Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory : /usr/share/pibs/
|
Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/pibs/ |
IP-TE-PIB PIB-DEFINITIONS ::= BEGIN
IMPORTS
ibrpib
FROM TUBS-SMI
Unsigned32, Integer32, MODULE-IDENTITY,
MODULE-COMPLIANCE, OBJECT-TYPE, OBJECT-GROUP,
TEXTUAL-CONVENTION
FROM COPS-PR-SPPI
InstanceId, ReferenceId, Prid, TagId
FROM COPS-PR-SPPI-TC
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
Count
FROM ACCOUNTING-FRAMEWORK-PIB
TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
RoleCombination
FROM FRAMEWORK-TC-PIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
ipTePib MODULE-IDENTITY
SUBJECT-CATEGORIES { all } -- IP TE client-type to be
-- assigned by IANA
LAST-UPDATED "200106180900Z"
ORGANIZATION "France Telecom"
CONTACT-INFO "
Christian Jacquenet
France Telecom R & D
42, rue des Coutures
BP 6243
14066 CAEN CEDEX 04
France
Phone: +33 2 31 75 94 28
E-Mail: christian.jacquenet@francetelecom.com"
DESCRIPTION
"The PIB module containing a set of policy rule classes
that describe IP Traffic Engineering policies to be
enforced within and between domains."
REVISION "200111061600Z"
DESCRIPTION
"Initial version."
::= { ibrpib 23 } -- tbd to be assigned by IANA
ipTeFwdClasses OBJECT IDENTIFIER ::= { ipTePib 1 }
ipTeMetricsClasses OBJECT IDENTIFIER ::= { ipTePib 2 }
ipTeStatsClasses OBJECT IDENTIFIER ::= { ipTePib 3 }
--
-- Forwarding classes. The information contained in these classes
-- is meant to provide a detailed description of the traffic
-- engineered routes. One table has been specified so far, but there
-- is room for depicting specific kinds of routes, like MPLS LSP
-- paths, for example.
--
--
--
-- The ipTeRouteTable
--
ipTeRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpTeRouteEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"This table describes the traffic engineered routes
that are installed in the forwarding tables of the
routers."
::= { ipTeFwdClasses 1 }
ipTeRouteEntry OBJECT-TYPE
SYNTAX IpTeRouteEntry
STATUS current
DESCRIPTION
"A particular traffic engineered route to a particular
destination."
PIB-INDEX { ipTeRoutePrid }
UNIQUENESS { ipTeRouteDest,
ipTeRouteMask,
ipTeRoutePhbId,
ipTeRouteNextHopAddress,
ipTeRouteNextHopMask }
::= { ipTeRouteTable 1 }
IpTeRouteEntry ::= SEQUENCE {
ipTeRoutePrid InstanceId,
ipTeRouteDestAddrType InetAddressType,
ipTeRouteDest InetAddress,
ipTeRouteMask Unsigned32,
ipTeRouteNextHopAddrType InetAddressType,
ipTeRouteNextHopAddress InetAddress,
ipTeRouteNextHopMask Unsigned32,
ipTeRoutePhbId Integer32,
ipTeRouteOrigin Integer32,
ipTeRouteIfIndex Unsigned32
}
ipTeRoutePrid OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An integer index that uniquely identifies this route
entry among all the route entries."
::= { ipTeRouteEntry 1 }
ipTeRouteDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value ([16]) used to
specify the type of a route's destination IP address."
::= { ipTeRouteEntry 2 }
ipTeRouteDest OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The IP address to match against the packet's
destination address."
::= { ipTeRouteEntry 3 }
ipTeRouteMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the
destination IP address. Masks are constructed by
setting bits in sequence from the most-significant bit
downwards for ipTeRouteMask bits length. All other bits
in the mask, up to the number needed to fill the length
of the address ipTeRouteDest are cleared to zero. A
zero bit in the mask then means that the corresponding
bit in the address always matches."
::= { ipTeRouteEntry 4 }
ipTeRouteNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value used to specify the
type of the next hop's IP address."
::= { ipTeRouteEntry 5 }
ipTeRouteNextHopAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"On remote routes, the address of the next router en
route; Otherwise, 0.0.0.0."
