Sh3ll
OdayForums


Server : Apache
System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64
User : nobody ( 99)
PHP Version : 8.1.23
Disable Function : NONE
Directory :  /usr/share/pibs/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Current File : //usr/share/pibs/LOAD-BALANCING-PIB-orig
LOAD-BALANCING-PIB PIB-DEFINITIONS ::= BEGIN 

IMPORTS 
   MODULE-IDENTITY, OBJECT-TYPE,  
   TEXTUAL-CONVENTION, MODULE-COMPLIANCE,  
   OBJECT-IDENTITY, OBJECT-GROUP 
      FROM COPS-PR-SPPI 
   TruthValue 
         FROM SNMPv2-TC 
   InstanceId, ReferenceId,  
   TagId, TagReference 
         FROM COPS-PR-SPPI-TC 
   SnmpAdminString 
         FROM SNMP-FRAMEWORK-MIB 
   InetAddress, InetAddressType 
         FROM INET-ADDRESS-MIB 

lbPolicyPib MODULE-IDENTITY 
   SUBJECT-CATEGORIES SUBJECT-CATEGORY { tbd � Load Balancing Client 
Type } 
   LAST-UPDATED "200102231000Z" 
   ORGANIZATION " WG" 
   CONTACT-INFO � 
                Harsha Hegde 
                Intel Corporation 
                MS JF3-206 
                2111 NE 25th Ave. 
                Hillsboro, OR 97124 
                Phone: +1 503 264 1439 
                Fax: +1 503 264 3483 
                E-Mail: shriharsha.hegde@intel.com 

                Brad Stone 
                Resonate, Inc. 
                385 Moffett Park Drive 
                Sunnyvale, CA 94089 
                Phone: +1 408 548 5929 
                Fax: +1 408 nnn nnnn 
                Email: bstone@resonate.com 
                � 
   DESCRIPTION 
         "This PIB module contains a set of provisioning classes 
         that describe load balancing policies." 
   ::= { tbd } 


-- 
-- Classifier Classes 
-- 

lbClassifierClasses  OBJECT IDENTIFIER ::= { lbPolicyPib 1 } 

-- 
-- Filter Table 
-- 

lbFilterTable OBJECT-TYPE 
    SYNTAX         SEQUENCE OF LbFilterEntry 
    PIB-ACCESS     install 
    STATUS         current 
    DESCRIPTION 
        "This table consists of additional filters. The filters in 
        this table extend the filters in frwkBaseFilterTable. A 
        packet must match all the fields in a filter. Wildcards may 
        be specified for those fields that are not relevant." 

    ::= { lbClassifierClasses  1 } 

lbFilterEntry OBJECT-TYPE 
    SYNTAX         LbFilterEntry 
    STATUS         current 
    DESCRIPTION 
        "An instance of this class describes a filter. " 

    EXTENDS        { frwkIpFilterEntry } 

    ::= { lbFilterTable 1 } 

LbFilterEntry ::= SEQUENCE { 
        lbFilterUrlPrefix      OCTET_STRING, 
        lbFilterUrlDomain      OCTET_STRING, 
        lbFilterUrlSuffix      OCTET_STRING } 

lbFilterUrlPrefix OBJECT-TYPE 
    SYNTAX         OCTET STRING 
    STATUS         current 
    DESCRIPTION 
        "The portion of an URL that identifies the protocol. for 
        example, http,ftp. A �*� character is used to match any 
        string." 

    ::= { lbFilterEntry 1 } 

lbFilterUrDomain OBJECT-TYPE 
    SYNTAX         OCTET STRING 
    STATUS         current 
    DESCRIPTION 
        "The portion of an URL that identifies the domain. for 
        example, www.company.com. A �*� character is used to match 
        any string." 

    ::= { lbFilterEntry 2 } 

lbFilterUrlSuffix OBJECT-TYPE 
    SYNTAX         OCTET STRING 
    STATUS         current 
    DESCRIPTION 
        "The portion of an URL that identifies the file name. for 
        example, index.html, mypic.jpg. A �*.*� string matches any 
        file, a �*.jpg� string matches all files with jpg extension, 
        and a �index.*� matches all �index� files with any  
        extension." 

    ::= { lbFilterEntry 3 } 

-- 
-- Filter Group Table 
-- 

lbFilterGroupTable OBJECT-TYPE 
    SYNTAX         SEQUENCE OF LbFilterGroupEntry 
    PIB-ACCESS     install 
    STATUS         current 
    DESCRIPTION 
        "A class that defines Filter Groups. Each Group being an 
        ordered list of filters.  Each instance of this class 
        identifies one filter of a group and the precedence order of 
        that filter with respect to other filters in the same 
        group." 

