProtocolEntry OBJECT-TYPE  
       SYNTAX         CtxtDialupIfFramedProtocolEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid of the ctxtDialupIfFramedProtocolTable PRC."  
     
       PIB-INDEX { ctxtDialupIfFramedProtocolId }  
       UNIQUENESS { }   
     
       ::= { ctxtDialupIfFramedProtocolTable 1 }  
     
   CtxtDialupInterfaceEntry::= SEQUENCE {  
           ctxtDialupIfFramedProtocolId           InstanceId,  
           ctxtDialupIfFramedProtocolProt         INTEGER,  

           ctxtDialupIfFramedProtocolMTU          Integer32,  
           ctxtDialupIfFramedProtocolCompression  INTEGER,  
           ctxtDialupIfFramedProtocolPortLimit    Unsigned32,  
           ctxtDialupIfFramedProtocolIpAddress    IpAddress,  
           ctxtDialupIfFramedProtocolIpNetmask    IpAddress 
   }  
  
   ctxtDialupIfFramedProtocolId OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of this  
           provisioning class."  
     
       ::= { ctxtDialupIfFramedProtocolEntry 1 }  
     
     
   ctxtDialupIfFramedProtocolProt  OBJECT-TYPE  
       SYNTAX  INTEGER { 
                        radPPP(1), 
                        radSLIP(2), 
                        radARAP(3), 
                        radGandalf(4), 
                        radXylogics(5), 
                        radX75Synchronous(6) 
                } 
       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates the framing to be used for 
           framed access. It MAY be used in both Access-Request and 
           Access-Accept packets. 
 
                A value of 'radPPP(1)' represents PPP. 
 
                A value of 'radSLIP(2)' represents SLIP. 
 
                A value of 'radARAP(3)' represents AppleTalk Remote 
                Access Protocol (ARAP). 
 
                A value of 'radGandalf(4)' represents Gandalf 
                proprietary SingleLink/MultiLink protocol. 
 
                A value of 'radXylogics(5)' represents Xylogics 
                proprietary IPX/SLIP. 
 
                A value of 'radX75Synchronous(6)' represents X.75 
                Synchronous." 
     
       ::= { ctxtDialupIfFramedProtocolEntry 2 }  
 
 
   ctxtDialupIfFramedProtocolMTU  OBJECT-TYPE  
       SYNTAX         Integer32 

       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates the Maximum Transmission Unit 
           to be configured for the user, when it is not negotiated 
           by some other means (such as PPP).  It MAY be used in 
           Access-Accept packets.  It MAY be used in an Access- 
           Request packet as a hint by the NAS to the server that it 
           would prefer that value, but the server is not required 
           to honor the hint." 
     
       ::= { ctxtDialupIfFramedProtocolEntry 3 }  
 
   ctxtDialupIfFramedProtocolCompression  OBJECT-TYPE  
        SYNTAX  INTEGER { 
                        radNone(0), 
                        radVJ(1), 
                        radIPXheader(2), 
                        radStacLZS(3) 
                } 
       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates a compression protocol to be 
           used for the link.  It MAY be used in Access-Accept 
           packets.  It MAY be used in an Access-Request packet as a 
           hint to the server that the NAS would prefer to use that 
           compression, but the server is not required to honor the 
           hint. 
 
           More than one compression protocol Attribute MAY be sent. 
           It is the responsibility of the NAS to apply the proper 
           compression protocol to appropriate link traffic. 
 
                A value of 'radNone(0)' indicates None. 
 
                A value of 'radVJ(1)' indicates VJ TCP/IP header 
                compression. 
 
                A value of 'radIPXheader(2)' indicates IPX header 
                compression. 
 
                A value of 'radStacLZS(3)' indicates Stac-LZS 
                compression." 
     
       ::= { ctxtDialupIfFramedProtocolEntry 4 }  
 
 
   ctxtDialupIfFramedProtocolPortLimit  OBJECT-TYPE  
       SYNTAX         Integer32 
       STATUS         current  
       DESCRIPTION  
           "This Attribute sets the maximum number of ports to be 
           provided to the user by the NAS.  This Attribute MAY be 
           sent by the server to the client in an Access-Accept 

           packet.  It is intended for use in conjunction with 
           Multilink PPP [10] or similar uses.  It MAY also be sent 
           by the NAS to the server as a hint that that many ports 
           are desired for use, but the server is not required to 
           honor the hint." 
     
       ::= { ctxtDialupIfFramedProtocolEntry 5 }  
 
   ctxtDialupIfFramedProtocolIpAddress  OBJECT-TYPE  
       SYNTAX         IpAddress 
       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates the address to be configured 
           for the user.  It MAY be used in Access-Accept packets. 
           It MAY be used in an Access-Request packet as a hint by 
           the NAS to the server that it would prefer that address, 
           but the server is not required to honor the hint." 
     
