Server : Apache System : Linux server1.cgrithy.com 3.10.0-1160.95.1.el7.x86_64 #1 SMP Mon Jul 24 13:59:37 UTC 2023 x86_64 User : nobody ( 99) PHP Version : 8.1.23 Disable Function : NONE Directory : /usr/share/pibs/ |
MPLS-SETUP-PIB PIB-DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TEXTUAL-CONVENTION, MODULE-COMPLIANCE, OBJECT-IDENTITY, OBJECT-GROUP FROM COPS-PR-SPPI TruthValue FROM SNMPv2-TC InstanceId, ReferenceId, TagId, TagReference FROM COPS-PR-SPPI-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressIPv4, InetAddressIPv6 FROM INET-ADDRESS-MIB mplsSetupPib MODULE-IDENTITY SUBJECT-CATEGORIES SUBJECT-CATEGORY { tbd � MPLS Setup Client Type } LAST-UPDATED "200107131000Z" ORGANIZATION " WG" CONTACT-INFO " Harsha Hegde Intel Corporation MS JF3-206 2111 NE 25th Ave. Hillsboro, OR 97124 Phone: +1 503 264 1439 Fax: +1 503 264 3483 E-Mail: shriharsha.hegde@intel.com Ravi Sahita Intel Corporation JF3-206 2111 NE 25th Ave Hillsboro, Oregon 97124 Phone: +1 503 264 1439 Fax: +1 503 264 3483 Email: ravi.sahita@intel.com " DESCRIPTION "This PIB module contains a set of provisioning classes that are used to setup MPLS LSPs on MPLS Routers." ::= { tbd } -- -- Forward Equivalence Class (FEC) Classes -- mplsFecClasses OBJECT IDENTIFIER ::= { mplsSetupPib 1 } -- -- IPv4 Host Address FEC Table -- mplsFecIPv4HostAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFecIPv4HostAddrEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS IPv4 FEC Entrees." ::= { mplsFecClasses 1 } mplsFecIPv4HostAddrEntry OBJECT-TYPE SYNTAX MplsFecIPv4HostAddrEntry STATUS current DESCRIPTION "An instance of this class describes MPLS IPv4 Host Address FEC. " PIB-INDEX { mplsFecIPv4HostAddrPrid } ::= { mplsFecIPv4HostAddrTable 1 } MplsFecIPv4HostAddrEntry ::= SEQUENCE { mplsFecIPv4HostAddrPrid InstanceId, mplsFecIPv4HostAddrIpAddr InetAddressIPv4 } mplsFecIPv4HostAddrPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFecIPv4HostAddrEntry class." ::= { mplsFecIPv4HostAddrEntry 1 } mplsFecIPv4HostAddrIpAddr OBJECT-TYPE SYNTAX InetAddressIPv4 STATUS current DESCRIPTION "IPv4 Host Address in a FEC." ::= { mplsFecIPv4HostAddrEntry 2 } -- -- IPv6 Host Address FEC Table -- mplsFecIPv6HostAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFecIPv6HostAddrEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS IPv6 FEC entrees." ::= { mplsFecClasses 2 } mplsFecIPv6HostAddrEntry OBJECT-TYPE SYNTAX MplsFecIPv6HostAddrEntry STATUS current DESCRIPTION "An instance of this class describes an IPv6 Host Address FEC. " PIB-INDEX { mplsFecIPv6HostAddrPrid } ::= { mplsFecIPv6HostAddrTable 1 } MplsFecIPv6HostAddrEntry ::= SEQUENCE { mplsFecIPv6HostAddrPrid InstanceId, mplsFecIPv6HostAddrIpAddr InetAddressIPv6 } mplsFecIPv6HostAddrPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFecIPv6HostAddrEntry class." ::= { mplsFecIPv6HostAddrEntry 1 } mplsFecIPv6HostAddrIpAddr OBJECT-TYPE SYNTAX InetAddressIPv6 STATUS current DESCRIPTION "IPv6 Host Address in a FEC." ::= { mplsFecIPv6HostAddrEntry 2 } -- -- IPv4 Prefix FEC Table -- mplsFecIPv4PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFecIPv4PrefixEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS IPv4 Prefix FEC entrees." ::= { mplsFecClasses 3 } mplsFecIPv4PrefixEntry OBJECT-TYPE SYNTAX MplsFecIPv4PrefixEntry STATUS current DESCRIPTION "An instance of this class describes a IPv4 Prefix FEC." PIB-INDEX { mplsFecIPv4PrefixPrid } ::= { mplsFecIPv4PrefixTable 1 } MplsFecIPv4PrefixEntry ::= SEQUENCE { mplsFecIPv4PrefixPrid