    ::= { lbClassifierClasses  2 } 

lbFilterGroupEntry OBJECT-TYPE 
    SYNTAX         LbFilterGroupEntry 
    STATUS         current 
    DESCRIPTION 
        "An instance of filter group." 

    PIB-INDEX { lbFilterGroupPrid } 

    ::= { lbFilterGroupTable 1 } 

LbFilterGroupEntry ::= SEQUENCE { 
        lbFilterGroupPrid           InstanceId, 
        lbFilterGroupId             TagId, 
        lbFilterGroupFilterId       ReferenceId, 
        lbFilterGroupPriority       Unsigned32 } 

lbFilterGroupPrid OBJECT-TYPE 
    SYNTAX         InstanceId 
    STATUS         current 
    DESCRIPTION 
        "An integer index that uniquely identifies an instance of 
        the lbFilterGroupEntry class." 

    ::= { lbFilterGroupEntry 1 } 

lbFilterGroupId OBJECT-TYPE 
    SYNTAX         TagId 
    STATUS         current 
    DESCRIPTION 
        "An arbitrary integer that identifies the group of filters. 
        The same lbFilterGroupId is used in all lbFilterGroupEntry 
        instances that belong to a group." 

    ::= { lbFilterGroupEntry 2 } 

lbFilterGroupFilterId OBJECT-TYPE 
    SYNTAX         ReferenceId 
    PIB-REFERENCES { lbFilterEntry }  
    STATUS         current 
    DESCRIPTION 
        "Pointer to an instance of filter. The filter with the same 
        Id must be present." 

    ::= { lbFilterGroupEntry 3 } 

lbFilterGroupPriority OBJECT-TYPE 
    SYNTAX         Unsigned32 
    STATUS         current 
    DESCRIPTION 
        "An arbitrary integer index that specifies the position of 
        this filter in the filter group. A filter with a given  
        priority order is positioned in the filter group before one 
        with a higher-value priority. Priority values within a group 
        must be unique." 

    ::= { lbFilterGroupEntry 4 } 


-- 
-- Capabilities Classes 
-- 

lbCapabilitiesClasses  OBJECT IDENTIFIER ::= { lbPolicyPib 2 } 

-- 
-- Capabilities Table 
-- 

lbCapabilitiesTable OBJECT-TYPE 
    SYNTAX         SEQUENCE OF LbCapabilitiesEntry 
    PIB-ACCESS     install-notify 
    STATUS         current 
    DESCRIPTION 
        "This table consists of load balancer capabilities. 
        Instances of this class are used by the PEP to notify PEP 
        capabilities and by the PDP to install policies. The PDP 
        must not install a capability not reported by the PEP " 

    ::= { lbCapabilitiesClasses 1 } 

lbCapabilitiesEntry OBJECT-TYPE 
    SYNTAX         LbCapabilitiesEntry 
    STATUS         current 
    DESCRIPTION 
        "An instance of this class describes a set of capabilities 
        of the load balancer or the capabilities applied to a 
        service policy." 

    ::= { lbCapabilitiesTable 1 } 

LbCapabilitiesEntry ::= SEQUENCE { 
        lbCapPrid              InstanceId, 
        lbCapStickyMode        BITS, 
        lbCapHttpReturnCodes   BITS, 
        lbCapBalanceAlgorithm  BITS, 
        lbCapAlgorithmParams   Prid, 
        lbCapPreserveSrcAddr   TruthValue, 
        lbCapDirectReturn      TruthValue } 

lbCapPrid OBJECT-TYPE 
    SYNTAX         InstanceId 
    STATUS         current 
    DESCRIPTION 
        "An integer index that uniquely identifies an instance of 
        the lbCapabilitiesEntry class." 

    ::= { lbCapabilitiesEntry 1 } 

lbCapStickyMode OBJECT-TYPE 
    SYNTAX         BITS { 
                       cookieBased (1), 
                       sourceAddressBased (2) } 
    STATUS         current 
    DESCRIPTION 
        "Set of values indicating the type of Sticky Mode in this 
        capabilities set. When PEP notifies PDP, the bits indicate 
        the support of these mechanisms. When PDP installs policies,  
        the bits indicate what mechanism must be used." 

    ::= { lbCapabilitiesEntry 2 } 

lbCapReturnCodes OBJECT-TYPE 
    SYNTAX         BITS { 
                       http404(1), 
                       http505(2) } 
    STATUS         current 
    DESCRIPTION 
        "Set of values indicating the type of HTTP return codes that 
        the load balancer can interpret and redirect the request to 
        another server. When PEP notifies PDP, the bits indicate 
        the ability to interpret the HTTP return codes. When PDP 
        installs policies, the bits indicate enabling redirection on 
        any of those HTTP return codes." 