::= { ipTeRouteEntry 6 }
ipTeRouteNextHopMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the
next hop's IP address. Masks are constructed by setting
bits in sequence from the most-significant bit
downwards for ipTeRouteNextHopMask bits length. All
other bits in the mask, up to the number needed to fill
the length of the address ipTeRouteNextHop are cleared
to zero. A zero bit in the mask then means that the
corresponding bit in the address always matches."
::= { ipTeRouteEntry 7 }
ipTeRoutePhbId OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
STATUS current
DESCRIPTION
"The binary encoding that uniquely identifies a Per Hop
Behaviour (PHB, [17]) or a set of PHBs associated to
the DiffServ Code Point (DSCP, [15]) marking of the IP
datagrams that will be conveyed along this traffic
engineered route. A value of -1 indicates that a
specific PHB ID value has not been defined, and thus,
all PHB ID values are considered a match."
::= { ipTeRouteEntry 8 }
ipTeRouteOrigin OBJECT-TYPE
SYNTAX INTEGER {
ospf (0),
is-is (1),
bgp (2),
static (3),
other (4)
}
STATUS current
DESCRIPTION
"The value indicates the origin of the route. Either
the route has been computed by OSPF, by IS-IS,
announced by BGP4, is static, or else."
::= { ipTeRouteEntry 9 }
ipTeRouteIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route is
accessible."
::= { ipTeRouteEntry 10 }
--
--
-- Traffic engineering metrics classes.
--
-- The information stored in the following tables is meant to provide
-- the description of the metric values that will be taken into
-- account by intra- and inter-domain routing protocols for the
-- computation and the selection of traffic-engineered routes. So
-- far, two tables have been identified: one which is based upon the
-- traffic engineering extensions of OSPF, the other which is based
-- upon the contents of a specific BGP4 attribute. Next versions of
-- the draft will include IS-IS specific information, as well as
-- extensions of the BGP4-specific provisioning information for the
-- "basic" enforcement of a BGP4 routing policy.
--
--
--
-- The ospfTeMetricsTable
--
ospfTeMetricsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfTeMetricsEntry
PIB-ACCESS install-notify
STATUS current
DESCRIPTION
"This class describes the link and traffic engineering
metrics that will be used by OSPF for TE route
calculation purposes."
::= { ipTeMetricsClasses 1 }
ospfTeMetricsEntry OBJECT-TYPE
SYNTAX OspfTeMetricsEntry
STATUS current
DESCRIPTION
"The collection of OSPF metrics assigned to the router
on a per interface and per DSCP basis."
PIB-INDEX { ospfTeMetricsPrid }
UNIQUENESS { ospfTeMetricsIfMetricValue,
ospfTeMetricsDscpValue,
ospfTeMetricsSubTlvLinkType,
ospfTeMetricsSubTlvLinkId,
ospfTeMetricsSubTlvLocalIfAddress,
ospfTeMetricsSubTlvRemoteIfAddress,
ospfTeMetricsSubTlvTeMetric,
ospfTeMetricsSubTlvMaxBandwidth,
ospfTeMetricsSubTlvMaxRsvBandwidth,
ospfTeMetricsSubTlvUnrsvBandwidth,
ospfTeMetricsIfIndex }
::= { ospfTeMetricsTable 1 }
OspfTeMetricsEntry ::= SEQUENCE {
ospfTeMetricsPrid InstanceId,
ospfTeMetricsIfMetricValue Unsigned32,
ospfTeMetricsDscpValue Integer32,
ospfTeMetricsTopTlvAddressType InetAddressType,
ospfTeMetricsTopTlvRouterAddress InetAddress,
ospfTeMetricsTopTlvRouterAddrMask Unsigned32,
ospfTeMetricsSubTlvLinkType INTEGER,
ospfTeMetricsSubTlvLinkIdAddressType InetAddressType,
ospfTeMetricsSubTlvLinkId InetAddress,
ospfTeMetricsSubTlvLinkIdMask Unsigned32,
ospfTeMetricsSubTlvLocalIfAddressType InetAddressType,
ospfTeMetricsSubTlvLocalIfAddress InetAddress,
ospfTeMetricsSubTlvLocalIfAddrMask Unsigned32,
ospfTeMetricsSubTlvRemoteIfAddressType InetAddressType,
ospfTeMetricsSubTlvRemoteIfAddress InetAddress,
ospfTeMetricsSubTlvRemoteIfAddrMask Unsigned32,
ospfTeMetricsSubTlvTeMetric Unsigned32,
ospfTeMetricsSubTlvMaxBandwidth Unsigned32,
ospfTeMetricsSubTlvMaxRsvBandwidth Unsigned32,
ospfTeMetricsSubTlvUnrsvBandwidth Unsigned32,
ospfTeMetricsIfIndex Unsigned32
}
ospfTeMetricsPrid OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An integer index that uniquely identifies this instance of
the ospfTeMetrics class."