InstanceId, mplsFecIPv4PrefixLength Unsigned32, mplsFecIPv4PrefixIpPrefix InetAddressIPv4 } mplsFecIPv4PrefixPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFecIPv4PrefixEntry class." ::= { mplsFecIPv4PrefixEntry 1 } mplsFecIPv4PrefixLength OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Length of IPv4 Prefix in a FEC." ::= { mplsFecIPv4PrefixEntry 2 } mplsFecIPv4PrefixIpPrefix OBJECT-TYPE SYNTAX InetAddressIPv4 STATUS current DESCRIPTION "IPv4 Prefix in a FEC." ::= { mplsFecIPv4PrefixEntry 3 } -- -- IPv6 Prefix FEC Table -- mplsFecIPv6PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFecIPv6PrefixEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS IPv6 Prefix FEC entrees." ::= { mplsFecClasses 4 } mplsFecIPv6PrefixEntry OBJECT-TYPE SYNTAX MplsFecIPv6PrefixEntry STATUS current DESCRIPTION "An instance of this class describes a IPv6 Prefix FEC." PIB-INDEX { mplsFecIPv6PrefixPrid } ::= { mplsFecIPv6PrefixTable 1 } MplsFecIPv6PrefixEntry ::= SEQUENCE { mplsFecIPv6PrefixPrid InstanceId, mplsFecIPv6PrefixLength Unsigned32, mplsFecIPv6PrefixIpPrefix InetAddressIPv6 } mplsFecIPv6PrefixPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFecIPv6PrefixEntry class." ::= { mplsFecIPv6PrefixEntry 1 } mplsFecIPv6PrefixLength OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Length of IPv6 Prefix in a FEC." ::= { mplsFecIPv6PrefixEntry 2 } mplsFecIPv6PrefixIpPrefix OBJECT-TYPE SYNTAX InetAddressIPv6 STATUS current DESCRIPTION "IPv6 Prefix in a FEC." ::= { mplsFecIPv6PrefixEntry 3 } -- -- Autonomous System Number FEC Table -- mplsFecASTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFecASEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS Autonomous System Number FEC entrees." ::= { mplsFecClasses 5 } mplsFecASEntry OBJECT-TYPE SYNTAX MplsFecASEntry STATUS current DESCRIPTION "An instance of this class describes an Autonomous System Number FEC. " PIB-INDEX { mplsFecASPrid } ::= { mplsFecASTable 1 } MplsFecASEntry ::= SEQUENCE { mplsFecASPrid InstanceId, mplsFecASNumber Unsigned32 } mplsFecASPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFecASEntry class." ::= { mplsFecASEntry 1 } mplsFecASNumber OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Autonomous System Number in a FEC." ::= { mplsFecASEntry 2 } -- -- Label Request Classes -- mplsLabReqClasses OBJECT IDENTIFIER ::= { mplsSetupPib 2 } -- -- Generic Label Request Table -- mplsLabReqGenericTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLabReqGenericEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS Generic Label Request Object entrees." ::= { mplsLRClasses 1 } mplsLabReqGenericEntry OBJECT-TYPE SYNTAX MplsLabReqGenericEntry STATUS current DESCRIPTION "An instance of this class describes MPLS Generic Label Request Object. " PIB-INDEX { mplsLabReqGenericPrid } ::= { mplsLabReqGenericTable 1 } MplsLabReqGenericEntry ::= SEQUENCE { mplsLabReqGenericPrid InstanceId, mplsLabReqGenericL3Pid Unsigned32 } mplsLabReqGenericPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsLabReqGenericEntry class." ::= { mplsLabReqGenericEntry 1 } mplsLabReqGenericL3Pid OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Layer 3 Protocol Id in MPLS Generic Label Request Object." ::= { mplsLabReqGenericEntry 2 } -- -- ATM Label Request Table -- mplsLabReqATMTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLabReqATMEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS ATM Label Request Object entrees." ::= { mplsLabReqClasses 1 } mplsLabReqATMEntry OBJECT-TYPE SYNTAX