    ::= { lbCapabilitiesEntry 3 } 

lbCapBalanceAlgorithm OBJECT-TYPE 
    SYNTAX         BITS { 
                       roundRobin(1), 
                       weightedRoundRobin(2), 
                       leastConnections(3), 
                       weightedLeastConnections(4), 
                       fastestServerResponse(5), 
                       serverCpuUtilizaiton(6), 
                       priorityToUser(7) } 
    STATUS         current 
    DESCRIPTION 
        "Set of values indicating the type of server balance 
        algorithm. When PEP notifies PDP, the bits indicate all the 
        algorithms supported. When PDP installs policies the bits  
        indicate only one algorithm that must be used. Additional  
        parameters needed for the algorithm may be specified in  
        another PRC instance identified by the lbCapAlgorithmParams  
        attribute." 

    ::= { lbCapabilitiesEntry 4 } 

lbCapAlgorithmParams OBJECT-TYPE 
    SYNTAX         Prid 
    STATUS         current 
    DESCRIPTION 
        "This points to PRI that contains parameters needed for a  
        specific algorithm. The PRI pointed to must exist prior to  
        the installation of this class.  

        TBD: define parameters classes for all existing algorithms.� 

    ::= { lbCapabilitiesEntry 5 } 

lbCapPreserveSrcAddr OBJECT-TYPE 
    SYNTAX         TruthValue 
    STATUS         current 
    DESCRIPTION 
        "Indicates whether Source Address must be preserved when 
        forwarding a request to server.� 

    ::= { lbCapabilitiesEntry 6 } 

lbCapDirectReturn OBJECT-TYPE 
    SYNTAX         TruthValue 
    STATUS         current 
    DESCRIPTION 
        "Indicates whether a response from data center server could 
        go directly to client bypassing the load balancer.� 

    ::= { lbCapabilitiesEntry 7 } 


-- 
-- Server Classes 
-- 

lbServerClasses  OBJECT IDENTIFIER ::= { lbPolicyPib 3 } 

-- 
-- Server Table 
-- 

lbServerTable OBJECT-TYPE 
    SYNTAX         SEQUENCE OF LbServerEntry 
    PIB-ACCESS     install 
    STATUS         current 
    DESCRIPTION 
        "This table consists of data center servers." 

    ::= { lbCapabilitiesClasses 1 } 

lbServerEntry OBJECT-TYPE 
    SYNTAX         LbServerEntry 
    STATUS         current 
    DESCRIPTION 
        "An instance of this class describes a data center server." 

    PIB-INDEX { lbServerPrid } 

    ::= { lbServerTable 1 } 

LbServerEntry ::= SEQUENCE { 
        lbServerPrid           InstanceId, 
        lbServerName           SnmpAdminString, 
        lbServerAddressType    InetAddressType, 
        lbServerAddress        InetAddress, 
        lbServerMode           INTEGER } 

lbServerPrid OBJECT-TYPE 
    SYNTAX         InstanceId 
    STATUS         current 
    DESCRIPTION 
        "An integer index that uniquely identifies an instance of 
        the lbServerEntry class." 

    ::= { lbServerEntry 1 } 

lbServerName OBJECT-TYPE 
    SYNTAX         SnmpAdminString 
    STATUS         current 
    DESCRIPTION 
        "A name for server." 

    ::= { lbServerEntry 2 } 

lbServerAddressType OBJECT-TYPE 
    SYNTAX         InetAddressType 
    STATUS         current 
    DESCRIPTION 
        "Type of address for server." 

    ::= { lbServerEntry 3 } 

lbServerAddress OBJECT-TYPE 
    SYNTAX         InetAddress 
    STATUS         current 
    DESCRIPTION 
        "Address (IP address or DNS Name) for server." 

    ::= { lbServerEntry 4 } 

lbServerMode OBJECT-TYPE 
    SYNTAX         INTEGER { 
                       Disabled(0), 
                       Primary(1), 
                       Backup(2) } 
    STATUS         current 
    DESCRIPTION 
        "Indicates the mode of the server. Enumeration values are 
             primary server  (1) 
             backup server   (2)  
             disabled        (0)." 

    ::= { lbServerEntry 5 } 

-- 
-- Server Group Table 
-- 

lbServerGroupTable OBJECT-TYPE 
    SYNTAX         SEQUENCE OF LbServerGroupEntry 
    PIB-ACCESS     install 
    STATUS         current 
    DESCRIPTION 
        "A class that defines Server Groups. Each Group being an 
        ordered list of data center servers.  Each instance of this 
        class identifies one server of a group and the precedence 
        order of that server with respect to other servers in the 
        same group." 