       ::= { ctxtDialupIfFramedProtocolEntry 6 } 
 
 
   ctxtDialupIfFramedProtocolIpNetmask  OBJECT-TYPE  
       SYNTAX         IpAddress 
       STATUS         current  
       DESCRIPTION  
           "This Attribute indicates the IP netmask to be configured 
           for the user when the user is a router to a network.  It 
           MAY be used in Access-Accept packets.  It MAY be used in 
           an Access-Request packet as a hint by the NAS to the 
           server that it would prefer that netmask, but the server 
           is not required to honor the hint." 
     
       ::= { ctxtDialupIfFramedProtocolEntry 7 } 
 
 
    
    
   --- 
   --- CtxtDialupIfLoginService Table 
   --- 
 
   ctxtDialupIfLoginServiceTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF CtxtDialupIfLoginServiceEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "Base class."  
     
       ::= { contextClasses 6 }  
     
   ctxtDialupIfLoginServiceEntry OBJECT-TYPE  
       SYNTAX         CtxtDialupIfLoginServiceEntry 
       STATUS         current  

       DESCRIPTION  
           "Entry oid of the ctxtDialupIfLoginServiceTable PRC."  
     
       PIB-INDEX { ctxtDialupIfLoginServiceId }  
       UNIQUENESS { }   
     
       ::= { ctxtDialupIfLoginServiceTable 1 }  
     
 
 
   CtxtDialupIfLoginServiceEntry::= SEQUENCE {  
           ctxtDialupIfLoginServiceId       InstanceId,  
           ctxtDialupIfLoginIpHost          IpAddress 
   }  
  
   ctxtDialupIfLoginServiceId OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of this  
           provisioning class."  
     
       ::= { ctxtDialupIfLoginServiceEntry 1 }  
     
     
   ctxtDialupIfLoginIpHost OBJECT-TYPE  
       SYNTAX         IpAddress 
       STATUS         current  
       DESCRIPTION  
           "." 
     
       ::= { ctxtDialupIfLoginServiceEntry 2 }  
 
    
    
   --- 
   --- CtxtDialupIfLoginLat Table (Extends CtxtDialupIfLoginService) 
   --- 
 
   ctxtDialupIfLoginLatTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF CtxtDialupIfLoginLatEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "Extended class."  
     
       ::= { contextClasses 7 }  
     
   ctxtDialupIfLoginLatEntry OBJECT-TYPE  
       SYNTAX         CtxtDialupIfLoginLatEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid of the ctxtDialupIfLoginLatTable PRC."  

     
          EXTENDS { ctxtDialupIfLoginServiceEntry } 
       UNIQUENESS { }   
     
       ::= { ctxtDialupIfLoginLatTable 1 }  
     
 
   CtxtDialupIfLoginLatEntry::= SEQUENCE {  
           ctxtDialupIfLoginLatService   OCTET STRING, 
           ctxtDialupIfLoginLatNode      OCTET STRING, 
           ctxtDialupIfLoginLatGroup     OCTET STRING, 
           ctxtDialupIfLoginLatPort      OCTET STRING 
   }  
      
     
   ctxtDialupIfLoginLatService  OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "." 
     
       ::= { ctxtDialupIfLoginLatEntry 1 }  
 
   ctxtDialupIfLoginLatNode  OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "." 
     
       ::= { ctxtDialupIfLoginLatEntry 2 }  
 
   ctxtDialupIfLoginLatGroup  OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "." 
     
       ::= { ctxtDialupIfLoginLatEntry 3 }  
 
   ctxtDialupIfLoginLatPort  OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "." 
     
       ::= { ctxtDialupIfLoginLatEntry 4 }  
 
 
   --  
   -- Authentication Extension Tables  
   --  
 
   --  

   -- AuthExtensions Base Table  
   --  
 
   authExtTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF AuthExtEntry  
       PIB-ACCESS     install-notify   
       STATUS         current  
       DESCRIPTION  
           "This is an abstract PRC. This PRC can be extended by  
           authentication PRCs that contain attributes specific to  
           that authentication protocol. An instance of the extended    
           class is created by the PEP and sent to the PDP. The PDP  
           may send information back to the PEP or may uses the  
           information to authenticate the PEP's access request. This  
           PRC itself should not be instantiated. 
 
           This is a �transient� class. Its instances are temporary  
           and are deleted by the PEP after a certain time/event.  
           Thus it must not be referred to by the server."  
     
       ::= { authClasses 1 }  
     
   authExtEntry OBJECT-TYPE  
       SYNTAX         AuthExtEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid for the AuthExtTable PRC."  
     
       PIB-INDEX { authExtId }  
       UNIQUENESS { }   
     
       ::= { authExtTable 1 }  
     
   AuthExtEntry ::= SEQUENCE {  
           authExtId                InstanceId,  
           authExtSession           ReferenceId  
   }  
  
   authExtId  OBJECT-TYPE  
       SYNTAX         InstanceId  
       STATUS         current  
       DESCRIPTION  
           "An index to uniquely identify an instance of the  
            entended provisioning class."  
     
       ::= { authExtEntry 1 }  
     
   authExtSession  OBJECT-TYPE  
       SYNTAX         ReferenceId 
       PIB-REFERENCES { sessionEntry } 
       STATUS         current  
       DESCRIPTION  
           "This attribute is set by the PEP to reference the  

            session for which authentication is being requested." 
     