MplsLabReqATMEntry STATUS current DESCRIPTION "An instance of this class describes MPLS ATM Label Request Object. " PIB-INDEX { mplsLabReqATMPrid } ::= { mplsLabReqATMTable 1 } MplsLabReqATMEntry ::= SEQUENCE { mplsLabReqATMPrid InstanceId, mplsLabReqATML3Pid Unsigned32, mplsLabReqATMMbit Unsigned32, mplsLabReqATMMinVpi Unsigned32, mplsLabReqATMMaxVpi Unsigned32, mplsLabReqATMMinVci Unsigned32, mplsLabReqATMMaxVci Unsigned32 } mplsLabReqATMPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsLabReqATMEntry class." ::= { mplsLabReqATMEntry 1 } mplsLabReqATML3Pid OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Layer 3 Protocol Id in MPLS ATM Label Request Object." ::= { mplsLabReqATMEntry 2 } mplsLabReqATMMbit OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Merging Capable Bit in MPLS ATM Label Request Object." ::= { mplsLabReqATMEntry 3 } mplsLabReqATMMinVpi OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Minimum value for VPI in MPLS ATM Label Request Object." ::= { mplsLabReqATMEntry 4 } mplsLabReqATMMaxVpi OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Maximum value for VPI in MPLS ATM Label Request Object." ::= { mplsLabReqATMEntry 5 } mplsLabReqATMMinVci OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Minimum value for VCI in MPLS ATM Label Request Object." ::= { mplsLabReqATMEntry 6 } mplsLabReqATMMaxVci OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Maximum value for VCI in MPLS ATM Label Request Object." ::= { mplsLabReqATMEntry 7 } -- -- Frame Relay Label Request Table -- mplsLabReqFRTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLabReqFREntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS Frame Relay Label Request Object entrees." ::= { mplsLabReqClasses 1 } mplsLabReqFREntry OBJECT-TYPE SYNTAX MplsLabReqFREntry STATUS current DESCRIPTION "An instance of this class describes MPLS Frame Relay Label Request Object. " PIB-INDEX { mplsLabReqFRPrid } ::= { mplsLabReqFRTable 1 } MplsLabReqFREntry ::= SEQUENCE { mplsLabReqFRPrid InstanceId, mplsLabReqFRL3Pid Unsigned32, mplsLabReqFRDlciLen Unsigned32, mplsLabReqFRMinDlci Unsigned32, mplsLabReqFRMaxDlci Unsigned32} mplsLabReqFRPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsLabReqFREntry class." ::= { mplsLabReqFREntry 1 } mplsLabReqFRL3Pid OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Layer 3 Protocol Id in MPLS Frame Relay Label Request Object." ::= { mplsLabReqFREntry 2 } mplsLabReqFRDlciLen OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Length of DLCI in MPLS Frame Relay Label Request Object." ::= { mplsLabReqFREntry 3 } mplsLabReqFRMinDlci OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Minimum value DLCI in MPLS Frame Relay Label Request Object." ::= { mplsLabReqFREntry 4 } mplsLabReqFRMaxDlci OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Maximum value DLCI in MPLS Frame Relay Label Request Object." ::= { mplsLabReqFREntry 5 } -- -- Flow (Traffic) Specification Classes -- mplsFlowSpecClasses OBJECT IDENTIFIER ::= { mplsSetupPib 3 } -- -- CRLDP Flow Spec Table -- mplsFlowSpecCRLDPTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFlowSpecCRLDPEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of CR-LDP Traffic (Flow) Specification entrees." ::= { mplsFlowSpecClasses 1 } mplsFlowSpecCRLDPEntry OBJECT-TYPE SYNTAX MplsFlowSpecCRLDPEntry STATUS current DESCRIPTION "An instance of this class describes a CR-LDP Flow Specification. " PIB-INDEX { mplsFlowSpecCRLDPPrid } ::= { mplsFlowSpecCRLDPTable 1 } MplsFlowSpecCRLDPEntry ::= SEQUENCE { mplsFlowSpecCRLDPPrid InstanceId, mplsFlowSpecCRLDPPDR Unsigned32, mplsFlowSpecCRLDPPBS Unsigned32, mplsFlowSpecCRLDPCDR Unsigned32, mplsFlowSpecCRLDPCBS Unsigned32, mplsFlowSpecCRLDPEBS Unsigned32, mplsFlowSpecCRLDPWeight Unsigned32 } mplsFlowSpecCRLDPPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFlowSpecCRLDPEntry class." ::= { mplsFlowSpecCRLDPEntry 1 } mplsFlowSpecCRLDPPDR OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Peak Data Rate in CR-LDP Flow Specification." ::= { mplsFlowSpecCRLDPEntry 2 } mplsFlowSpecCRLDPPBS OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Peak Burst Size in CR-LDP Flow Specification." ::= { mplsFlowSpecCRLDPEntry 3 } mplsFlowSpecCRLDPCDR OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Committed Data Rate in CR-LDP Flow Specification." ::= { mplsFlowSpecCRLDPEntry 4 } mplsFlowSpecCRLDPCBS OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Committed Burst Size in CR-LDP Flow Specification." ::= { mplsFlowSpecCRLDPEntry 5 } mplsFlowSpecCRLDPEBS OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Excess Burst Size in CR-LDP Flow Specification." ::= { mplsFlowSpecCRLDPEntry 6 } mplsFlowSpecCRLDPWeight OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Weight parameter in CR-LDP Flow Specification." ::= { mplsFlowSpecCRLDPEntry 7 } -- -- RSVP Controlled Load Service Flow Spec Table -- mplsFlowSpecCLSTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFlowSpecCLSEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of RSVP-TE Integrated Services (IntServ) Controlled Load Service Flow Specification entrees." ::= { mplsFlowSpecClasses 2 } mplsFlowSpecCLSEntry OBJECT-TYPE SYNTAX MplsFlowSpecCLSEntry STATUS current DESCRIPTION "An instance of this class describes RSVP-TE IntServ Controlled Load Service Flow Specification. " PIB-INDEX { mplsFlowSpecCLSPrid } ::= { mplsFlowSpecCLSTable 1 } MplsFlowSpecCLSEntry ::= SEQUENCE { mplsFlowSpecCLSPrid InstanceId, mplsFlowSpecCLSTokenRate Unsigned32, mplsFlowSpecCLSBucketSize Unsigned32, mplsFlowSpecCLSPeakRate Unsigned32, mplsFlowSpecCLSMinPoliced Unsigned32, mplsFlowSpecCLSMaxPktSize Unsigned32 } mplsFlowSpecCLSPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFlowSpecCLSEntry class." ::= { mplsFlowSpecCLSEntry 1 } mplsFlowSpecCLSTokenRate OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Token Rate in RSVP-TE IntServ Controlled Load Service Flow Specification." ::= { mplsFlowSpecCLSEntry 2 } mplsFlowSpecCLSBucketSize OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Token Bucket Size in RSVP-TE IntServ Controlled Load Service Flow Specification." ::= { mplsFlowSpecCLSEntry 3 } mplsFlowSpecCLSPeakRate OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Peak Rate in RSVP-TE IntServ Controlled Load Service Flow Specification." ::= { mplsFlowSpecCLSEntry 4 } mplsFlowSpecCLSMinPoliced OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Minimum Policed Packet Size in RSVP-TE IntServ Controlled Load Service Flow Specification." ::= { mplsFlowSpecCLSEntry 5 } mplsFlowSpecCLSMaxPktSize OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Maximum Packet Size in RSVP-TE IntServ Controlled Load Service Flow Specification." ::= { mplsFlowSpecCLSEntry 6 } -- -- RSVP Guaranteed Service Flow Spec Table -- mplsFlowSpecGSTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFlowSpecGSEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of RSVP-TE Integrated Services (IntServ) Guaranteed Service Flow Specification