::= { ospfTeMetricsEntry 1 }
ospfTeMetricsIfMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
STATUS current
DESCRIPTION
"The link metric assigned on a per-DSCP and per-interface
basis, as defined in this instance of the
ospfTeMetricsTable."
::= { ospfTeMetricsEntry 2 }
ospfTeMetricsDscpValue OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
STATUS current
DESCRIPTION
"The DSCP value associated to the link metric value, as
defined in the ospfTeMetricsIfMetricValue object. A value of
-1 indicates that a specific DSCP value has not been defined
and thus all DSCP values are considered a match."
::= { ospfTeMetricsEntry 3 }
ospfTeMetricsTopTlvAddressType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value used to specify the IP
address of the advertising router. This IP address is always
reachable, and is typically implemented as a 'loopback'
address."
::= { ospfTeMetricsEntry 4 }
ospfTeMetricsTopTlvRouterAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The IP address (typically a 'loopback' address) of the
advertising router."
::= { ospfTeMetricsEntry 5 }
ospfTeMetricsTopTlvRouterAddrMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the
advertising router's IP address. Masks are constructed by
setting bits in sequence from the most-significant bit
downwards for ospfTeMetricsTopTlvRouterAddrMask bits length.
All other bits in the mask, up to the number needed to fill
the length of the address ospfTeMetricsTopTlvRouterAddress
are cleared to zero. A zero bit in the mask then means that
the corresponding bit in the address always matches."
::= { ospfTeMetricsEntry 6 }
ospfTeMetricsSubTlvLinkType OBJECT-TYPE
SYNTAX INTEGER {
point-to-Point (1),
multiaccess (2)
}
STATUS current
DESCRIPTION
"The type of the link, either point-to-point or multi-
access, as defined in [8]."
::= { ospfTeMetricsEntry 7 }
ospfTeMetricsSubTlvLinkIdAddressType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value used to identify the
other end of the link, described as an IP address."
::= { ospfTeMetricsEntry 8 }
ospfTeMetricsSubTlvLinkId OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The identification of the other end of the link, described
as an IP address."
::= { ospfTeMetricsEntry 9 }
ospfTeMetricsSubTlvLinkIdMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the
other end of the link, described as an IP address. Masks
are constructed by setting bits in sequence from the most-
significant bit downwards for ospfTeMetricsSubTlvLinkMask
bits length. All other bits in the mask, up to the number
needed to fill the length of the address
ospfTeMetricsSubTlvLinkId are cleared to zero. A zero bit
in the mask then means that the corresponding bit in the
address always matches."
::= { ospfTeMetricsEntry 10 }
ospfTeMetricsSubTlvLocalIfAddressType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value used to specify the IP
address of the interface corresponding to this instance of
the ospfTeMetricsSubTlvLinkType object."
::= { ospfTeMetricsEntry 11 }
ospfTeMetricsSubTlvLocalIfAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"Specifies the IP address of the interface of the
advertising router which is connected to the link described
as an instance of the ospfTeMetricsSubTlvLinkType object."
::= { ospfTeMetricsEntry 12 }
ospfTeMetricsSubTlvLocalIfAddrMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the IP
address of the interface corresponding to this instance of
the ospfTeMetricsSubTlvLinkType object. Masks are
constructed by setting bits in sequence from the most-
significant bit downwards for
ospfTeMetricsSubTlvLocalIfAddrMask bits length. All other
bits in the mask, up to the number needed to fill the length
of the address ospfTeMetricsSubTlvLocalIfAddress are cleared
to zero. A zero bit in the mask then means that the
corresponding bit in the address always matches."
::= { ospfTeMetricsEntry 13 }
ospfTeMetricsSubTlvRemoteIfAddressType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value used to specify the IP
address(es) of the neighbour's interface corresponding to
this instance of the ospfTeMetricsSubTlvLinkType object."