       ::= { authExtEntry 2 }  
 
 
 
 
 
 
   --  
   -- AuthChapExt Table 
   --  
 
   authChapExtTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF AuthChapExtEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "This is a concrete PRC used to contain CHAP  
           authentication fields. This PRC extends the base PRC  
           authExtEntry." 
     
       ::= { authClasses 2 }  
     
   authChapExtEntry OBJECT-TYPE  
       SYNTAX         AuthChapExtEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid for the AuthChapExtTable PRC. InstanceId's for  
            this extended PRC are assigned by the base PRC [SPPI]."  
     
       EXTENDS { authExtEntry }  
       UNIQUENESS { }   
     
       ::= { authChapExtTable 1 }  
     
   AuthChapExtEntry::= SEQUENCE {  
           authChapExtId        Unsigned32, 
           authChapExtChal      OCTET STRING, 
           authChapExtResp      OCTET STRING  
   }  
  
   authChapExtId OBJECT-TYPE  
       SYNTAX         Unsigned32 
       STATUS         current  
       DESCRIPTION  
           "CHAP Id field."  
     
       ::= { authChapExtEntry 1 }  
 
   authChapExtChal OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  

       DESCRIPTION  
           "CHAP Challenge octet string. The challenge is generated  
           by the PEP."  
     
       ::= { authChapExtEntry 2 }  
     
   authChapExtResp OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "CHAP Challenge Response octet string. The challenge  
           response is sent to the PDP along with the challenge." 
     
       ::= { authChapExtEntry 3 }  
 
 
   --  
   -- AuthPapExt Table 
   --  
 
   authPapExtTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF AuthPapExtEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "This is a concrete PRC used to contain PAP  
           authentication fields. This PRC extends the base PRC  
           authExtEntry." 
     
       ::= { authClasses 3 }  
     
   authPapExtEntry OBJECT-TYPE  
       SYNTAX         AuthPapExtEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid for the AuthPapExtTable PRC. InstanceId's for  
            this extended PRC are assigned by the base PRC [SPPI]."  
     
       EXTENDS { authExtEntry }  
       UNIQUENESS { }   
     
       ::= { authPapExtTable 1 }  
     
   AuthPapExtEntry::= SEQUENCE {  
           authPapExtPwd      OCTET STRING 
   }  
  
   authPapExtPwd OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "PAP password octet string."  
     

       ::= { authPapExtEntry 1 }  
     
 
   --  
   -- AuthEapReqExt Table 
   --  
 
   authEapReqExtTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF AuthEapReqExtEntry 
       PIB-ACCESS     notify   
       STATUS         current  
       DESCRIPTION  
           "This is a concrete PRC used to contain EAP  
           authentication fields. This PRC extends the base PRC  
           authExtEntry. The PEP uses this PRC to send EAP messages  
           to the PDP." 
     
       ::= { authClasses 4 }  
     
   authEapReqExtEntry OBJECT-TYPE  
       SYNTAX         AuthEapReqExtEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid for the authEapReqExtTable PRC. InstanceId's  
           for this extended PRC are assigned by the base PRC  
           [SPPI]."  
     
       EXTENDS { authExtEntry }  
       UNIQUENESS { }   
     
       ::= { authEapReqExtTable 1 }  
     
   AuthEapReqExtEntry::= SEQUENCE {  
           authEapReqExtSpecific    OCTET STRING 
   }  
  
   authEapReqExtSpecific OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "Opaque EAP Request octet string."  
     
       ::= { authEapReqExtEntry 1 }  
     
 
   --  
   -- AuthEapRespExt Table 
   --  
 
   authEapRespExtTable OBJECT-TYPE  
       SYNTAX         SEQUENCE OF AuthEapRespExtEntry 
       PIB-ACCESS     install   
       STATUS         current  

       DESCRIPTION  
           "This is a concrete PRC used to contain EAP  
           authentication fields. This PRC extends the base PRC  
           authExtEntry. The PDP responds using this PRC for EAP  
           exchanges." 
     
       ::= { authClasses 5 }  
     
   authEapRespExtEntry OBJECT-TYPE  
       SYNTAX         AuthEapRespExtEntry 
       STATUS         current  
       DESCRIPTION  
           "Entry oid for the authEapRespExtTable PRC. InstanceId's  
           for this extended PRC are assigned by the base PRC  
           [SPPI]."  
     
       EXTENDS { authExtEntry }  
       UNIQUENESS { }   
     
       ::= { authEapRespExtTable 1 }  
     
   AuthEapRespExtEntry::= SEQUENCE {  
           authEapRespExtSpecific    OCTET STRING 
   }  
  
   authEapRespExtSpecific OBJECT-TYPE  
       SYNTAX         OCTET STRING 
       STATUS         current  
       DESCRIPTION  
           "Opaque EAP Response octet string."  
     
       ::= { authEapRespExtEntry 1 }  
 
 
-- 
-- conformance section tbd 
-- 
 
END 

ZeroDay Forums Mini