entrees." ::= { mplsFlowSpecClasses 3 } mplsFlowSpecGSEntry OBJECT-TYPE SYNTAX MplsFlowSpecGSEntry STATUS current DESCRIPTION "An instance of this class describes RSVP-TE IntServ Guaranteed Service Flow Specification. " PIB-INDEX { mplsFlowSpecGSPrid } ::= { mplsFlowSpecGSTable 1 } MplsFlowSpecGSEntry ::= SEQUENCE { mplsFlowSpecGSPrid InstanceId, mplsFlowSpecGSTokenRate Unsigned32, mplsFlowSpecGSBucketSize Unsigned32, mplsFlowSpecGSPeakRate Unsigned32, mplsFlowSpecGSMinPoliced Unsigned32, mplsFlowSpecGSMaxPktSize Unsigned32, mplsFlowSpecGSRspecRate Unsigned32, mplsFlowSpecGSSlackTerm Unsigned32 } mplsFlowSpecGSPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsFlowSpecGSEntry class." ::= { mplsFlowSpecGSEntry 1 } mplsFlowSpecGSTokenRate OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Token Rate in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 2 } mplsFlowSpecGSBucketSize OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Token Bucket Size in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 3 } mplsFlowSpecGSPeakRate OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Peak Rate in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 4 } mplsFlowSpecGSMinPoliced OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Minimum Policed Packet Size in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 5 } mplsFlowSpecGSMaxPktSize OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Maximum Packet Size in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 6 } mplsFlowSpecGSRspecRate OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Required Rate in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 7 } mplsFlowSpecGSSlackTerm OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Slack Term (Delay) in RSVP-TE IntServ Guaranteed Service Flow Specification." ::= { mplsFlowSpecGSEntry 8 } -- -- Explicit Route Object (ERO) Classes -- mplsEroClasses OBJECT IDENTIFIER ::= { mplsSetupPib 4 } -- -- IPv4 Address Prefix Subobject Table -- mplsEroIPv4PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsEroIPv4PrefixEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS IPv4 Prefix ERO Subobject Entrees." ::= { mplsEroClasses 1 } mplsEroIPv4PrefixEntry OBJECT-TYPE SYNTAX MplsEroIPv4PrefixEntry STATUS current DESCRIPTION "An instance of this class describes IPv4 Prefix ERO Subobject. " PIB-INDEX { mplsEroIPv4PrefixPrid } ::= { mplsEroIPv4PrefixTable 1 } MplsEroIPv4PrefixEntry ::= SEQUENCE { mplsEroIPv4PrefixPrid InstanceId, mplsEroIPv4PrefixLen Unsigned32, mplsEroIPv4PrefixIPv4Addr InetAddressIPv4 } mplsEroIPv4PrefixPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsEroIPv4PrefixEntry class." ::= { mplsEroIPv4PrefixEntry 1 } mplsEroIPv4PrefixLen OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Length of Prefix in IPv4 Prefix ERO Subobject." ::= { mplsEroIPv4PrefixEntry 2 } mplsEroIPv4PrefixIPv4Addr OBJECT-TYPE SYNTAX InetAddress STATUS current DESCRIPTION "IPv4 Prefix in IPv4 Prefix ERO Subobject." ::= { mplsEroIPv4PrefixEntry 3 } -- -- IPv6 Address Prefix Subobject Table -- mplsEroIPv6PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsEroIPv6PrefixEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS IPv6 Prefix ERO Subobject Entrees." ::= { mplsEroClasses 2 } mplsEroIPv6PrefixEntry OBJECT-TYPE SYNTAX MplsEroIPv6PrefixEntry STATUS current DESCRIPTION "An instance of this class describes IPv6 Prefix ERO Subobject. " PIB-INDEX { mplsEroIPv6PrefixPrid } ::= { mplsEroIPv6PrefixTable 1 } MplsEroIPv6PrefixEntry ::= SEQUENCE { mplsEroIPv6PrefixPrid InstanceId, mplsEroIPv6PrefixLen Unsigned32, mplsEroIPv6PrefixIPv6Addr InetAddressIPv6 } mplsEroIPv6PrefixPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsEroIPv6PrefixEntry class." ::= { mplsEroIPv6PrefixEntry 1 } mplsEroIPv6PrefixLen OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Length of Prefix in IPv6 Prefix ERO Subobject." ::= { mplsEroIPv6PrefixEntry 2 } mplsEroIPv6PrefixIPv6Addr OBJECT-TYPE SYNTAX InetAddress STATUS current DESCRIPTION "IPv6 Prefix in IPv6 Prefix ERO Subobject." ::= { mplsEroIPv6PrefixEntry 3 } -- -- Autonomous System Number Subobject Table -- mplsEroASNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsEroASNumberEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS Autonomous System Number ERO Subobject Entrees." ::= { mplsEroClasses 3 } mplsEroASNumberEntry OBJECT-TYPE SYNTAX MplsEroASNumberEntry STATUS current DESCRIPTION "An instance of this class describes Autonomous System Number ERO Subobject. " PIB-INDEX { mplsEroASNumberPrid } ::= { mplsEroASNumberTable 1 } MplsEroASNumberEntry ::= SEQUENCE { mplsEroASNumberPrid InstanceId, mplsEroASNumberASNumber Unsigned32} mplsEroASNumberPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsEroASNumberEntry class." ::= { mplsEroASNumberEntry 1 } mplsEroASNumberASNumber OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Autonomous System Number in Autonomous System Number Subobject." ::= { mplsEroASNumberEntry 2 } -- -- ERO Table -- mplsEroTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsEroEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS ERO Subobject Entrees." ::= { mplsEroClasses 4 } mplsEroEntry OBJECT-TYPE SYNTAX MplsEroEntry STATUS current DESCRIPTION "An instance of this class describes ERO Subobject." PIB-INDEX { mplsEroPrid } ::= { mplsEroTable 1 } MplsEroEntry ::= SEQUENCE { mplsEroPrid InstanceId, mplsEroLoose Unsigned32, mplsEroSubObject Prid } mplsEroPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsEroEntry class." ::= { mplsEroEntry 1 } mplsEroLoose OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Loose Bit in ERO Subobject." ::= { mplsEroEntry 2 } mplsEroSubObject OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "This points to an instance of one type of ERO subobject. It could be an instance of mplsEroIpv4PrefixEntry, mplsEroIpv6PrefixEntry or mplsEroASNumberEntry." ::= { mplsEroEntry 3 } -- -- Ero Group Table -- mplsEroGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsEroGroupEntry PIB-ACCESS install STATUS current DESCRIPTION "This table defines ERO Subobject groups. Each group then is used in an LSP definition. Grouping is done using a TagId and order of Subobject in a group is provided by using a precedence number." ::= { mplsEroClasses 5 } mplsEroGroupEntry OBJECT-TYPE SYNTAX MplsEroGroupEntry STATUS current DESCRIPTION "An instance of ERO Subobject group." PIB-INDEX { mplsEroGroupPrid } ::= { mplsEroGroupTable 1 } MplsEroGroupEntry ::= SEQUENCE { mplsEroGroupPrid InstanceId, mplsEroGroupId TagId, mplsEroGroupIdPrecedence Unsigned32, mplsEroGroupEroId ReferenceId } mplsEroGroupPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsEroGroupEntry class." ::= { mplsEroGroupEntry 1 } mplsEroGroupId OBJECT-TYPE SYNTAX TagId STATUS current DESCRIPTION "Tag Id (number) used to group multiple entries in this table." ::= { mplsEroGroupEntry 2 } mplsEroGroupIdPrecedence OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "This is used to provide ordering for entries with the same Tag