::= { ospfTeMetricsEntry 14 }
ospfTeMetricsSubTlvRemoteIfAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"Specifies the IP address of the neighbour's interface that
is attached to this instance of the
ospfTeMetricsSubTlvLinkType object."
::= { ospfTeMetricsEntry 15 }
ospfTeMetricsSubTlvRemoteIfAddrMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the IP
address of the neighbor's interface corresponding to this
instance of the ospfTeMetricsSubTlvLinkType object. Masks
are constructed by setting bits in sequence from the most-
significant bit downwards for
ospfTeMetricSubTlvRemoteIfAddrMaskbits length. All other
bits in the mask, up to the number needed to fill the length
of the address ospfTeMetricSubTlvRemoteIfAddress are cleared
to zero. A zero bit in the mask then means that the
corresponding bit in the address always matches."
::= { ospfTeMetricsEntry 16 }
ospfTeMetricsSubTlvTeMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
STATUS current
DESCRIPTION
"The link metric that has been assigned for traffic
engineering purposes. This metric may be different from the
ospfTeMetricsLinkMetricValue object of the ospfTeMetrics
class."
::= { ospfTeMetricsEntry 17 }
ospfTeMetricsSubTlvMaxBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes per second"
STATUS current
DESCRIPTION
"Specifies the maximum bandwidth that can be used on this
instance of the ospfTeMetricsSubTlvLinkType object in this
direction (from the advertising router), expressed in bytes
per second."
::= { ospfTeMetricsEntry 18 }
ospfTeMetricsSubTlvMaxRsvBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes per second"
STATUS current
DESCRIPTION
"Specifies the maximum bandwidth that may be reserved on
this instance of the ospfTeMetricsSubTlvLinkType object in
this direction (from the advertising router), expressed in
bytes per second."
::= { ospfTeMetricsEntry 19 }
ospfTeMetricsSubTlvUnrsvBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes per second"
STATUS current
DESCRIPTION
"Specifies the amount of bandwidth that has not been
reserved on this instance of the ospfTeMetricsSubTlvLinkType
object in this direction yet (from the advertising router),
expressed in bytes per second."
::= { ospfTeMetricsEntry 20 }
ospfTeMetricsIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface that
has been assigned a (set of) metrics."
::= { ospfTeMetricsEntry 21 }
--
-- The bgpTeTable
--
bgpTeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpTeEntry
PIB-ACCESS install-notify
STATUS current
DESCRIPTION
"This class describes the QoS information that MAY be
conveyed in BGP4 UPDATE messages for the purpose of
enforcing an inter-domain traffic engineering policy."
::= { ipTeMetricsClasses 2 }
bgpTeEntry OBJECT-TYPE
SYNTAX BgpTeEntry
STATUS current
DESCRIPTION
"The collection of QoS information to be exchanged by
BGP peers, as far as the announcement of traffic
engineered routes between domains is concerned."
PIB-INDEX { bgpTePrid }
UNIQUENESS { bgpTeNlriAddress,
bgpTeNextHopAddress,
bgpTeReservedRate,
bgpTeAvailableRate,
bgpTeLossRate,
bgpTePhbId,
bgpTeMinOneWayDelay,
bgpTeMaxOneWayDelay,
bgpTeAverageOneWayDelay,
bgpTeInterPacketDelay }
::= { bgpTeTable 1 }
BgpTeEntry ::= SEQUENCE {
bgpTePrid InstanceId,
bgpTeNlriAddressType InetAddressType,
bgpTeNlriAddress InetAddress,
bgpTeNlriAddressMask Unsigned32,
bgpTeNextHopAddressType InetAddressType,
bgpTeNextHopAddress InetAddress,
bgpTeNextHopMask Unsigned32,
bgpTeReservedRate Unsigned32,
bgpTeAvailableRate Unsigned32,
bgpTeLossRate Unsigned32,
bgpTePhbId Integer32,
bgpTeMinOneWayDelay Unsigned32,
bgpTeMaxOneWayDelay Unsigned32,
bgpTeAverageOneWayDelay Unsigned32,
bgpTeInterPacketDelay Unsigned32
}
bgpTePrid OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"An integer index that uniquely identifies this instance of
the bgpTe class."