    ::= { lbServerClasses  2 } 

lbServerGroupEntry OBJECT-TYPE 
    SYNTAX         LbServerGroupEntry 
    STATUS         current 
    DESCRIPTION 
        "An instance of server group." 

    PIB-INDEX { lbServerGroupPrid } 

    ::= { lbServerGroupTable 1 } 

LbServerGroupEntry ::= SEQUENCE { 
        lbServerGroupPrid           InstanceId, 
        lbServerGroupId             TagId, 
        lbServerGroupServerId       ReferenceId, 
        lbServerGroupPriority       Unsigned32 } 

lbServerGroupPrid OBJECT-TYPE 
    SYNTAX         InstanceId 
    STATUS         current 
    DESCRIPTION 
        "An integer index that uniquely identifies an instance of 
        the lbServerGroupEntry class." 

    ::= { lbServerGroupEntry 1 } 

lbServerGroupId OBJECT-TYPE 
    SYNTAX         TagId 
    STATUS         current 
    DESCRIPTION 
        "An arbitrary integer that identifies the group of servers. 
        The same lbServerGroupId is used in all lbServerGroupEntry 
        instances that belong to a group." 

    ::= { lbServerGroupEntry 2 } 

lbServerGroupServerId OBJECT-TYPE 
    SYNTAX         ReferenceId 
    PIB-REFERENCES { lbServerEntry } 
    STATUS         current 
    DESCRIPTION 
        "Pointer to an instance of server. The server with the same 
        Id must be present." 

    ::= { lbServerGroupEntry 3 } 

lbServerGroupPriority OBJECT-TYPE 
    SYNTAX         Unsigned32 
    STATUS         current 
    DESCRIPTION 
        "An arbitrary integer index that specifies the position of 
        this server in the server group. A server with a given  
        priority order is positioned in the server group before one 
        with a higher-value priority. Priority values within a group 
        must be unique." 

    ::= { lbServerGroupEntry 4 } 


-- 
-- Service Classes 
-- 

lbServiceClasses  OBJECT IDENTIFIER ::= { lbPolicyPib 4 } 

-- 
-- Service Table 
-- 

lbServiceTable OBJECT-TYPE 
    SYNTAX         SEQUENCE OF LbServiceEntry 
    PIB-ACCESS     install 
    STATUS         current 
    DESCRIPTION 
        "This table consists of entries that combine filter groups, 
        capabilities and server groups to form services." 

    ::= { lbServiceClasses 1 } 

lbServiceEntry OBJECT-TYPE 
    SYNTAX         LbServiceEntry 
    STATUS         current 
    DESCRIPTION 
        "An instance of this class describes a service." 

    PIB-INDEX { lbServicePrid } 

    ::= { lbServiceTable 1 } 

LbServiceEntry ::= SEQUENCE { 
        lbServicePrid           InstanceId, 
        lbServiceName           SnmpAdminString, 
        lbServiceFilterGroupId  TagReference, 
        lbServiceServerGroupId  TagReference, 
        lbServiceCapabilitiesId ReferenceId } 

lbServicePrid OBJECT-TYPE 
    SYNTAX         InstanceId 
    STATUS         current 
    DESCRIPTION 
        "An integer index that uniquely identifies an instance of 
        the lbServiceEntry class." 

    ::= { lbServiceEntry 1 } 

lbServiceName OBJECT-TYPE 
    SYNTAX         SnmpAdminString 
    STATUS         current 
    DESCRIPTION 
        "Name to identify a service." 

    ::= { lbServiceEntry 2 } 

lbServiceFilterGroupId OBJECT-TYPE 
    SYNTAX         TagReference 
    PIB-TAG        { lbFilterGroupId } 
    STATUS         current 
    DESCRIPTION 
        "Pointer to a group of Filters. An instance of 
        lbFilterGroupEntry with the same tag id must be present." 

    ::= { lbServiceEntry 3 } 

lbServiceServerGroupId OBJECT-TYPE 
    SYNTAX         TagReference 
    PIB-TAG        { lbServerGroupId } 
    STATUS         current 
    DESCRIPTION 
        "Pointer to a group of Servers. An instance of 
        lbServerGroupEntry with the same tag id must be present." 

    ::= { lbServiceEntry 4 } 

lbServiceCapabilitiesId OBJECT-TYPE 
    SYNTAX         ReferenceId 
    PIB-REFERENCES { lbCapabilitiesEntry } 
    STATUS         current 
    DESCRIPTION 
        "Pointer to an instance of capabilities class. An instance 
        of lbCapabilitiesEntry with the same tag id must be 
        present." 

    ::= { lbServiceEntry 5 } 



-- Compliance section 
-- TBD 
END

ZeroDay Forums Mini