Id." ::= { mplsEroGroupEntry 3 } mplsEroGroupEroId OBJECT-TYPE SYNTAX ReferenceId PIB-REFERENCES { mplsEroEntry } STATUS current DESCRIPTION "Pointer to an instance of ERO Subobject. The ERO Subobject with the same Id must be present." ::= { mplsEroGroupEntry 4 } -- -- Preemption Classes -- mplsPreemptionClasses OBJECT IDENTIFIER ::= { mplsSetupPib 5 } -- -- Preemption Table -- mplsPreemptionTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsPreemptionEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of LSP Preemption Entrees." ::= { mplsFlowSpecClasses 1 } mplsPreemptionEntry OBJECT-TYPE SYNTAX MplsPreemptionEntry STATUS current DESCRIPTION "An instance of this class describes a LSP Preemption object. " PIB-INDEX { mplsPreemptionPrid } ::= { mplsPreemptionTable 1 } MplsPreemptionEntry ::= SEQUENCE { mplsPreemptionPrid InstanceId, mplsPreemptionSetupPrio Unsigned32, mplsPreemptionHoldPrio Unsigned32 } mplsPreemptionPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsPreemptionEntry class." ::= { mplsPreemptionEntry 1 } mplsPreemptionSetupPrio OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Indicates MPLS LSP Setup Priority." ::= { mplsPreemptionEntry 2 } mplsPreemptionHoldPrio OBJECT-TYPE SYNTAX Unsigned32 STATUS current DESCRIPTION "Indicates MPLS LSP Holding Priority." ::= { mplsPreemptionEntry 3 } -- -- LSP Setup Classes -- mplsLspClasses OBJECT IDENTIFIER ::= { mplsSetupPib 6 } -- -- LSP Table -- mplsLspTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspEntry PIB-ACCESS install STATUS current DESCRIPTION "This table consists of MPLS LSP Entrees. Entries in this table essentially point to instances of other PRCs such as FEC, Label Request, ERO, Flow Spec and Preemption to form complete LSPs." ::= { mplsLspClasses 1 } mplsLspEntry OBJECT-TYPE SYNTAX MplsLspEntry STATUS current DESCRIPTION "An instance of MPLS LSP. " PIB-INDEX { mplsLspPrid } ::= { mplsLspTable 1 } MplsLspEntry ::= SEQUENCE { mplsLspPrid InstanceId, mplsLspFec Prid, mplsLspLabReq Prid, mplsLspFlowSpec Prid, mplsLspPreemption ReferenceId, mplsLspEroList TagReference } mplsLspPrid OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An integer index that uniquely identifies an instance of the mplsLspEntry class." ::= { mplsLspEntry 1 } mplsLspFec OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "This points to an instance of one type of FEC. It could be an instance of mplsFecIPv4HostAddrEntry, mplsFecIPv6HostAddrEntry, mplsFecIPv4PrefixEntry, mplsFecIPv6PrefixEntry, mplsFecASEntry." ::= { mplsLspEntry 2 } mplsLspLabReq OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "This points to an instance of one type of Label Request Object. It could be an instance of mplsLabReqGenericEntry, mplsLabReqATMEntry, mplsLabReqFREntry." ::= { mplsLspEntry 3 } mplsLspFlowSpec OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "This points to an instance of one type of FlowSpec. It could be an instance of mplsFlowSpecCRLDPEntry, mplsFlowSpecCLSEntry, mplsFlowSpecGSEntry." ::= { mplsLspEntry 4 } mplsLspPreemption OBJECT-TYPE SYNTAX ReferenceId PIB-REFERENCES { mplsPreemptionEntry } STATUS current DESCRIPTION "This points to an instance of mplsPreemptionEntry." ::= { mplsLspEntry 5 } mplsLspEroList OBJECT-TYPE SYNTAX TagReference PIB-TAG { mplsEroGroupId } STATUS current DESCRIPTION "This references a Tag Id attribute in mplsEroGroup table. All the entries in mplsEroGroup table that have this Tag Id form the ERO List that is used for this LSP entry." ::= { mplsLspEntry 6 } END