::= { bgpTeEntry 1 }
bgpTeNlriAddressType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value ([18]) used to
specify the type of a route's destination IP address."
::= { bgpTeEntry 2 }
bgpTeNlriAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"The IP address to match against the NLRI field of the
QOS_NLRI attribute of the BGP4 UPDATE message."
::= { bgpTeEntry 3 }
bgpTeNlriAddressMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the
NLRI field of the QOS_NLRI attribute of the BGP4 UPDATE
message. Masks are constructed by setting bits in
sequence from the most-significant bit downwards for
bgpTeNlriMask bits length. All other bits in the mask,
up to the number needed to fill the length of the
address bgpTeNlri are cleared to zero. A zero bit in
the mask then means that the corresponding bit in the
address always matches."
::= { bgpTeEntry 4 }
bgpTeNextHopAddressType OBJECT-TYPE
SYNTAX InetAddressType
STATUS current
DESCRIPTION
"The address type enumeration value used to specify the
type of the next hop's IP address."
::= { bgpTeEntry 5 }
bgpTeNextHopAddress OBJECT-TYPE
SYNTAX InetAddress
STATUS current
DESCRIPTION
"On remote routes, the address of the next router en
route; Otherwise, 0.0.0.0."
::= { bgpTeEntry 6 }
bgpTeNextHopMask OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
STATUS current
DESCRIPTION
"Indicates the length of a mask for the matching of the next
hop's IP address. Masks are constructed by setting bits in
sequence from the most-significant bit downwards for
bgpTeNextHopMask bits length. All other bits in the mask, up
to the number needed to fill the length of the address
bgpTeNextHopAddress are cleared to zero. A zero bit in the
mask then means that the corresponding bit in the address
always matches."
::= { bgpTeEntry 7 }
bgpTeReservedRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "kilobits per second"
STATUS current
DESCRIPTION
"Specifies the reserved rate that cannot be used on this
instance of the bgpTeNlriAddress object in this direction
(from the advertising BGP peer), expressed in kilobits per
second."
::= { bgpTeEntry 8 }
bgpTeAvailableRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "kilobits per second"
STATUS current
DESCRIPTION
"Specifies the available rate that may be reserved on this
instance of the bgpTeNlriAddress object in this direction
(from the advertising BGP peer), expressed in kilobits per
second."
::= { bgpTeEntry 9 }
bgpTeLossRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
STATUS current
DESCRIPTION
"Specifies the packet loss ratio that has been observed on
this route instantiated by the bgpTeNlriAddress object."
::= { bgpTeEntry 10 }
bgpTePhbId OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
STATUS current
DESCRIPTION
"The binary encoding that uniquely identifies a Per Hop
Behaviour (PHB) or a set of PHBs associated to the
DiffServ Code Point marking of the IP datagrams that
are to be conveyed along this traffic engineered route.
A value of -1 indicates that a specific PHB ID value
has not been defined, and thus, all PHB ID values are
considered a match."
::= { bgpTeEntry 11 }
bgpTeMinOneWayDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milliseconds"
STATUS current
DESCRIPTION
"Specifies the minimum one-way delay that has been observed
on this route instantiated by the bgpTeNlriAddress object,
expressed in milliseconds."
::= { bgpTeEntry 12 }
bgpTeMaxOneWayDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milliseconds"
STATUS current
DESCRIPTION
"Specifies the maximum one-way delay that has been observed
on this route instantiated by the bgpTeNlriAddress object,
expressed in milliseconds."
::= { bgpTeEntry 13 }
bgpTeAverageOneWayDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milliseconds"
STATUS current
DESCRIPTION
"Specifies the average one-way delay that has been observed
on this route instantiated by the bgpTeNlriAddress object,
expressed in milliseconds."
::= { bgpTeEntry 14 }
bgpTeInterPacketDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milliseconds"
STATUS current
DESCRIPTION
"Specifies the inter-packet delay variation that has been
observed on this route instantiated by the bgpTeNlriAddress
object."
::= { bgpTeEntry 15 }
--
-- Traffic engineering statistics classes. The information contained
-- in the yet-to-be defined tables aim at reporting statistics about
-- COPS control traffic, engineered traffic and potential errors. The
-- next version of the draft will provide a first table that will be
-- based upon the use of the "count" clause.
--
--
END